conflict.c File Reference

Detailed Description

methods and datastructures for conflict analysis

Author

Tobias Achterberg

Timo Berthold

Stefan Heinz

Marc Pfetsch

Michael Winkler

Jakob Witzig

This file implements a conflict analysis method like the one used in modern SAT solvers like zchaff. The algorithm works as follows:

Given is a set of bound changes that are not allowed being applied simultaneously, because they render the current node infeasible (e.g. because a single constraint is infeasible in the these bounds, or because the LP relaxation is infeasible). The goal is to deduce a clause on variables – a conflict clause – representing the "reason" for this conflict, i.e., the branching decisions or the deductions (applied e.g. in domain propagation) that lead to the conflict. This clause can then be added to the constraint set to help cutting off similar parts of the branch and bound tree, that would lead to the same conflict. A conflict clause can also be generated, if the conflict was detected by a locally valid constraint. In this case, the resulting conflict clause is also locally valid in the same depth as the conflict detecting constraint. If all involved variables are binary, a linear (set covering) constraint can be generated, otherwise a bound disjunction constraint is generated. Details are given in

Tobias Achterberg, Conflict Analysis in Mixed Integer Programming
Discrete Optimization, 4, 4-20 (2007)

See also How to use conflict analysis. Here is an outline of the algorithm:

1. Put all the given bound changes to a priority queue, which is ordered, such that the bound change that was applied last due to branching or deduction is at the top of the queue. The variables in the queue are always active problem variables. Because binary variables are preferred over general integer variables, integer variables are put on the priority queue prior to the binary variables. Create an empty conflict set.
2. Remove the top bound change b from the priority queue.
3. Perform the following case distinction:
   1. If the remaining queue is non-empty, and bound change b' (the one that is now on the top of the queue) was applied at the same depth level as b, and if b was a deduction with known inference reason, and if the inference constraint's valid depth is smaller or equal to the conflict detecting constraint's valid depth:
      • Resolve bound change b by asking the constraint that inferred the bound change to put all the bound changes on the priority queue, that lead to the deduction of b. Note that these bound changes have at most the same inference depth level as b, and were deduced earlier than b.
   2. Otherwise, the bound change b was a branching decision or a deduction with missing inference reason, or the inference constraint's validity is more local than the one of the conflict detecting constraint.
      • If a the bound changed corresponds to a binary variable, add it or its negation to the conflict set, depending on which of them is currently fixed to FALSE (i.e., the conflict set consists of literals that cannot be FALSE altogether at the same time).
      • Otherwise put the bound change into the conflict set. Note that if the bound change was a branching, all deduced bound changes remaining in the priority queue have smaller inference depth level than b, since deductions are always applied after the branching decisions. However, there is the possibility, that b was a deduction, where the inference reason was not given or the inference constraint was too local. With this lack of information, we must treat the deduced bound change like a branching, and there may exist other deduced bound changes of the same inference depth level in the priority queue.
4. If priority queue is non-empty, goto step 2.
5. The conflict set represents the conflict clause saying that at least one of the conflict variables must take a different value. The conflict set is then passed to the conflict handlers, that may create a corresponding constraint (e.g. a logicor constraint or bound disjunction constraint) out of these conflict variables and add it to the problem.

If all deduced bound changes come with (global) inference information, depending on the conflict analyzing strategy, the resulting conflict set has the following property:

• 1-FirstUIP: In the depth level where the conflict was found, at most one variable assigned at that level is member of the conflict set. This conflict variable is the first unique implication point of its depth level (FUIP).
• All-FirstUIP: For each depth level, at most one variable assigned at that level is member of the conflict set. This conflict variable is the first unique implication point of its depth level (FUIP).

The user has to do the following to get the conflict analysis running in its current implementation:

• A constraint handler or propagator supporting the conflict analysis must implement the CONSRESPROP/PROPRESPROP call, that processes a bound change inference b and puts all the reason bounds leading to the application of b with calls to SCIPaddConflictBound() on the conflict queue (algorithm step 3.(a)).
• If the current bounds lead to a deduction of a bound change (e.g. in domain propagation), a constraint handler should call SCIPinferVarLbCons() or SCIPinferVarUbCons(), thus providing the constraint that infered the bound change. A propagator should call SCIPinferVarLbProp() or SCIPinferVarUbProp() instead, thus providing a pointer to itself.
• If (in the current bounds) an infeasibility is detected, the constraint handler or propagator should
  1. call SCIPinitConflictAnalysis() to initialize the conflict queue,
  2. call SCIPaddConflictBound() for each bound that lead to the conflict,
  3. call SCIPanalyzeConflictCons() or SCIPanalyzeConflict() to analyze the conflict and add an appropriate conflict constraint.

Definition in file conflict.c.

#include "lpi/lpi.h"
#include "scip/clock.h"
#include "scip/conflict.h"
#include "scip/conflictstore.h"
#include "scip/cons.h"
#include "scip/cons_linear.h"
#include "scip/cuts.h"
#include "scip/history.h"
#include "scip/lp.h"
#include "scip/presolve.h"
#include "scip/prob.h"
#include "scip/prop.h"
#include "scip/pub_conflict.h"
#include "scip/pub_cons.h"
#include "scip/pub_lp.h"
#include "scip/pub_message.h"
#include "scip/pub_misc.h"
#include "scip/pub_misc_sort.h"
#include "scip/pub_paramset.h"
#include "scip/pub_prop.h"
#include "scip/pub_tree.h"
#include "scip/pub_var.h"
#include "scip/scip_conflict.h"
#include "scip/scip_cons.h"
#include "scip/scip_mem.h"
#include "scip/scip_sol.h"
#include "scip/scip_var.h"
#include "scip/set.h"
#include "scip/sol.h"
#include "scip/struct_conflict.h"
#include "scip/struct_lp.h"
#include "scip/struct_prob.h"
#include "scip/struct_set.h"
#include "scip/struct_stat.h"
#include "scip/struct_tree.h"
#include "scip/struct_var.h"
#include "scip/tree.h"
#include "scip/var.h"
#include "scip/visual.h"
#include <string.h>
#include <strings.h>

Go to the source code of this file.

Macros
#define	BOUNDSWITCH   0.51
#define	POSTPROCESS   FALSE
#define	USEVBDS   FALSE
#define	ALLOWLOCAL   FALSE
#define	MINFRAC   0.05
#define	MAXFRAC   0.999
#define	NUMSTOP   9007199254740992.0
#define	debugPrintViolationInfo(...)

