Detailed Description
type definitions for problem variables
This file defines the interface for user variable data implemented in C. Each variable can be equipped with a variable data struct. This data can be accessed via the function SCIPgetVardata() at any time after it is created and before it is deleted.
Definition in file type_var.h.
Go to the source code of this file.
Macros | |
#define | NLOCKTYPES 2 |
#define | SCIP_DECL_VARDELORIG(x) SCIP_RETCODE x (SCIP* scip, SCIP_VAR* var, SCIP_VARDATA** vardata) |
#define | SCIP_DECL_VARTRANS(x) SCIP_RETCODE x (SCIP* scip, SCIP_VAR* sourcevar, SCIP_VARDATA* sourcedata, SCIP_VAR* targetvar, SCIP_VARDATA** targetdata) |
#define | SCIP_DECL_VARDELTRANS(x) SCIP_RETCODE x (SCIP* scip, SCIP_VAR* var, SCIP_VARDATA** vardata) |
#define | SCIP_DECL_VARCOPY(x) |
Enumerations | |
enum | SCIP_Varstatus { SCIP_VARSTATUS_ORIGINAL = 0, SCIP_VARSTATUS_LOOSE = 1, SCIP_VARSTATUS_COLUMN = 2, SCIP_VARSTATUS_FIXED = 3, SCIP_VARSTATUS_AGGREGATED = 4, SCIP_VARSTATUS_MULTAGGR = 5, SCIP_VARSTATUS_NEGATED = 6 } |
enum | SCIP_Vartype { SCIP_VARTYPE_BINARY = 0, SCIP_VARTYPE_INTEGER = 1, SCIP_VARTYPE_IMPLINT = 2, SCIP_VARTYPE_CONTINUOUS = 3 } |
enum | SCIP_DomchgType { SCIP_DOMCHGTYPE_DYNAMIC = 0, SCIP_DOMCHGTYPE_BOTH = 1, SCIP_DOMCHGTYPE_BOUND = 2 } |
enum | SCIP_BoundchgType { SCIP_BOUNDCHGTYPE_BRANCHING = 0, SCIP_BOUNDCHGTYPE_CONSINFER = 1, SCIP_BOUNDCHGTYPE_PROPINFER = 2 } |
enum | SCIP_LockType { SCIP_LOCKTYPE_MODEL = 0, SCIP_LOCKTYPE_CONFLICT = 1 } |
Macro Definition Documentation
◆ NLOCKTYPES
#define NLOCKTYPES 2 |
types of variable locks number of lock types
Definition at line 81 of file type_var.h.
Referenced by chgLinearCoefPos(), SCIPconsAddLocks(), SCIPconsCreate(), SCIPconsGetNLocksTypeNeg(), SCIPconsGetNLocksTypePos(), SCIPconsIsLockedType(), SCIPconsIsLockedTypeNeg(), SCIPconsIsLockedTypePos(), SCIPlockVarCons(), SCIPunlockVarCons(), SCIPvarAddLocks(), SCIPvarAggregate(), SCIPvarGetNLocksDownType(), SCIPvarGetNLocksUpType(), SCIPvarMultiaggregate(), SCIPvarTransform(), splitOffLinearPart(), and varCreate().
◆ SCIP_DECL_VARDELORIG
#define SCIP_DECL_VARDELORIG | ( | x | ) | SCIP_RETCODE x (SCIP* scip, SCIP_VAR* var, SCIP_VARDATA** vardata) |
frees user data of original variable (called when the original variable is freed)
This method should free the user data of the original variable.
input:
- scip : SCIP main data structure
- var : original variable the data to free is belonging to
- vardata : pointer to the user variable data to free
Definition at line 118 of file type_var.h.
