Detailed Description
internal methods for constraints and constraint handlers
Definition in file cons.h.
#include "scip/def.h"
#include "blockmemshell/memory.h"
#include "scip/type_retcode.h"
#include "scip/type_result.h"
#include "scip/type_set.h"
#include "scip/type_stat.h"
#include "scip/type_mem.h"
#include "scip/type_misc.h"
#include "scip/type_timing.h"
#include "scip/type_lp.h"
#include "scip/type_var.h"
#include "scip/type_prob.h"
#include "scip/type_sol.h"
#include "scip/type_tree.h"
#include "scip/type_sepastore.h"
#include "scip/type_cons.h"
#include "scip/type_branch.h"
#include "scip/type_reopt.h"
#include "scip/pub_cons.h"
#include "scip/struct_cons.h"
Go to the source code of this file.
Function Documentation
◆ SCIPconshdlrCopyInclude()
SCIP_RETCODE SCIPconshdlrCopyInclude | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_SET * | set, | ||
SCIP_Bool * | valid | ||
) |
copies the given constraint handler to a new scip
- Parameters
-
conshdlr constraint handler set SCIP_SET of SCIP to copy to valid was the copying process valid?
Definition at line 1969 of file cons.c.
References doConshdlrCreate(), NULL, SCIP_CALL, SCIP_OKAY, SCIPconshdlrGetName(), and SCIPsetDebugMsg.
Referenced by SCIP_DECL_PARAMCHGD().
◆ SCIPconshdlrCreate()
SCIP_RETCODE SCIPconshdlrCreate | ( | SCIP_CONSHDLR ** | conshdlr, |
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr, | ||
BMS_BLKMEM * | blkmem, | ||
const char * | name, | ||
const char * | desc, | ||
int | sepapriority, | ||
int | enfopriority, | ||
int | checkpriority, | ||
int | sepafreq, | ||
int | propfreq, | ||
int | eagerfreq, | ||
int | maxprerounds, | ||
SCIP_Bool | delaysepa, | ||
SCIP_Bool | delayprop, | ||
SCIP_Bool | needscons, | ||
SCIP_PROPTIMING | proptiming, | ||
SCIP_PRESOLTIMING | presoltiming, | ||
SCIP_DECL_CONSHDLRCOPY((*conshdlrcopy)) | , | ||
SCIP_DECL_CONSFREE((*consfree)) | , | ||
SCIP_DECL_CONSINIT((*consinit)) | , | ||
SCIP_DECL_CONSEXIT((*consexit)) | , | ||
SCIP_DECL_CONSINITPRE((*consinitpre)) | , | ||
SCIP_DECL_CONSEXITPRE((*consexitpre)) | , | ||
SCIP_DECL_CONSINITSOL((*consinitsol)) | , | ||
SCIP_DECL_CONSEXITSOL((*consexitsol)) | , | ||
SCIP_DECL_CONSDELETE((*consdelete)) | , | ||
SCIP_DECL_CONSTRANS((*constrans)) | , | ||
SCIP_DECL_CONSINITLP((*consinitlp)) | , | ||
SCIP_DECL_CONSSEPALP((*conssepalp)) | , | ||
SCIP_DECL_CONSSEPASOL((*conssepasol)) | , | ||
SCIP_DECL_CONSENFOLP((*consenfolp)) | , | ||
SCIP_DECL_CONSENFORELAX((*consenforelax)) | , | ||
SCIP_DECL_CONSENFOPS((*consenfops)) | , | ||
SCIP_DECL_CONSCHECK((*conscheck)) | , | ||
SCIP_DECL_CONSPROP((*consprop)) | , | ||
SCIP_DECL_CONSPRESOL((*conspresol)) | , | ||
SCIP_DECL_CONSRESPROP((*consresprop)) | , | ||
SCIP_DECL_CONSLOCK((*conslock)) | , | ||
SCIP_DECL_CONSACTIVE((*consactive)) | , | ||
SCIP_DECL_CONSDEACTIVE((*consdeactive)) | , | ||
SCIP_DECL_CONSENABLE((*consenable)) | , | ||
SCIP_DECL_CONSDISABLE((*consdisable)) | , | ||
SCIP_DECL_CONSDELVARS((*consdelvars)) | , | ||
SCIP_DECL_CONSPRINT((*consprint)) | , | ||
SCIP_DECL_CONSCOPY((*conscopy)) | , | ||
SCIP_DECL_CONSPARSE((*consparse)) | , | ||
SCIP_DECL_CONSGETVARS((*consgetvars)) | , | ||
SCIP_DECL_CONSGETNVARS((*consgetnvars)) | , | ||
SCIP_DECL_CONSGETDIVEBDCHGS((*consgetdivebdchgs)) | , | ||
SCIP_CONSHDLRDATA * | conshdlrdata | ||
) |
creates a constraint handler
- Parameters
-
conshdlr pointer to constraint handler data structure set global SCIP settings messagehdlr message handler blkmem block memory for parameter settings name name of constraint handler desc description of constraint handler sepapriority priority of the constraint handler for separation enfopriority priority of the constraint handler for constraint enforcing checkpriority priority of the constraint handler for checking feasibility (and propagation) sepafreq frequency for separating cuts; zero means to separate only in the root node propfreq frequency for propagating domains; zero means only preprocessing propagation eagerfreq frequency for using all instead of only the useful constraints in separation, propagation and enforcement, -1 for no eager evaluations, 0 for first only maxprerounds maximal number of presolving rounds the constraint handler participates in (-1: no limit) delaysepa should separation method be delayed, if other separators found cuts? delayprop should propagation method be delayed, if other propagators found reductions? needscons should the constraint handler be skipped, if no constraints are available? proptiming positions in the node solving loop where propagation method of constraint handlers should be executed presoltiming timing mask of the constraint handler's presolving method conshdlrdata constraint handler data
Definition at line 2269 of file cons.c.
References doConshdlrCreate(), NULL, SCIP_CALL_FINALLY, SCIP_OKAY, and SCIPconshdlrFree().
Referenced by doConshdlrCreate(), SCIPincludeConshdlr(), and SCIPincludeConshdlrBasic().
◆ SCIPconshdlrFree()
SCIP_RETCODE SCIPconshdlrFree | ( | SCIP_CONSHDLR ** | conshdlr, |
SCIP_SET * | set | ||
) |
calls destructor and frees memory of constraint handler
- Parameters
-
conshdlr pointer to constraint handler data structure set global SCIP settings
Definition at line 2344 of file cons.c.
References BMSfreeMemory, BMSfreeMemoryArrayNull, NULL, SCIP_CALL, SCIP_OKAY, SCIPclockFree(), and SCIPconshdlrInit().
Referenced by SCIPconshdlrCreate().
◆ SCIPconshdlrInit()
SCIP_RETCODE SCIPconshdlrInit | ( | SCIP_CONSHDLR * | conshdlr, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat | ||
) |
calls init method of constraint handler
calls initialization method of constraint handler
- Parameters
-
conshdlr constraint handler blkmem block memory set global SCIP settings stat dynamic problem statistics
Definition at line 2389 of file cons.c.
References SCIP_Conshdlr::ageresetavg, AGERESETAVG_INIT, SCIP_Conshdlr::checktime, conshdlrAreUpdatesDelayed(), conshdlrDelayUpdates(), conshdlrForceUpdates(), SCIP_Conshdlr::conss, SCIP_Conshdlr::enfolptime, SCIP_Conshdlr::enfopstime, SCIP_Conshdlr::enforelaxtime, FALSE, SCIP_Conshdlr::initialized, SCIP_Conshdlr::lastenfolpdomchgcount, SCIP_Conshdlr::lastenfolplpcount, SCIP_Conshdlr::lastenfolpnode, SCIP_Conshdlr::lastenfolpresult, SCIP_Conshdlr::lastenfopsdomchgcount, SCIP_Conshdlr::lastenfopsnode, SCIP_Conshdlr::lastenfopsresult, SCIP_Conshdlr::lastenforelaxdomchgcount, SCIP_Conshdlr::lastenforelaxrelaxcount, SCIP_Conshdlr::lastnaddconss, SCIP_Conshdlr::lastnaddholes, SCIP_Conshdlr::lastnaggrvars, SCIP_Conshdlr::lastnchgbds, SCIP_Conshdlr::lastnchgcoefs, SCIP_Conshdlr::lastnchgsides, SCIP_Conshdlr::lastnchgvartypes, SCIP_Conshdlr::lastndelconss, SCIP_Conshdlr::lastnfixedvars, SCIP_Conshdlr::lastnupgdconss, SCIP_Conshdlr::lastnusefulenfoconss, SCIP_Conshdlr::lastnusefulpropconss, SCIP_Conshdlr::lastnusefulsepaconss, SCIP_Conshdlr::lastpropdomchgcount, SCIP_Conshdlr::lastsepalpcount, SCIP_Conshdlr::maxnactiveconss, SCIP_Conshdlr::nactiveconss, SCIP_Conshdlr::naddconss, SCIP_Conshdlr::naddholes, SCIP_Conshdlr::naggrvars, SCIP_Conshdlr::name, SCIP_Conshdlr::ncheckcalls, SCIP_Conshdlr::nchgbds, SCIP_Conshdlr::nchgcoefs, SCIP_Conshdlr::nchgsides, SCIP_Conshdlr::nchgvartypes, SCIP_Conshdlr::nchildren, SCIP_Conshdlr::nconss, SCIP_Conshdlr::nconssfound, SCIP_Conshdlr::ncutoffs, SCIP_Conshdlr::ncutsapplied, SCIP_Conshdlr::ncutsfound, SCIP_Conshdlr::ndelconss, SCIP_Conshdlr::ndomredsfound, SCIP_Conshdlr::nenfolpcalls, SCIP_Conshdlr::nenfopscalls, SCIP_Conshdlr::nenforelaxcalls, SCIP_Conshdlr::nfixedvars, SCIP_Conshdlr::npresolcalls, SCIP_Conshdlr::npropcalls, SCIP_Conshdlr::nrespropcalls, SCIP_Conshdlr::nsepacalls, NULL, SCIP_Conshdlr::nupgdconss, SCIP_Conshdlr::presoltime, SCIP_Conshdlr::proptime, SCIP_Conshdlr::propwasdelayed, SCIP_Conshdlr::resproptime, SCIP_Conshdlr::sbproptime, SCIP_CALL, SCIP_DIDNOTRUN, SCIP_INVALIDCALL, SCIP_OKAY, SCIPclockReset(), SCIPclockStart(), SCIPclockStop(), SCIPconshdlrExit(), SCIPerrorMessage, SCIP_Conshdlr::sepalpwasdelayed, SCIP_Conshdlr::sepasolwasdelayed, SCIP_Conshdlr::sepatime, SCIP_Conshdlr::setuptime, SCIP_Conshdlr::startnactiveconss, and TRUE.
Referenced by SCIPconshdlrFree().
◆ SCIPconshdlrExit()
SCIP_RETCODE SCIPconshdlrExit | ( | SCIP_CONSHDLR * | conshdlr, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat | ||
) |
calls exit method of constraint handler
- Parameters
-
conshdlr constraint handler blkmem block memory set global SCIP settings stat dynamic problem statistics
Definition at line 2502 of file cons.c.
References conshdlrDelayUpdates(), conshdlrForceUpdates(), SCIP_Conshdlr::conss, FALSE, SCIP_Conshdlr::initialized, SCIP_Conshdlr::name, SCIP_Conshdlr::nconss, NULL, SCIP_CALL, SCIP_INVALIDCALL, SCIP_OKAY, SCIPclockStart(), SCIPclockStop(), SCIPconshdlrInitpre(), SCIPerrorMessage, and SCIP_Conshdlr::setuptime.
Referenced by SCIPconshdlrInit(), and SCIPsetInitPlugins().
◆ SCIPconshdlrInitpre()
SCIP_RETCODE SCIPconshdlrInitpre | ( | SCIP_CONSHDLR * | conshdlr, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat | ||
) |
informs constraint handler that the presolving process is being started
- Parameters
-
conshdlr constraint handler blkmem block memory set global SCIP settings stat dynamic problem statistics
Definition at line 2545 of file cons.c.
References SCIP_Cons::addarraypos, conshdlrAddInitcons(), conshdlrDelayUpdates(), conshdlrForceUpdates(), SCIP_Conshdlr::conss, SCIP_Cons::deleted, FALSE, SCIP_Cons::initconsspos, SCIP_Cons::initial, SCIP_Conshdlr::lastenfolpdomchgcount, SCIP_Conshdlr::lastenfolplpcount, SCIP_Conshdlr::lastenfolpnode, SCIP_Conshdlr::lastenfolpresult, SCIP_Conshdlr::lastenfopsdomchgcount, SCIP_Conshdlr::lastenfopsnode, SCIP_Conshdlr::lastenfopsresult, SCIP_Conshdlr::lastenforelaxdomchgcount, SCIP_Conshdlr::lastenforelaxrelaxcount, SCIP_Conshdlr::lastenforelaxresult, SCIP_Conshdlr::lastnaddconss, SCIP_Conshdlr::lastnaddholes, SCIP_Conshdlr::lastnaggrvars, SCIP_Conshdlr::lastnchgbds, SCIP_Conshdlr::lastnchgcoefs, SCIP_Conshdlr::lastnchgsides, SCIP_Conshdlr::lastnchgvartypes, SCIP_Conshdlr::lastndelconss, SCIP_Conshdlr::lastnfixedvars, SCIP_Conshdlr::lastnupgdconss, SCIP_Conshdlr::lastnusefulenfoconss, SCIP_Conshdlr::lastnusefulpropconss, SCIP_Conshdlr::lastnusefulsepaconss, SCIP_Conshdlr::lastpropdomchgcount, SCIP_Conshdlr::lastsepalpcount, SCIP_Conshdlr::maxnactiveconss, SCIP_Conshdlr::nactiveconss, SCIP_Conshdlr::nconss, SCIP_Stat::nruns, NULL, SCIP_Conshdlr::propwasdelayed, SCIP_CALL, SCIP_DIDNOTRUN, SCIP_OKAY, SCIPclockStart(), SCIPclockStop(), SCIPconshdlrExitpre(), SCIP_Conshdlr::setuptime, and SCIP_Conshdlr::startnactiveconss.
Referenced by SCIPconshdlrExit(), and SCIPsetExitPlugins().
◆ SCIPconshdlrExitpre()
SCIP_RETCODE SCIPconshdlrExitpre | ( | SCIP_CONSHDLR * | conshdlr, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat | ||
) |
informs constraint handler that the presolving is finished
- Parameters
-
conshdlr constraint handler blkmem block memory set global SCIP settings stat dynamic problem statistics
Definition at line 2631 of file cons.c.
References conshdlrDelayUpdates(), conshdlrForceUpdates(), SCIP_Conshdlr::conss, SCIP_Conshdlr::maxnactiveconss, SCIP_Conshdlr::nactiveconss, SCIP_Conshdlr::nconss, NULL, SCIP_CALL, SCIP_OKAY, SCIPclockStart(), SCIPclockStop(), SCIPconshdlrInitsol(), SCIP_Conshdlr::setuptime, and SCIP_Conshdlr::startnactiveconss.
Referenced by SCIPconshdlrInitpre(), and SCIPsetExitPlugins().
◆ SCIPconshdlrInitsol()
SCIP_RETCODE SCIPconshdlrInitsol | ( | SCIP_CONSHDLR * | conshdlr, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat | ||
) |
informs constraint handler that the branch and bound process is being started
- Parameters
-
conshdlr constraint handler blkmem block memory set global SCIP settings stat dynamic problem statistics
Definition at line 2671 of file cons.c.