Functions
	SCIP_DECL_SORTPTRCOMP (SCIPconflicthdlrComp)
	SCIP_DECL_SORTPTRCOMP (SCIPconflicthdlrCompName)
static	SCIP_DECL_PARAMCHGD (paramChgdConflicthdlrPriority)
SCIP_RETCODE	SCIPconflicthdlrCopyInclude (SCIP_CONFLICTHDLR *conflicthdlr, SCIP_SET *set)
static SCIP_RETCODE	doConflicthdlrCreate (SCIP_CONFLICTHDLR **conflicthdlr, SCIP_SET *set, SCIP_MESSAGEHDLR *messagehdlr, BMS_BLKMEM *blkmem, const char *name, const char *desc, int priority, SCIP_DECL_CONFLICTCOPY((*conflictcopy)), SCIP_DECL_CONFLICTFREE((*conflictfree)), SCIP_DECL_CONFLICTINIT((*conflictinit)), SCIP_DECL_CONFLICTEXIT((*conflictexit)), SCIP_DECL_CONFLICTINITSOL((*conflictinitsol)), SCIP_DECL_CONFLICTEXITSOL((*conflictexitsol)), SCIP_DECL_CONFLICTEXEC((*conflictexec)), SCIP_CONFLICTHDLRDATA *conflicthdlrdata)
SCIP_RETCODE	SCIPconflicthdlrCreate (SCIP_CONFLICTHDLR **conflicthdlr, SCIP_SET *set, SCIP_MESSAGEHDLR *messagehdlr, BMS_BLKMEM *blkmem, const char *name, const char *desc, int priority, SCIP_DECL_CONFLICTCOPY((*conflictcopy)), SCIP_DECL_CONFLICTFREE((*conflictfree)), SCIP_DECL_CONFLICTINIT((*conflictinit)), SCIP_DECL_CONFLICTEXIT((*conflictexit)), SCIP_DECL_CONFLICTINITSOL((*conflictinitsol)), SCIP_DECL_CONFLICTEXITSOL((*conflictexitsol)), SCIP_DECL_CONFLICTEXEC((*conflictexec)), SCIP_CONFLICTHDLRDATA *conflicthdlrdata)
SCIP_RETCODE	SCIPconflicthdlrFree (SCIP_CONFLICTHDLR **conflicthdlr, SCIP_SET *set)
SCIP_RETCODE	SCIPconflicthdlrInit (SCIP_CONFLICTHDLR *conflicthdlr, SCIP_SET *set)
SCIP_RETCODE	SCIPconflicthdlrExit (SCIP_CONFLICTHDLR *conflicthdlr, SCIP_SET *set)
SCIP_RETCODE	SCIPconflicthdlrInitsol (SCIP_CONFLICTHDLR *conflicthdlr, SCIP_SET *set)
SCIP_RETCODE	SCIPconflicthdlrExitsol (SCIP_CONFLICTHDLR *conflicthdlr, SCIP_SET *set)
SCIP_RETCODE	SCIPconflicthdlrExec (SCIP_CONFLICTHDLR *conflicthdlr, SCIP_SET *set, SCIP_NODE *node, SCIP_NODE *validnode, SCIP_BDCHGINFO **bdchginfos, SCIP_Real *relaxedbds, int nbdchginfos, SCIP_CONFTYPE conftype, SCIP_Bool usescutoffbound, SCIP_Bool resolved, SCIP_RESULT *result)
SCIP_CONFLICTHDLRDATA *	SCIPconflicthdlrGetData (SCIP_CONFLICTHDLR *conflicthdlr)
void	SCIPconflicthdlrSetData (SCIP_CONFLICTHDLR *conflicthdlr, SCIP_CONFLICTHDLRDATA *conflicthdlrdata)
void	SCIPconflicthdlrSetCopy (SCIP_CONFLICTHDLR *conflicthdlr, SCIP_DECL_CONFLICTCOPY((*conflictcopy)))
void	SCIPconflicthdlrSetFree (SCIP_CONFLICTHDLR *conflicthdlr, SCIP_DECL_CONFLICTFREE((*conflictfree)))
void	SCIPconflicthdlrSetInit (SCIP_CONFLICTHDLR *conflicthdlr, SCIP_DECL_CONFLICTINIT((*conflictinit)))
void	SCIPconflicthdlrSetExit (SCIP_CONFLICTHDLR *conflicthdlr, SCIP_DECL_CONFLICTEXIT((*conflictexit)))
void	SCIPconflicthdlrSetInitsol (SCIP_CONFLICTHDLR *conflicthdlr, SCIP_DECL_CONFLICTINITSOL((*conflictinitsol)))
void	SCIPconflicthdlrSetExitsol (SCIP_CONFLICTHDLR *conflicthdlr, SCIP_DECL_CONFLICTEXITSOL((*conflictexitsol)))
const char *	SCIPconflicthdlrGetName (SCIP_CONFLICTHDLR *conflicthdlr)
const char *	SCIPconflicthdlrGetDesc (SCIP_CONFLICTHDLR *conflicthdlr)
int	SCIPconflicthdlrGetPriority (SCIP_CONFLICTHDLR *conflicthdlr)
void	SCIPconflicthdlrSetPriority (SCIP_CONFLICTHDLR *conflicthdlr, SCIP_SET *set, int priority)
SCIP_Bool	SCIPconflicthdlrIsInitialized (SCIP_CONFLICTHDLR *conflicthdlr)
void	SCIPconflicthdlrEnableOrDisableClocks (SCIP_CONFLICTHDLR *conflicthdlr, SCIP_Bool enable)
SCIP_Real	SCIPconflicthdlrGetSetupTime (SCIP_CONFLICTHDLR *conflicthdlr)
SCIP_Real	SCIPconflicthdlrGetTime (SCIP_CONFLICTHDLR *conflicthdlr)
static SCIP_RETCODE	lpbdchgsCreate (SCIP_LPBDCHGS **lpbdchgs, SCIP_SET *set, int ncols)
static void	lpbdchgsReset (SCIP_LPBDCHGS *lpbdchgs, int ncols)
static void	lpbdchgsFree (SCIP_LPBDCHGS **lpbdchgs, SCIP_SET *set)
static char	varGetChar (SCIP_VAR *var)
static void	proofsetClear (SCIP_PROOFSET *proofset)
static SCIP_RETCODE	proofsetCreate (SCIP_PROOFSET **proofset, BMS_BLKMEM *blkmem)
static SCIP_RETCODE	conflictInitProofset (SCIP_CONFLICT *conflict, BMS_BLKMEM *blkmem)
static void	proofsetFree (SCIP_PROOFSET **proofset, BMS_BLKMEM *blkmem)
static int *	proofsetGetInds (SCIP_PROOFSET *proofset)
static SCIP_Real *	proofsetGetVals (SCIP_PROOFSET *proofset)
static SCIP_Real	proofsetGetRhs (SCIP_PROOFSET *proofset)
static int	proofsetGetNVars (SCIP_PROOFSET *proofset)
static SCIP_CONFTYPE	proofsetGetConftype (SCIP_PROOFSET *proofset)
static SCIP_RETCODE	proofsetAddSparseData (SCIP_PROOFSET *proofset, BMS_BLKMEM *blkmem, SCIP_Real *vals, int *inds, int nnz, SCIP_Real rhs)
static SCIP_RETCODE	proofsetAddAggrrow (SCIP_PROOFSET *proofset, SCIP_SET *set, BMS_BLKMEM *blkmem, SCIP_AGGRROW *aggrrow)
static void	proofsetCancelVarWithBound (SCIP_PROOFSET *proofset, SCIP_SET *set, SCIP_VAR *var, int pos, SCIP_Bool *valid)
static SCIP_RETCODE	conflictEnsureTmpbdchginfosMem (SCIP_CONFLICT *conflict, SCIP_SET *set, int num)
static SCIP_RETCODE	conflictCreateTmpBdchginfo (SCIP_CONFLICT *conflict, BMS_BLKMEM *blkmem, SCIP_SET *set, SCIP_VAR *var, SCIP_BOUNDTYPE boundtype, SCIP_Real oldbound, SCIP_Real newbound, SCIP_BDCHGINFO **bdchginfo)
static void	conflictFreeTmpBdchginfos (SCIP_CONFLICT *conflict, BMS_BLKMEM *blkmem)
static void	conflictsetClear (SCIP_CONFLICTSET *conflictset)
static SCIP_RETCODE	conflictsetCreate (SCIP_CONFLICTSET **conflictset, BMS_BLKMEM *blkmem)
static SCIP_RETCODE	conflictsetCopy (SCIP_CONFLICTSET **targetconflictset, BMS_BLKMEM *blkmem, SCIP_CONFLICTSET *sourceconflictset, int nadditionalelems)
static void	conflictsetFree (SCIP_CONFLICTSET **conflictset, BMS_BLKMEM *blkmem)
static SCIP_RETCODE	conflictsetEnsureBdchginfosMem (SCIP_CONFLICTSET *conflictset, BMS_BLKMEM *blkmem, SCIP_SET *set, int num)
static SCIP_Real	conflictsetCalcScore (SCIP_CONFLICTSET *conflictset, SCIP_SET *set)
static SCIP_Real	calcBdchgScore (SCIP_Real prooflhs, SCIP_Real proofact, SCIP_Real proofactdelta, SCIP_Real proofcoef, int depth, int currentdepth, SCIP_VAR *var, SCIP_SET *set)
static SCIP_Bool	bdchginfoIsInvalid (SCIP_CONFLICT *conflict, SCIP_BDCHGINFO *bdchginfo)
static SCIP_RETCODE	conflictsetAddBound (SCIP_CONFLICTSET *conflictset, BMS_BLKMEM *blkmem, SCIP_SET *set, SCIP_BDCHGINFO *bdchginfo, SCIP_Real relaxedbd)
static SCIP_RETCODE	conflictsetAddBounds (SCIP_CONFLICT *conflict, SCIP_CONFLICTSET *conflictset, BMS_BLKMEM *blkmem, SCIP_SET *set, SCIP_BDCHGINFO **bdchginfos, int nbdchginfos)
static void	conflictsetCalcConflictDepth (SCIP_CONFLICTSET *conflictset)
static SCIP_RETCODE	conflictsetCalcInsertDepth (SCIP_CONFLICTSET *conflictset, SCIP_SET *set, SCIP_TREE *tree)
static SCIP_Bool	conflictsetIsRedundant (SCIP_CONFLICTSET *conflictset1, SCIP_CONFLICTSET *conflictset2)
static SCIP_RETCODE	conflictEnsureProofsetsMem (SCIP_CONFLICT *conflict, SCIP_SET *set, int num)
static SCIP_RETCODE	conflictEnsureConflictsetsMem (SCIP_CONFLICT *conflict, SCIP_SET *set, int num)
static SCIP_RETCODE	conflictInsertProofset (SCIP_CONFLICT *conflict, SCIP_SET *set, SCIP_PROOFSET *proofset)
static SCIP_RETCODE	conflictInsertConflictset (SCIP_CONFLICT *conflict, BMS_BLKMEM *blkmem, SCIP_SET *set, SCIP_CONFLICTSET **conflictset)
static int	conflictCalcMaxsize (SCIP_SET *set, SCIP_PROB *prob)
static SCIP_RETCODE	incVSIDS (SCIP_VAR *var, BMS_BLKMEM *blkmem, SCIP_SET *set, SCIP_STAT *stat, SCIP_BOUNDTYPE boundtype, SCIP_Real value, SCIP_Real weight)
static SCIP_RETCODE	updateStatistics (SCIP_CONFLICT *conflict, BMS_BLKMEM *blkmem, SCIP_SET *set, SCIP_STAT *stat, SCIP_CONFLICTSET *conflictset, int insertdepth)
static SCIP_Bool	checkRedundancy (SCIP_SET *set, SCIP_CONFLICTSET *conflictset)
static SCIP_RETCODE	detectImpliedBounds (SCIP_SET *set, SCIP_PROB *prob, SCIP_CONFLICTSET *conflictset, int *nbdchgs, int *nredvars, SCIP_Bool *redundant)
static SCIP_RETCODE	tightenSingleVar (SCIP_CONFLICT *conflict, SCIP_SET *set, SCIP_STAT *stat, SCIP_TREE *tree, BMS_BLKMEM *blkmem, SCIP_PROB *origprob, SCIP_PROB *transprob, SCIP_REOPT *reopt, SCIP_LP *lp, SCIP_BRANCHCAND *branchcand, SCIP_EVENTQUEUE *eventqueue, SCIP_CLIQUETABLE *cliquetable, SCIP_VAR *var, SCIP_Real val, SCIP_Real rhs, SCIP_CONFTYPE prooftype, int validdepth)
static SCIP_Real	aggrRowGetMinActivity (SCIP_SET *set, SCIP_PROB *transprob, SCIP_AGGRROW *aggrrow, SCIP_Real *curvarlbs, SCIP_Real *curvarubs, SCIP_Bool *infdelta)
static SCIP_Real	getMinActivity (SCIP_SET *set, SCIP_PROB *transprob, SCIP_Real *coefs, int *inds, int nnz, SCIP_Real *curvarlbs, SCIP_Real *curvarubs)
static SCIP_Real	getMaxActivity (SCIP_SET *set, SCIP_PROB *transprob, SCIP_Real *coefs, int *inds, int nnz, SCIP_Real *curvarlbs, SCIP_Real *curvarubs)
static SCIP_RETCODE	propagateLongProof (SCIP_CONFLICT *conflict, SCIP_SET *set, SCIP_STAT *stat, SCIP_REOPT *reopt, SCIP_TREE *tree, BMS_BLKMEM *blkmem, SCIP_PROB *origprob, SCIP_PROB *transprob, SCIP_LP *lp, SCIP_BRANCHCAND *branchcand, SCIP_EVENTQUEUE *eventqueue, SCIP_CLIQUETABLE *cliquetable, SCIP_Real *coefs, int *inds, int nnz, SCIP_Real rhs, SCIP_CONFTYPE conflicttype, int validdepth)
static SCIP_RETCODE	createAndAddProofcons (SCIP_CONFLICT *conflict, SCIP_CONFLICTSTORE *conflictstore, SCIP_PROOFSET *proofset, SCIP_SET *set, SCIP_STAT *stat, SCIP_PROB *origprob, SCIP_PROB *transprob, SCIP_TREE *tree, SCIP_REOPT *reopt, SCIP_LP *lp, SCIP_BRANCHCAND *branchcand, SCIP_EVENTQUEUE *eventqueue, SCIP_CLIQUETABLE *cliquetable, BMS_BLKMEM *blkmem)
static SCIP_RETCODE	conflictFlushProofset (SCIP_CONFLICT *conflict, SCIP_CONFLICTSTORE *conflictstore, BMS_BLKMEM *blkmem, SCIP_SET *set, SCIP_STAT *stat, SCIP_PROB *transprob, SCIP_PROB *origprob, SCIP_TREE *tree, SCIP_REOPT *reopt, SCIP_LP *lp, SCIP_BRANCHCAND *branchcand, SCIP_EVENTQUEUE *eventqueue, SCIP_CLIQUETABLE *cliquetable)
static SCIP_RETCODE	conflictAddConflictCons (SCIP_CONFLICT *conflict, BMS_BLKMEM *blkmem, SCIP_SET *set, SCIP_STAT *stat, SCIP_PROB *transprob, SCIP_PROB *origprob, SCIP_TREE *tree, SCIP_REOPT *reopt, SCIP_LP *lp, SCIP_BRANCHCAND *branchcand, SCIP_EVENTQUEUE *eventqueue, SCIP_CLIQUETABLE *cliquetable, SCIP_CONFLICTSET *conflictset, int insertdepth, SCIP_Bool *success)
SCIP_RETCODE	SCIPconflictFlushConss (SCIP_CONFLICT *conflict, BMS_BLKMEM *blkmem, SCIP_SET *set, SCIP_STAT *stat, SCIP_PROB *transprob, SCIP_PROB *origprob, SCIP_TREE *tree, SCIP_REOPT *reopt, SCIP_LP *lp, SCIP_BRANCHCAND *branchcand, SCIP_EVENTQUEUE *eventqueue, SCIP_CLIQUETABLE *cliquetable)
int	SCIPconflictGetNConflicts (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNAppliedConss (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNAppliedLiterals (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNGlobalChgBds (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNAppliedGlobalConss (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNAppliedGlobalLiterals (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNLocalChgBds (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNAppliedLocalConss (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNAppliedLocalLiterals (SCIP_CONFLICT *conflict)
static SCIP_Bool	bdchginfoIsResolvable (SCIP_BDCHGINFO *bdchginfo)
static	SCIP_DECL_SORTPTRCOMP (conflictBdchginfoComp)
SCIP_Bool	SCIPconflictApplicable (SCIP_SET *set)
SCIP_RETCODE	SCIPconflictCreate (SCIP_CONFLICT **conflict, BMS_BLKMEM *blkmem, SCIP_SET *set)
SCIP_RETCODE	SCIPconflictFree (SCIP_CONFLICT **conflict, BMS_BLKMEM *blkmem)
static void	conflictClear (SCIP_CONFLICT *conflict)
SCIP_RETCODE	SCIPconflictInit (SCIP_CONFLICT *conflict, SCIP_SET *set, SCIP_STAT *stat, SCIP_PROB *prob, SCIP_CONFTYPE conftype, SCIP_Bool usescutoffbound)
static SCIP_Bool	conflictMarkBoundCheckPresence (SCIP_CONFLICT *conflict, SCIP_SET *set, SCIP_BDCHGINFO *bdchginfo, SCIP_Real relaxedbd)
static SCIP_RETCODE	conflictAddConflictBound (SCIP_CONFLICT *conflict, BMS_BLKMEM *blkmem, SCIP_SET *set, SCIP_BDCHGINFO *bdchginfo, SCIP_Real relaxedbd)
static SCIP_Bool	isBoundchgUseless (SCIP_SET *set, SCIP_BDCHGINFO *bdchginfo)
static SCIP_RETCODE	conflictQueueBound (SCIP_CONFLICT *conflict, SCIP_SET *set, SCIP_BDCHGINFO *bdchginfo, SCIP_Real relaxedbd)
static SCIP_RETCODE	convertToActiveVar (SCIP_VAR **var, SCIP_SET *set, SCIP_BOUNDTYPE *boundtype, SCIP_Real *bound)
static SCIP_RETCODE	conflictAddBound (SCIP_CONFLICT *conflict, BMS_BLKMEM *blkmem, SCIP_SET *set, SCIP_STAT *stat, SCIP_VAR *var, SCIP_BOUNDTYPE boundtype, SCIP_BDCHGINFO *bdchginfo, SCIP_Real relaxedbd)
SCIP_RETCODE	SCIPconflictAddBound (SCIP_CONFLICT *conflict, BMS_BLKMEM *blkmem, SCIP_SET *set, SCIP_STAT *stat, SCIP_VAR *var, SCIP_BOUNDTYPE boundtype, SCIP_BDCHGIDX *bdchgidx)
SCIP_RETCODE	SCIPconflictAddRelaxedBound (SCIP_CONFLICT *conflict, BMS_BLKMEM *blkmem, SCIP_SET *set, SCIP_STAT *stat, SCIP_VAR *var, SCIP_BOUNDTYPE boundtype, SCIP_BDCHGIDX *bdchgidx, SCIP_Real relaxedbd)
SCIP_RETCODE	SCIPconflictIsVarUsed (SCIP_CONFLICT *conflict, SCIP_VAR *var, SCIP_SET *set, SCIP_BOUNDTYPE boundtype, SCIP_BDCHGIDX *bdchgidx, SCIP_Bool *used)
SCIP_Real	SCIPconflictGetVarLb (SCIP_CONFLICT *conflict, SCIP_VAR *var)
SCIP_Real	SCIPconflictGetVarUb (SCIP_CONFLICT *conflict, SCIP_VAR *var)
static SCIP_BDCHGINFO *	conflictRemoveCand (SCIP_CONFLICT *conflict)
static SCIP_BDCHGINFO *	conflictFirstCand (SCIP_CONFLICT *conflict)
static SCIP_RETCODE	conflictAddConflictset (SCIP_CONFLICT *conflict, BMS_BLKMEM *blkmem, SCIP_SET *set, SCIP_STAT *stat, SCIP_TREE *tree, int validdepth, SCIP_Bool diving, SCIP_Bool repropagate, SCIP_Bool *success, int *nliterals)
static SCIP_RETCODE	conflictResolveBound (SCIP_CONFLICT *conflict, SCIP_SET *set, SCIP_BDCHGINFO *bdchginfo, SCIP_Real relaxedbd, int validdepth, SCIP_Bool *resolved)
static SCIP_RETCODE	conflictCreateReconvergenceConss (SCIP_CONFLICT *conflict, BMS_BLKMEM *blkmem, SCIP_SET *set, SCIP_STAT *stat, SCIP_PROB *prob, SCIP_TREE *tree, SCIP_Bool diving, int validdepth, SCIP_BDCHGINFO *firstuip, int *nreconvconss, int *nreconvliterals)
static SCIP_RETCODE	conflictAnalyze (SCIP_CONFLICT *conflict, BMS_BLKMEM *blkmem, SCIP_SET *set, SCIP_STAT *stat, SCIP_PROB *prob, SCIP_TREE *tree, SCIP_Bool diving, int validdepth, SCIP_Bool mustresolve, int *nconss, int *nliterals, int *nreconvconss, int *nreconvliterals)
SCIP_RETCODE	SCIPconflictAnalyze (SCIP_CONFLICT *conflict, BMS_BLKMEM *blkmem, SCIP_SET *set, SCIP_STAT *stat, SCIP_PROB *prob, SCIP_TREE *tree, int validdepth, SCIP_Bool *success)
SCIP_Real	SCIPconflictGetGlobalApplTime (SCIP_CONFLICT *conflict)
SCIP_Real	SCIPconflictGetPropTime (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNPropCalls (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNPropSuccess (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNPropConflictConss (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNPropConflictLiterals (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNPropReconvergenceConss (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNPropReconvergenceLiterals (SCIP_CONFLICT *conflict)
static SCIP_RETCODE	ensureSidechgsSize (SCIP_SET *set, int **sidechginds, SCIP_Real **sidechgoldlhss, SCIP_Real **sidechgoldrhss, SCIP_Real **sidechgnewlhss, SCIP_Real **sidechgnewrhss, int *sidechgssize, int num)
static SCIP_RETCODE	addSideRemoval (SCIP_SET *set, SCIP_ROW *row, SCIP_Real lpiinfinity, int **sidechginds, SCIP_Real **sidechgoldlhss, SCIP_Real **sidechgoldrhss, SCIP_Real **sidechgnewlhss, SCIP_Real **sidechgnewrhss, int *sidechgssize, int *nsidechgs)
static SCIP_RETCODE	addBdchg (SCIP_SET *set, SCIP_VAR *var, SCIP_Real newlb, SCIP_Real newub, SCIP_LPBDCHGS *oldlpbdchgs, SCIP_LPBDCHGS *relaxedlpbdchgs, SCIP_LPI *lpi)
static SCIP_RETCODE	ensureCandsSize (SCIP_SET *set, SCIP_VAR ***cands, SCIP_Real **candscores, SCIP_Real **newbounds, SCIP_Real **proofactdeltas, int *candssize, int num)
static SCIP_RETCODE	addCand (SCIP_SET *set, int currentdepth, SCIP_VAR *var, int lbchginfopos, int ubchginfopos, SCIP_Real proofcoef, SCIP_Real prooflhs, SCIP_Real proofact, SCIP_VAR ***cands, SCIP_Real **candscores, SCIP_Real **newbounds, SCIP_Real **proofactdeltas, int *candssize, int *ncands, int firstcand)
static void	skipRedundantBdchginfos (SCIP_VAR *var, int *lbchginfopos, int *ubchginfopos)
static SCIP_RETCODE	undoBdchgsProof (SCIP_SET *set, SCIP_PROB *prob, int currentdepth, SCIP_Real *proofcoefs, SCIP_Real prooflhs, SCIP_Real *proofact, SCIP_Real *curvarlbs, SCIP_Real *curvarubs, int *lbchginfoposs, int *ubchginfoposs, SCIP_LPBDCHGS *oldlpbdchgs, SCIP_LPBDCHGS *relaxedlpbdchgs, SCIP_Bool *resolve, SCIP_LPI *lpi)
static SCIP_RETCODE	undoBdchgsDualfarkas (SCIP_SET *set, SCIP_PROB *prob, SCIP_LP *lp, int currentdepth, SCIP_Real *curvarlbs, SCIP_Real *curvarubs, int *lbchginfoposs, int *ubchginfoposs, SCIP_LPBDCHGS *oldlpbdchgs, SCIP_LPBDCHGS *relaxedlpbdchgs, SCIP_Bool *valid, SCIP_Bool *resolve, SCIP_Real *farkascoefs, SCIP_Real farkaslhs, SCIP_Real *farkasactivity)
static SCIP_RETCODE	undoBdchgsDualsol (SCIP_SET *set, SCIP_PROB *prob, SCIP_LP *lp, int currentdepth, SCIP_Real *curvarlbs, SCIP_Real *curvarubs, int *lbchginfoposs, int *ubchginfoposs, SCIP_LPBDCHGS *oldlpbdchgs, SCIP_LPBDCHGS *relaxedlpbdchgs, SCIP_Bool *valid, SCIP_Bool *resolve, SCIP_Real *dualcoefs, SCIP_Real duallhs, SCIP_Real *dualactivity)
static SCIP_RETCODE	conflictAnalyzeRemainingBdchgs (SCIP_CONFLICT *conflict, BMS_BLKMEM *blkmem, SCIP_SET *set, SCIP_STAT *stat, SCIP_PROB *prob, SCIP_TREE *tree, SCIP_Bool diving, int *lbchginfoposs, int *ubchginfoposs, int *nconss, int *nliterals, int *nreconvconss, int *nreconvliterals)
static SCIP_RETCODE	addRowToAggrRow (SCIP_SET *set, SCIP_ROW *row, SCIP_Real weight, SCIP_AGGRROW *aggrrow)
static SCIP_Bool	checkDualFeasibility (SCIP_SET *set, SCIP_ROW *row, SCIP_Real weight, SCIP_Bool *zerocontribution)
static SCIP_RETCODE	sortLocalRows (SCIP_SET *set, SCIP_AGGRROW *aggrrow, SCIP_ROW **rows, int *rowinds, int *rowdepth, int nrows)
static SCIP_RETCODE	addLocalRows (SCIP_SET *set, SCIP_PROB *transprob, SCIP_LP *lp, SCIP_AGGRROW *proofrow, SCIP_ROW **rows, SCIP_Real *dualsols, int *localrowinds, int *localrowdepth, int nlocalrows, SCIP_Real *proofact, int *validdepth, SCIP_Real *curvarlbs, SCIP_Real *curvarubs, SCIP_Bool *valid)
static SCIP_RETCODE	getFarkasProof (SCIP_SET *set, SCIP_PROB *prob, SCIP_LP *lp, SCIP_LPI *lpi, SCIP_TREE *tree, SCIP_AGGRROW *farkasrow, SCIP_Real *farkasact, int *validdepth, SCIP_Real *curvarlbs, SCIP_Real *curvarubs, SCIP_Bool *valid)
static SCIP_RETCODE	getDualProof (SCIP_SET *set, SCIP_PROB *transprob, SCIP_LP *lp, SCIP_LPI *lpi, SCIP_TREE *tree, SCIP_AGGRROW *farkasrow, SCIP_Real *farkasact, int *validdepth, SCIP_Real *curvarlbs, SCIP_Real *curvarubs, SCIP_Bool *valid)
static void	tightenCoefficients (SCIP_SET *set, SCIP_PROOFSET *proofset, int *nchgcoefs, SCIP_Bool *redundant)
static SCIP_RETCODE	separateAlternativeProofs (SCIP_CONFLICT *conflict, SCIP_SET *set, SCIP_STAT *stat, SCIP_PROB *transprob, SCIP_TREE *tree, BMS_BLKMEM *blkmem, SCIP_AGGRROW *proofrow, SCIP_Real *curvarlbs, SCIP_Real *curvarubs, SCIP_CONFTYPE conflicttype)
static SCIP_RETCODE	tightenDualproof (SCIP_CONFLICT *conflict, SCIP_SET *set, SCIP_STAT *stat, BMS_BLKMEM *blkmem, SCIP_PROB *transprob, SCIP_TREE *tree, SCIP_AGGRROW *proofrow, int validdepth, SCIP_Real *curvarlbs, SCIP_Real *curvarubs, SCIP_Bool initialproof)
static SCIP_RETCODE	conflictAnalyzeDualProof (SCIP_CONFLICT *conflict, SCIP_SET *set, SCIP_STAT *stat, BMS_BLKMEM *blkmem, SCIP_PROB *origprob, SCIP_PROB *transprob, SCIP_TREE *tree, SCIP_REOPT *reopt, SCIP_LP *lp, SCIP_AGGRROW *proofrow, int validdepth, SCIP_Real *curvarlbs, SCIP_Real *curvarubs, SCIP_Bool initialproof, SCIP_Bool *globalinfeasible, SCIP_Bool *success)
static SCIP_RETCODE	runBoundHeuristic (SCIP_CONFLICT *conflict, SCIP_SET *set, SCIP_STAT *stat, SCIP_PROB *origprob, SCIP_PROB *transprob, SCIP_TREE *tree, SCIP_REOPT *reopt, SCIP_LP *lp, SCIP_LPI *lpi, BMS_BLKMEM *blkmem, SCIP_Real *proofcoefs, SCIP_Real *prooflhs, SCIP_Real *proofactivity, SCIP_Real *curvarlbs, SCIP_Real *curvarubs, int *lbchginfoposs, int *ubchginfoposs, int *iterations, SCIP_Bool marklpunsolved, SCIP_Bool *dualproofsuccess, SCIP_Bool *valid)
static SCIP_RETCODE	conflictAnalyzeLP (SCIP_CONFLICT *conflict, SCIP_CONFLICTSTORE *conflictstore, BMS_BLKMEM *blkmem, SCIP_SET *set, SCIP_STAT *stat, SCIP_PROB *transprob, SCIP_PROB *origprob, SCIP_TREE *tree, SCIP_REOPT *reopt, SCIP_LP *lp, SCIP_BRANCHCAND *branchcand, SCIP_EVENTQUEUE *eventqueue, SCIP_CLIQUETABLE *cliquetable, SCIP_Bool diving, SCIP_Bool *dualproofsuccess, int *iterations, int *nconss, int *nliterals, int *nreconvconss, int *nreconvliterals, SCIP_Bool marklpunsolved)
static SCIP_RETCODE	conflictAnalyzeInfeasibleLP (SCIP_CONFLICT *conflict, SCIP_CONFLICTSTORE *conflictstore, BMS_BLKMEM *blkmem, SCIP_SET *set, SCIP_STAT *stat, SCIP_PROB *transprob, SCIP_PROB *origprob, SCIP_TREE *tree, SCIP_REOPT *reopt, SCIP_LP *lp, SCIP_BRANCHCAND *branchcand, SCIP_EVENTQUEUE *eventqueue, SCIP_CLIQUETABLE *cliquetable, SCIP_Bool *success)
static SCIP_RETCODE	conflictAnalyzeBoundexceedingLP (SCIP_CONFLICT *conflict, SCIP_CONFLICTSTORE *conflictstore, BMS_BLKMEM *blkmem, SCIP_SET *set, SCIP_STAT *stat, SCIP_PROB *transprob, SCIP_PROB *origprob, SCIP_TREE *tree, SCIP_REOPT *reopt, SCIP_LP *lp, SCIP_BRANCHCAND *branchcand, SCIP_EVENTQUEUE *eventqueue, SCIP_CLIQUETABLE *cliquetable, SCIP_Bool *success)
SCIP_RETCODE	SCIPconflictAnalyzeLP (SCIP_CONFLICT *conflict, SCIP_CONFLICTSTORE *conflictstore, BMS_BLKMEM *blkmem, SCIP_SET *set, SCIP_STAT *stat, SCIP_PROB *transprob, SCIP_PROB *origprob, SCIP_TREE *tree, SCIP_REOPT *reopt, SCIP_LP *lp, SCIP_BRANCHCAND *branchcand, SCIP_EVENTQUEUE *eventqueue, SCIP_CLIQUETABLE *cliquetable, SCIP_Bool *success)
SCIP_Real	SCIPconflictGetInfeasibleLPTime (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNInfeasibleLPCalls (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNInfeasibleLPSuccess (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNInfeasibleLPConflictConss (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNInfeasibleLPConflictLiterals (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNInfeasibleLPReconvergenceConss (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNInfeasibleLPReconvergenceLiterals (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNInfeasibleLPIterations (SCIP_CONFLICT *conflict)
SCIP_Real	SCIPconflictGetBoundexceedingLPTime (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNBoundexceedingLPCalls (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNBoundexceedingLPSuccess (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNBoundexceedingLPConflictConss (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNBoundexceedingLPConflictLiterals (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNBoundexceedingLPReconvergenceConss (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNBoundexceedingLPReconvergenceLiterals (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNBoundexceedingLPIterations (SCIP_CONFLICT *conflict)
SCIP_RETCODE	SCIPconflictAnalyzeStrongbranch (SCIP_CONFLICT *conflict, SCIP_CONFLICTSTORE *conflictstore, BMS_BLKMEM *blkmem, SCIP_SET *set, SCIP_STAT *stat, SCIP_PROB *transprob, SCIP_PROB *origprob, SCIP_TREE *tree, SCIP_REOPT *reopt, SCIP_LP *lp, SCIP_BRANCHCAND *branchcand, SCIP_EVENTQUEUE *eventqueue, SCIP_CLIQUETABLE *cliquetable, SCIP_COL *col, SCIP_Bool *downconflict, SCIP_Bool *upconflict)
SCIP_Real	SCIPconflictGetStrongbranchTime (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNDualproofsInfSuccess (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNDualproofsInfGlobal (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNDualproofsInfLocal (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNDualproofsInfNonzeros (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNDualproofsBndSuccess (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNDualproofsBndGlobal (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNDualproofsBndLocal (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNDualproofsBndNonzeros (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNStrongbranchCalls (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNStrongbranchSuccess (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNStrongbranchConflictConss (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNStrongbranchConflictLiterals (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNStrongbranchReconvergenceConss (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNStrongbranchReconvergenceLiterals (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNStrongbranchIterations (SCIP_CONFLICT *conflict)
SCIP_RETCODE	SCIPconflictAnalyzePseudo (SCIP_CONFLICT *conflict, BMS_BLKMEM *blkmem, SCIP_SET *set, SCIP_STAT *stat, SCIP_PROB *transprob, SCIP_PROB *origprob, SCIP_TREE *tree, SCIP_REOPT *reopt, SCIP_LP *lp, SCIP_BRANCHCAND *branchcand, SCIP_EVENTQUEUE *eventqueue, SCIP_CLIQUETABLE *cliquetable, SCIP_Bool *success)
SCIP_Real	SCIPconflictGetPseudoTime (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNPseudoCalls (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNPseudoSuccess (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNPseudoConflictConss (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNPseudoConflictLiterals (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNPseudoReconvergenceConss (SCIP_CONFLICT *conflict)
SCIP_Longint	SCIPconflictGetNPseudoReconvergenceLiterals (SCIP_CONFLICT *conflict)
void	SCIPconflictEnableOrDisableClocks (SCIP_CONFLICT *conflict, SCIP_Bool enable)