◆ SCIP_DECL_VARTRANS
#define SCIP_DECL_VARTRANS | ( | x | ) | SCIP_RETCODE x (SCIP* scip, SCIP_VAR* sourcevar, SCIP_VARDATA* sourcedata, SCIP_VAR* targetvar, SCIP_VARDATA** targetdata) |
creates transformed variable for original user variable
Because the original variable and the user data of the original variable should not be modified during the solving process, a transformed variable is created as a copy of the original variable. If the user variable data is never modified during the solving process anyways, it is enough to simple copy the user data's pointer. This is the default implementation, which is used when a NULL is given as VARTRANS method. If the user data may be modified during the solving process (e.g. during preprocessing), the VARTRANS method must be given and has to copy the user variable data to a different memory location.
input:
- scip : SCIP main data structure
- sourcevar : original variable
- sourcedata : source variable data to transform
- targetvar : transformed variable
- targetdata : pointer to store created transformed variable data
Definition at line 138 of file type_var.h.
◆ SCIP_DECL_VARDELTRANS
#define SCIP_DECL_VARDELTRANS | ( | x | ) | SCIP_RETCODE x (SCIP* scip, SCIP_VAR* var, SCIP_VARDATA** vardata) |
frees user data of transformed variable (called when the transformed variable is freed)
This method has to be implemented, if the VARTRANS method is not a simple pointer copy operation like in the default VARTRANS implementation. It should free the user data of the transformed variable, that was created in the VARTRANS method.
input:
- scip : SCIP main data structure
- var : transformed variable the data to free is belonging to
- vardata : pointer to the user variable data to free
Definition at line 151 of file type_var.h.
◆ SCIP_DECL_VARCOPY
#define SCIP_DECL_VARCOPY | ( | x | ) |
copies variable data of source SCIP variable for the target SCIP variable
This method should copy the variable data of the source SCIP and create a target variable data for target variable. This callback is optimal. If the copying process was successful the target variable gets this variable data assigned. In case the result pointer is set to SCIP_DIDNOTRUN the target variable will have no variable data at all.
The variable map and the constraint map can be used via the function SCIPgetVarCopy() and SCIPgetConsCopy(), respectively, to get for certain variables and constraints of the source SCIP the counter parts in the target SCIP. You should be very carefully in using these two methods since they could lead to infinity loop.
input:
- scip : target SCIP data structure
- sourcescip : source SCIP main data structure
- sourcevar : variable of the source SCIP
- sourcedata : variable data of the source variable which should get copied
- varmap, : a hashmap which stores the mapping of source variables to corresponding target variables
- consmap, : a hashmap which stores the mapping of source constraints to corresponding target constraints
- targetvar : variable of the (target) SCIP (targetvar is the copy of sourcevar)
- targetdata : pointer to store created copy of the variable data for the (target) SCIP
output:
- result : pointer to store the result of the call
possible return values for *result:
- SCIP_DIDNOTRUN : the copying process was not performed
- SCIP_SUCCESS : the copying process was successfully performed
Definition at line 181 of file type_var.h.
Typedef Documentation
◆ SCIP_VARSTATUS
typedef enum SCIP_Varstatus SCIP_VARSTATUS |
Definition at line 48 of file type_var.h.
◆ SCIP_VARTYPE
typedef enum SCIP_Vartype SCIP_VARTYPE |
Definition at line 60 of file type_var.h.
◆ SCIP_DOMCHGTYPE
typedef enum SCIP_DomchgType SCIP_DOMCHGTYPE |
Definition at line 69 of file type_var.h.
◆ SCIP_BOUNDCHGTYPE
typedef enum SCIP_BoundchgType SCIP_BOUNDCHGTYPE |
Definition at line 78 of file type_var.h.
◆ SCIP_LOCKTYPE
typedef enum SCIP_LockType SCIP_LOCKTYPE |
Definition at line 87 of file type_var.h.
◆ SCIP_DOMCHGBOUND
typedef struct SCIP_DomChgBound SCIP_DOMCHGBOUND |
static domain change data for bound changes
Definition at line 89 of file type_var.h.