References conshdlrDelayUpdates(), conshdlrForceUpdates(), SCIP_Conshdlr::conss, FALSE, SCIP_Conshdlr::nconss, NULL, SCIP_CALL, SCIP_OKAY, SCIPclockStart(), SCIPclockStop(), SCIPconshdlrExitsol(), SCIP_Conshdlr::sepalpwasdelayed, SCIP_Conshdlr::sepasolwasdelayed, and SCIP_Conshdlr::setuptime.
Referenced by SCIPconshdlrExitpre(), and SCIPsetInitprePlugins().
◆ SCIPconshdlrExitsol()
SCIP_RETCODE SCIPconshdlrExitsol | ( | SCIP_CONSHDLR * | conshdlr, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat, | ||
SCIP_Bool | restart | ||
) |
informs constraint handler that the branch and bound process data is being freed
- Parameters
-
conshdlr constraint handler blkmem block memory set global SCIP settings stat dynamic problem statistics restart was this exit solve call triggered by a restart?
Definition at line 2711 of file cons.c.
References conshdlrDelayUpdates(), conshdlrForceUpdates(), SCIP_Conshdlr::conss, SCIP_Conshdlr::nconss, NULL, SCIP_CALL, SCIP_OKAY, SCIPclockStart(), SCIPclockStop(), SCIPconshdlrInitLP(), and SCIP_Conshdlr::setuptime.
Referenced by SCIPconshdlrInitsol(), and SCIPsetInitsolPlugins().
◆ SCIPconshdlrInitLP()
SCIP_RETCODE SCIPconshdlrInitLP | ( | SCIP_CONSHDLR * | conshdlr, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat, | ||
SCIP_TREE * | tree, | ||
SCIP_Bool | initkeptconss, | ||
SCIP_Bool * | cutoff | ||
) |
calls LP initialization method of constraint handler to separate all initial active constraints
- Parameters
-
conshdlr constraint handler blkmem block memory set global SCIP settings stat dynamic problem statistics tree branch and bound tree initkeptconss Also initialize constraints which are valid at a more global node, but were not activated there? Should be FALSE for repeated calls at one node or if the current focusnode is a child of the former one cutoff pointer to store whether infeasibility was detected while building the LP
Definition at line 2748 of file cons.c.
References BMSfreeMemoryArrayNull, conshdlrAddInitcons(), conshdlrDelayUpdates(), conshdlrForceUpdates(), FALSE, SCIP_Conshdlr::initconss, SCIP_Cons::initconsspos, SCIP_Conshdlr::initconsssize, SCIP_Conshdlr::name, SCIP_Conshdlr::needscons, SCIP_Conshdlr::ninitconss, SCIP_Conshdlr::ninitconsskept, SCIP_Stat::nnodes, NULL, SCIP_CALL, SCIP_OKAY, SCIPclockStart(), SCIPclockStop(), SCIPconsGetActiveDepth(), SCIPconshdlrSeparateLP(), SCIPconsIsActive(), SCIPsetDebugMsg, SCIPtreeGetCurrentDepth(), SCIPtreeProbing(), and SCIP_Conshdlr::sepatime.
Referenced by SCIPconshdlrExitsol(), and SCIPinitConssLP().
◆ SCIPconshdlrSeparateLP()
SCIP_RETCODE SCIPconshdlrSeparateLP | ( | SCIP_CONSHDLR * | conshdlr, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat, | ||
SCIP_SEPASTORE * | sepastore, | ||
int | depth, | ||
SCIP_Bool | execdelayed, | ||
SCIP_RESULT * | result | ||
) |
calls separator method of constraint handler to separate LP solution
- Parameters
-
conshdlr constraint handler blkmem block memory set global SCIP settings stat dynamic problem statistics sepastore separation storage depth depth of current node execdelayed execute separation method even if it is marked to be delayed result pointer to store the result of the callback method
Definition at line 2855 of file cons.c.
References conshdlrDelayUpdates(), conshdlrForceUpdates(), SCIP_Conshdlr::delaysepa, SCIP_Conshdlr::duringsepa, SCIP_Conshdlr::eagerfreq, FALSE, SCIP_Conshdlr::lastnusefulsepaconss, SCIP_Conshdlr::lastsepalpcount, SCIP_Stat::lpcount, MAX, SCIP_Stat::nactiveconss, SCIP_Conshdlr::name, SCIP_Stat::nboundchgs, SCIP_Conshdlr::ncheckconss, SCIP_Conshdlr::nconssfound, SCIP_Conshdlr::ncutoffs, SCIP_Conshdlr::ncutsfound, SCIP_Conshdlr::ndomredsfound, SCIP_Conshdlr::needscons, SCIP_Conshdlr::nenfoconss, SCIP_Stat::nholechgs, SCIP_Stat::nprobboundchgs, SCIP_Stat::nprobholechgs, SCIP_Conshdlr::npropconss, SCIP_Conshdlr::nsepacalls, SCIP_Conshdlr::nsepaconss, NULL, SCIP_Conshdlr::nusefulcheckconss, SCIP_Conshdlr::nusefulenfoconss, SCIP_Conshdlr::nusefulpropconss, SCIP_Conshdlr::nusefulsepaconss, SCIP_CALL, SCIP_CONSADDED, SCIP_CUTOFF, SCIP_DELAYED, SCIP_DIDNOTFIND, SCIP_DIDNOTRUN, SCIP_INVALIDRESULT, SCIP_Longint, SCIP_NEWROUND, SCIP_OKAY, SCIP_REDUCEDDOM, SCIP_SEPARATED, SCIPclockStart(), SCIPclockStop(), SCIPconshdlrSeparateSol(), SCIPerrorMessage, SCIPsepastoreGetNCuts(), SCIPsetDebugMsg, SCIP_Conshdlr::sepaconss, SCIP_Conshdlr::sepafreq, SCIP_Conshdlr::sepalpwasdelayed, SCIP_Conshdlr::sepatime, and TRUE.
Referenced by SCIPconshdlrInitLP(), and separationRoundLP().
◆ SCIPconshdlrSeparateSol()
SCIP_RETCODE SCIPconshdlrSeparateSol | ( | SCIP_CONSHDLR * | conshdlr, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat, | ||
SCIP_SEPASTORE * | sepastore, | ||
SCIP_SOL * | sol, | ||
int | depth, | ||
SCIP_Bool | execdelayed, | ||
SCIP_RESULT * | result | ||
) |
calls separator method of constraint handler to separate given primal solution
- Parameters
-
conshdlr constraint handler blkmem block memory set global SCIP settings stat dynamic problem statistics sepastore separation storage sol primal solution that should be separated depth depth of current node execdelayed execute separation method even if it is marked to be delayed result pointer to store the result of the callback method
Definition at line 3012 of file cons.c.
References conshdlrDelayUpdates(), conshdlrForceUpdates(), SCIP_Conshdlr::delaysepa, SCIP_Conshdlr::duringsepa, SCIP_Conshdlr::eagerfreq, FALSE, MAX, SCIP_Stat::nactiveconss, SCIP_Conshdlr::name, SCIP_Stat::nboundchgs, SCIP_Conshdlr::ncheckconss, SCIP_Conshdlr::nconssfound, SCIP_Conshdlr::ncutoffs, SCIP_Conshdlr::ncutsfound, SCIP_Conshdlr::ndomredsfound, SCIP_Conshdlr::needscons, SCIP_Conshdlr::nenfoconss, SCIP_Stat::nholechgs, SCIP_Stat::nprobboundchgs, SCIP_Stat::nprobholechgs, SCIP_Conshdlr::npropconss, SCIP_Conshdlr::nsepacalls, SCIP_Conshdlr::nsepaconss, NULL, SCIP_Conshdlr::nusefulcheckconss, SCIP_Conshdlr::nusefulenfoconss, SCIP_Conshdlr::nusefulpropconss, SCIP_Conshdlr::nusefulsepaconss, SCIP_CALL, SCIP_CONSADDED, SCIP_CUTOFF, SCIP_DELAYED, SCIP_DIDNOTFIND, SCIP_DIDNOTRUN, SCIP_INVALIDRESULT, SCIP_Longint, SCIP_NEWROUND, SCIP_OKAY, SCIP_REDUCEDDOM, SCIP_SEPARATED, SCIPclockStart(), SCIPclockStop(), SCIPconshdlrEnforceRelaxSol(), SCIPerrorMessage, SCIPsepastoreGetNCuts(), SCIPsetDebugMsg, SCIP_Conshdlr::sepaconss, SCIP_Conshdlr::sepafreq, SCIP_Conshdlr::sepasolwasdelayed, SCIP_Conshdlr::sepatime, and TRUE.
Referenced by SCIPconshdlrSeparateLP(), and separationRoundSol().
◆ SCIPconshdlrEnforceRelaxSol()
SCIP_RETCODE SCIPconshdlrEnforceRelaxSol | ( | SCIP_CONSHDLR * | conshdlr, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat, | ||
SCIP_TREE * | tree, | ||
SCIP_SEPASTORE * | sepastore, | ||
SCIP_SOL * | relaxsol, | ||
SCIP_Bool | solinfeasible, | ||
SCIP_RESULT * | result | ||
) |
calls enforcing method of constraint handler for a relaxation solution for all constraints added after last conshdlrResetEnfo() call
- Parameters
-
conshdlr constraint handler blkmem block memory set global SCIP settings stat dynamic problem statistics tree branch and bound tree sepastore separation storage relaxsol solution to be enforced solinfeasible was the solution already found out to be infeasible? result pointer to store the result of the callback method
Definition at line 3141 of file cons.c.
References conshdlrDelayUpdates(), conshdlrForceUpdates(), SCIP_Stat::domchgcount, SCIP_Conshdlr::eagerfreq, SCIP_Conshdlr::enfoconss, SCIP_Conshdlr::enforelaxtime, FALSE, SCIP_Conshdlr::lastenfopsdomchgcount, SCIP_Conshdlr::lastenfopsnode, SCIP_Conshdlr::lastenforelaxdomchgcount, SCIP_Conshdlr::lastenforelaxnode, SCIP_Conshdlr::lastenforelaxrelaxcount, SCIP_Conshdlr::lastenforelaxresult, SCIP_Conshdlr::lastnusefulenfoconss, MAX, SCIP_Stat::nactiveconss, SCIP_Conshdlr::name, SCIP_Stat::nboundchgs, SCIP_Conshdlr::ncheckconss, SCIP_Conshdlr::nchildren, SCIP_Tree::nchildren, SCIP_Conshdlr::nconssfound, SCIP_Conshdlr::ncutoffs, SCIP_Conshdlr::ncutsfound, SCIP_Conshdlr::ndomredsfound, SCIP_Conshdlr::needscons, SCIP_Conshdlr::nenfoconss, SCIP_Conshdlr::nenforelaxcalls, SCIP_Stat::nholechgs, SCIP_Stat::nnodes, SCIP_Stat::nprobboundchgs, SCIP_Stat::nprobholechgs, SCIP_Conshdlr::npropconss, SCIP_Conshdlr::nsepaconss, NULL, SCIP_Conshdlr::nusefulcheckconss, SCIP_Conshdlr::nusefulenfoconss, SCIP_Conshdlr::nusefulpropconss, SCIP_Conshdlr::nusefulsepaconss, SCIP_Stat::relaxcount, SCIP_Bool, SCIP_BRANCHED, SCIP_CALL, SCIP_CONSADDED, SCIP_CUTOFF, SCIP_DIDNOTRUN, SCIP_FEASIBLE, SCIP_INFEASIBLE, SCIP_INVALIDRESULT, SCIP_Longint, SCIP_OKAY, SCIP_REDUCEDDOM, SCIP_SEPARATED, SCIP_SOLVELP, SCIPclockStart(), SCIPclockStop(), SCIPconshdlrEnforceLPSol(), SCIPdebugMessage, SCIPerrorMessage, SCIPsepastoreGetNCuts(), and TRUE.
Referenced by enforceConstraints(), and SCIPconshdlrSeparateSol().
◆ SCIPconshdlrEnforceLPSol()
SCIP_RETCODE SCIPconshdlrEnforceLPSol | ( | SCIP_CONSHDLR * | conshdlr, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat, | ||
SCIP_TREE * | tree, | ||
SCIP_SEPASTORE * | sepastore, | ||
SCIP_Bool | solinfeasible, | ||
SCIP_RESULT * | result | ||
) |
calls enforcing method of constraint handler for LP solution for all constraints added after last conshdlrReset() call
calls enforcing method of constraint handler for LP solution for all constraints added after last conshdlrResetEnfo() call
- Parameters
-
conshdlr constraint handler blkmem block memory set global SCIP settings stat dynamic problem statistics tree branch and bound tree sepastore separation storage solinfeasible was the solution already found out to be infeasible? result pointer to store the result of the callback method
Definition at line 3340 of file cons.c.
References conshdlrDelayUpdates(), conshdlrForceUpdates(), SCIP_Stat::domchgcount, SCIP_Conshdlr::eagerfreq, SCIP_Conshdlr::enfoconss, SCIP_Conshdlr::enfolptime, FALSE, SCIP_Conshdlr::lastenfolpdomchgcount, SCIP_Conshdlr::lastenfolplpcount, SCIP_Conshdlr::lastenfolpnode, SCIP_Conshdlr::lastenfolpresult, SCIP_Conshdlr::lastnusefulenfoconss, SCIP_Stat::lpcount, MAX, SCIP_Stat::nactiveconss, SCIP_Conshdlr::name, SCIP_Stat::nboundchgs, SCIP_Conshdlr::ncheckconss, SCIP_Conshdlr::nchildren, SCIP_Tree::nchildren, SCIP_Conshdlr::nconssfound, SCIP_Conshdlr::ncutoffs, SCIP_Conshdlr::ncutsfound, SCIP_Conshdlr::ndomredsfound, SCIP_Conshdlr::needscons, SCIP_Conshdlr::nenfoconss, SCIP_Conshdlr::nenfolpcalls, SCIP_Stat::nholechgs, SCIP_Stat::nnodes, SCIP_Stat::nprobboundchgs, SCIP_Stat::nprobholechgs, SCIP_Conshdlr::npropconss, SCIP_Conshdlr::nsepaconss, NULL, SCIP_Conshdlr::nusefulcheckconss, SCIP_Conshdlr::nusefulenfoconss, SCIP_Conshdlr::nusefulpropconss, SCIP_Conshdlr::nusefulsepaconss, SCIP_Bool, SCIP_BRANCHED, SCIP_CALL, SCIP_CONSADDED, SCIP_CUTOFF, SCIP_DIDNOTRUN, SCIP_FEASIBLE, SCIP_INFEASIBLE, SCIP_INVALIDRESULT, SCIP_Longint, SCIP_OKAY, SCIP_REDUCEDDOM, SCIP_SEPARATED, SCIP_SOLVELP, SCIPclockStart(), SCIPclockStop(), SCIPconshdlrGetDiveBoundChanges(), SCIPerrorMessage, SCIPsepastoreGetNCuts(), SCIPsetDebugMsg, and TRUE.
Referenced by enforceConstraints(), and SCIPconshdlrEnforceRelaxSol().
