scip_sepa.h

Go to the documentation of this file.

/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/*                                                                           */
/*                  This file is part of the program and library             */
/*         SCIP --- Solving Constraint Integer Programs                      */
/*                                                                           */
/*  Copyright (c) 2002-2024 Zuse Institute Berlin (ZIB)                      */
/*                                                                           */
/*  Licensed under the Apache License, Version 2.0 (the "License");          */
/*  you may not use this file except in compliance with the License.         */
/*  You may obtain a copy of the License at                                  */
/*                                                                           */
/*      http://www.apache.org/licenses/LICENSE-2.0                           */
/*                                                                           */
/*  Unless required by applicable law or agreed to in writing, software      */
/*  distributed under the License is distributed on an "AS IS" BASIS,        */
/*  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. */
/*  See the License for the specific language governing permissions and      */
/*  limitations under the License.                                           */
/*                                                                           */
/*  You should have received a copy of the Apache-2.0 license                */
/*  along with SCIP; see the file LICENSE. If not visit scipopt.org.         */
/*                                                                           */
/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
/**@file   scip_sepa.h
 * @ingroup PUBLICCOREAPI
 * @brief  public methods for separator plugins
 * @author Tobias Achterberg
 * @author Timo Berthold
 * @author Thorsten Koch
 * @author Alexander Martin
 * @author Marc Pfetsch
 * @author Kati Wolter
 * @author Gregor Hendel
 * @author Leona Gottwald
 */
 
/*---+----1----+----2----+----3----+----4----+----5----+----6----+----7----+----8----+----9----+----0----+----1----+----2*/
 
#ifndef __SCIP_SCIP_SEPA_H__
#define __SCIP_SCIP_SEPA_H__
 
 
#include "scip/def.h"
#include "scip/type_result.h"
#include "scip/type_retcode.h"
#include "scip/type_scip.h"
#include "scip/type_sepa.h"
#include "scip/type_sol.h"
 
/* In debug mode, we include the SCIP's structure in scip.c, such that no one can access
 * this structure except the interface methods in scip.c.
 * In optimized mode, the structure is included in scip.h, because some of the methods
 * are implemented as defines for performance reasons (e.g. the numerical comparisons).
 * Additionally, the internal "set.h" is included, such that the defines in set.h are
 * available in optimized mode.
 */
#ifdef NDEBUG
#include "scip/struct_scip.h"
#include "scip/struct_set.h"
#include "scip/tree.h"
#endif
 
#ifdef __cplusplus
extern "C" {
#endif
 
/**@addtogroup PublicSeparatorMethods
 *
 * @{
 */
 
/** creates a separator and includes it in SCIP.
 *
 *  @note method has all separator callbacks as arguments and is thus changed every time a new
 *        callback is added
 *        in future releases; consider using SCIPincludeSepaBasic() and setter functions
 *        if you seek for a method which is less likely to change in future releases
 */
SCIP_EXPORT
SCIP_RETCODE SCIPincludeSepa(
   SCIP*                 scip,               /**< SCIP data structure */
   const char*           name,               /**< name of separator */
   const char*           desc,               /**< description of separator */
   int                   priority,           /**< priority of separator (>= 0: before, < 0: after constraint handlers) */
   int                   freq,               /**< frequency for calling separator */
   SCIP_Real             maxbounddist,       /**< maximal relative distance from current node's dual bound to primal bound compared
                                              *   to best node's dual bound for applying separation */
   SCIP_Bool             usessubscip,        /**< does the separator use a secondary SCIP instance? */
   SCIP_Bool             delay,              /**< should separator be delayed, if other separators found cuts? */
   SCIP_DECL_SEPACOPY    ((*sepacopy)),      /**< copy method of separator or NULL if you don't want to copy your plugin into sub-SCIPs */
   SCIP_DECL_SEPAFREE    ((*sepafree)),      /**< destructor of separator */
   SCIP_DECL_SEPAINIT    ((*sepainit)),      /**< initialize separator */
   SCIP_DECL_SEPAEXIT    ((*sepaexit)),      /**< deinitialize separator */
   SCIP_DECL_SEPAINITSOL ((*sepainitsol)),   /**< solving process initialization method of separator */
   SCIP_DECL_SEPAEXITSOL ((*sepaexitsol)),   /**< solving process deinitialization method of separator */
   SCIP_DECL_SEPAEXECLP  ((*sepaexeclp)),    /**< LP solution separation method of separator */
   SCIP_DECL_SEPAEXECSOL ((*sepaexecsol)),   /**< arbitrary primal solution separation method of separator */
   SCIP_SEPADATA*        sepadata            /**< separator data */
   );
 