◆ SCIP_DOMCHGBOTH
typedef struct SCIP_DomChgBoth SCIP_DOMCHGBOTH |
static domain change data for bound and hole changes
Definition at line 90 of file type_var.h.
◆ SCIP_DOMCHGDYN
typedef struct SCIP_DomChgDyn SCIP_DOMCHGDYN |
dynamic domain change data for bound and hole changes
Definition at line 91 of file type_var.h.
◆ SCIP_DOMCHG
typedef union SCIP_DomChg SCIP_DOMCHG |
changes in domains of variables
Definition at line 92 of file type_var.h.
◆ SCIP_BOUNDCHG
typedef struct SCIP_BoundChg SCIP_BOUNDCHG |
changes in bounds of variables
Definition at line 93 of file type_var.h.
◆ SCIP_BDCHGIDX
typedef struct SCIP_BdChgIdx SCIP_BDCHGIDX |
bound change index in path from root to current node
Definition at line 94 of file type_var.h.
◆ SCIP_BDCHGINFO
typedef struct SCIP_BdChgInfo SCIP_BDCHGINFO |
bound change information to track bound changes from root to current node
Definition at line 95 of file type_var.h.
◆ SCIP_BRANCHINGDATA
typedef struct SCIP_BranchingData SCIP_BRANCHINGDATA |
data for branching decision bound changes
Definition at line 96 of file type_var.h.
◆ SCIP_INFERENCEDATA
typedef struct SCIP_InferenceData SCIP_INFERENCEDATA |
data for inferred bound changes
Definition at line 97 of file type_var.h.
◆ SCIP_HOLECHG
typedef struct SCIP_HoleChg SCIP_HOLECHG |
changes in holelist of variables
Definition at line 98 of file type_var.h.
◆ SCIP_HOLE
hole in a domain of an integer variable
Definition at line 99 of file type_var.h.
◆ SCIP_HOLELIST
typedef struct SCIP_Holelist SCIP_HOLELIST |
list of holes in a domain of an integer variable
Definition at line 100 of file type_var.h.
◆ SCIP_DOM
datastructures for storing domains of variables
Definition at line 101 of file type_var.h.
◆ SCIP_ORIGINAL
typedef struct SCIP_Original SCIP_ORIGINAL |
original variable information
Definition at line 102 of file type_var.h.
◆ SCIP_AGGREGATE
typedef struct SCIP_Aggregate SCIP_AGGREGATE |
aggregation information
Definition at line 103 of file type_var.h.
◆ SCIP_MULTAGGR
typedef struct SCIP_Multaggr SCIP_MULTAGGR |
multiple aggregation information
Definition at line 104 of file type_var.h.
◆ SCIP_NEGATE
typedef struct SCIP_Negate SCIP_NEGATE |
negation information
Definition at line 105 of file type_var.h.
◆ SCIP_VAR
variable of the problem
Definition at line 106 of file type_var.h.
◆ SCIP_VARDATA
typedef struct SCIP_VarData SCIP_VARDATA |
user variable data
Definition at line 107 of file type_var.h.
Enumeration Type Documentation
◆ SCIP_Varstatus
enum SCIP_Varstatus |
status of problem variables
Definition at line 38 of file type_var.h.
◆ SCIP_Vartype
enum SCIP_Vartype |
variable type
Definition at line 51 of file type_var.h.
◆ SCIP_DomchgType
enum SCIP_DomchgType |
domain change data type
Definition at line 63 of file type_var.h.
◆ SCIP_BoundchgType
enum SCIP_BoundchgType |
bound change type
Definition at line 72 of file type_var.h.
◆ SCIP_LockType
enum SCIP_LockType |
Enumerator | |
---|---|
SCIP_LOCKTYPE_MODEL | variable locks for model and check constraints |
SCIP_LOCKTYPE_CONFLICT | variable locks for conflict constraints |
Definition at line 82 of file type_var.h.