◆ SCIPconshdlrGetDiveBoundChanges()
SCIP_RETCODE SCIPconshdlrGetDiveBoundChanges | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_SET * | set, | ||
SCIP_DIVESET * | diveset, | ||
SCIP_SOL * | sol, | ||
SCIP_Bool * | success, | ||
SCIP_Bool * | infeasible | ||
) |
calls diving solution enforcement callback of constraint handler, if it exists
- Parameters
-
conshdlr constraint handler set global SCIP settings diveset diving settings to control scoring sol current solution of diving mode success pointer to store whether constraint handler successfully found a variable infeasible pointer to store whether the current node was detected to be infeasible
Definition at line 3519 of file cons.c.
References NULL, SCIP_CALL, SCIP_OKAY, and SCIPconshdlrEnforcePseudoSol().
Referenced by SCIPconshdlrEnforceLPSol(), and SCIPgetDiveBoundChanges().
◆ SCIPconshdlrEnforcePseudoSol()
SCIP_RETCODE SCIPconshdlrEnforcePseudoSol | ( | SCIP_CONSHDLR * | conshdlr, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat, | ||
SCIP_TREE * | tree, | ||
SCIP_BRANCHCAND * | branchcand, | ||
SCIP_Bool | solinfeasible, | ||
SCIP_Bool | objinfeasible, | ||
SCIP_Bool | forced, | ||
SCIP_RESULT * | result | ||
) |
calls enforcing method of constraint handler for pseudo solution for all constraints added after last conshdlrReset() call
calls enforcing method of constraint handler for pseudo solution for all constraints added after last conshdlrResetEnfo() call
- Parameters
-
conshdlr constraint handler blkmem block memory set global SCIP settings stat dynamic problem statistics tree branch and bound tree branchcand branching candidate storage solinfeasible was the solution already found out to be infeasible? objinfeasible is the solution infeasible anyway due to violating lower objective bound? forced should enforcement of pseudo solution be forced? result pointer to store the result of the callback method
Definition at line 3546 of file cons.c.
References conshdlrDelayUpdates(), conshdlrForceUpdates(), SCIP_Stat::domchgcount, SCIP_Conshdlr::eagerfreq, SCIP_Conshdlr::enfoconss, SCIP_Conshdlr::enfopstime, FALSE, SCIP_Conshdlr::lastenfopsdomchgcount, SCIP_Conshdlr::lastenfopsnode, SCIP_Conshdlr::lastenfopsresult, SCIP_Conshdlr::lastnusefulenfoconss, SCIP_Conshdlr::name, SCIP_Stat::nboundchgs, SCIP_Conshdlr::ncheckconss, SCIP_Conshdlr::nchildren, SCIP_Tree::nchildren, SCIP_Conshdlr::ncutoffs, SCIP_Conshdlr::ndomredsfound, SCIP_Conshdlr::needscons, SCIP_Conshdlr::nenfoconss, SCIP_Conshdlr::nenfopscalls, SCIP_Stat::nholechgs, SCIP_Stat::nnodes, SCIP_Stat::nprobboundchgs, SCIP_Stat::nprobholechgs, SCIP_Conshdlr::npropconss, SCIP_Conshdlr::nsepaconss, NULL, SCIP_Conshdlr::nusefulcheckconss, SCIP_Conshdlr::nusefulenfoconss, SCIP_Conshdlr::nusefulpropconss, SCIP_Conshdlr::nusefulsepaconss, SCIP_Bool, SCIP_BRANCHED, SCIP_CALL, SCIP_CONSADDED, SCIP_CUTOFF, SCIP_DIDNOTRUN, SCIP_FEASIBLE, SCIP_INFEASIBLE, SCIP_INVALIDRESULT, SCIP_Longint, SCIP_OKAY, SCIP_REDUCEDDOM, SCIP_SOLVELP, SCIPbranchcandGetNPseudoCands(), SCIPclockStart(), SCIPclockStop(), SCIPconshdlrCheck(), SCIPerrorMessage, SCIPsetDebugMsg, and TRUE.
Referenced by enforceConstraints(), and SCIPconshdlrGetDiveBoundChanges().
◆ SCIPconshdlrCheck()
SCIP_RETCODE SCIPconshdlrCheck | ( | SCIP_CONSHDLR * | conshdlr, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat, | ||
SCIP_SOL * | sol, | ||
SCIP_Bool | checkintegrality, | ||
SCIP_Bool | checklprows, | ||
SCIP_Bool | printreason, | ||
SCIP_Bool | completely, | ||
SCIP_RESULT * | result | ||
) |
calls feasibility check method of constraint handler
- Parameters
-
conshdlr constraint handler blkmem block memory set global SCIP settings stat dynamic problem statistics sol primal CIP solution checkintegrality Has integrality to be checked? checklprows Do constraints represented by rows in the current LP have to be checked? printreason Should the reason for the violation be printed? completely Should all violations be checked? result pointer to store the result of the callback method
Definition at line 3742 of file cons.c.
References SCIP_Conshdlr::checkconss, SCIP_Conshdlr::checktime, conshdlrDelayUpdates(), conshdlrForceUpdates(), SCIP_Conshdlr::name, SCIP_Conshdlr::ncheckcalls, SCIP_Conshdlr::ncheckconss, SCIP_Conshdlr::needscons, SCIP_Conshdlr::nenfoconss, SCIP_Conshdlr::npropconss, SCIP_Conshdlr::nsepaconss, NULL, SCIP_Conshdlr::nusefulcheckconss, SCIP_Conshdlr::nusefulenfoconss, SCIP_Conshdlr::nusefulpropconss, SCIP_Conshdlr::nusefulsepaconss, SCIP_CALL, SCIP_FEASIBLE, SCIP_INFEASIBLE, SCIP_INVALIDRESULT, SCIP_OKAY, SCIPclockStart(), SCIPclockStop(), SCIPconshdlrPropagate(), SCIPerrorMessage, and SCIPsetDebugMsg.
Referenced by checkSolOrig(), SCIPconshdlrEnforcePseudoSol(), and SCIPsolCheck().
◆ SCIPconshdlrPropagate()
SCIP_RETCODE SCIPconshdlrPropagate | ( | SCIP_CONSHDLR * | conshdlr, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat, | ||
int | depth, | ||
SCIP_Bool | fullpropagation, | ||
SCIP_Bool | execdelayed, | ||
SCIP_Bool | instrongbranching, | ||
SCIP_PROPTIMING | proptiming, | ||
SCIP_RESULT * | result | ||
) |
calls propagation method of constraint handler
- Parameters
-
conshdlr constraint handler blkmem block memory set global SCIP settings stat dynamic problem statistics depth depth of current node fullpropagation should all constraints be propagated (or only new ones)? execdelayed execute propagation method even if it is marked to be delayed instrongbranching are we currently doing strong branching? proptiming current point in the node solving process result pointer to store the result of the callback method
Definition at line 3804 of file cons.c.
References conshdlrDelayUpdates(), conshdlrForceUpdates(), SCIP_Conshdlr::delayprop, SCIP_Stat::domchgcount, SCIP_Conshdlr::duringprop, SCIP_Conshdlr::eagerfreq, FALSE, SCIP_Conshdlr::lastnusefulpropconss, SCIP_Conshdlr::lastpropdomchgcount, SCIP_Conshdlr::name, SCIP_Stat::nboundchgs, SCIP_Conshdlr::ncheckconss, SCIP_Conshdlr::ncutoffs, SCIP_Conshdlr::ndomredsfound, SCIP_Conshdlr::needscons, SCIP_Conshdlr::nenfoconss, SCIP_Stat::nholechgs, SCIP_Conshdlr::nmarkedpropconss, SCIP_Stat::nprobboundchgs, SCIP_Stat::nprobholechgs, SCIP_Conshdlr::npropcalls, SCIP_Conshdlr::npropconss, SCIP_Conshdlr::nsepaconss, NULL, SCIP_Conshdlr::nusefulcheckconss, SCIP_Conshdlr::nusefulenfoconss, SCIP_Conshdlr::nusefulpropconss, SCIP_Conshdlr::nusefulsepaconss, SCIP_Conshdlr::propconss, SCIP_Conshdlr::propfreq, SCIP_Conshdlr::proptime, SCIP_Conshdlr::propwasdelayed, SCIP_Conshdlr::sbproptime, SCIP_CALL, SCIP_CUTOFF, SCIP_DELAYED, SCIP_DELAYNODE, SCIP_DIDNOTFIND, SCIP_DIDNOTRUN, SCIP_INVALIDRESULT, SCIP_Longint, SCIP_OKAY, SCIP_REDUCEDDOM, SCIPclockStart(), SCIPclockStop(), SCIPconshdlrPresolve(), SCIPerrorMessage, SCIPsetDebugMsg, and TRUE.
Referenced by propagationRound(), and SCIPconshdlrCheck().
◆ SCIPconshdlrPresolve()
SCIP_RETCODE SCIPconshdlrPresolve | ( | SCIP_CONSHDLR * | conshdlr, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat, | ||
SCIP_PRESOLTIMING | timing, | ||
int | nrounds, | ||
int * | nfixedvars, | ||
int * | naggrvars, | ||
int * | nchgvartypes, | ||
int * | nchgbds, | ||
int * | naddholes, | ||
int * | ndelconss, | ||
int * | naddconss, | ||
int * | nupgdconss, | ||
int * | nchgcoefs, | ||
int * | nchgsides, | ||
SCIP_RESULT * | result | ||
) |
calls presolving method of constraint handler
- Parameters
-
conshdlr constraint handler blkmem block memory set global SCIP settings stat dynamic problem statistics timing current presolving timing nrounds number of presolving rounds already done nfixedvars pointer to total number of variables fixed of all presolvers naggrvars pointer to total number of variables aggregated of all presolvers nchgvartypes pointer to total number of variable type changes of all presolvers nchgbds pointer to total number of variable bounds tightened of all presolvers naddholes pointer to total number of domain holes added of all presolvers ndelconss pointer to total number of deleted constraints of all presolvers naddconss pointer to total number of added constraints of all presolvers nupgdconss pointer to total number of upgraded constraints of all presolvers nchgcoefs pointer to total number of changed coefficients of all presolvers nchgsides pointer to total number of changed left/right hand sides of all presolvers result pointer to store the result of the callback method
Definition at line 3975 of file cons.c.
References conshdlrDelayUpdates(), conshdlrForceUpdates(), SCIP_Conshdlr::conss, SCIP_Conshdlr::lastnaddconss, SCIP_Conshdlr::lastnaddholes, SCIP_Conshdlr::lastnaggrvars, SCIP_Conshdlr::lastnchgbds, SCIP_Conshdlr::lastnchgcoefs, SCIP_Conshdlr::lastnchgsides, SCIP_Conshdlr::lastnchgvartypes, SCIP_Conshdlr::lastndelconss, SCIP_Conshdlr::lastnfixedvars, SCIP_Conshdlr::lastnupgdconss, SCIP_Conshdlr::maxprerounds, SCIP_Conshdlr::nactiveconss, SCIP_Conshdlr::naddconss, SCIP_Conshdlr::naddholes, SCIP_Conshdlr::naggrvars, SCIP_Conshdlr::name, SCIP_Conshdlr::ncheckconss, SCIP_Conshdlr::nchgbds, SCIP_Conshdlr::nchgcoefs, SCIP_Conshdlr::nchgsides, SCIP_Conshdlr::nchgvartypes, SCIP_Conshdlr::ndelconss, SCIP_Conshdlr::needscons, SCIP_Conshdlr::nenfoconss, SCIP_Conshdlr::nfixedvars, SCIP_Conshdlr::npresolcalls, SCIP_Conshdlr::npropconss, SCIP_Conshdlr::nsepaconss, NULL, SCIP_Conshdlr::nupgdconss, SCIP_Conshdlr::nusefulcheckconss, SCIP_Conshdlr::nusefulenfoconss, SCIP_Conshdlr::nusefulpropconss, SCIP_Conshdlr::nusefulsepaconss, SCIP_Conshdlr::presoltime, SCIP_Conshdlr::presoltiming, SCIP_CALL, SCIP_CUTOFF, SCIP_DELAYED, SCIP_DIDNOTFIND, SCIP_DIDNOTRUN, SCIP_INVALIDRESULT, SCIP_OKAY, SCIP_SUCCESS, SCIP_UNBOUNDED, SCIPclockStart(), SCIPclockStop(), SCIPconshdlrDelVars(), SCIPerrorMessage, and SCIPsetDebugMsg.
Referenced by presolveRound(), and SCIPconshdlrPropagate().
◆ SCIPconshdlrEnableOrDisableClocks()
void SCIPconshdlrEnableOrDisableClocks | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_Bool | enable | ||
) |
enables or disables all clocks of conshdlr
, depending on the value of the flag
- Parameters
-
conshdlr the constraint handler for which all clocks should be enabled or disabled enable should the clocks of the constraint handler be enabled?
Definition at line 4658 of file cons.c.
References SCIP_Conshdlr::checktime, SCIP_Conshdlr::enfolptime, SCIP_Conshdlr::enfopstime, SCIP_Conshdlr::enforelaxtime, NULL, SCIP_Conshdlr::presoltime, SCIP_Conshdlr::proptime, SCIP_Conshdlr::resproptime, SCIP_Conshdlr::sbproptime, SCIP_Real, SCIPclockEnableOrDisable(), SCIPconshdlrGetSetupTime(), SCIP_Conshdlr::sepatime, and SCIP_Conshdlr::setuptime.
Referenced by SCIP_DECL_PARAMCHGD(), and SCIPconshdlrGetNUpdateConss().
◆ SCIPconshdlrDelVars()
SCIP_RETCODE SCIPconshdlrDelVars | ( | SCIP_CONSHDLR * | conshdlr, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat | ||
) |
calls variable deletion method of constraint handler
- Parameters
-
conshdlr constraint handler blkmem block memory set global SCIP settings stat dynamic problem statistics
Definition at line 4118 of file cons.c.
References conshdlrDelayUpdates(), conshdlrForceUpdates(), SCIP_Conshdlr::conss, SCIP_Conshdlr::name, SCIP_Conshdlr::nconss, NULL, SCIP_CALL, SCIP_OKAY, SCIPconshdlrLockVars(), and SCIPsetDebugMsg.
Referenced by SCIPconshdlrPresolve(), and SCIPprobPerformVarDeletions().
◆ SCIPconshdlrLockVars()
SCIP_RETCODE SCIPconshdlrLockVars | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_SET * | set | ||
) |
locks rounding of variables involved in the given constraint constraint handler that doesn't need constraints
- Parameters
-
conshdlr constraint handler set global SCIP settings
Definition at line 4149 of file cons.c.
References SCIP_Conshdlr::needscons, NULL, SCIP_CALL, SCIP_LOCKTYPE_MODEL, SCIP_OKAY, and SCIPconshdlrUnlockVars().
Referenced by SCIPconshdlrDelVars(), and SCIPprobTransform().
◆ SCIPconshdlrUnlockVars()
SCIP_RETCODE SCIPconshdlrUnlockVars | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_SET * | set | ||
) |
unlocks rounding of variables involved in the given constraint constraint handler that doesn't need constraints
- Parameters
-
conshdlr constraint handler set global SCIP settings
Definition at line 4164 of file cons.c.
References SCIP_Conshdlr::needscons, NULL, SCIP_CALL, SCIP_LOCKTYPE_MODEL, SCIP_OKAY, and SCIPconshdlrGetName().
Referenced by SCIPconshdlrLockVars(), and SCIPprobFree().
◆ SCIPconshdlrSetCopy()
void SCIPconshdlrSetCopy | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_DECL_CONSHDLRCOPY((*conshdlrcopy)) | , | ||
SCIP_DECL_CONSCOPY((*conscopy)) | |||
) |
callback setter methods of constraint handlerssets copy method of both the constraint handler and each associated constraint
sets copy method of both the constraint handler and each associated constraint
- Parameters
-
conshdlr constraint handler
Definition at line 4271 of file cons.c.