Macro Definition Documentation

BOUNDSWITCH

#define BOUNDSWITCH   0.51

threshold for bound switching - see cuts.c

Definition at line 163 of file conflict.c.

Referenced by separateAlternativeProofs().

POSTPROCESS

#define POSTPROCESS   FALSE

apply postprocessing to the cut - see cuts.c

Definition at line 164 of file conflict.c.

Referenced by separateAlternativeProofs().

USEVBDS

#define USEVBDS   FALSE

use variable bounds - see cuts.c

Definition at line 165 of file conflict.c.

Referenced by separateAlternativeProofs().

ALLOWLOCAL

#define ALLOWLOCAL   FALSE

allow to generate local cuts - see cuts.

Definition at line 166 of file conflict.c.

Referenced by separateAlternativeProofs().

MINFRAC

#define MINFRAC   0.05

minimal fractionality of floor(rhs) - see cuts.c

Definition at line 167 of file conflict.c.

Referenced by separateAlternativeProofs().

MAXFRAC

#define MAXFRAC   0.999

maximal fractionality of floor(rhs) - see cuts.c

Definition at line 168 of file conflict.c.

Referenced by separateAlternativeProofs().

NUMSTOP

#define NUMSTOP   9007199254740992.0

Definition at line 6379 of file conflict.c.

Referenced by getDualProof(), and getFarkasProof().

debugPrintViolationInfo

#define debugPrintViolationInfo

(

...

)

Definition at line 7336 of file conflict.c.

Referenced by getDualProof(), and tightenDualproof().