/** creates a separator and includes it in SCIP with its most fundamental callbacks. All non-fundamental
 *  (or optional) callbacks as, e.g., init and exit callbacks, will be set to NULL.
 *  Optional callbacks can be set via specific setter functions, see SCIPsetSepaInit(), SCIPsetSepaFree(),
 *  SCIPsetSepaInitsol(), SCIPsetSepaExitsol(), SCIPsetSepaCopy(), SCIPsetExit().
 *
 *  @note if you want to set all callbacks with a single method call, consider using SCIPincludeSepa() instead
 */
SCIP_EXPORT
SCIP_RETCODE SCIPincludeSepaBasic(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SEPA**           sepa,               /**< reference to a separator, or NULL */
   const char*           name,               /**< name of separator */
   const char*           desc,               /**< description of separator */
   int                   priority,           /**< priority of separator (>= 0: before, < 0: after constraint handlers) */
   int                   freq,               /**< frequency for calling separator */
   SCIP_Real             maxbounddist,       /**< maximal relative distance from current node's dual bound to primal bound compared
                                              *   to best node's dual bound for applying separation */
   SCIP_Bool             usessubscip,        /**< does the separator use a secondary SCIP instance? */
   SCIP_Bool             delay,              /**< should separator be delayed, if other separators found cuts? */
   SCIP_DECL_SEPAEXECLP  ((*sepaexeclp)),    /**< LP solution separation method of separator */
   SCIP_DECL_SEPAEXECSOL ((*sepaexecsol)),   /**< arbitrary primal solution separation method of separator */
   SCIP_SEPADATA*        sepadata            /**< separator data */
   );
 
/** sets copy method of separator */
SCIP_EXPORT
SCIP_RETCODE SCIPsetSepaCopy(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SEPA*            sepa,               /**< separator */
   SCIP_DECL_SEPACOPY    ((*sepacopy))       /**< copy method of separator or NULL if you don't want to copy your plugin into sub-SCIPs */
   );
 
/** sets destructor method of separator */
SCIP_EXPORT
SCIP_RETCODE SCIPsetSepaFree(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SEPA*            sepa,               /**< separator */
   SCIP_DECL_SEPAFREE    ((*sepafree))       /**< destructor of separator */
   );
 
/** sets initialization method of separator */
SCIP_EXPORT
SCIP_RETCODE SCIPsetSepaInit(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SEPA*            sepa,               /**< separator */
   SCIP_DECL_SEPAINIT    ((*sepainit))       /**< initialize separator */
   );
 
/** sets deinitialization method of separator */
SCIP_EXPORT
SCIP_RETCODE SCIPsetSepaExit(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SEPA*            sepa,               /**< separator */
   SCIP_DECL_SEPAEXIT    ((*sepaexit))       /**< deinitialize separator */
   );
 
/** sets solving process initialization method of separator */
SCIP_EXPORT
SCIP_RETCODE SCIPsetSepaInitsol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SEPA*            sepa,               /**< separator */
   SCIP_DECL_SEPAINITSOL ((*sepainitsol))    /**< solving process initialization method of separator */
   );
 
/** sets solving process deinitialization method of separator */
SCIP_EXPORT
SCIP_RETCODE SCIPsetSepaExitsol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SEPA*            sepa,               /**< separator */
   SCIP_DECL_SEPAEXITSOL ((*sepaexitsol))    /**< solving process deinitialization method of separator */
   );
 
/** returns the separator of the given name, or NULL if not existing */
SCIP_EXPORT
SCIP_SEPA* SCIPfindSepa(
   SCIP*                 scip,               /**< SCIP data structure */
   const char*           name                /**< name of separator */
   );
 
/** returns the array of currently available separators */
SCIP_EXPORT
SCIP_SEPA** SCIPgetSepas(
   SCIP*                 scip                /**< SCIP data structure */
   );
 
/** returns the number of currently available separators */
SCIP_EXPORT
int SCIPgetNSepas(
   SCIP*                 scip                /**< SCIP data structure */
   );
 
/** sets the priority of a separator */
SCIP_EXPORT
SCIP_RETCODE SCIPsetSepaPriority(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SEPA*            sepa,               /**< separator */
   int                   priority            /**< new priority of the separator */
   );
 
/** declares separator to be a parent separator
 *
 *  Parent separators generate cuts of several types. To distinguish these cuts, they create child separators, which are
 *  only needed to detect which cuts are applied.
 */
SCIP_EXPORT
void SCIPsetSepaIsParentsepa(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SEPA*            sepa                /**< separator */
   );
 
/** sets the parent separator
 *
 *  Informs SCIP that the separator @p sepa depends on the parent separator @p parentsepa.
 */
SCIP_EXPORT
void SCIPsetSepaParentsepa(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SEPA*            sepa,               /**< separator */
   SCIP_SEPA*            parentsepa          /**< parent separator */
   );
 
/** gets value of minimal efficacy for a cut to enter the LP
 *
 *  @pre This method can be called if @p scip is in one of the following stages:
 *       - \ref SCIP_STAGE_SOLVING
 *
 *  @return value of "separating/minefficacyroot" if at root node, otherwise value of "separating/minefficacy"
 */
SCIP_EXPORT
SCIP_Real SCIPgetSepaMinEfficacy(
   SCIP*                 scip                /**< SCIP data structure */
   );
 
#ifdef NDEBUG
#define SCIPgetSepaMinEfficacy(scip)         (SCIPtreeGetCurrentDepth((scip)->tree) == 0 ? (scip)->set->sepa_minefficacyroot : (scip)->set->sepa_minefficacy)
#endif
 
/** @} */
 
#ifdef __cplusplus
}
#endif
 
#endif