References SCIP_Conshdlr::needscons, NULL, and SCIPconshdlrSetFree().
Referenced by SCIPconshdlrSetEnforelax(), and SCIPsetConshdlrCopy().
◆ SCIPconshdlrSetFree()
void SCIPconshdlrSetFree | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_DECL_CONSFREE((*consfree)) | |||
) |
sets destructor method of constraint handler
- Parameters
-
conshdlr constraint handler
Definition at line 4286 of file cons.c.
References NULL, and SCIPconshdlrSetInit().
Referenced by SCIPconshdlrSetCopy(), and SCIPsetConshdlrFree().
◆ SCIPconshdlrSetInit()
void SCIPconshdlrSetInit | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_DECL_CONSINIT((*consinit)) | |||
) |
sets initialization method of constraint handler
- Parameters
-
conshdlr constraint handler
Definition at line 4297 of file cons.c.
References NULL, and SCIPconshdlrSetExit().
Referenced by SCIPconshdlrSetFree(), and SCIPsetConshdlrInit().
◆ SCIPconshdlrSetExit()
void SCIPconshdlrSetExit | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_DECL_CONSEXIT((*consexit)) | |||
) |
sets deinitialization method of constraint handler
- Parameters
-
conshdlr constraint handler
Definition at line 4308 of file cons.c.
References NULL, and SCIPconshdlrSetInitsol().
Referenced by SCIPconshdlrSetInit(), and SCIPsetConshdlrExit().
◆ SCIPconshdlrSetInitsol()
void SCIPconshdlrSetInitsol | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_DECL_CONSINITSOL((*consinitsol)) | |||
) |
sets solving process initialization method of constraint handler
- Parameters
-
conshdlr constraint handler
Definition at line 4319 of file cons.c.
References NULL, and SCIPconshdlrSetExitsol().
Referenced by SCIPconshdlrSetExit(), and SCIPsetConshdlrInitsol().
◆ SCIPconshdlrSetExitsol()
void SCIPconshdlrSetExitsol | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_DECL_CONSEXITSOL((*consexitsol)) | |||
) |
sets solving process deinitialization method of constraint handler
- Parameters
-
conshdlr constraint handler
Definition at line 4330 of file cons.c.
References NULL, and SCIPconshdlrSetInitpre().
Referenced by SCIPconshdlrSetInitsol(), and SCIPsetConshdlrExitsol().
◆ SCIPconshdlrSetInitpre()
void SCIPconshdlrSetInitpre | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_DECL_CONSINITPRE((*consinitpre)) | |||
) |
sets preprocessing initialization method of constraint handler
- Parameters
-
conshdlr constraint handler
Definition at line 4341 of file cons.c.
References NULL, and SCIPconshdlrSetExitpre().
Referenced by SCIPconshdlrSetExitsol(), and SCIPsetConshdlrInitpre().
◆ SCIPconshdlrSetExitpre()
void SCIPconshdlrSetExitpre | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_DECL_CONSEXITPRE((*consexitpre)) | |||
) |
sets preprocessing deinitialization method of constraint handler
- Parameters
-
conshdlr constraint handler
Definition at line 4352 of file cons.c.
References NULL, and SCIPconshdlrSetPresol().
Referenced by SCIPconshdlrSetInitpre(), and SCIPsetConshdlrExitpre().
◆ SCIPconshdlrSetPresol()
SCIP_RETCODE SCIPconshdlrSetPresol | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_DECL_CONSPRESOL((*conspresol)) | , | ||
int | maxprerounds, | ||
SCIP_PRESOLTIMING | presoltiming | ||
) |
sets presolving method of constraint handler
- Parameters
-
conshdlr constraint handler maxprerounds maximal number of presolving rounds the constraint handler participates in (-1: no limit) presoltiming timing mask of the constraint handler's presolving method
Definition at line 4363 of file cons.c.
References SCIP_Conshdlr::maxprerounds, SCIP_Conshdlr::name, NULL, SCIP_Conshdlr::presoltiming, SCIP_OKAY, SCIP_PARAMETERWRONGVAL, SCIP_PRESOLTIMING_MAX, SCIPconshdlrSetDelete(), and SCIPmessagePrintError().
Referenced by SCIPconshdlrSetExitpre(), and SCIPsetConshdlrPresol().
◆ SCIPconshdlrSetDelete()
void SCIPconshdlrSetDelete | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_DECL_CONSDELETE((*consdelete)) | |||
) |
sets method of constraint handler to free specific constraint data
- Parameters
-
conshdlr constraint handler
Definition at line 4392 of file cons.c.
References NULL, and SCIPconshdlrSetTrans().
Referenced by SCIPconshdlrSetPresol(), and SCIPsetConshdlrDelete().
◆ SCIPconshdlrSetTrans()
void SCIPconshdlrSetTrans | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_DECL_CONSTRANS((*constrans)) | |||
) |
sets method of constraint handler to transform constraint data into data belonging to the transformed problem
- Parameters
-
conshdlr constraint handler
Definition at line 4403 of file cons.c.
References NULL, and SCIPconshdlrSetInitlp().
Referenced by SCIPconshdlrSetDelete(), and SCIPsetConshdlrTrans().
◆ SCIPconshdlrSetInitlp()
void SCIPconshdlrSetInitlp | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_DECL_CONSINITLP((*consinitlp)) | |||
) |
sets method of constraint handler to initialize LP with relaxations of "initial" constraints
- Parameters
-
conshdlr constraint handler
Definition at line 4414 of file cons.c.
References NULL, and SCIPconshdlrSetResprop().
Referenced by SCIPconshdlrSetTrans(), and SCIPsetConshdlrInitlp().
◆ SCIPconshdlrSetResprop()
void SCIPconshdlrSetResprop | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_DECL_CONSRESPROP((*consresprop)) | |||
) |
sets propagation conflict resolving method of constraint handler
- Parameters
-
conshdlr constraint handler
Definition at line 4425 of file cons.c.
References NULL, and SCIPconshdlrSetActive().
Referenced by SCIPconshdlrSetInitlp(), and SCIPsetConshdlrResprop().
◆ SCIPconshdlrSetActive()
void SCIPconshdlrSetActive | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_DECL_CONSACTIVE((*consactive)) | |||
) |
sets activation notification method of constraint handler
- Parameters
-
conshdlr constraint handler
Definition at line 4436 of file cons.c.
References NULL, and SCIPconshdlrSetDeactive().
Referenced by SCIPconshdlrSetResprop(), and SCIPsetConshdlrActive().
◆ SCIPconshdlrSetDeactive()
void SCIPconshdlrSetDeactive | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_DECL_CONSDEACTIVE((*consdeactive)) | |||
) |
sets deactivation notification method of constraint handler
- Parameters
-
conshdlr constraint handler
Definition at line 4447 of file cons.c.
References NULL, and SCIPconshdlrSetEnable().
Referenced by SCIPconshdlrSetActive(), and SCIPsetConshdlrDeactive().
◆ SCIPconshdlrSetEnable()
void SCIPconshdlrSetEnable | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_DECL_CONSENABLE((*consenable)) | |||
) |
sets enabling notification method of constraint handler
- Parameters
-
conshdlr constraint handler
Definition at line 4458 of file cons.c.
References NULL, and SCIPconshdlrSetDisable().
Referenced by SCIPconshdlrSetDeactive(), and SCIPsetConshdlrEnable().
◆ SCIPconshdlrSetDisable()
void SCIPconshdlrSetDisable | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_DECL_CONSDISABLE((*consdisable)) | |||
) |
sets disabling notification method of constraint handler
- Parameters
-
conshdlr constraint handler
Definition at line 4469 of file cons.c.
References NULL, and SCIPconshdlrSetDelvars().
Referenced by SCIPconshdlrSetEnable(), and SCIPsetConshdlrDisable().
◆ SCIPconshdlrSetDelvars()
void SCIPconshdlrSetDelvars | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_DECL_CONSDELVARS((*consdelvars)) | |||
) |
sets variable deletion method of constraint handler
- Parameters
-
conshdlr constraint handler
Definition at line 4480 of file cons.c.
References NULL, and SCIPconshdlrSetPrint().
Referenced by SCIPconshdlrSetDisable(), and SCIPsetConshdlrDelvars().
◆ SCIPconshdlrSetPrint()
void SCIPconshdlrSetPrint | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_DECL_CONSPRINT((*consprint)) | |||
) |
sets constraint display method of constraint handler
- Parameters
-
conshdlr constraint handler
Definition at line 4491 of file cons.c.
References NULL, and SCIPconshdlrSetParse().
Referenced by SCIPconshdlrSetDelvars(), and SCIPsetConshdlrPrint().
◆ SCIPconshdlrSetParse()
void SCIPconshdlrSetParse | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_DECL_CONSPARSE((*consparse)) | |||
) |
sets constraint parsing method of constraint handler
- Parameters
-
conshdlr constraint handler
Definition at line 4502 of file cons.c.
References NULL, and SCIPconshdlrSetGetVars().
Referenced by SCIPconshdlrSetPrint(), and SCIPsetConshdlrParse().
◆ SCIPconshdlrSetGetVars()
void SCIPconshdlrSetGetVars | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_DECL_CONSGETVARS((*consgetvars)) | |||
) |
sets constraint variable getter method of constraint handler
- Parameters
-
conshdlr constraint handler
Definition at line 4513 of file cons.c.
References NULL, and SCIPconshdlrSetGetNVars().
Referenced by SCIPconshdlrSetParse(), and SCIPsetConshdlrGetVars().
◆ SCIPconshdlrSetGetNVars()
void SCIPconshdlrSetGetNVars | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_DECL_CONSGETNVARS((*consgetnvars)) | |||
) |
sets constraint variable number getter method of constraint handler
- Parameters
-
conshdlr constraint handler
Definition at line 4524 of file cons.c.
References NULL, and SCIPconshdlrSetGetDiveBdChgs().
Referenced by SCIPconshdlrSetGetVars(), and SCIPsetConshdlrGetNVars().
◆ SCIPconshdlrSetGetDiveBdChgs()
void SCIPconshdlrSetGetDiveBdChgs | ( | SCIP_CONSHDLR * | conshdlr, |
SCIP_DECL_CONSGETDIVEBDCHGS((*consgetdivebdchgs)) | |||
) |
sets diving enforcement method of constraint handler
- Parameters
-
conshdlr constraint handler
Definition at line 4535 of file cons.c.
References NULL, and SCIPconshdlrGetConss().
Referenced by SCIPconshdlrSetGetNVars(), and SCIPsetConshdlrGetDiveBdChgs().
◆ SCIPconssetchgFree()
SCIP_RETCODE SCIPconssetchgFree | ( | SCIP_CONSSETCHG ** | conssetchg, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set | ||
) |
frees constraint set change data and releases all included constraints
- Parameters
-
conssetchg pointer to constraint set change blkmem block memory set global SCIP settings
Definition at line 5308 of file cons.c.
References BMSfreeBlockMemory, BMSfreeBlockMemoryArrayNull, conssetchgEnsureAddedconssSize(), conssetchgRelease(), NULL, SCIP_CALL, and SCIP_OKAY.
Referenced by conssetchgRelease(), SCIPconssetchgMakeGlobal(), and SCIPnodeFree().
◆ SCIPconssetchgAddAddedCons()
SCIP_RETCODE SCIPconssetchgAddAddedCons | ( | SCIP_CONSSETCHG ** | conssetchg, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat, | ||
SCIP_CONS * | cons, | ||
int | depth, | ||
SCIP_Bool | focusnode, | ||
SCIP_Bool | active | ||
) |
adds constraint addition to constraint set changes, and captures constraint; activates constraint if the constraint set change data is currently active
- Parameters
-
conssetchg pointer to constraint set change data structure blkmem block memory set global SCIP settings stat dynamic problem statistics cons added constraint depth depth of constraint set change's node focusnode does the constraint set change belong to the focus node? active is the constraint set change currently active?
Definition at line 5382 of file cons.c.
References SCIP_Cons::addarraypos, SCIP_Cons::addconssetchg, conssetchgCreate(), conssetchgEnsureAddedconssSize(), SCIP_Cons::deleted, FALSE, SCIP_ConsSetChg::naddedconss, NULL, SCIP_CALL, SCIP_OKAY, SCIPconsActivate(), SCIPconsCapture(), SCIPconsIsActive(), and SCIPconssetchgAddDisabledCons().
Referenced by conssetchgEnsureDisabledconssSize(), and SCIPnodeAddCons().
◆ SCIPconssetchgAddDisabledCons()
SCIP_RETCODE SCIPconssetchgAddDisabledCons | ( | SCIP_CONSSETCHG ** | conssetchg, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_CONS * | cons | ||
) |
adds constraint disabling to constraint set changes, and captures constraint
- Parameters
-
conssetchg pointer to constraint set change data structure blkmem block memory set global SCIP settings cons disabled constraint
Definition at line 5428 of file cons.c.
References conssetchgCreate(), conssetchgDelAddedCons(), conssetchgEnsureDisabledconssSize(), SCIP_ConsSetChg::ndisabledconss, NULL, SCIP_CALL, SCIP_OKAY, and SCIPconsCapture().
Referenced by SCIPconssetchgAddAddedCons(), and SCIPnodeDelCons().
◆ SCIPconssetchgApply()
SCIP_RETCODE SCIPconssetchgApply | ( | SCIP_CONSSETCHG * | conssetchg, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat, | ||
int | depth, | ||
SCIP_Bool | focusnode | ||
) |
applies constraint set change
- Parameters
-
conssetchg constraint set change to apply blkmem block memory set global SCIP settings stat dynamic problem statistics depth depth of constraint set change's node focusnode does the constraint set change belong to the focus node?
Definition at line 5546 of file cons.c.
References SCIP_Cons::active, SCIP_Cons::addarraypos, SCIP_Cons::addconssetchg, SCIP_Cons::conshdlr, conssetchgDelAddedCons(), conssetchgDelDisabledCons(), SCIP_Cons::deleted, SCIP_Cons::enabled, SCIP_ConsSetChg::naddedconss, SCIP_Cons::name, SCIP_Conshdlr::name, NULL, SCIP_CALL, SCIP_OKAY, SCIPconsActivate(), SCIPconsDisable(), SCIPconssetchgUndo(), SCIPsetDebugMsg, and SCIP_Cons::update.
Referenced by nodeActivate(), and SCIPconssetchgGetAddedConsData().
◆ SCIPconssetchgUndo()
SCIP_RETCODE SCIPconssetchgUndo | ( | SCIP_CONSSETCHG * | conssetchg, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat | ||
) |
undoes constraint set change
- Parameters
-
conssetchg constraint set change to undo blkmem block memory set global SCIP settings stat dynamic problem statistics
Definition at line 5633 of file cons.c.
References SCIP_Cons::active, SCIP_Cons::addarraypos, SCIP_Cons::addconssetchg, SCIP_Cons::conshdlr, conssetchgDelDisabledCons(), SCIP_Cons::deleted, SCIP_Cons::enabled, SCIP_ConsSetChg::naddedconss, SCIP_Cons::name, SCIP_Conshdlr::name, NULL, SCIP_CALL, SCIP_OKAY, SCIPconsDeactivate(), SCIPconsEnable(), SCIPconssetchgMakeGlobal(), SCIPsetDebugMsg, and SCIP_Cons::update.
Referenced by nodeDeactivate(), and SCIPconssetchgApply().