Function Documentation

SCIP_DECL_PARAMCHGD()

static SCIP_DECL_PARAMCHGD ( paramChgdConflicthdlrPriority  )

static

method to call, when the priority of a conflict handler was changed

Definition at line 366 of file conflict.c.

References NULL, SCIP_CALL, SCIP_OKAY, SCIPparamGetData(), SCIPparamGetInt(), and SCIPsetConflicthdlrPriority().

SCIPconflicthdlrCopyInclude()

SCIP_RETCODE SCIPconflicthdlrCopyInclude	(	SCIP_CONFLICTHDLR *	conflicthdlr,
		SCIP_SET *	set
	)

copies the given conflict handler to a new scip

Parameters

conflicthdlr	conflict handler
set	SCIP_SET of SCIP to copy to

Definition at line 380 of file conflict.c.

References NULL, SCIP_CALL, SCIP_OKAY, SCIPconflicthdlrGetName(), and SCIPsetDebugMsg.

Referenced by SCIPsetCopyPlugins().

doConflicthdlrCreate()

static SCIP_RETCODE doConflicthdlrCreate ( SCIP_CONFLICTHDLR **  conflicthdlr, SCIP_SET *  set, SCIP_MESSAGEHDLR *  messagehdlr, BMS_BLKMEM *  blkmem, const char *  name, const char *  desc, int  priority, SCIP_DECL_CONFLICTCOPY((*conflictcopy))  , SCIP_DECL_CONFLICTFREE((*conflictfree))  , SCIP_DECL_CONFLICTINIT((*conflictinit))  , SCIP_DECL_CONFLICTEXIT((*conflictexit))  , SCIP_DECL_CONFLICTINITSOL((*conflictinitsol))  , SCIP_DECL_CONFLICTEXITSOL((*conflictexitsol))  , SCIP_DECL_CONFLICTEXEC((*conflictexec))  , SCIP_CONFLICTHDLRDATA *  conflicthdlrdata  )

static

internal method for creating a conflict handler

Parameters

conflicthdlr	pointer to conflict handler data structure
set	global SCIP settings
messagehdlr	message handler
blkmem	block memory for parameter settings
name	name of conflict handler
desc	description of conflict handler
priority	priority of the conflict handler
conflicthdlrdata	conflict handler data

Definition at line 400 of file conflict.c.

References BMSallocMemory, BMSclearMemory, BMSduplicateMemoryArray, FALSE, NULL, paramname, SCIP_ALLOC, SCIP_CALL, SCIP_CLOCKTYPE_DEFAULT, SCIP_MAXSTRLEN, SCIP_OKAY, SCIPclockCreate(), SCIPsetAddIntParam(), SCIPsnprintf(), and TRUE.

Referenced by SCIPconflicthdlrCreate().

SCIPconflicthdlrCreate()

SCIP_RETCODE SCIPconflicthdlrCreate	(	SCIP_CONFLICTHDLR **	conflicthdlr,
		SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		BMS_BLKMEM *	blkmem,
		const char *	name,
		const char *	desc,
		int	priority,
		SCIP_DECL_CONFLICTCOPY((*conflictcopy))	,
		SCIP_DECL_CONFLICTFREE((*conflictfree))	,
		SCIP_DECL_CONFLICTINIT((*conflictinit))	,
		SCIP_DECL_CONFLICTEXIT((*conflictexit))	,
		SCIP_DECL_CONFLICTINITSOL((*conflictinitsol))	,
		SCIP_DECL_CONFLICTEXITSOL((*conflictexitsol))	,
		SCIP_DECL_CONFLICTEXEC((*conflictexec))	,
		SCIP_CONFLICTHDLRDATA *	conflicthdlrdata
	)

creates a conflict handler

Parameters

conflicthdlr	pointer to conflict handler data structure
set	global SCIP settings
messagehdlr	message handler
blkmem	block memory for parameter settings
name	name of conflict handler
desc	description of conflict handler
priority	priority of the conflict handler
conflicthdlrdata	conflict handler data

Definition at line 454 of file conflict.c.

References doConflicthdlrCreate(), NULL, SCIP_CALL_FINALLY, SCIP_OKAY, and SCIPconflicthdlrFree().

Referenced by SCIPincludeConflicthdlr(), and SCIPincludeConflicthdlrBasic().

SCIPconflicthdlrFree()

SCIP_RETCODE SCIPconflicthdlrFree	(	SCIP_CONFLICTHDLR **	conflicthdlr,
		SCIP_SET *	set
	)

calls destructor and frees memory of conflict handler

Parameters

conflicthdlr	pointer to conflict handler data structure
set	global SCIP settings

Definition at line 485 of file conflict.c.

References BMSfreeMemory, BMSfreeMemoryArrayNull, NULL, SCIP_CALL, SCIP_OKAY, and SCIPclockFree().

Referenced by SCIPconflicthdlrCreate().

SCIPconflicthdlrInit()

SCIP_RETCODE SCIPconflicthdlrInit	(	SCIP_CONFLICTHDLR *	conflicthdlr,
		SCIP_SET *	set
	)

calls initialization method of conflict handler

Parameters

conflicthdlr	conflict handler
set	global SCIP settings

Definition at line 513 of file conflict.c.

References SCIP_Conflicthdlr::conflicttime, SCIP_Conflicthdlr::initialized, SCIP_Conflicthdlr::name, NULL, SCIP_CALL, SCIP_INVALIDCALL, SCIP_OKAY, SCIPclockReset(), SCIPclockStart(), SCIPclockStop(), SCIPerrorMessage, SCIP_Conflicthdlr::setuptime, and TRUE.

Referenced by SCIPsetSetPriorityNlpi().

SCIPconflicthdlrExit()

SCIP_RETCODE SCIPconflicthdlrExit	(	SCIP_CONFLICTHDLR *	conflicthdlr,
		SCIP_SET *	set
	)

calls exit method of conflict handler

Parameters

conflicthdlr	conflict handler
set	global SCIP settings

Definition at line 550 of file conflict.c.

References FALSE, SCIP_Conflicthdlr::initialized, SCIP_Conflicthdlr::name, NULL, SCIP_CALL, SCIP_INVALIDCALL, SCIP_OKAY, SCIPclockStart(), SCIPclockStop(), SCIPerrorMessage, and SCIP_Conflicthdlr::setuptime.

Referenced by SCIPsetInitPlugins().

SCIPconflicthdlrInitsol()

SCIP_RETCODE SCIPconflicthdlrInitsol	(	SCIP_CONFLICTHDLR *	conflicthdlr,
		SCIP_SET *	set
	)

informs conflict handler that the branch and bound process is being started

Parameters

conflicthdlr	conflict handler
set	global SCIP settings

Definition at line 581 of file conflict.c.

References NULL, SCIP_CALL, SCIP_OKAY, SCIPclockStart(), SCIPclockStop(), and SCIP_Conflicthdlr::setuptime.

Referenced by SCIPsetExitprePlugins().

SCIPconflicthdlrExitsol()

SCIP_RETCODE SCIPconflicthdlrExitsol	(	SCIP_CONFLICTHDLR *	conflicthdlr,
		SCIP_SET *	set
	)

informs conflict handler that the branch and bound process data is being freed

Parameters

conflicthdlr	conflict handler
set	global SCIP settings

Definition at line 605 of file conflict.c.

References NULL, SCIP_CALL, SCIP_OKAY, SCIPclockStart(), SCIPclockStop(), and SCIP_Conflicthdlr::setuptime.

Referenced by SCIPsetInitsolPlugins().

SCIPconflicthdlrExec()

SCIP_RETCODE SCIPconflicthdlrExec	(	SCIP_CONFLICTHDLR *	conflicthdlr,
		SCIP_SET *	set,
		SCIP_NODE *	node,
		SCIP_NODE *	validnode,
		SCIP_BDCHGINFO **	bdchginfos,
		SCIP_Real *	relaxedbds,
		int	nbdchginfos,
		SCIP_CONFTYPE	conftype,
		SCIP_Bool	usescutoffbound,
		SCIP_Bool	resolved,
		SCIP_RESULT *	result
	)

calls execution method of conflict handler

Parameters

conflicthdlr	conflict handler
set	global SCIP settings
node	node to add conflict constraint to
validnode	node at which the constraint is valid
bdchginfos	bound change resembling the conflict set
relaxedbds	array with relaxed bounds which are efficient to create a valid conflict
nbdchginfos	number of bound changes in the conflict set
conftype	type of the conflict
usescutoffbound	depends the conflict on the cutoff bound?
resolved	was the conflict set already used to create a constraint?
result	pointer to store the result of the callback method

Definition at line 629 of file conflict.c.

References SCIP_Conflicthdlr::conflicttime, SCIP_Conflicthdlr::name, NULL, SCIP_CALL, SCIP_CONSADDED, SCIP_DIDNOTFIND, SCIP_DIDNOTRUN, SCIP_INVALIDRESULT, SCIP_OKAY, SCIPclockStart(), SCIPclockStop(), SCIPerrorMessage, and SCIPnodeGetDepth().

Referenced by conflictAddConflictCons().

SCIPconflicthdlrSetCopy()

void SCIPconflicthdlrSetCopy	(	SCIP_CONFLICTHDLR *	conflicthdlr,
		SCIP_DECL_CONFLICTCOPY((*conflictcopy))
	)

set copy method of conflict handler

Parameters

conflicthdlr

conflict handler

Definition at line 697 of file conflict.c.

References NULL.

Referenced by SCIPsetConflicthdlrCopy().

SCIPconflicthdlrSetFree()

void SCIPconflicthdlrSetFree	(	SCIP_CONFLICTHDLR *	conflicthdlr,
		SCIP_DECL_CONFLICTFREE((*conflictfree))
	)

set destructor of conflict handler

Parameters

conflicthdlr

conflict handler

Definition at line 708 of file conflict.c.

References NULL.

Referenced by SCIPsetConflicthdlrFree().

SCIPconflicthdlrSetInit()

void SCIPconflicthdlrSetInit	(	SCIP_CONFLICTHDLR *	conflicthdlr,
		SCIP_DECL_CONFLICTINIT((*conflictinit))
	)

set initialization method of conflict handler

Parameters

conflicthdlr

conflict handler

Definition at line 719 of file conflict.c.

References NULL.

Referenced by SCIPsetConflicthdlrInit().

SCIPconflicthdlrSetExit()

void SCIPconflicthdlrSetExit	(	SCIP_CONFLICTHDLR *	conflicthdlr,
		SCIP_DECL_CONFLICTEXIT((*conflictexit))
	)

set deinitialization method of conflict handler

Parameters

conflicthdlr

conflict handler

Definition at line 730 of file conflict.c.

References NULL.

Referenced by SCIPsetConflicthdlrExit().

SCIPconflicthdlrSetInitsol()

void SCIPconflicthdlrSetInitsol	(	SCIP_CONFLICTHDLR *	conflicthdlr,
		SCIP_DECL_CONFLICTINITSOL((*conflictinitsol))
	)

set solving process initialization method of conflict handler

Parameters

conflicthdlr

conflict handler

Definition at line 741 of file conflict.c.

References NULL.

Referenced by SCIPsetConflicthdlrInitsol().

SCIPconflicthdlrSetExitsol()

void SCIPconflicthdlrSetExitsol	(	SCIP_CONFLICTHDLR *	conflicthdlr,
		SCIP_DECL_CONFLICTEXITSOL((*conflictexitsol))
	)

set solving process deinitialization method of conflict handler

Parameters

conflicthdlr

conflict handler

Definition at line 752 of file conflict.c.

References NULL.

Referenced by SCIPsetConflicthdlrExitsol().

SCIPconflicthdlrSetPriority()

void SCIPconflicthdlrSetPriority	(	SCIP_CONFLICTHDLR *	conflicthdlr,
		SCIP_SET *	set,
		int	priority
	)

sets priority of conflict handler

Parameters

conflicthdlr	conflict handler
set	global SCIP settings
priority	new priority of the conflict handler

Definition at line 793 of file conflict.c.

References FALSE, NULL, and SCIP_Conflicthdlr::priority.

Referenced by SCIPsetConflicthdlrPriority().

SCIPconflicthdlrEnableOrDisableClocks()

void SCIPconflicthdlrEnableOrDisableClocks	(	SCIP_CONFLICTHDLR *	conflicthdlr,
		SCIP_Bool	enable
	)

enables or disables all clocks of conflicthdlr, depending on the value of the flag

Parameters

conflicthdlr	the conflict handler for which all clocks should be enabled or disabled
enable	should the clocks of the conflict handler be enabled?

Definition at line 817 of file conflict.c.

References SCIP_Conflicthdlr::conflicttime, NULL, SCIPclockEnableOrDisable(), and SCIP_Conflicthdlr::setuptime.

lpbdchgsCreate()

static SCIP_RETCODE lpbdchgsCreate ( SCIP_LPBDCHGS **  lpbdchgs, SCIP_SET *  set, int  ncols  )

static

create conflict LP bound change data structure

Parameters

lpbdchgs	pointer to store the conflict LP bound change data structure
set	global SCIP settings
ncols	number of columns

Definition at line 855 of file conflict.c.

References BMSclearMemoryArray, SCIP_CALL, SCIP_OKAY, SCIPsetAllocBuffer, and SCIPsetAllocBufferArray.

Referenced by runBoundHeuristic().

lpbdchgsReset()

static void lpbdchgsReset ( SCIP_LPBDCHGS *  lpbdchgs, int  ncols  )

static

reset conflict LP bound change data structure

Parameters

lpbdchgs	conflict LP bound change data structure
ncols	number of columns

Definition at line 877 of file conflict.c.

References BMSclearMemoryArray, SCIP_LPBdChgs::nbdchgs, NULL, and SCIP_LPBdChgs::usedcols.

Referenced by runBoundHeuristic().

lpbdchgsFree()

static void lpbdchgsFree ( SCIP_LPBDCHGS **  lpbdchgs, SCIP_SET *  set  )

static

free conflict LP bound change data structure

Parameters

lpbdchgs	pointer to store the conflict LP bound change data structure
set	global SCIP settings

Definition at line 890 of file conflict.c.

References SCIPsetFreeBuffer, and SCIPsetFreeBufferArray.

Referenced by runBoundHeuristic().

varGetChar()

static char varGetChar ( SCIP_VAR *  var )

static

return the char associated with the type of the variable

Parameters

var

variable

Definition at line 910 of file conflict.c.

References SCIP_VARTYPE_BINARY, SCIP_VARTYPE_INTEGER, SCIPvarGetType(), and SCIPvarIsIntegral().

Referenced by tightenSingleVar().

proofsetClear()

static void proofsetClear ( SCIP_PROOFSET *  proofset )

static

resets the data structure of a proofset

Parameters

proofset

proof set

Definition at line 923 of file conflict.c.

References SCIP_ProofSet::conflicttype, SCIP_ProofSet::nnz, NULL, SCIP_ProofSet::rhs, SCIP_CONFTYPE_UNKNOWN, and SCIP_ProofSet::validdepth.

Referenced by conflictFlushProofset(), and tightenDualproof().

proofsetCreate()

static SCIP_RETCODE proofsetCreate ( SCIP_PROOFSET **  proofset, BMS_BLKMEM *  blkmem  )

static

creates a proofset

Parameters

proofset	proof set
blkmem	block memory of transformed problem

Definition at line 937 of file conflict.c.

References BMSallocBlockMemory, NULL, SCIP_ALLOC, SCIP_CONFTYPE_UNKNOWN, and SCIP_OKAY.

Referenced by conflictInitProofset(), separateAlternativeProofs(), and tightenDualproof().

conflictInitProofset()

static SCIP_RETCODE conflictInitProofset ( SCIP_CONFLICT *  conflict, BMS_BLKMEM *  blkmem  )

static

creates and clears the proofset

Parameters

conflict	conflict analysis data
blkmem	block memory of transformed problem

Definition at line 958 of file conflict.c.

References NULL, SCIP_Conflict::proofset, proofsetCreate(), SCIP_CALL, and SCIP_OKAY.

Referenced by SCIPconflictCreate().

proofsetFree()

static void proofsetFree ( SCIP_PROOFSET **  proofset, BMS_BLKMEM *  blkmem  )

static

frees a proofset

Parameters

proofset	proof set
blkmem	block memory

Definition at line 973 of file conflict.c.

References BMSfreeBlockMemory, BMSfreeBlockMemoryArrayNull, SCIP_ProofSet::inds, SCIP_ProofSet::nnz, NULL, SCIP_ProofSet::rhs, SCIPprobGetVars(), SCIPvarGetName(), and SCIP_ProofSet::vals.

Referenced by conflictFlushProofset(), SCIPconflictFree(), separateAlternativeProofs(), and tightenDualproof().

proofsetGetInds()

static int* proofsetGetInds ( SCIP_PROOFSET *  proofset )

static

return the indices of variables in the proofset

Parameters

proofset

proof set

Definition at line 1013 of file conflict.c.

References SCIP_ProofSet::inds, and NULL.

Referenced by conflictFlushProofset(), createAndAddProofcons(), and tightenDualproof().

proofsetGetVals()

static SCIP_Real* proofsetGetVals ( SCIP_PROOFSET *  proofset )

static

return coefficient of variable in the proofset with given probindex

Parameters

proofset

proof set

Definition at line 1024 of file conflict.c.

References NULL, and SCIP_ProofSet::vals.

Referenced by conflictFlushProofset(), createAndAddProofcons(), and tightenDualproof().

proofsetGetRhs()

static SCIP_Real proofsetGetRhs ( SCIP_PROOFSET *  proofset )

static

return the right-hand side if a proofset

Parameters

proofset

proof set

Definition at line 1035 of file conflict.c.

References NULL, and SCIP_ProofSet::rhs.

Referenced by conflictFlushProofset(), createAndAddProofcons(), and tightenCoefficients().

proofsetGetNVars()

static int proofsetGetNVars ( SCIP_PROOFSET *  proofset )

static

returns the number of variables in the proofset

Parameters

proofset

proof set

Definition at line 1046 of file conflict.c.

References SCIP_ProofSet::nnz, and NULL.

Referenced by conflictAnalyzeLP(), conflictFlushProofset(), createAndAddProofcons(), tightenCoefficients(), and tightenDualproof().

proofsetGetConftype()

static SCIP_CONFTYPE proofsetGetConftype ( SCIP_PROOFSET *  proofset )

static

returns the number of variables in the proofset

Parameters

proofset

proof set

Definition at line 1057 of file conflict.c.

References SCIP_ProofSet::conflicttype, and NULL.

Referenced by conflictFlushProofset(), and createAndAddProofcons().

proofsetAddSparseData()

static SCIP_RETCODE proofsetAddSparseData ( SCIP_PROOFSET *  proofset, BMS_BLKMEM *  blkmem, SCIP_Real *  vals, int *  inds, int  nnz, SCIP_Real  rhs  )

static

adds given data as aggregation row to the proofset

Parameters

proofset	proof set
blkmem	block memory
vals	variable coefficients
inds	variable array
nnz	size of variable and coefficient array
rhs	right-hand side of the aggregation row

Definition at line 1068 of file conflict.c.

References BMSduplicateBlockMemoryArray, BMSreallocBlockMemoryArray, SCIP_ProofSet::inds, SCIP_ProofSet::nnz, NULL, SCIP_ProofSet::rhs, SCIP_ALLOC, SCIP_OKAY, SCIP_ProofSet::size, and SCIP_ProofSet::vals.

Referenced by proofsetAddAggrrow(), and separateAlternativeProofs().

proofsetAddAggrrow()

static SCIP_RETCODE proofsetAddAggrrow ( SCIP_PROOFSET *  proofset, SCIP_SET *  set, BMS_BLKMEM *  blkmem, SCIP_AGGRROW *  aggrrow  )

static

adds an aggregation row to the proofset

Parameters

proofset	proof set
set	global SCIP settings
blkmem	block memory
aggrrow	aggregation row to add

Definition at line 1119 of file conflict.c.

References NULL, proofsetAddSparseData(), SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIPaggrRowGetInds(), SCIPaggrRowGetNNz(), SCIPaggrRowGetProbvarValue(), SCIPaggrRowGetRhs(), SCIPsetAllocBufferArray, and SCIPsetFreeBufferArray.

Referenced by tightenDualproof().

proofsetCancelVarWithBound()

static void proofsetCancelVarWithBound ( SCIP_PROOFSET *  proofset, SCIP_SET *  set, SCIP_VAR *  var, int  pos, SCIP_Bool *  valid  )

static

Removes a given variable var from position pos from the proofset and updates the right-hand side according to sign of the coefficient, i.e., rhs -= coef * bound, where bound = lb if coef >= 0 and bound = ub, otherwise.

Note

: The list of non-zero indices and coefficients will be updated by swapping the last non-zero index to pos.

Definition at line 1160 of file conflict.c.

References FALSE, SCIP_ProofSet::inds, SCIP_ProofSet::nnz, NULL, SCIP_ProofSet::rhs, SCIPsetIsInfinity(), SCIPvarGetLbGlobal(), SCIPvarGetUbGlobal(), TRUE, and SCIP_ProofSet::vals.

Referenced by tightenDualproof().

conflictEnsureTmpbdchginfosMem()

static SCIP_RETCODE conflictEnsureTmpbdchginfosMem ( SCIP_CONFLICT *  conflict, SCIP_SET *  set, int  num  )

static

resizes the array of the temporary bound change informations to be able to store at least num bound change entries

Parameters

conflict	conflict analysis data
set	global SCIP settings
num	minimal number of slots in arrays

Definition at line 1204 of file conflict.c.

References BMSreallocMemoryArray, NULL, SCIP_ALLOC, SCIP_OKAY, SCIPsetCalcMemGrowSize(), SCIP_Conflict::tmpbdchginfos, and SCIP_Conflict::tmpbdchginfossize.

Referenced by conflictCreateTmpBdchginfo().

conflictCreateTmpBdchginfo()

static SCIP_RETCODE conflictCreateTmpBdchginfo ( SCIP_CONFLICT *  conflict, BMS_BLKMEM *  blkmem, SCIP_SET *  set, SCIP_VAR *  var, SCIP_BOUNDTYPE  boundtype, SCIP_Real  oldbound, SCIP_Real  newbound, SCIP_BDCHGINFO **  bdchginfo  )

static

creates a temporary bound change information object that is destroyed after the conflict sets are flushed

Parameters

conflict	conflict analysis data
blkmem	block memory
set	global SCIP settings
var	active variable that changed the bounds
boundtype	type of bound for var: lower or upper bound
oldbound	old value for bound
newbound	new value for bound
bdchginfo	pointer to store bound change information

Definition at line 1228 of file conflict.c.

References conflictEnsureTmpbdchginfosMem(), SCIP_Conflict::ntmpbdchginfos, NULL, SCIP_CALL, SCIP_OKAY, SCIPbdchginfoCreate(), and SCIP_Conflict::tmpbdchginfos.

Referenced by conflictAnalyzeRemainingBdchgs(), and conflictCreateReconvergenceConss().

conflictFreeTmpBdchginfos()

static void conflictFreeTmpBdchginfos ( SCIP_CONFLICT *  conflict, BMS_BLKMEM *  blkmem  )

static

frees all temporarily created bound change information data

Parameters

conflict	conflict analysis data
blkmem	block memory

Definition at line 1252 of file conflict.c.

References SCIP_Conflict::ntmpbdchginfos, NULL, SCIPbdchginfoFree(), and SCIP_Conflict::tmpbdchginfos.

Referenced by SCIPconflictFlushConss().

conflictsetClear()

static void conflictsetClear ( SCIP_CONFLICTSET *  conflictset )

static

clears the given conflict set

Parameters

conflictset

conflict set

Definition at line 1268 of file conflict.c.

References SCIP_ConflictSet::conflictdepth, SCIP_ConflictSet::conflicttype, FALSE, SCIP_ConflictSet::insertdepth, SCIP_ConflictSet::nbdchginfos, NULL, SCIP_ConflictSet::repropagate, SCIP_ConflictSet::repropdepth, SCIP_CONFTYPE_UNKNOWN, TRUE, SCIP_ConflictSet::usescutoffbound, and SCIP_ConflictSet::validdepth.

Referenced by conflictClear(), and conflictsetCreate().

conflictsetCreate()

static SCIP_RETCODE conflictsetCreate ( SCIP_CONFLICTSET **  conflictset, BMS_BLKMEM *  blkmem  )

static

creates an empty conflict set

Parameters

conflictset	pointer to store the conflict set
blkmem	block memory of transformed problem

Definition at line 1286 of file conflict.c.

References BMSallocBlockMemory, conflictsetClear(), NULL, SCIP_ALLOC, and SCIP_OKAY.

Referenced by SCIPconflictCreate().

conflictsetCopy()

static SCIP_RETCODE conflictsetCopy ( SCIP_CONFLICTSET **  targetconflictset, BMS_BLKMEM *  blkmem, SCIP_CONFLICTSET *  sourceconflictset, int  nadditionalelems  )

static

creates a copy of the given conflict set, allocating an additional amount of memory

Parameters

targetconflictset	pointer to store the conflict set
blkmem	block memory of transformed problem
sourceconflictset	source conflict set
nadditionalelems	number of additional elements to allocate memory for

Definition at line 1306 of file conflict.c.

References SCIP_ConflictSet::bdchginfos, BMSallocBlockMemory, BMSallocBlockMemoryArray, BMScopyMemoryArray, SCIP_ConflictSet::conflictdepth, SCIP_ConflictSet::conflicttype, SCIP_ConflictSet::insertdepth, SCIP_ConflictSet::nbdchginfos, NULL, SCIP_ConflictSet::relaxedbds, SCIP_ConflictSet::repropdepth, SCIP_ALLOC, SCIP_OKAY, SCIP_ConflictSet::sortvals, SCIP_ConflictSet::usescutoffbound, and SCIP_ConflictSet::validdepth.

Referenced by conflictAddConflictset().

conflictsetFree()

static void conflictsetFree ( SCIP_CONFLICTSET **  conflictset, BMS_BLKMEM *  blkmem  )

static

frees a conflict set

Parameters

conflictset	pointer to the conflict set
blkmem	block memory of transformed problem

Definition at line 1342 of file conflict.c.

References BMSfreeBlockMemory, BMSfreeBlockMemoryArrayNull, and NULL.

Referenced by conflictAddConflictset(), conflictInsertConflictset(), SCIPconflictFlushConss(), and SCIPconflictFree().

conflictsetEnsureBdchginfosMem()

static SCIP_RETCODE conflictsetEnsureBdchginfosMem ( SCIP_CONFLICTSET *  conflictset, BMS_BLKMEM *  blkmem, SCIP_SET *  set, int  num  )

static

resizes the arrays of the conflict set to be able to store at least num bound change entries

Parameters

conflictset	conflict set
blkmem	block memory of transformed problem
set	global SCIP settings
num	minimal number of slots in arrays

Definition at line 1358 of file conflict.c.

References SCIP_ConflictSet::bdchginfos, SCIP_ConflictSet::bdchginfossize, BMSreallocBlockMemoryArray, NULL, SCIP_ConflictSet::relaxedbds, SCIP_ALLOC, SCIP_OKAY, SCIPsetCalcMemGrowSize(), and SCIP_ConflictSet::sortvals.

Referenced by conflictsetAddBound(), and conflictsetAddBounds().

conflictsetCalcScore()

static SCIP_Real conflictsetCalcScore ( SCIP_CONFLICTSET *  conflictset, SCIP_SET *  set  )

static

calculates the score of the conflict set

the score is weighted sum of number of bound changes, repropagation depth, and valid depth

Parameters

conflictset	conflict set
set	global SCIP settings

Definition at line 1388 of file conflict.c.

References SCIP_ConflictSet::nbdchginfos, NULL, SCIP_ConflictSet::repropdepth, and SCIP_ConflictSet::validdepth.

Referenced by conflictInsertConflictset().

calcBdchgScore()

static SCIP_Real calcBdchgScore ( SCIP_Real  prooflhs, SCIP_Real  proofact, SCIP_Real  proofactdelta, SCIP_Real  proofcoef, int  depth, int  currentdepth, SCIP_VAR *  var, SCIP_SET *  set  )

static

calculates the score of a bound change within a conflict

Parameters

prooflhs	lhs of proof constraint
proofact	activity of the proof constraint
proofactdelta	activity change
proofcoef	coefficient in proof constraint
depth	bound change depth
currentdepth	current depth
var	variable corresponding to bound change
set	global SCIP settings

Definition at line 1402 of file conflict.c.

References MAX, NULL, SCIP_LOCKTYPE_MODEL, SCIP_Real, SCIP_VARSTATUS_COLUMN, SCIPcolGetNNonz(), SCIPvarGetCol(), SCIPvarGetNLocksDownType(), SCIPvarGetNLocksUpType(), and SCIPvarGetStatus().