◆ SCIPconssetchgMakeGlobal()
SCIP_RETCODE SCIPconssetchgMakeGlobal | ( | SCIP_CONSSETCHG ** | conssetchg, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat, | ||
SCIP_PROB * | prob, | ||
SCIP_REOPT * | reopt | ||
) |
applies constraint set change to the global problem and deletes the constraint set change data
- Parameters
-
conssetchg pointer to constraint set change data blkmem block memory set global SCIP settings stat dynamic problem statistics prob problem data reopt reoptimization data
Definition at line 5719 of file cons.c.
References conssetchgDelAddedCons(), conssetchgDelDisabledCons(), SCIP_Cons::deleted, SCIP_ConsSetChg::naddedconss, NULL, SCIP_CALL, SCIP_OKAY, SCIPconsCapture(), SCIPconsCreate(), SCIPconsDelete(), SCIPconsIsStickingAtNode(), SCIPconsRelease(), SCIPconssetchgFree(), SCIPprobAddCons(), SCIPsetDebugMsg, and SCIP_Cons::update.
Referenced by SCIPconssetchgUndo(), and SCIPnodeFocus().
◆ SCIPconshdlrIncNAppliedCuts()
void SCIPconshdlrIncNAppliedCuts | ( | SCIP_CONSHDLR * | conshdlr | ) |
increase count of applied cuts
- Parameters
-
conshdlr constraint handler
Definition at line 4878 of file cons.c.
References SCIP_Conshdlr::ncutsapplied, NULL, and SCIPconshdlrIncNCutsFound().
Referenced by SCIPconshdlrGetNCutsApplied(), and sepastoreApplyCut().
◆ SCIPconshdlrIncNCutsFound()
void SCIPconshdlrIncNCutsFound | ( | SCIP_CONSHDLR * | conshdlr | ) |
increase count of found cuts
- Parameters
-
conshdlr constraint handler
Definition at line 4888 of file cons.c.
References SCIP_Conshdlr::ncutsfound, NULL, SCIP_Longint, and SCIPconshdlrGetNConssFound().
Referenced by SCIPconshdlrIncNAppliedCuts(), and SCIPcutpoolSeparate().
◆ SCIPconsCreate()
SCIP_RETCODE SCIPconsCreate | ( | SCIP_CONS ** | cons, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
const char * | name, | ||
SCIP_CONSHDLR * | conshdlr, | ||
SCIP_CONSDATA * | consdata, | ||
SCIP_Bool | initial, | ||
SCIP_Bool | separate, | ||
SCIP_Bool | enforce, | ||
SCIP_Bool | check, | ||
SCIP_Bool | propagate, | ||
SCIP_Bool | local, | ||
SCIP_Bool | modifiable, | ||
SCIP_Bool | dynamic, | ||
SCIP_Bool | removable, | ||
SCIP_Bool | stickingatnode, | ||
SCIP_Bool | original, | ||
SCIP_Bool | deleteconsdata | ||
) |
creates and captures a constraint, and inserts it into the conss array of its constraint handler
- Warning
- If a constraint is marked to be checked for feasibility but not to be enforced, a LP or pseudo solution may be declared feasible even if it violates this particular constraint. This constellation should only be used, if no LP or pseudo solution can violate the constraint – e.g. if a local constraint is redundant due to the variable's local bounds.
- Parameters
-
cons pointer to constraint blkmem block memory set global SCIP settings name name of constraint conshdlr constraint handler for this constraint consdata data for this specific constraint initial should the LP relaxation of constraint be in the initial LP? Usually set to TRUE. Set to FALSE for 'lazy constraints'. separate should the constraint be separated during LP processing? Usually set to TRUE. enforce should the constraint be enforced during node processing? TRUE for model constraints, FALSE for additional, redundant constraints. check should the constraint be checked for feasibility? TRUE for model constraints, FALSE for additional, redundant constraints. propagate should the constraint be propagated during node processing? Usually set to TRUE. local is constraint only valid locally? Usually set to FALSE. Has to be set to TRUE, e.g., for branching constraints. modifiable is constraint modifiable (subject to column generation)? Usually set to FALSE. In column generation applications, set to TRUE if pricing adds coefficients to this constraint. dynamic is constraint subject to aging? Usually set to FALSE. Set to TRUE for own cuts which are separated as constraints. removable should the relaxation be removed from the LP due to aging or cleanup? Usually set to FALSE. Set to TRUE for 'lazy constraints' and 'user cuts'. stickingatnode should the constraint always be kept at the node where it was added, even if it may be moved to a more global node? Usually set to FALSE. Set to TRUE to for constraints that represent node data. original is constraint belonging to the original problem? deleteconsdata has the constraint data to be deleted if constraint is freed?
Definition at line 5815 of file cons.c.
References BMSallocBlockMemory, BMSduplicateBlockMemoryArray, checkConssArrays, conshdlrAddCons(), conshdlrAddUpdateCons(), conshdlrAreUpdatesDelayed(), FALSE, NLOCKTYPES, NULL, SCIP_ALLOC, SCIP_CALL, SCIP_OKAY, SCIPconsCapture(), SCIPconsCopy(), SCIPsetDebugMsg, and TRUE.
Referenced by SCIPconssetchgMakeGlobal(), SCIPconsTransform(), and SCIPcreateCons().
◆ SCIPconsCopy()
SCIP_RETCODE SCIPconsCopy | ( | SCIP_CONS ** | cons, |
SCIP_SET * | set, | ||
const char * | name, | ||
SCIP * | sourcescip, | ||
SCIP_CONSHDLR * | sourceconshdlr, | ||
SCIP_CONS * | sourcecons, | ||
SCIP_HASHMAP * | varmap, | ||
SCIP_HASHMAP * | consmap, | ||
SCIP_Bool | initial, | ||
SCIP_Bool | separate, | ||
SCIP_Bool | enforce, | ||
SCIP_Bool | check, | ||
SCIP_Bool | propagate, | ||
SCIP_Bool | local, | ||
SCIP_Bool | modifiable, | ||
SCIP_Bool | dynamic, | ||
SCIP_Bool | removable, | ||
SCIP_Bool | stickingatnode, | ||
SCIP_Bool | global, | ||
SCIP_Bool * | valid | ||
) |
copies source constraint of source SCIP into the target constraint for the target SCIP, using the variable map for mapping the variables of the source SCIP to the variables of the target SCIP; if the copying process was successful a constraint is created and captured;
- Warning
- If a constraint is marked to be checked for feasibility but not to be enforced, an LP or pseudo solution may be declared feasible even if it violates this particular constraint. This constellation should only be used, if no LP or pseudo solution can violate the constraint – e.g. if a local constraint is redundant due to the variable's local bounds.
- Parameters
-
cons pointer to store the created target constraint set global SCIP settings of the target SCIP name name of constraint, or NULL if the name of the source constraint should be used sourcescip source SCIP data structure sourceconshdlr source constraint handler for this constraint sourcecons source constraint of the source SCIP varmap a SCIP_HASHMAP mapping variables of the source SCIP to corresponding variables of the target SCIP consmap a hashmap to store the mapping of source constraints to the corresponding target constraints, must not be NULL! initial should the LP relaxation of constraint be in the initial LP? separate should the constraint be separated during LP processing? enforce should the constraint be enforced during node processing? check should the constraint be checked for feasibility? propagate should the constraint be propagated during node processing? local is constraint only valid locally? modifiable is constraint modifiable (subject to column generation)? dynamic is constraint subject to aging? removable should the relaxation be removed from the LP due to aging or cleanup? stickingatnode should the constraint always be kept at the node where it was added, even if it may be moved to a more global node? global create a global or a local copy? valid pointer to store whether the copying was valid or not
Definition at line 5957 of file cons.c.
References FALSE, NULL, SCIP_CALL, SCIP_OKAY, and SCIPconsParse().
Referenced by SCIPconsCreate(), and SCIPgetConsCopy().
◆ SCIPconsParse()
SCIP_RETCODE SCIPconsParse | ( | SCIP_CONS ** | cons, |
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr, | ||
const char * | str, | ||
SCIP_Bool | initial, | ||
SCIP_Bool | separate, | ||
SCIP_Bool | enforce, | ||
SCIP_Bool | check, | ||
SCIP_Bool | propagate, | ||
SCIP_Bool | local, | ||
SCIP_Bool | modifiable, | ||
SCIP_Bool | dynamic, | ||
SCIP_Bool | removable, | ||
SCIP_Bool | stickingatnode, | ||
SCIP_Bool * | success | ||
) |
parses constraint information (in cip format) out of a string; if the parsing process was successful a constraint is created, captured, and inserted into the conss array of its constraint handler.
- Warning
- If a constraint is marked to be checked for feasibility but not to be enforced, an LP or pseudo solution may be declared feasible even if it violates this particular constraint. This constellation should only be used, if no LP or pseudo solution can violate the constraint – e.g. if a local constraint is redundant due to the variable's local bounds.
- Parameters
-
cons pointer to constraint set global SCIP settings messagehdlr message handler of target SCIP str string to parse for constraint initial should the LP relaxation of constraint be in the initial LP? Usually set to TRUE. Set to FALSE for 'lazy constraints'. separate should the constraint be separated during LP processing? Usually set to TRUE. enforce should the constraint be enforced during node processing? TRUE for model constraints, FALSE for additional, redundant constraints. check should the constraint be checked for feasibility? TRUE for model constraints, FALSE for additional, redundant constraints. propagate should the constraint be propagated during node processing? Usually set to TRUE. local is constraint only valid locally? Usually set to FALSE. Has to be set to TRUE, e.g., for branching constraints. modifiable is constraint modifiable (subject to column generation)? Usually set to FALSE. In column generation applications, set to TRUE if pricing adds coefficients to this constraint. dynamic is constraint subject to aging? Usually set to FALSE. Set to TRUE for own cuts which are separated as constraints. removable should the relaxation be removed from the LP due to aging or cleanup? Usually set to FALSE. Set to TRUE for 'lazy constraints' and 'user cuts'. stickingatnode should the constraint always be kept at the node where it was added, even if it may be moved to a more global node? Usually set to FALSE. Set to TRUE to for constraints that represent node data. success pointer store if the paring process was successful
Definition at line 6013 of file cons.c.
References FALSE, NULL, SCIP_CALL, SCIP_MAXSTRLEN, SCIP_OKAY, SCIPconsChgName(), SCIPmessagePrintWarning(), SCIPsetDebugMsg, SCIPsetFindConshdlr(), and SCIPstrCopySection().
Referenced by SCIPconsCopy(), and SCIPparseCons().
◆ SCIPconsChgName()
SCIP_RETCODE SCIPconsChgName | ( | SCIP_CONS * | cons, |
BMS_BLKMEM * | blkmem, | ||
const char * | name | ||
) |
change name of given constraint
- Parameters
-
cons problem constraint blkmem block memory buffer name new name of constraint
Definition at line 6120 of file cons.c.
References BMSduplicateBlockMemoryArray, BMSfreeBlockMemoryArray, SCIP_Cons::name, NULL, SCIP_ALLOC, SCIP_OKAY, and SCIPconsFree().
Referenced by SCIPchgConsName(), and SCIPconsParse().
◆ SCIPconsFree()
SCIP_RETCODE SCIPconsFree | ( | SCIP_CONS ** | cons, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set | ||
) |
frees a constraint and removes it from the conss array of its constraint handler
- Parameters
-
cons constraint to free blkmem block memory buffer set global SCIP settings
Definition at line 6140 of file cons.c.
References BMSfreeBlockMemory, BMSfreeBlockMemoryArray, checkConssArrays, SCIP_Cons::consdata, conshdlrDelCons(), NULL, SCIP_CALL, SCIP_OKAY, SCIPconsCapture(), and SCIPsetDebugMsg.
Referenced by SCIPconsChgName(), and SCIPconsRelease().
◆ SCIPconsCapture()
void SCIPconsCapture | ( | SCIP_CONS * | cons | ) |
increases usage counter of constraint
- Parameters
-
cons constraint
Definition at line 6195 of file cons.c.
References SCIP_Cons::name, NULL, SCIP_Cons::nuses, SCIPconsRelease(), and SCIPdebugMessage.
Referenced by boundchgCaptureData(), conflictstoreAddOrigConflict(), conshdlrAddUpdateCons(), SCIPcaptureCons(), SCIPconflictstoreAddConflict(), SCIPconflictstoreAddDualraycons(), SCIPconflictstoreAddDualsolcons(), SCIPconsCreate(), SCIPconsFree(), SCIPconshdlrsStorePropagationStatus(), SCIPconssetchgAddAddedCons(), SCIPconssetchgAddDisabledCons(), SCIPconssetchgMakeGlobal(), SCIPconsTransform(), SCIPprobAddCons(), SCIPreoptAddCons(), SCIPreoptSaveActiveConss(), SCIProwCreate(), SCIPtransformCons(), and SCIPtransformConss().
◆ SCIPconsRelease()
SCIP_RETCODE SCIPconsRelease | ( | SCIP_CONS ** | cons, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set | ||
) |
decreases usage counter of constraint, and frees memory if necessary
- Parameters
-
cons pointer to constraint blkmem block memory set global SCIP settings
Definition at line 6207 of file cons.c.
References conshdlrAddUpdateCons(), conshdlrAreUpdatesDelayed(), NULL, SCIP_CALL, SCIP_OKAY, SCIPconsFree(), SCIPconsPrint(), SCIPsetDebugMsg, and TRUE.
Referenced by boundchgReleaseData(), cleanActiveConss(), conshdlrProcessUpdates(), conssetchgDelAddedCons(), conssetchgDelDisabledCons(), conssetchgRelease(), delPosConflict(), delPosDualray(), delPosDualsol(), SCIPconflictstoreClear(), SCIPconflictstoreTransform(), SCIPconsCapture(), SCIPconshdlrsResetPropagationStatus(), SCIPconssetchgMakeGlobal(), SCIPprobDelCons(), SCIPprobTransform(), SCIPreleaseCons(), SCIPreoptReleaseData(), SCIPreoptReset(), SCIProwFree(), and tightenSingleVar().
◆ SCIPconsPrint()
SCIP_RETCODE SCIPconsPrint | ( | SCIP_CONS * | cons, |
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr, | ||
FILE * | file | ||
) |
outputs constraint information to file stream
- Parameters
-
cons constraint to print set global SCIP settings messagehdlr message handler file output file (or NULL for standard output)
Definition at line 6247 of file cons.c.
References SCIP_Cons::conshdlr, SCIP_Cons::name, SCIP_Conshdlr::name, NULL, SCIP_Cons::scip, SCIP_CALL, SCIP_OKAY, SCIPconsGetVars(), and SCIPmessageFPrintInfo().
Referenced by SCIPconsRelease(), and SCIPprintCons().
◆ SCIPconsCheck()
SCIP_RETCODE SCIPconsCheck | ( | SCIP_CONS * | cons, |
SCIP_SET * | set, | ||
SCIP_SOL * | sol, | ||
SCIP_Bool | checkintegrality, | ||
SCIP_Bool | checklprows, | ||
SCIP_Bool | printreason, | ||
SCIP_RESULT * | result | ||
) |
checks single constraint for feasibility of the given solution
- Parameters
-
cons constraint to check set global SCIP settings sol primal CIP solution checkintegrality Has integrality to be checked? checklprows Do constraints represented by rows in the current LP have to be checked? printreason Should the reason for the violation be printed? result pointer to store the result of the callback method
Definition at line 7299 of file cons.c.