Referenced by addCand().

bdchginfoIsInvalid()

static SCIP_Bool bdchginfoIsInvalid ( SCIP_CONFLICT *  conflict, SCIP_BDCHGINFO *  bdchginfo  )

static

check if the bound change info (which is the potential next candidate which is queued) is valid for the current conflict analysis; a bound change info can get invalid if after this one was added to the queue, a weaker bound change was added to the queue (due the bound widening idea) which immediately makes this bound change redundant; due to the priority we did not removed that bound change info since that cost O(log(n)); hence we have to skip/ignore it now

The following situations can occur before for example the bound change info (x >= 3) is potentially popped from the queue.

Postcondition: the reason why (x >= 3) was queued is that at this time point no lower bound of x was involved yet in the current conflict or the lower bound which was involved until then was stronger, e.g., (x >= 2).

1) during the time until (x >= 3) gets potentially popped no weaker lower bound was added to the queue, in that case the conflictlbcount is valid and conflictlb is 3; that is (var->conflictlbcount == conflict->count && var->conflictlb == 3)

2) a weaker bound change info gets queued (e.g., x >= 4); this bound change is popped before (x >= 3) since it has higher priority (which is the time stamp of the bound change info and (x >= 4) has to be done after (x >= 3) during propagation or branching)

a) if (x >= 4) is popped and added to the conflict set the conflictlbcount is still valid and conflictlb is at most 4; that is (var->conflictlbcount == conflict->count && var->conflictlb >= 4); it follows that any bound change info which is stronger than (x >= 4) gets ignored (for example x >= 2)

b) if (x >= 4) is popped and resolved without introducing a new lower bound on x until (x >= 3) is a potentially candidate the conflictlbcount indicates that bound change is currently not present; that is (var->conflictlbcount != conflict->count)

c) if (x >= 4) is popped and resolved and a new lower bound on x (e.g., x >= 2) is introduced until (x >= 3) is pooped, the conflictlbcount indicates that bound change is currently present; that is (var->conflictlbcount == conflict->count); however the (x >= 3) only has be explained if conflictlb matches that one; that is (var->conflictlb == bdchginfo->newbound); otherwise it redundant/invalid.

Parameters

conflict	conflict analysis data
bdchginfo	bound change information

Definition at line 1479 of file conflict.c.

References SCIP_Var::conflictlb, SCIP_Var::conflictlbcount, SCIP_Var::conflictub, SCIP_Var::conflictubcount, SCIP_Conflict::count, FALSE, NULL, SCIP_BOUNDTYPE_LOWER, SCIP_BOUNDTYPE_UPPER, SCIPbdchginfoGetBoundtype(), SCIPbdchginfoGetNewbound(), SCIPbdchginfoGetVar(), SCIPvarIsBinary(), and TRUE.

Referenced by conflictFirstCand(), conflictRemoveCand(), conflictResolveBound(), and conflictsetAddBounds().

conflictsetAddBound()

static SCIP_RETCODE conflictsetAddBound ( SCIP_CONFLICTSET *  conflictset, BMS_BLKMEM *  blkmem, SCIP_SET *  set, SCIP_BDCHGINFO *  bdchginfo, SCIP_Real  relaxedbd  )

static

adds a bound change to a conflict set

Parameters

conflictset	conflict set
blkmem	block memory of transformed problem
set	global SCIP settings
bdchginfo	bound change to add to the conflict set
relaxedbd	relaxed bound

Definition at line 1522 of file conflict.c.

References SCIP_ConflictSet::bdchginfos, conflictsetEnsureBdchginfosMem(), MAX, SCIP_ConflictSet::nbdchginfos, NULL, SCIP_ConflictSet::relaxedbds, SCIP_BOUNDTYPE_LOWER, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIPbdchginfoGetBoundtype(), SCIPbdchginfoGetVar(), SCIPbdchginfoIsTighter(), SCIPsortedvecDelPosIntPtrReal(), SCIPsortedvecInsertIntPtrReal(), SCIPvarGetIndex(), and SCIP_ConflictSet::sortvals.

Referenced by conflictAddConflictBound(), and conflictsetAddBounds().

conflictsetAddBounds()

static SCIP_RETCODE conflictsetAddBounds ( SCIP_CONFLICT *  conflict, SCIP_CONFLICTSET *  conflictset, BMS_BLKMEM *  blkmem, SCIP_SET *  set, SCIP_BDCHGINFO **  bdchginfos, int  nbdchginfos  )

static

adds given bound changes to a conflict set

Parameters

conflict	conflict analysis data
conflictset	conflict set
blkmem	block memory of transformed problem
set	global SCIP settings
bdchginfos	bound changes to add to the conflict set
nbdchginfos	number of bound changes to add

Definition at line 1592 of file conflict.c.

References bdchginfoIsInvalid(), SCIP_ConflictSet::bdchginfos, conflictsetAddBound(), conflictsetEnsureBdchginfosMem(), FALSE, MAX, SCIP_ConflictSet::nbdchginfos, NULL, SCIP_ConflictSet::relaxedbds, SCIP_BOUNDTYPE_LOWER, SCIP_BOUNDTYPE_UPPER, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIPbdchginfoGetBoundtype(), SCIPbdchginfoGetDepth(), SCIPbdchginfoGetNewbound(), SCIPbdchginfoGetRelaxedBound(), SCIPbdchginfoGetVar(), SCIPbdchginfoIsTighter(), SCIPsetDebugMsg, SCIPsortIntPtrReal(), SCIPvarGetIndex(), SCIPvarGetName(), SCIP_ConflictSet::sortvals, and TRUE.

Referenced by conflictAddConflictset().

conflictsetCalcConflictDepth()

static void conflictsetCalcConflictDepth ( SCIP_CONFLICTSET *  conflictset )

static

calculates the conflict and the repropagation depths of the conflict set

Parameters

conflictset

conflict set

Definition at line 1758 of file conflict.c.

References SCIP_ConflictSet::bdchginfos, SCIP_ConflictSet::conflictdepth, SCIP_ConflictSet::insertdepth, SCIP_ConflictSet::nbdchginfos, NULL, SCIP_ConflictSet::repropdepth, SCIPbdchginfoGetDepth(), and SCIP_ConflictSet::validdepth.

Referenced by conflictInsertConflictset().

conflictsetCalcInsertDepth()

static SCIP_RETCODE conflictsetCalcInsertDepth ( SCIP_CONFLICTSET *  conflictset, SCIP_SET *  set, SCIP_TREE *  tree  )

static

identifies the depth, at which the conflict set should be added:

• if the branching rule operates on variables only, and if all branching variables up to a certain depth level are member of the conflict, the conflict constraint can only be violated in the subtree of the node at that depth, because in all other nodes, at least one of these branching variables violates its conflicting bound, such that the conflict constraint is feasible
• if there is at least one branching variable in a node, we assume, that this branching was performed on variables, and that the siblings of this node are disjunct w.r.t. the branching variables' fixings
• we have to add the conflict set at least in the valid depth of the initial conflict set, so we start searching at the first branching after this depth level, i.e. validdepth+1

Parameters

conflictset	conflict set
set	global SCIP settings
tree	branch and bound tree

Definition at line 1802 of file conflict.c.

References SCIP_ConflictSet::bdchginfos, BMSclearMemoryArray, SCIP_ConflictSet::insertdepth, SCIP_ConflictSet::nbdchginfos, NULL, SCIP_Tree::pathlen, SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIPbdchginfoGetDepth(), SCIPsetAllocBufferArray, SCIPsetFreeBufferArray, SCIPtreeGetCurrentDepth(), TRUE, and SCIP_ConflictSet::validdepth.

Referenced by conflictAddConflictset().

conflictsetIsRedundant()

static SCIP_Bool conflictsetIsRedundant ( SCIP_CONFLICTSET *  conflictset1, SCIP_CONFLICTSET *  conflictset2  )

static

checks whether the first conflict set is redundant to the second one

Parameters

conflictset1	first conflict conflict set
conflictset2	second conflict conflict set

Definition at line 1849 of file conflict.c.

References SCIP_ConflictSet::bdchginfos, FALSE, SCIP_ConflictSet::nbdchginfos, NULL, SCIP_ConflictSet::relaxedbds, SCIP_BOUNDTYPE_LOWER, SCIPbdchginfoGetBoundtype(), SCIPbdchginfoGetDepth(), SCIPbdchginfoGetNewbound(), SCIPbdchginfoGetVar(), SCIPbdchginfoIsTighter(), SCIPdebugPrintf, SCIPvarGetName(), SCIP_ConflictSet::sortvals, and SCIP_ConflictSet::validdepth.

Referenced by conflictInsertConflictset().

conflictEnsureProofsetsMem()

static SCIP_RETCODE conflictEnsureProofsetsMem ( SCIP_CONFLICT *  conflict, SCIP_SET *  set, int  num  )

static

resizes proofsets array to be able to store at least num entries

Parameters

conflict	conflict analysis data
set	global SCIP settings
num	minimal number of slots in array

Definition at line 1911 of file conflict.c.

References BMSreallocMemoryArray, NULL, SCIP_Conflict::proofsets, SCIP_Conflict::proofsetssize, SCIP_ALLOC, SCIP_OKAY, and SCIPsetCalcMemGrowSize().

Referenced by conflictInsertProofset().

conflictEnsureConflictsetsMem()

static SCIP_RETCODE conflictEnsureConflictsetsMem ( SCIP_CONFLICT *  conflict, SCIP_SET *  set, int  num  )

static

resizes conflictsets array to be able to store at least num entries

Parameters

conflict	conflict analysis data
set	global SCIP settings
num	minimal number of slots in array

Definition at line 1935 of file conflict.c.

References BMSreallocMemoryArray, SCIP_Conflict::conflictsets, SCIP_Conflict::conflictsetscores, SCIP_Conflict::conflictsetssize, NULL, SCIP_ALLOC, SCIP_OKAY, and SCIPsetCalcMemGrowSize().

Referenced by conflictInsertConflictset().

conflictInsertProofset()

static SCIP_RETCODE conflictInsertProofset ( SCIP_CONFLICT *  conflict, SCIP_SET *  set, SCIP_PROOFSET *  proofset  )

static

add a proofset to the list of all proofsets

Parameters

conflict	conflict analysis data
set	global SCIP settings
proofset	proof set to add

Definition at line 1960 of file conflict.c.

References conflictEnsureProofsetsMem(), SCIP_Conflict::nproofsets, NULL, SCIP_Conflict::proofsets, SCIP_CALL, and SCIP_OKAY.

Referenced by separateAlternativeProofs(), and tightenDualproof().

conflictInsertConflictset()

static SCIP_RETCODE conflictInsertConflictset ( SCIP_CONFLICT *  conflict, BMS_BLKMEM *  blkmem, SCIP_SET *  set, SCIP_CONFLICTSET **  conflictset  )

static

inserts conflict set into sorted conflictsets array and deletes the conflict set pointer

Parameters

conflict	conflict analysis data
blkmem	block memory of transformed problem
set	global SCIP settings
conflictset	pointer to conflict set to insert

Definition at line 1980 of file conflict.c.

References conflictEnsureConflictsetsMem(), conflictsetCalcConflictDepth(), conflictsetCalcScore(), conflictsetFree(), conflictsetIsRedundant(), SCIP_Conflict::conflictsets, SCIP_Conflict::conflictsetscores, SCIP_Conflict::nconflictsets, NULL, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIPdebug, and SCIPsetDebugMsg.

Referenced by conflictAddConflictset().

conflictCalcMaxsize()

static int conflictCalcMaxsize ( SCIP_SET *  set, SCIP_PROB *  prob  )

static

calculates the maximal size of conflict sets to be used

Parameters

set	global SCIP settings
prob	problem data

Definition at line 2074 of file conflict.c.

References MAX, SCIP_Prob::ncontvars, NULL, and SCIP_Prob::nvars.

Referenced by conflictAnalyzeRemainingBdchgs(), SCIPconflictAnalyze(), and SCIPconflictFlushConss().

incVSIDS()

static SCIP_RETCODE incVSIDS ( SCIP_VAR *  var, BMS_BLKMEM *  blkmem, SCIP_SET *  set, SCIP_STAT *  stat, SCIP_BOUNDTYPE  boundtype, SCIP_Real  value, SCIP_Real  weight  )

static

increases the conflict score of the variable in the given direction

Parameters

var	problem variable
blkmem	block memory
set	global SCIP settings
stat	dynamic problem statistics
boundtype	type of bound for which the score should be increased
value	value of the bound
weight	weight of this VSIDS updates

Definition at line 2092 of file conflict.c.

References SCIP_Stat::glbhistory, SCIP_Stat::glbhistorycrun, NULL, SCIP_BOUNDTYPE_LOWER, SCIP_BRANCHDIR_DOWNWARDS, SCIP_BRANCHDIR_UPWARDS, SCIP_CALL, SCIP_OKAY, SCIPhistoryIncVSIDS(), SCIPsetIsZero(), SCIPvarIncVSIDS(), and SCIP_Stat::vsidsweight.

Referenced by conflictAddBound(), conflictAnalyzeRemainingBdchgs(), and updateStatistics().

updateStatistics()

static SCIP_RETCODE updateStatistics ( SCIP_CONFLICT *  conflict, BMS_BLKMEM *  blkmem, SCIP_SET *  set, SCIP_STAT *  stat, SCIP_CONFLICTSET *  conflictset, int  insertdepth  )

static

update conflict statistics

Parameters

conflict	conflict analysis data
blkmem	block memory
set	global SCIP settings
stat	dynamic problem statistics
conflictset	conflict set to add to the tree
insertdepth	depth level at which the conflict set should be added

Definition at line 2123 of file conflict.c.

References SCIP_ConflictSet::bdchginfos, bound, SCIP_Stat::glbhistory, SCIP_Stat::glbhistorycrun, incVSIDS(), SCIP_Conflict::nappliedglbconss, SCIP_Conflict::nappliedglbliterals, SCIP_Conflict::nappliedlocconss, SCIP_Conflict::nappliedlocliterals, SCIP_ConflictSet::nbdchginfos, NULL, SCIP_ConflictSet::relaxedbds, SCIP_BOUNDTYPE_LOWER, SCIP_BRANCHDIR_DOWNWARDS, SCIP_BRANCHDIR_UPWARDS, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIPbdchginfoGetBoundtype(), SCIPhistoryIncNActiveConflicts(), SCIPvarIncNActiveConflicts(), and SCIP_BdChgInfo::var.

Referenced by conflictAddConflictCons().

checkRedundancy()

static SCIP_Bool checkRedundancy ( SCIP_SET *  set, SCIP_CONFLICTSET *  conflictset  )

static

check conflict set for redundancy, other conflicts in the same conflict analysis could have led to global reductions an made this conflict set redundant

Parameters

set	global SCIP settings
conflictset	conflict set

Definition at line 2177 of file conflict.c.

References SCIP_ConflictSet::bdchginfos, bound, FALSE, SCIP_ConflictSet::nbdchginfos, NULL, SCIP_ConflictSet::relaxedbds, SCIP_BOUNDTYPE_LOWER, SCIP_BOUNDTYPE_UPPER, SCIP_Real, SCIP_VARTYPE_CONTINUOUS, SCIPbdchginfoGetBoundtype(), SCIPbdchginfoGetNewbound(), SCIPbdchginfoGetVar(), SCIPsetIsFeasGE(), SCIPsetIsFeasLE(), SCIPsetIsGE(), SCIPsetIsIntegral(), SCIPsetIsLE(), SCIPvarGetLbGlobal(), SCIPvarGetProbindex(), SCIPvarGetType(), SCIPvarGetUbGlobal(), and TRUE.

Referenced by detectImpliedBounds().

detectImpliedBounds()

static SCIP_RETCODE detectImpliedBounds ( SCIP_SET *  set, SCIP_PROB *  prob, SCIP_CONFLICTSET *  conflictset, int *  nbdchgs, int *  nredvars, SCIP_Bool *  redundant  )

static

find global fixings which can be derived from the new conflict set

Parameters

set	global SCIP settings
prob	transformed problem after presolve
conflictset	conflict set to add to the tree
nbdchgs	number of global deducted bound changes due to the conflict set
nredvars	number of redundant and removed variables from conflict set
redundant	did we found a global reduction on a conflict set variable, which makes this conflict redundant

Definition at line 2242 of file conflict.c.

References SCIP_ConflictSet::bdchginfos, BMSclearMemoryArray, bound, checkRedundancy(), FALSE, SCIP_ConflictSet::nbdchginfos, NULL, SCIP_ConflictSet::relaxedbds, SCIP_Bool, SCIP_BOUNDTYPE_LOWER, SCIP_BOUNDTYPE_UPPER, SCIP_CALL, SCIP_Longint, SCIP_OKAY, SCIP_Real, SCIPbdchginfoGetBoundtype(), SCIPbdchginfoGetNewbound(), SCIPbdchginfoGetVar(), SCIPboundtypeOpposite(), SCIPprobGetName(), SCIPprobIsTransformed(), SCIPsetAllocBufferArray, SCIPsetAllocCleanBufferArray, SCIPsetDebugMsg, SCIPsetDebugMsgPrint, SCIPsetFreeBufferArray, SCIPsetFreeCleanBufferArray, SCIPsetIsEQ(), SCIPsetIsFeasEQ(), SCIPsetIsFeasGT(), SCIPsetIsFeasLT(), SCIPsetIsGE(), SCIPsetIsIntegral(), SCIPsetIsLE(), SCIPsetIsZero(), SCIPshrinkDisjunctiveVarSet(), SCIPsortLongPtrRealRealBool(), SCIPvarGetLbGlobal(), SCIPvarGetName(), SCIPvarGetNCliques(), SCIPvarGetNVlbs(), SCIPvarGetNVubs(), SCIPvarGetProbindex(), SCIPvarGetUbGlobal(), SCIPvarIsBinary(), SCIPvarIsIntegral(), SCIP_ConflictSet::sortvals, and TRUE.

Referenced by conflictAddConflictCons().

tightenSingleVar()

static SCIP_RETCODE tightenSingleVar ( SCIP_CONFLICT *  conflict, SCIP_SET *  set, SCIP_STAT *  stat, SCIP_TREE *  tree, BMS_BLKMEM *  blkmem, SCIP_PROB *  origprob, SCIP_PROB *  transprob, SCIP_REOPT *  reopt, SCIP_LP *  lp, SCIP_BRANCHCAND *  branchcand, SCIP_EVENTQUEUE *  eventqueue, SCIP_CLIQUETABLE *  cliquetable, SCIP_VAR *  var, SCIP_Real  val, SCIP_Real  rhs, SCIP_CONFTYPE  prooftype, int  validdepth  )

static

tighten the bound of a singleton variable in a constraint

if the bound is contradicting with a global bound we cannot tighten the bound directly. in this case we need to create and add a constraint of size one such that propagating this constraint will enforce the infeasibility.

Parameters

conflict	conflict analysis data
set	global SCIP settings
stat	dynamic SCIP statistics
tree	tree data
blkmem	block memory
origprob	original problem
transprob	transformed problem
reopt	reoptimization data
lp	LP data
branchcand	branching candidates
eventqueue	event queue
cliquetable	clique table
var	problem variable
val	coefficient of the variable
rhs	rhs of the constraint
prooftype	type of the proof
validdepth	depth where the bound change is valid

Definition at line 2512 of file conflict.c.

References SCIP_Conflict::dualproofsbndnnonzeros, SCIP_Conflict::dualproofsinfnnonzeros, FALSE, SCIP_Conflict::nboundlpsuccess, SCIP_Conflict::ndualproofsbndglobal, SCIP_Conflict::ndualproofsbndlocal, SCIP_Conflict::ndualproofsbndsuccess, SCIP_Conflict::ndualproofsinfglobal, SCIP_Conflict::ndualproofsinflocal, SCIP_Conflict::ndualproofsinfsuccess, SCIP_Conflict::nglbchgbds, SCIP_Conflict::ninflpsuccess, SCIP_Conflict::nlocchgbds, NULL, SCIP_Tree::path, SCIP_Bool, SCIP_BOUNDTYPE_LOWER, SCIP_BOUNDTYPE_UPPER, SCIP_CALL, SCIP_CONFTYPE_ALTINFPROOF, SCIP_CONFTYPE_INFEASLP, SCIP_MAXSTRLEN, SCIP_OKAY, SCIP_Real, SCIPaddCoefLinear(), SCIPconsRelease(), SCIPcreateConsLinear(), SCIPnodeAddBoundchg(), SCIPnodeAddCons(), SCIPnodeCutoff(), SCIPnodeGetNumber(), SCIPnodePropagateAgain(), SCIPprobAddCons(), SCIPsetDebugMsg, SCIPsetFeasFloor(), SCIPsetInfinity(), SCIPsetIsGE(), SCIPsetIsGT(), SCIPsetIsIntegral(), SCIPsetIsLE(), SCIPsetIsLT(), SCIPsnprintf(), SCIPtreeGetEffectiveRootDepth(), SCIPvarAdjustBd(), SCIPvarGetLbGlobal(), SCIPvarGetLbLocal(), SCIPvarGetName(), SCIPvarGetUbGlobal(), SCIPvarGetUbLocal(), SCIPvarIsIntegral(), SCIP_Lp::strongbranching, TRUE, and varGetChar().

Referenced by conflictFlushProofset(), and propagateLongProof().

aggrRowGetMinActivity()

static SCIP_Real aggrRowGetMinActivity ( SCIP_SET *  set, SCIP_PROB *  transprob, SCIP_AGGRROW *  aggrrow, SCIP_Real *  curvarlbs, SCIP_Real *  curvarubs, SCIP_Bool *  infdelta  )

static

calculates the minimal activity of a given aggregation row

Parameters

set	global SCIP settings
transprob	transformed problem data
aggrrow	aggregation row
curvarlbs	current lower bounds of active problem variables (or NULL for global bounds)
curvarubs	current upper bounds of active problem variables (or NULL for global bounds)
infdelta	pointer to store whether at least one variable contributes with an infinite value

Definition at line 2662 of file conflict.c.

References FALSE, NULL, QUAD, QUAD_ASSIGN, QUAD_TO_DBL, REALABS, SCIP_Real, SCIPaggrRowGetInds(), SCIPaggrRowGetNNz(), SCIPaggrRowGetProbvarValue(), SCIPprobGetVars(), SCIPquadprecProdDD, SCIPquadprecSumQQ, SCIPsetInfinity(), SCIPsetIsInfinity(), SCIPvarGetLbGlobal(), SCIPvarGetProbindex(), SCIPvarGetUbGlobal(), and TRUE.

Referenced by addLocalRows(), conflictAnalyzeDualProof(), getDualProof(), getFarkasProof(), separateAlternativeProofs(), and tightenDualproof().

getMinActivity()

static SCIP_Real getMinActivity ( SCIP_SET *  set, SCIP_PROB *  transprob, SCIP_Real *  coefs, int *  inds, int  nnz, SCIP_Real *  curvarlbs, SCIP_Real *  curvarubs  )

static

calculates the minimal activity of a given set of bounds and coefficients

Parameters

set	global SCIP settings
transprob	transformed problem data
coefs	coefficients in sparse representation
inds	non-zero indices
nnz	number of non-zero indices
curvarlbs	current lower bounds of active problem variables (or NULL for global bounds)
curvarubs	current upper bounds of active problem variables (or NULL for global bounds)

Definition at line 2731 of file conflict.c.

References NULL, QUAD, QUAD_ASSIGN, QUAD_TO_DBL, SCIP_Real, SCIPprobGetVars(), SCIPquadprecProdDD, SCIPquadprecSumQQ, SCIPsetInfinity(), SCIPsetIsInfinity(), SCIPvarGetLbGlobal(), SCIPvarGetProbindex(), and SCIPvarGetUbGlobal().

Referenced by createAndAddProofcons(), and propagateLongProof().

getMaxActivity()

static SCIP_Real getMaxActivity ( SCIP_SET *  set, SCIP_PROB *  transprob, SCIP_Real *  coefs, int *  inds, int  nnz, SCIP_Real *  curvarlbs, SCIP_Real *  curvarubs  )

static

calculates the minimal activity of a given set of bounds and coefficients

Parameters

set	global SCIP settings
transprob	transformed problem data
coefs	coefficients in sparse representation
inds	non-zero indices
nnz	number of non-zero indices
curvarlbs	current lower bounds of active problem variables (or NULL for global bounds)
curvarubs	current upper bounds of active problem variables (or NULL for global bounds)

Definition at line 2797 of file conflict.c.

References NULL, QUAD, QUAD_ASSIGN, QUAD_TO_DBL, SCIP_Real, SCIPprobGetVars(), SCIPquadprecProdDD, SCIPquadprecSumQQ, SCIPsetInfinity(), SCIPsetIsInfinity(), SCIPvarGetLbGlobal(), SCIPvarGetProbindex(), and SCIPvarGetUbGlobal().

Referenced by createAndAddProofcons(), and tightenDualproof().

propagateLongProof()

static SCIP_RETCODE propagateLongProof ( SCIP_CONFLICT *  conflict, SCIP_SET *  set, SCIP_STAT *  stat, SCIP_REOPT *  reopt, SCIP_TREE *  tree, BMS_BLKMEM *  blkmem, SCIP_PROB *  origprob, SCIP_PROB *  transprob, SCIP_LP *  lp, SCIP_BRANCHCAND *  branchcand, SCIP_EVENTQUEUE *  eventqueue, SCIP_CLIQUETABLE *  cliquetable, SCIP_Real *  coefs, int *  inds, int  nnz, SCIP_Real  rhs, SCIP_CONFTYPE  conflicttype, int  validdepth  )

static

Parameters

conflict	conflict analysis data
set	global SCIP settings
stat	dynamic SCIP statistics
reopt	reoptimization data
tree	tree data
blkmem	block memory
origprob	original problem
transprob	transformed problem
lp	LP data
branchcand	branching candidate storage
eventqueue	event queue
cliquetable	clique table data structure
coefs	coefficients in sparse representation
inds	non-zero indices
nnz	number of non-zero indices
rhs	right-hand side
conflicttype	type of the conflict
validdepth	depth where the proof is valid

Definition at line 2862 of file conflict.c.

References getMinActivity(), NULL, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIPprobGetVars(), SCIPsetIsEQ(), SCIPsetIsGE(), SCIPsetIsInfinity(), SCIPsetIsLE(), SCIPsetIsZero(), SCIPvarGetLbGlobal(), SCIPvarGetUbGlobal(), and tightenSingleVar().

Referenced by createAndAddProofcons().

createAndAddProofcons()

static SCIP_RETCODE createAndAddProofcons ( SCIP_CONFLICT *  conflict, SCIP_CONFLICTSTORE *  conflictstore, SCIP_PROOFSET *  proofset, SCIP_SET *  set, SCIP_STAT *  stat, SCIP_PROB *  origprob, SCIP_PROB *  transprob, SCIP_TREE *  tree, SCIP_REOPT *  reopt, SCIP_LP *  lp, SCIP_BRANCHCAND *  branchcand, SCIP_EVENTQUEUE *  eventqueue, SCIP_CLIQUETABLE *  cliquetable, BMS_BLKMEM *  blkmem  )

static

creates a proof constraint and tries to add it to the storage

Parameters

conflict	conflict analysis data
conflictstore	conflict pool data
proofset	proof set
set	global SCIP settings
stat	dynamic SCIP statistics
origprob	original problem
transprob	transformed problem
tree	tree data
reopt	reoptimization data
lp	LP data
branchcand	branching candidate storage
eventqueue	event queue
cliquetable	clique table data structure
blkmem	block memory

Definition at line 2966 of file conflict.c.

References SCIP_Stat::avgnnz, SCIP_Conflict::dualproofsbndnnonzeros, SCIP_Conflict::dualproofsinfnnonzeros, FALSE, getMaxActivity(), getMinActivity(), SCIP_Conflict::ndualproofsbndglobal, SCIP_Conflict::ndualproofsbndlocal, SCIP_Conflict::ndualproofsbndsuccess, SCIP_Conflict::ndualproofsinfglobal, SCIP_Conflict::ndualproofsinflocal, SCIP_Conflict::ndualproofsinfsuccess, NULL, SCIP_Prob::nvars, SCIP_Tree::path, proofsetGetConftype(), proofsetGetInds(), proofsetGetNVars(), proofsetGetRhs(), proofsetGetVals(), propagateLongProof(), SCIP_Bool, SCIP_CALL, SCIP_CONFTYPE_ALTBNDPROOF, SCIP_CONFTYPE_ALTINFPROOF, SCIP_CONFTYPE_BNDEXCEEDING, SCIP_CONFTYPE_INFEASLP, SCIP_INVALIDCALL, SCIP_MAXSTRLEN, SCIP_OKAY, SCIP_Real, SCIPaddCoefLinear(), SCIPconflictstoreAddDualraycons(), SCIPconflictstoreAddDualsolcons(), SCIPconflictstoreGetAvgNnzDualBndProofs(), SCIPconflictstoreGetAvgNnzDualInfProofs(), SCIPconflictstoreGetNDualBndProofs(), SCIPconflictstoreGetNDualInfProofs(), SCIPconsGetHdlr(), SCIPconshdlrGetName(), SCIPconsMarkConflict(), SCIPcreateConsLinear(), SCIPgetLhsLinear(), SCIPgetRhsLinear(), SCIPnodeAddCons(), SCIPnodeCutoff(), SCIPnodeGetNumber(), SCIPprobAddCons(), SCIPprobGetVars(), SCIPreleaseCons(), SCIPsetDebugMsg, SCIPsetInfinity(), SCIPsetIsGT(), SCIPsetIsInfinity(), SCIPsetIsLE(), SCIPsetIsNegative(), SCIPsetIsPositive(), SCIPsetIsZero(), SCIPsnprintf(), SCIPtreeGetEffectiveRootDepth(), SCIPtreeGetFocusDepth(), SCIPupgradeConsLinear(), SCIPvarIsIntegral(), SCIPvarIsRelaxationOnly(), SCIP_Prob::startnconss, TRUE, and SCIP_ProofSet::validdepth.