References SCIP_Cons::conshdlr, FALSE, SCIP_Cons::name, SCIP_Conshdlr::name, NULL, SCIP_Cons::scip, SCIP_CALL, SCIP_FEASIBLE, SCIP_INFEASIBLE, SCIP_INVALIDRESULT, SCIP_OKAY, SCIPconsEnfops(), SCIPerrorMessage, and SCIPsetDebugMsg.
Referenced by checkSolOrig(), SCIPcheckCons(), and SCIPconsAddLocks().
◆ SCIPconsEnfops()
SCIP_RETCODE SCIPconsEnfops | ( | SCIP_CONS * | cons, |
SCIP_SET * | set, | ||
SCIP_Bool | solinfeasible, | ||
SCIP_Bool | objinfeasible, | ||
SCIP_RESULT * | result | ||
) |
enforces single constraint for a given pseudo solution
- Parameters
-
cons constraint to enforce set global SCIP settings solinfeasible was the solution already declared infeasible by a constraint handler? objinfeasible is the solution infeasible anyway due to violating lower objective bound? result pointer to store the result of the callback method
Definition at line 7337 of file cons.c.
References SCIP_Cons::conshdlr, SCIP_Conshdlr::name, NULL, SCIP_Cons::scip, SCIP_BRANCHED, SCIP_CALL, SCIP_CONSADDED, SCIP_CUTOFF, SCIP_DIDNOTRUN, SCIP_FEASIBLE, SCIP_INFEASIBLE, SCIP_INVALIDRESULT, SCIP_OKAY, SCIP_REDUCEDDOM, SCIP_SOLVELP, SCIPconsEnfolp(), SCIPerrorMessage, and SCIPsetDebugMsg.
Referenced by SCIPconsCheck(), and SCIPenfopsCons().
◆ SCIPconsEnfolp()
SCIP_RETCODE SCIPconsEnfolp | ( | SCIP_CONS * | cons, |
SCIP_SET * | set, | ||
SCIP_Bool | solinfeasible, | ||
SCIP_RESULT * | result | ||
) |
enforces single constraint for a given LP solution
- Parameters
-
cons constraint to enforce set global SCIP settings solinfeasible was the solution already declared infeasible by a constraint handler? result pointer to store the result of the callback method
Definition at line 7381 of file cons.c.
References SCIP_Cons::conshdlr, SCIP_Conshdlr::name, NULL, SCIP_Cons::scip, SCIP_BRANCHED, SCIP_CALL, SCIP_CONSADDED, SCIP_CUTOFF, SCIP_FEASIBLE, SCIP_INFEASIBLE, SCIP_INVALIDRESULT, SCIP_OKAY, SCIP_REDUCEDDOM, SCIP_SEPARATED, SCIPconsEnforelax(), SCIPerrorMessage, and SCIPsetDebugMsg.
Referenced by SCIPconsEnfops(), and SCIPenfolpCons().
◆ SCIPconsEnforelax()
SCIP_RETCODE SCIPconsEnforelax | ( | SCIP_CONS * | cons, |
SCIP_SET * | set, | ||
SCIP_SOL * | sol, | ||
SCIP_Bool | solinfeasible, | ||
SCIP_RESULT * | result | ||
) |
enforces single constraint for a given relaxation solution
- Parameters
-
cons constraint to enforce set global SCIP settings sol solution to be enforced solinfeasible was the solution already declared infeasible by a constraint handler? result pointer to store the result of the callback method
Definition at line 7423 of file cons.c.
References SCIP_Cons::conshdlr, SCIP_Conshdlr::name, NULL, SCIP_Cons::scip, SCIP_BRANCHED, SCIP_CALL, SCIP_CONSADDED, SCIP_CUTOFF, SCIP_FEASIBLE, SCIP_INFEASIBLE, SCIP_INVALIDRESULT, SCIP_OKAY, SCIP_REDUCEDDOM, SCIP_SEPARATED, SCIPconsInitlp(), SCIPdebugMessage, and SCIPerrorMessage.
Referenced by SCIPconsEnfolp(), and SCIPenforelaxCons().
◆ SCIPconsInitlp()
SCIP_RETCODE SCIPconsInitlp | ( | SCIP_CONS * | cons, |
SCIP_SET * | set, | ||
SCIP_Bool * | infeasible | ||
) |
calls LP initialization method for single constraint
- Parameters
-
cons constraint to initialize set global SCIP settings infeasible pointer to store whether infeasibility was detected while building the LP
Definition at line 7467 of file cons.c.
References SCIP_Cons::conshdlr, NULL, SCIP_Cons::scip, SCIP_CALL, SCIP_OKAY, and SCIPconsSepalp().
Referenced by SCIPconsEnforelax(), and SCIPinitlpCons().
◆ SCIPconsSepalp()
SCIP_RETCODE SCIPconsSepalp | ( | SCIP_CONS * | cons, |
SCIP_SET * | set, | ||
SCIP_RESULT * | result | ||
) |
calls separation method of single constraint for LP solution
- Parameters
-
cons constraint to separate set global SCIP settings result pointer to store the result of the separation call
Definition at line 7493 of file cons.c.
References SCIP_Cons::conshdlr, SCIP_Conshdlr::name, NULL, SCIP_Cons::scip, SCIP_CALL, SCIP_CONSADDED, SCIP_CUTOFF, SCIP_DELAYED, SCIP_DIDNOTFIND, SCIP_DIDNOTRUN, SCIP_INVALIDRESULT, SCIP_NEWROUND, SCIP_OKAY, SCIP_REDUCEDDOM, SCIP_SEPARATED, SCIPconsSepasol(), SCIPerrorMessage, and SCIPsetDebugMsg.
Referenced by SCIPconsInitlp(), and SCIPsepalpCons().
◆ SCIPconsSepasol()
SCIP_RETCODE SCIPconsSepasol | ( | SCIP_CONS * | cons, |
SCIP_SET * | set, | ||
SCIP_SOL * | sol, | ||
SCIP_RESULT * | result | ||
) |
calls separation method of single constraint for given primal solution
- Parameters
-
cons constraint to separate set global SCIP settings sol primal solution that should be separated result pointer to store the result of the separation call
Definition at line 7534 of file cons.c.
References SCIP_Cons::conshdlr, SCIP_Conshdlr::name, NULL, SCIP_Cons::scip, SCIP_CALL, SCIP_CONSADDED, SCIP_CUTOFF, SCIP_DELAYED, SCIP_DIDNOTFIND, SCIP_DIDNOTRUN, SCIP_INVALIDRESULT, SCIP_NEWROUND, SCIP_OKAY, SCIP_REDUCEDDOM, SCIP_SEPARATED, SCIPconsProp(), SCIPerrorMessage, and SCIPsetDebugMsg.
Referenced by SCIPconsSepalp(), and SCIPsepasolCons().
◆ SCIPconsProp()
SCIP_RETCODE SCIPconsProp | ( | SCIP_CONS * | cons, |
SCIP_SET * | set, | ||
SCIP_PROPTIMING | proptiming, | ||
SCIP_RESULT * | result | ||
) |
calls domain propagation method of single constraint
- Parameters
-
cons constraint to propagate set global SCIP settings proptiming current point in the node solving loop result pointer to store the result of the callback method
Definition at line 7577 of file cons.c.
References SCIP_Cons::conshdlr, SCIP_Conshdlr::name, NULL, SCIP_Cons::scip, SCIP_CALL, SCIP_CONSADDED, SCIP_CUTOFF, SCIP_DELAYED, SCIP_DIDNOTFIND, SCIP_DIDNOTRUN, SCIP_INVALIDRESULT, SCIP_OKAY, SCIP_REDUCEDDOM, SCIPconsResprop(), SCIPerrorMessage, and SCIPsetDebugMsg.
Referenced by SCIPconsSepasol(), and SCIPpropCons().
◆ SCIPconsResprop()
SCIP_RETCODE SCIPconsResprop | ( | SCIP_CONS * | cons, |
SCIP_SET * | set, | ||
SCIP_VAR * | infervar, | ||
int | inferinfo, | ||
SCIP_BOUNDTYPE | boundtype, | ||
SCIP_BDCHGIDX * | bdchgidx, | ||
SCIP_Real | relaxedbd, | ||
SCIP_RESULT * | result | ||
) |
resolves propagation conflict of single constraint
- Parameters
-
cons constraint to resolve conflict for set global SCIP settings infervar the conflict variable whose bound change has to be resolved inferinfo the user information passed to the corresponding SCIPinferVarLbCons() or SCIPinferVarUbCons() call boundtype the type of the changed bound (lower or upper bound) bdchgidx the index of the bound change, representing the point of time where the change took place relaxedbd the relaxed bound which is sufficient to be explained result pointer to store the result of the callback method
Definition at line 7617 of file cons.c.
References SCIP_Cons::conshdlr, SCIP_Conshdlr::name, NULL, SCIP_Cons::scip, SCIP_CALL, SCIP_DIDNOTFIND, SCIP_INVALIDRESULT, SCIP_OKAY, SCIP_SUCCESS, SCIPconsPresol(), SCIPerrorMessage, and SCIPsetDebugMsg.
Referenced by SCIPconsProp(), and SCIPrespropCons().
◆ SCIPconsPresol()
SCIP_RETCODE SCIPconsPresol | ( | SCIP_CONS * | cons, |
SCIP_SET * | set, | ||
int | nrounds, | ||
SCIP_PRESOLTIMING | timing, | ||
int | nnewfixedvars, | ||
int | nnewaggrvars, | ||
int | nnewchgvartypes, | ||
int | nnewchgbds, | ||
int | nnewholes, | ||
int | nnewdelconss, | ||
int | nnewaddconss, | ||
int | nnewupgdconss, | ||
int | nnewchgcoefs, | ||
int | nnewchgsides, | ||
int * | nfixedvars, | ||
int * | naggrvars, | ||
int * | nchgvartypes, | ||
int * | nchgbds, | ||
int * | naddholes, | ||
int * | ndelconss, | ||
int * | naddconss, | ||
int * | nupgdconss, | ||
int * | nchgcoefs, | ||
int * | nchgsides, | ||
SCIP_RESULT * | result | ||
) |
presolves single constraint
- Parameters
-
cons constraint to presolve set global SCIP settings nrounds number of presolving rounds already done timing current presolving timing nnewfixedvars number of variables fixed since the last call to the presolving method nnewaggrvars number of variables aggregated since the last call to the presolving method nnewchgvartypes number of variable type changes since the last call to the presolving method nnewchgbds number of variable bounds tightened since the last call to the presolving method nnewholes number of domain holes added since the last call to the presolving method nnewdelconss number of deleted constraints since the last call to the presolving method nnewaddconss number of added constraints since the last call to the presolving method nnewupgdconss number of upgraded constraints since the last call to the presolving method nnewchgcoefs number of changed coefficients since the last call to the presolving method nnewchgsides number of changed left or right hand sides since the last call to the presolving method nfixedvars pointer to count total number of variables fixed of all presolvers naggrvars pointer to count total number of variables aggregated of all presolvers nchgvartypes pointer to count total number of variable type changes of all presolvers nchgbds pointer to count total number of variable bounds tightened of all presolvers naddholes pointer to count total number of domain holes added of all presolvers ndelconss pointer to count total number of deleted constraints of all presolvers naddconss pointer to count total number of added constraints of all presolvers nupgdconss pointer to count total number of upgraded constraints of all presolvers nchgcoefs pointer to count total number of changed coefficients of all presolvers nchgsides pointer to count total number of changed left/right hand sides of all presolvers result pointer to store the result of the callback method
Definition at line 7659 of file cons.c.
References SCIP_Cons::conshdlr, SCIP_Conshdlr::name, NULL, SCIP_Cons::scip, SCIP_CALL, SCIP_CUTOFF, SCIP_DELAYED, SCIP_DIDNOTFIND, SCIP_DIDNOTRUN, SCIP_INVALIDRESULT, SCIP_OKAY, SCIP_SUCCESS, SCIP_UNBOUNDED, SCIPconsActive(), SCIPerrorMessage, and SCIPsetDebugMsg.
Referenced by SCIPconsResprop(), and SCIPpresolCons().
◆ SCIPconsActive()
SCIP_RETCODE SCIPconsActive | ( | SCIP_CONS * | cons, |
SCIP_SET * | set | ||
) |
calls constraint activation notification method of single constraint
- Parameters
-
cons constraint to notify set global SCIP settings
Definition at line 7733 of file cons.c.
References SCIP_Cons::conshdlr, NULL, SCIP_Cons::scip, SCIP_CALL, SCIP_OKAY, and SCIPconsDeactive().
Referenced by SCIPactiveCons(), and SCIPconsPresol().
◆ SCIPconsDeactive()
SCIP_RETCODE SCIPconsDeactive | ( | SCIP_CONS * | cons, |
SCIP_SET * | set | ||
) |
calls constraint deactivation notification method of single constraint
- Parameters
-
cons constraint to notify set global SCIP settings
Definition at line 7757 of file cons.c.
References SCIP_Cons::conshdlr, NULL, SCIP_Cons::scip, SCIP_CALL, SCIP_DECL_HASHGETKEY(), and SCIP_OKAY.
Referenced by SCIPconsActive(), and SCIPdeactiveCons().
◆ SCIPconsGetVars()
SCIP_RETCODE SCIPconsGetVars | ( | SCIP_CONS * | cons, |
SCIP_SET * | set, | ||
SCIP_VAR ** | vars, | ||
int | varssize, | ||
SCIP_Bool * | success | ||
) |
method to collect the variables of a constraint
If the number of variables is greater than the available slots in the variable array, nothing happens except that the success point is set to FALSE. With the method SCIPgetConsNVars() it is possible to get the number of variables a constraint has in its scope.
- Note
- The success pointer indicates if all variables were copied into the vars arrray.
- It might be that a constraint handler does not support this functionality, in that case the success pointer is set to FALSE.
method to collect the variables of a constraint
If the number of variables is greater than the available slots in the variable array, nothing happens except that the success point is set to FALSE. With the method SCIPconsGetNVars() it is possible to get the number of variables a constraint has in its scope.
- Note
- The success pointer indicates if all variables were copied into the vars arrray.
- It might be that a constraint handler does not support this functionality, in that case the success pointer is set to FALSE.
- Parameters
-
cons constraint to print set global SCIP settings vars array to store the involved variable of the constraint varssize available slots in vars array which is needed to check if the array is large enough success pointer to store whether the variables are successfully copied
Definition at line 6286 of file cons.c.
References SCIP_Cons::conshdlr, FALSE, NULL, SCIP_Cons::scip, SCIP_CALL, SCIP_OKAY, and SCIPconsGetNVars().
Referenced by SCIPconsPrint(), and SCIPgetConsVars().
◆ SCIPconsGetNVars()
SCIP_RETCODE SCIPconsGetNVars | ( | SCIP_CONS * | cons, |
SCIP_SET * | set, | ||
int * | nvars, | ||
SCIP_Bool * | success | ||
) |
method to collect the number of variables of a constraint
- Note
- The success pointer indicates if the contraint handler was able to return the number of variables
- It might be that a constraint handler does not support this functionality, in that case the success pointer is set to FALSE
- Parameters
-
cons constraint to print set global SCIP settings nvars pointer to store the number of variables success pointer to store whether the constraint successfully returned the number of variables
Definition at line 6322 of file cons.c.
References SCIP_Cons::conshdlr, FALSE, NULL, SCIP_Cons::scip, SCIP_CALL, SCIP_OKAY, and SCIPconsDelete().
Referenced by calcNonZeros(), delPosDualray(), delPosDualsol(), saveConsBounddisjuction(), saveConsLinear(), SCIPconflictstoreAddDualraycons(), SCIPconflictstoreAddDualsolcons(), SCIPconsGetVars(), SCIPgetConsNVars(), and SCIPgetDualSolVal().
◆ SCIPconsDelete()
SCIP_RETCODE SCIPconsDelete | ( | SCIP_CONS * | cons, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat, | ||
SCIP_PROB * | prob, | ||
SCIP_REOPT * | reopt | ||
) |
globally removes constraint from all subproblems; removes constraint from the constraint set change data of the node, where it was created, or from the problem, if it was a problem constraint
- Parameters
-
cons constraint to delete blkmem block memory set global SCIP settings stat dynamic problem statistics prob problem data reopt reoptimization data
Definition at line 6354 of file cons.c.
References SCIP_Cons::active, SCIP_Cons::addarraypos, SCIP_Cons::addconssetchg, SCIP_ConsSetChg::addedconss, SCIP_Cons::conshdlr, conssetchgDelAddedCons(), SCIP_Conshdlr::delayupdatecount, SCIP_Cons::deleted, SCIP_Cons::enabled, FALSE, SCIP_ConsSetChg::naddedconss, SCIP_Cons::name, NULL, SCIP_Cons::scip, SCIP_CALL, SCIP_OKAY, SCIPconsDeactivate(), SCIPconsTransform(), SCIPprobDelCons(), SCIPreoptConsCanBeDeleted(), SCIPsetDebugMsg, TRUE, SCIP_Cons::updateactivate, and SCIP_Cons::updatedeactivate.
Referenced by delPosConflict(), delPosDualray(), delPosDualsol(), SCIPconflictstoreAddDualraycons(), SCIPconflictstoreAddDualsolcons(), SCIPconsAddAge(), SCIPconsGetNVars(), SCIPconssetchgMakeGlobal(), SCIPdelCons(), SCIPdelConsLocal(), and SCIPdelConsNode().
◆ SCIPconsTransform()
SCIP_RETCODE SCIPconsTransform | ( | SCIP_CONS * | origcons, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_CONS ** | transcons | ||
) |
gets and captures transformed constraint of a given constraint; if the constraint is not yet transformed, a new transformed constraint for this constraint is created
gets and captures transformed constraint of a given original constraint; if the constraint is not yet transformed, a new transformed constraint for this constraint is created
- Parameters
-
origcons original constraint blkmem block memory buffer set global SCIP settings transcons pointer to store the transformed constraint
Definition at line 6414 of file cons.c.
References SCIP_Cons::check, SCIP_Cons::consdata, SCIP_Cons::conshdlr, SCIP_Cons::dynamic, SCIP_Cons::enforce, FALSE, SCIP_Cons::initial, SCIP_Cons::local, SCIP_Cons::modifiable, SCIP_Cons::name, NULL, SCIP_Cons::nupgradelocks, SCIP_Cons::original, SCIP_Cons::propagate, SCIP_Cons::removable, SCIP_Cons::scip, SCIP_CALL, SCIP_OKAY, SCIPconsCapture(), SCIPconsCreate(), SCIPconsSetInitial(), SCIP_Cons::separate, SCIP_Cons::stickingatnode, and SCIP_Cons::transorigcons.
Referenced by SCIPconsDelete(), SCIPprobTransform(), SCIPtransformCons(), and SCIPtransformConss().
◆ SCIPconsSetInitial()
SCIP_RETCODE SCIPconsSetInitial | ( | SCIP_CONS * | cons, |
SCIP_SET * | set, | ||
SCIP_STAT * | stat, | ||
SCIP_Bool | initial | ||
) |
sets the initial flag of the given constraint
- Parameters
-
cons constraint set global SCIP settings stat dynamic problem statistics initial new value
Definition at line 6464 of file cons.c.
References conshdlrAddInitcons(), conshdlrDelInitcons(), SCIP_Cons::initconsspos, SCIP_Cons::initial, NULL, SCIP_Cons::original, SCIP_Cons::scip, SCIP_CALL, SCIP_OKAY, SCIPconsGetHdlr(), and SCIPconsSetSeparated().
Referenced by SCIPconsTransform(), and SCIPsetConsInitial().
◆ SCIPconsSetSeparated()
SCIP_RETCODE SCIPconsSetSeparated | ( | SCIP_CONS * | cons, |
SCIP_SET * | set, | ||
SCIP_Bool | separate | ||
) |
sets the separate flag of the given constraint
- Parameters
-
cons constraint set global SCIP settings separate new value
Definition at line 6498 of file cons.c.
References SCIP_Cons::conshdlr, conshdlrAddSepacons(), conshdlrDelSepacons(), SCIP_Cons::enabled, NULL, SCIP_Cons::scip, SCIP_CALL, SCIP_OKAY, SCIP_STAGE_PROBLEM, SCIPconsSetEnforced(), SCIPsetGetStage(), SCIP_Cons::sepaenabled, and SCIP_Cons::separate.
Referenced by SCIPconsSetInitial(), and SCIPsetConsSeparated().
◆ SCIPconsSetEnforced()
SCIP_RETCODE SCIPconsSetEnforced | ( | SCIP_CONS * | cons, |
SCIP_SET * | set, | ||
SCIP_Bool | enforce | ||
) |
sets the enforce flag of the given constraint
- Parameters
-
cons constraint set global SCIP settings enforce new value
Definition at line 6533 of file cons.c.
References SCIP_Cons::conshdlr, conshdlrAddEnfocons(), conshdlrDelEnfocons(), SCIP_Cons::enabled, SCIP_Cons::enforce, NULL, SCIP_Cons::scip, SCIP_CALL, SCIP_OKAY, SCIP_STAGE_PROBLEM, SCIPconsSetChecked(), and SCIPsetGetStage().
Referenced by SCIPconsSetSeparated(), and SCIPsetConsEnforced().
◆ SCIPconsSetChecked()
SCIP_RETCODE SCIPconsSetChecked | ( | SCIP_CONS * | cons, |
SCIP_SET * | set, | ||
SCIP_Bool | check | ||
) |
sets the check flag of the given constraint
- Parameters
-
cons constraint set global SCIP settings check new value
Definition at line 6568 of file cons.c.
References SCIP_Cons::active, SCIP_Cons::addarraypos, SCIP_Cons::addconssetchg, SCIP_Cons::check, SCIP_Cons::conshdlr, conshdlrAddCheckcons(), conshdlrDelCheckcons(), NULL, SCIP_Cons::original, SCIP_Cons::scip, SCIP_CALL, SCIP_LOCKTYPE_MODEL, SCIP_OKAY, SCIPconsAddLocks(), and SCIPconsSetPropagated().
Referenced by SCIPconsSetEnforced(), and SCIPsetConsChecked().
◆ SCIPconsSetPropagated()
SCIP_RETCODE SCIPconsSetPropagated | ( | SCIP_CONS * | cons, |
SCIP_SET * | set, | ||
SCIP_Bool | propagate | ||
) |
sets the propagate flag of the given constraint
- Parameters
-
cons constraint set global SCIP settings propagate new value
Definition at line 6616 of file cons.c.
References SCIP_Cons::conshdlr, conshdlrAddPropcons(), conshdlrDelPropcons(), SCIP_Cons::enabled, NULL, SCIP_Cons::propagate, SCIP_Cons::propenabled, SCIP_Cons::scip, SCIP_CALL, SCIP_OKAY, SCIP_STAGE_PROBLEM, SCIPconsSetLocal(), and SCIPsetGetStage().
Referenced by SCIPconsSetChecked(), and SCIPsetConsPropagated().
◆ SCIPconsSetLocal()
sets the local flag of the given constraint
- Parameters
-
cons constraint local new value
Definition at line 6651 of file cons.c.
References SCIP_Cons::local, NULL, SCIPconsSetModifiable(), and SCIP_Cons::validdepth.
Referenced by SCIPaddCons(), SCIPaddConsNode(), SCIPconsSetPropagated(), SCIPprobAddCons(), and SCIPsetConsLocal().
◆ SCIPconsSetModifiable()
sets the modifiable flag of the given constraint
- Parameters
-
cons constraint modifiable new value
Definition at line 6664 of file cons.c.
References SCIP_Cons::modifiable, NULL, and SCIPconsSetDynamic().
Referenced by SCIPconsSetLocal(), SCIPcopyConflicts(), SCIPcopyConss(), SCIPcopyOrigConss(), and SCIPsetConsModifiable().
◆ SCIPconsSetDynamic()
sets the dynamic flag of the given constraint
- Parameters
-
cons constraint dynamic new value
Definition at line 6675 of file cons.c.
References SCIP_Cons::dynamic, NULL, and SCIPconsSetRemovable().
Referenced by SCIPconsSetModifiable(), and SCIPsetConsDynamic().
◆ SCIPconsSetRemovable()
sets the removable flag of the given constraint
- Parameters
-
cons constraint removable new value
Definition at line 6686 of file cons.c.
References NULL, SCIP_Cons::removable, and SCIPconsSetStickingAtNode().
Referenced by SCIPconsSetDynamic(), and SCIPsetConsRemovable().
◆ SCIPconsSetStickingAtNode()
sets the stickingatnode flag of the given constraint
- Parameters
-
cons constraint stickingatnode new value
Definition at line 6697 of file cons.c.
References NULL, SCIPconsSetNamePointer(), and SCIP_Cons::stickingatnode.
Referenced by SCIPconsSetRemovable(), and SCIPsetConsStickingAtNode().
◆ SCIPconsSetNamePointer()
void SCIPconsSetNamePointer | ( | SCIP_CONS * | cons, |
const char * | name | ||
) |
gives the constraint a new name; ATTENTION: to old pointer is over written that might result in a memory leakage
- Parameters
-
cons constraint name new name of constraint
Definition at line 6709 of file cons.c.
References SCIP_Cons::name, NULL, and SCIPconsGetTransformed().
Referenced by SCIPconsSetStickingAtNode(), and SCIPreaderWrite().
◆ SCIPconsGetTransformed()
gets associated transformed constraint of an original constraint, or NULL if no associated transformed constraint exists
- Parameters
-
cons constraint
Definition at line 6723 of file cons.c.
References SCIP_Cons::original, SCIPconsActivate(), and SCIP_Cons::transorigcons.
Referenced by SCIPconflictstoreTransform(), SCIPconsSetNamePointer(), SCIPgetDualSolVal(), SCIPgetTransformedCons(), and SCIPgetTransformedConss().
◆ SCIPconsActivate()
SCIP_RETCODE SCIPconsActivate | ( | SCIP_CONS * | cons, |
SCIP_SET * | set, | ||
SCIP_STAT * | stat, | ||
int | depth, | ||
SCIP_Bool | focusnode | ||
) |
activates constraint or marks constraint to be activated in next update
- Parameters
-
cons constraint set global SCIP settings stat dynamic problem statistics depth depth in the tree where the constraint activation takes place, or -1 for global problem focusnode does the constraint activation take place at the focus node?
Definition at line 6733 of file cons.c.
References SCIP_Cons::active, SCIP_Cons::activedepth, SCIP_Cons::conshdlr, conshdlrActivateCons(), conshdlrAddUpdateCons(), conshdlrAreUpdatesDelayed(), SCIP_Cons::name, SCIP_Conshdlr::name, NULL, SCIP_Cons::original, SCIP_Cons::scip, SCIP_CALL, SCIP_OKAY, SCIPconsDeactivate(), SCIPsetDebugMsg, TRUE, SCIP_Cons::update, SCIP_Cons::updateactfocus, SCIP_Cons::updateactivate, SCIP_Cons::updatedeactivate, SCIP_Cons::updatedisable, SCIP_Cons::updateenable, SCIP_Cons::updatefree, and SCIP_Cons::updateobsolete.
Referenced by SCIPconsGetTransformed(), SCIPconssetchgAddAddedCons(), SCIPconssetchgApply(), SCIPprobAddCons(), and SCIPreoptResetActiveConss().
◆ SCIPconsDeactivate()
SCIP_RETCODE SCIPconsDeactivate | ( | SCIP_CONS * | cons, |
SCIP_SET * | set, | ||
SCIP_STAT * | stat | ||
) |
deactivates constraint or marks constraint to be deactivated in next update
- Parameters
-
cons constraint set global SCIP settings stat dynamic problem statistics
Definition at line 6775 of file cons.c.
References SCIP_Cons::active, SCIP_Cons::activedepth, SCIP_Cons::conshdlr, conshdlrAddUpdateCons(), conshdlrAreUpdatesDelayed(), conshdlrDeactivateCons(), SCIP_Cons::name, SCIP_Conshdlr::name, NULL, SCIP_Cons::original, SCIP_Cons::scip, SCIP_CALL, SCIP_OKAY, SCIPconsEnable(), SCIPsetDebugMsg, TRUE, SCIP_Cons::update, SCIP_Cons::updateactivate, and SCIP_Cons::updatedeactivate.
Referenced by SCIPconsActivate(), SCIPconsDelete(), SCIPconssetchgUndo(), SCIPprobDelCons(), and SCIPreoptResetActiveConss().
◆ SCIPconsEnable()
SCIP_RETCODE SCIPconsEnable | ( | SCIP_CONS * | cons, |
SCIP_SET * | set, | ||
SCIP_STAT * | stat | ||
) |
enables constraint's separation, enforcing, and propagation capabilities or marks them to be enabled in next update
- Parameters
-
cons constraint set global SCIP settings stat dynamic problem statistics
Definition at line 6810 of file cons.c.
References SCIP_Cons::active, SCIP_Cons::conshdlr, conshdlrAddUpdateCons(), conshdlrAreUpdatesDelayed(), conshdlrEnableCons(), SCIP_Cons::enabled, NULL, SCIP_Cons::original, SCIP_Cons::scip, SCIP_CALL, SCIP_OKAY, SCIPconsDisable(), TRUE, SCIP_Cons::update, SCIP_Cons::updateactivate, SCIP_Cons::updatedeactivate, SCIP_Cons::updatedisable, and SCIP_Cons::updateenable.
Referenced by SCIPconsDeactivate(), SCIPconssetchgUndo(), and SCIPenableCons().
◆ SCIPconsDisable()
SCIP_RETCODE SCIPconsDisable | ( | SCIP_CONS * | cons, |
SCIP_SET * | set, | ||
SCIP_STAT * | stat | ||
) |
disables constraint's separation, enforcing, and propagation capabilities or marks them to be disabled in next update
- Parameters
-
cons constraint set global SCIP settings stat dynamic problem statistics
Definition at line 6843 of file cons.c.
References SCIP_Cons::active, SCIP_Cons::conshdlr, conshdlrAddUpdateCons(), conshdlrAreUpdatesDelayed(), conshdlrDisableCons(), SCIP_Cons::enabled, NULL, SCIP_Cons::original, SCIP_Cons::scip, SCIP_CALL, SCIP_OKAY, SCIPconsEnableSeparation(), TRUE, SCIP_Cons::update, SCIP_Cons::updateactivate, SCIP_Cons::updatedisable, and SCIP_Cons::updateenable.
Referenced by SCIPconsEnable(), SCIPconssetchgApply(), SCIPdisableCons(), and SCIPnodeDelCons().
◆ SCIPconsEnableSeparation()
SCIP_RETCODE SCIPconsEnableSeparation | ( | SCIP_CONS * | cons, |
SCIP_SET * | set | ||
) |
enables constraint's separation capabilities or marks them to be enabled in next update
- Parameters
-
cons constraint set global SCIP settings
Definition at line 6877 of file cons.c.
References SCIP_Cons::conshdlr, conshdlrAddUpdateCons(), conshdlrAreUpdatesDelayed(), conshdlrEnableConsSeparation(), FALSE, NULL, SCIP_Cons::scip, SCIP_CALL, SCIP_OKAY, SCIPconsDisableSeparation(), SCIP_Cons::sepaenabled, TRUE, SCIP_Cons::update, SCIP_Cons::updatesepadisable, and SCIP_Cons::updatesepaenable.
Referenced by SCIPconsDisable(), and SCIPenableConsSeparation().
◆ SCIPconsDisableSeparation()
SCIP_RETCODE SCIPconsDisableSeparation | ( | SCIP_CONS * | cons, |
SCIP_SET * | set | ||
) |
disables constraint's separation capabilities or marks them to be disabled in next update
- Parameters
-
cons constraint set global SCIP settings
Definition at line 6907 of file cons.c.
References SCIP_Cons::conshdlr, conshdlrAddUpdateCons(), conshdlrAreUpdatesDelayed(), conshdlrDisableConsSeparation(), FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPconsEnablePropagation(), SCIP_Cons::sepaenabled, TRUE, SCIP_Cons::update, SCIP_Cons::updatesepadisable, and SCIP_Cons::updatesepaenable.
Referenced by SCIPconsEnableSeparation(), and SCIPdisableConsSeparation().
◆ SCIPconsEnablePropagation()
SCIP_RETCODE SCIPconsEnablePropagation | ( | SCIP_CONS * | cons, |
SCIP_SET * | set | ||
) |
enables constraint's propagation capabilities or marks them to be enabled in next update
- Parameters
-
cons constraint set global SCIP settings
Definition at line 6935 of file cons.c.
References SCIP_Cons::conshdlr, conshdlrAddUpdateCons(), conshdlrAreUpdatesDelayed(), conshdlrEnableConsPropagation(), FALSE, NULL, SCIP_Cons::propenabled, SCIP_Cons::scip, SCIP_CALL, SCIP_OKAY, SCIPconsDisablePropagation(), TRUE, SCIP_Cons::update, SCIP_Cons::updatepropdisable, and SCIP_Cons::updatepropenable.
Referenced by SCIPconsDisableSeparation(), and SCIPenableConsPropagation().
◆ SCIPconsDisablePropagation()
SCIP_RETCODE SCIPconsDisablePropagation | ( | SCIP_CONS * | cons, |
SCIP_SET * | set | ||
) |
disables constraint's propagation capabilities or marks them to be disabled in next update
- Parameters
-
cons constraint set global SCIP settings
Definition at line 6965 of file cons.c.
References SCIP_Cons::conshdlr, conshdlrAddUpdateCons(), conshdlrAreUpdatesDelayed(), conshdlrDisableConsPropagation(), FALSE, NULL, SCIP_Cons::propenabled, SCIP_Cons::scip, SCIP_CALL, SCIP_OKAY, SCIPconsMarkConflict(), TRUE, SCIP_Cons::update, SCIP_Cons::updatepropdisable, and SCIP_Cons::updatepropenable.
Referenced by SCIPconsEnablePropagation(), and SCIPdisableConsPropagation().
◆ SCIPconsMarkConflict()
void SCIPconsMarkConflict | ( | SCIP_CONS * | cons | ) |
marks the constraint to be a conflict
- Parameters
-
cons constraint
Definition at line 6995 of file cons.c.
References SCIP_Cons::conflict, NULL, SCIPconsMarkPropagate(), and TRUE.
Referenced by createAndAddProofcons(), SCIPaddConflict(), SCIPconflictstoreAddConflict(), SCIPconflictstoreAddDualraycons(), SCIPconflictstoreAddDualsolcons(), and SCIPconsDisablePropagation().
◆ SCIPconsMarkPropagate()
SCIP_EXPORT SCIP_RETCODE SCIPconsMarkPropagate | ( | SCIP_CONS * | cons, |
SCIP_SET * | set | ||
) |
marks the constraint to be propagated (update might be delayed)
- Parameters
-
cons constraint set global SCIP settings
Definition at line 7005 of file cons.c.
References SCIP_Cons::conshdlr, conshdlrAddUpdateCons(), conshdlrAreUpdatesDelayed(), conshdlrMarkConsPropagate(), SCIP_Cons::enabled, FALSE, SCIP_Cons::markpropagate, NULL, SCIP_Cons::scip, SCIP_CALL, SCIP_OKAY, SCIPconsUnmarkPropagate(), TRUE, SCIP_Cons::update, SCIP_Cons::updatemarkpropagate, and SCIP_Cons::updateunmarkpropagate.
Referenced by SCIPconshdlrsResetPropagationStatus(), SCIPconsMarkConflict(), and SCIPmarkConsPropagate().
◆ SCIPconsUnmarkPropagate()
SCIP_RETCODE SCIPconsUnmarkPropagate | ( | SCIP_CONS * | cons, |
SCIP_SET * | set | ||
) |
unmarks the constraint to be propagated (update might be delayed)
- Parameters
-
cons constraint set global SCIP settings
Definition at line 7035 of file cons.c.
References SCIP_Cons::conshdlr, conshdlrAddUpdateCons(), conshdlrAreUpdatesDelayed(), conshdlrUnmarkConsPropagate(), SCIP_Cons::enabled, FALSE, SCIP_Cons::markpropagate, NULL, SCIP_Cons::scip, SCIP_CALL, SCIP_OKAY, SCIPconsAddAge(), TRUE, SCIP_Cons::update, SCIP_Cons::updatemarkpropagate, and SCIP_Cons::updateunmarkpropagate.
Referenced by SCIPconshdlrsResetPropagationStatus(), SCIPconsMarkPropagate(), and SCIPunmarkConsPropagate().
◆ SCIPconsAddAge()
SCIP_RETCODE SCIPconsAddAge | ( | SCIP_CONS * | cons, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat, | ||
SCIP_PROB * | prob, | ||
SCIP_Real | deltaage, | ||
SCIP_REOPT * | reopt | ||
) |
adds given value to age of constraint, but age can never become negative; should be called
- in constraint separation, if no cut was found for this constraint,
- in constraint enforcing, if constraint was feasible, and
- in constraint propagation, if no domain reduction was deduced; if it's age exceeds the constraint age limit, makes constraint obsolete or marks constraint to be made obsolete in next update
- Parameters
-
cons constraint blkmem block memory set global SCIP settings stat dynamic problem statistics prob problem data deltaage value to add to the constraint's age reopt reoptimization data
Definition at line 7072 of file cons.c.
References SCIP_Cons::age, SCIP_Cons::check, consExceedsAgelimit(), consExceedsObsoleteage(), SCIP_Cons::conshdlr, conshdlrAddUpdateCons(), conshdlrAreUpdatesDelayed(), conshdlrMarkConsObsolete(), MAX, SCIP_Cons::name, SCIP_Conshdlr::name, NULL, SCIP_Cons::obsolete, SCIP_Cons::original, SCIP_Cons::scip, SCIP_CALL, SCIP_OKAY, SCIP_STAGE_PRESOLVING, SCIPconsDelete(), SCIPconsIncAge(), SCIPsetDebugMsg, TRUE, SCIP_Cons::update, SCIP_Cons::updateactivate, and SCIP_Cons::updateobsolete.
Referenced by SCIPaddConsAge(), SCIPconsIncAge(), and SCIPconsUnmarkPropagate().
◆ SCIPconsIncAge()
SCIP_RETCODE SCIPconsIncAge | ( | SCIP_CONS * | cons, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat, | ||
SCIP_PROB * | prob, | ||
SCIP_REOPT * | reopt | ||
) |
increases age of constraint by 1.0; should be called
- in constraint separation, if no cut was found for this constraint,
- in constraint enforcing, if constraint was feasible, and
- in constraint propagation, if no domain reduction was deduced; if it's age exceeds the constraint age limit, makes constraint obsolete or marks constraint to be made obsolete in next update
- Parameters
-
cons constraint blkmem block memory set global SCIP settings stat dynamic problem statistics prob problem data reopt reoptimization data
Definition at line 7131 of file cons.c.
References SCIP_CALL, SCIP_OKAY, SCIPconsAddAge(), and SCIPconsResetAge().
Referenced by SCIPconsAddAge(), and SCIPincConsAge().
◆ SCIPconsResetAge()
SCIP_RETCODE SCIPconsResetAge | ( | SCIP_CONS * | cons, |
SCIP_SET * | set | ||
) |
resets age of constraint to zero; should be called
- in constraint separation, if a cut was found for this constraint,
- in constraint enforcing, if the constraint was violated, and
- in constraint propagation, if a domain reduction was deduced; if it was obsolete, makes constraint useful again or marks constraint to be made useful again in next update
- Parameters
-
cons constraint set global SCIP settings
Definition at line 7152 of file cons.c.
References SCIP_Cons::age, SCIP_Cons::conshdlr, conshdlrAddUpdateCons(), conshdlrAreUpdatesDelayed(), conshdlrMarkConsUseful(), conshdlrUpdateAgeresetavg(), SCIP_Cons::name, SCIP_Conshdlr::name, NULL, SCIP_Cons::obsolete, SCIP_Cons::original, SCIP_Cons::scip, SCIP_CALL, SCIP_OKAY, SCIPconsResolvePropagation(), SCIPsetDebugMsg, TRUE, SCIP_Cons::update, SCIP_Cons::updateactivate, and SCIP_Cons::updateobsolete.
Referenced by SCIPconsIncAge(), SCIPprobInitSolve(), and SCIPresetConsAge().
◆ SCIPconsResolvePropagation()
SCIP_RETCODE SCIPconsResolvePropagation | ( | SCIP_CONS * | cons, |
SCIP_SET * | set, | ||
SCIP_VAR * | infervar, | ||
int | inferinfo, | ||
SCIP_BOUNDTYPE | inferboundtype, | ||
SCIP_BDCHGIDX * | bdchgidx, | ||
SCIP_Real | relaxedbd, | ||
SCIP_RESULT * | result | ||
) |
resolves the given conflicting bound, that was deduced by the given constraint, by putting all "reason" bounds leading to the deduction into the conflict queue with calls to SCIPaddConflictLb(), SCIPaddConflictUb(), SCIPaddConflictBd(), SCIPaddConflictRelaxedLb(), SCIPaddConflictRelaxedUb(), SCIPaddConflictRelaxedBd(), or SCIPaddConflictBinvar();
- Note
- it is sufficient to explain the relaxed bound change
- Parameters
-
cons constraint that deduced the assignment set global SCIP settings infervar variable whose bound was deduced by the constraint inferinfo user inference information attached to the bound change inferboundtype bound that was deduced (lower or upper bound) bdchgidx bound change index, representing the point of time where change took place relaxedbd the relaxed bound result pointer to store the result of the callback method
Definition at line 7193 of file cons.c.
References SCIP_Cons::conshdlr, SCIP_Conshdlr::name, SCIP_Conshdlr::nrespropcalls, NULL, SCIP_Conshdlr::resproptime, SCIP_Cons::scip, SCIP_BOUNDTYPE_LOWER, SCIP_BOUNDTYPE_UPPER, SCIP_CALL, SCIP_DIDNOTFIND, SCIP_DIDNOTRUN, SCIP_INVALIDRESULT, SCIP_OKAY, SCIP_PLUGINNOTFOUND, SCIP_SUCCESS, SCIPclockStart(), SCIPclockStop(), SCIPconsAddLocks(), SCIPerrorMessage, SCIPgetVarLbAtIndex(), SCIPgetVarUbAtIndex(), SCIPvarGetLbGlobal(), SCIPvarGetUbGlobal(), and TRUE.
Referenced by conflictResolveBound(), and SCIPconsResetAge().
◆ SCIPconsAddLocks()
SCIP_RETCODE SCIPconsAddLocks | ( | SCIP_CONS * | cons, |
SCIP_SET * | set, | ||
SCIP_LOCKTYPE | locktype, | ||
int | nlockspos, | ||
int | nlocksneg | ||
) |
adds given values to lock status of the constraint and updates the locks of the given locktype of the involved variables
- Parameters
-
cons constraint set global SCIP settings locktype type of variable locks nlockspos increase in number of rounding locks for constraint nlocksneg increase in number of rounding locks for constraint's negation
Definition at line 7253 of file cons.c.
References SCIP_Cons::conshdlr, SCIP_Cons::nlocksneg, SCIP_Cons::nlockspos, NLOCKTYPES, NULL, SCIP_Cons::scip, SCIP_CALL, SCIP_OKAY, and SCIPconsCheck().
Referenced by delPosConflict(), delPosDualray(), delPosDualsol(), SCIPaddConsLocksType(), SCIPconflictstoreAddConflict(), SCIPconflictstoreAddDualraycons(), SCIPconflictstoreAddDualsolcons(), SCIPconsResolvePropagation(), SCIPconsSetChecked(), SCIPprobAddCons(), and SCIPprobDelCons().
◆ SCIP_DECL_HASHGETKEY()
SCIP_DECL_HASHGETKEY | ( | SCIPhashGetKeyCons | ) |
gets the key (i.e. the name) of the given constraint
Definition at line 7787 of file cons.c.
Referenced by SCIPconsDeactive().
◆ SCIPconshdlrsStorePropagationStatus()
SCIP_RETCODE SCIPconshdlrsStorePropagationStatus | ( | SCIP_SET * | set, |
SCIP_CONSHDLR ** | conshdlrs, | ||
int | nconshdlrs | ||
) |
stores all constraints marked for propagation away when probing is started
- Parameters
-
set global SCIP settings conshdlrs all constraint handlers nconshdlrs number of contraint handlers
Definition at line 7826 of file cons.c.
References BMScopyMemoryArray, ensurePropagationStorage(), SCIP_Conshdlr::lastpropdomchgcount, SCIP_Conshdlr::nmarkedpropconss, NULL, SCIP_Conshdlr::propconss, SCIP_CALL, SCIP_OKAY, SCIPconsCapture(), SCIPconshdlrsResetPropagationStatus(), SCIP_Conshdlr::storednmarkedpropconss, SCIP_Conshdlr::storedpropconss, and SCIP_Conshdlr::storedpropdomchgcount.
Referenced by ensurePropagationStorage(), and SCIPtreeStartProbing().
◆ SCIPconshdlrsResetPropagationStatus()
SCIP_RETCODE SCIPconshdlrsResetPropagationStatus | ( | SCIP_SET * | set, |
BMS_BLKMEM * | blkmem, | ||
SCIP_CONSHDLR ** | conshdlrs, | ||
int | nconshdlrs | ||
) |
reset all constraints marked for propagation when probing was finished
- Parameters
-
set global SCIP settings blkmem block memory conshdlrs all constraint handlers nconshdlrs number of contraint handlers
Definition at line 7866 of file cons.c.
References conshdlrAreUpdatesDelayed(), SCIP_Cons::enabled, SCIP_Conshdlr::lastpropdomchgcount, SCIP_Conshdlr::nmarkedpropconss, NULL, SCIP_Conshdlr::nupdateconss, SCIP_Cons::propagate, SCIP_Conshdlr::propconss, SCIP_Cons::propenabled, SCIP_CALL, SCIP_OKAY, SCIPconsMarkPropagate(), SCIPconsRelease(), SCIPconsUnmarkPropagate(), SCIPlinConsStatsCreate(), SCIP_Conshdlr::storednmarkedpropconss, SCIP_Conshdlr::storedpropconss, and SCIP_Conshdlr::storedpropdomchgcount.
Referenced by SCIPconshdlrsStorePropagationStatus(), and SCIPtreeEndProbing().