Referenced by conflictFlushProofset().

conflictFlushProofset()

static SCIP_RETCODE conflictFlushProofset ( SCIP_CONFLICT *  conflict, SCIP_CONFLICTSTORE *  conflictstore, BMS_BLKMEM *  blkmem, SCIP_SET *  set, SCIP_STAT *  stat, SCIP_PROB *  transprob, SCIP_PROB *  origprob, SCIP_TREE *  tree, SCIP_REOPT *  reopt, SCIP_LP *  lp, SCIP_BRANCHCAND *  branchcand, SCIP_EVENTQUEUE *  eventqueue, SCIP_CLIQUETABLE *  cliquetable  )

static

Parameters

conflict	conflict analysis data
conflictstore	conflict store
blkmem	block memory
set	global SCIP settings
stat	dynamic problem statistics
transprob	transformed problem after presolve
origprob	original problem
tree	branch and bound tree
reopt	reoptimization data structure
lp	current LP data
branchcand	branching candidate storage
eventqueue	event queue
cliquetable	clique table data structure

Definition at line 3245 of file conflict.c.

References SCIP_ProofSet::conflicttype, createAndAddProofcons(), FALSE, SCIP_Conflict::nproofsets, NULL, SCIP_Conflict::proofset, proofsetClear(), proofsetFree(), proofsetGetConftype(), proofsetGetInds(), proofsetGetNVars(), proofsetGetRhs(), proofsetGetVals(), SCIP_Conflict::proofsets, SCIP_Bool, SCIP_CALL, SCIP_CONFTYPE_BNDEXCEEDING, SCIP_CONFTYPE_INFEASLP, SCIP_CONFTYPE_UNKNOWN, SCIP_OKAY, SCIP_Real, SCIPprobGetVars(), tightenSingleVar(), TRUE, and SCIP_ProofSet::validdepth.

Referenced by conflictAnalyzeLP().

conflictAddConflictCons()

static SCIP_RETCODE conflictAddConflictCons ( SCIP_CONFLICT *  conflict, BMS_BLKMEM *  blkmem, SCIP_SET *  set, SCIP_STAT *  stat, SCIP_PROB *  transprob, SCIP_PROB *  origprob, SCIP_TREE *  tree, SCIP_REOPT *  reopt, SCIP_LP *  lp, SCIP_BRANCHCAND *  branchcand, SCIP_EVENTQUEUE *  eventqueue, SCIP_CLIQUETABLE *  cliquetable, SCIP_CONFLICTSET *  conflictset, int  insertdepth, SCIP_Bool *  success  )

static

adds the given conflict set as conflict constraint to the problem

Parameters

conflict	conflict analysis data
blkmem	block memory
set	global SCIP settings
stat	dynamic problem statistics
transprob	transformed problem after presolve
origprob	original problem
tree	branch and bound tree
reopt	reoptimization data structure
lp	current LP data
branchcand	branching candidate storage
eventqueue	event queue
cliquetable	clique table data structure
conflictset	conflict set to add to the tree
insertdepth	depth level at which the conflict set should be added
success	pointer to store whether the addition was successful

Definition at line 3364 of file conflict.c.

References SCIP_ConflictSet::bdchginfos, bound, SCIP_BdChgInfo::boundtype, SCIP_ConflictSet::conflictdepth, SCIP_ConflictSet::conflicttype, detectImpliedBounds(), SCIP_Conflict::dIBclock, SCIP_Lp::diving, FALSE, h, SCIP_ConflictSet::nbdchginfos, NULL, SCIP_Tree::path, SCIP_ConflictSet::relaxedbds, SCIP_Tree::root, SCIP_Bool, SCIP_BOUNDTYPE_LOWER, SCIP_CALL, SCIP_CONFTYPE_UNKNOWN, SCIP_CONSADDED, SCIP_OKAY, SCIP_Real, SCIPboundtypeOpposite(), SCIPclockStart(), SCIPclockStop(), SCIPconflicthdlrExec(), SCIPconflicthdlrGetName(), SCIPconflicthdlrGetPriority(), SCIPdebugCheckConflict, SCIPnodeAddBoundchg(), SCIPsetDebugMsg, SCIPsetIsIntegral(), SCIPsetSortConflicthdlrs(), SCIPtreeGetCurrentDepth(), SCIPtreeGetFocusDepth(), SCIPvarGetName(), SCIPvarIsIntegral(), SCIP_Lp::strongbranching, TRUE, updateStatistics(), SCIP_ConflictSet::usescutoffbound, SCIP_ConflictSet::validdepth, and SCIP_BdChgInfo::var.

Referenced by SCIPconflictFlushConss().

SCIPconflictFlushConss()

SCIP_RETCODE SCIPconflictFlushConss	(	SCIP_CONFLICT *	conflict,
		BMS_BLKMEM *	blkmem,
		SCIP_SET *	set,
		SCIP_STAT *	stat,
		SCIP_PROB *	transprob,
		SCIP_PROB *	origprob,
		SCIP_TREE *	tree,
		SCIP_REOPT *	reopt,
		SCIP_LP *	lp,
		SCIP_BRANCHCAND *	branchcand,
		SCIP_EVENTQUEUE *	eventqueue,
		SCIP_CLIQUETABLE *	cliquetable
	)

adds the collected conflict constraints to the corresponding nodes; the best set->conf_maxconss conflict constraints are added to the node of their validdepth; additionally (if not yet added, and if repropagation is activated), the conflict constraint that triggers the earliest repropagation is added to the node of its validdepth

Parameters

conflict	conflict analysis data
blkmem	block memory of transformed problem
set	global SCIP settings
stat	dynamic problem statistics
transprob	transformed problem
origprob	original problem
tree	branch and bound tree
reopt	reoptimization data structure
lp	current LP data
branchcand	branching candidate storage
eventqueue	event queue
cliquetable	clique table data structure

Definition at line 3515 of file conflict.c.

References conflictAddConflictCons(), conflictCalcMaxsize(), SCIP_ConflictSet::conflictdepth, conflictFreeTmpBdchginfos(), conflictsetFree(), SCIP_Conflict::conflictsets, SCIP_Node::depth, SCIP_ConflictSet::insertdepth, SCIP_ConflictSet::nbdchginfos, SCIP_Conflict::nconflictsets, NULL, SCIP_Tree::path, SCIP_Tree::pathlen, SCIP_ConflictSet::repropagate, SCIP_ConflictSet::repropdepth, SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIPdebug, SCIPnodeCutoff(), SCIPnodePropagateAgain(), SCIPsetDebugMsg, SCIPtreeGetCurrentDepth(), SCIPtreeGetFocusDepth(), SCIPvisualFoundConflict(), SCIP_ConflictSet::validdepth, and SCIP_Stat::visual.

Referenced by conflictAnalyzeLP(), SCIPconflictAnalyzePseudo(), SCIPpropagateDomains(), and solveNode().

SCIPconflictGetNConflicts()

int SCIPconflictGetNConflicts

(

SCIP_CONFLICT *

conflict

)

returns the current number of conflict sets in the conflict set storage

Parameters

conflict

conflict analysis data

Definition at line 3724 of file conflict.c.

References SCIP_Conflict::nconflictsets, and NULL.

Referenced by propAndSolve(), SCIPgetNConflictConssFoundNode(), SCIPgetVarStrongbranchWithPropagation(), and solveNode().

SCIPconflictGetNAppliedConss()

SCIP_Longint SCIPconflictGetNAppliedConss

(

SCIP_CONFLICT *

conflict

)

returns the total number of conflict constraints that were added to the problem

Parameters

conflict

conflict analysis data

Definition at line 3734 of file conflict.c.

References SCIP_Conflict::nappliedglbconss, SCIP_Conflict::nappliedlocconss, and NULL.

Referenced by SCIPgetNConflictConssApplied().

SCIPconflictGetNAppliedLiterals()

SCIP_Longint SCIPconflictGetNAppliedLiterals

(

SCIP_CONFLICT *

conflict

)

returns the total number of literals in conflict constraints that were added to the problem

Parameters

conflict

conflict analysis data

Definition at line 3744 of file conflict.c.

References SCIP_Conflict::nappliedglbliterals, SCIP_Conflict::nappliedlocliterals, and NULL.

SCIPconflictGetNGlobalChgBds()

SCIP_Longint SCIPconflictGetNGlobalChgBds

(

SCIP_CONFLICT *

conflict

)

returns the total number of global bound changes applied by the conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 3754 of file conflict.c.

References SCIP_Conflict::nglbchgbds, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNAppliedGlobalConss()

SCIP_Longint SCIPconflictGetNAppliedGlobalConss

(

SCIP_CONFLICT *

conflict

)

returns the total number of conflict constraints that were added globally to the problem

Parameters

conflict

conflict analysis data

Definition at line 3764 of file conflict.c.

References SCIP_Conflict::nappliedglbconss, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNAppliedGlobalLiterals()

SCIP_Longint SCIPconflictGetNAppliedGlobalLiterals

(

SCIP_CONFLICT *

conflict

)

returns the total number of literals in conflict constraints that were added globally to the problem

Parameters

conflict

conflict analysis data

Definition at line 3774 of file conflict.c.

References SCIP_Conflict::nappliedglbliterals, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNLocalChgBds()

SCIP_Longint SCIPconflictGetNLocalChgBds

(

SCIP_CONFLICT *

conflict

)

returns the total number of local bound changes applied by the conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 3784 of file conflict.c.

References SCIP_Conflict::nlocchgbds, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNAppliedLocalConss()

SCIP_Longint SCIPconflictGetNAppliedLocalConss

(

SCIP_CONFLICT *

conflict

)

returns the total number of conflict constraints that were added locally to the problem

Parameters

conflict

conflict analysis data

Definition at line 3794 of file conflict.c.

References SCIP_Conflict::nappliedlocconss, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNAppliedLocalLiterals()

SCIP_Longint SCIPconflictGetNAppliedLocalLiterals

(

SCIP_CONFLICT *

conflict

)

returns the total number of literals in conflict constraints that were added locally to the problem

Parameters

conflict

conflict analysis data

Definition at line 3804 of file conflict.c.

References SCIP_Conflict::nappliedlocliterals, and NULL.

Referenced by SCIPprintConflictStatistics().

bdchginfoIsResolvable()

static SCIP_Bool bdchginfoIsResolvable ( SCIP_BDCHGINFO *  bdchginfo )

static

returns whether bound change has a valid reason that can be resolved in conflict analysis

Parameters

bdchginfo

bound change information

Definition at line 3822 of file conflict.c.

References NULL, SCIP_BOUNDCHGTYPE_CONSINFER, SCIP_BOUNDCHGTYPE_PROPINFER, SCIPbdchginfoGetChgtype(), SCIPbdchginfoGetInferProp(), and SCIPbdchginfoIsRedundant().

Referenced by addCand(), and conflictCreateReconvergenceConss().

SCIP_DECL_SORTPTRCOMP()

static SCIP_DECL_SORTPTRCOMP ( conflictBdchginfoComp  )

static

compares two conflict set entries, such that bound changes infered later are ordered prior to ones that were infered earlier

Definition at line 3838 of file conflict.c.

References NULL, SCIPbdchgidxIsEarlierNonNull(), SCIPbdchginfoGetIdx(), and SCIPbdchginfoIsRedundant().

SCIPconflictApplicable()

SCIP_Bool SCIPconflictApplicable

(

SCIP_SET *

set

)

return TRUE if conflict analysis is applicable; In case the function return FALSE there is no need to initialize the conflict analysis since it will not be applied

Parameters

set	global SCIP settings

Definition at line 3862 of file conflict.c.

References FALSE, and TRUE.

Referenced by SCIPconflictAnalyze(), and SCIPisConflictAnalysisApplicable().

SCIPconflictCreate()

SCIP_RETCODE SCIPconflictCreate	(	SCIP_CONFLICT **	conflict,
		BMS_BLKMEM *	blkmem,
		SCIP_SET *	set
	)

creates conflict analysis data for propagation conflicts

Parameters

conflict	pointer to conflict analysis data
blkmem	block memory of transformed problem
set	global SCIP settings

Definition at line 3878 of file conflict.c.

References BMSallocMemory, conflictInitProofset(), conflictsetCreate(), NULL, SCIP_ALLOC, SCIP_CALL, SCIP_CLOCKTYPE_DEFAULT, SCIP_OKAY, SCIPclockCreate(), SCIPconflictEnableOrDisableClocks(), and SCIPpqueueCreate().

Referenced by SCIPtransformProb().

SCIPconflictFree()

SCIP_RETCODE SCIPconflictFree	(	SCIP_CONFLICT **	conflict,
		BMS_BLKMEM *	blkmem
	)

frees conflict analysis data for propagation conflicts

Parameters

conflict	pointer to conflict analysis data
blkmem	block memory of transformed problem

Definition at line 3968 of file conflict.c.

References BMSfreeMemory, BMSfreeMemoryArrayNull, conflictsetFree(), NULL, proofsetFree(), SCIP_OKAY, SCIPclockFree(), and SCIPpqueueFree().

Referenced by freeTransform().

conflictClear()

static void conflictClear ( SCIP_CONFLICT *  conflict )

static

clears the conflict queue and the current conflict set

Parameters

conflict

conflict analysis data

Definition at line 4004 of file conflict.c.

References SCIP_Conflict::bdchgqueue, SCIP_Conflict::conflictset, conflictsetClear(), SCIP_Conflict::forcedbdchgqueue, NULL, and SCIPpqueueClear().

Referenced by conflictAnalyze(), conflictCreateReconvergenceConss(), and SCIPconflictInit().

SCIPconflictInit()

SCIP_RETCODE SCIPconflictInit	(	SCIP_CONFLICT *	conflict,
		SCIP_SET *	set,
		SCIP_STAT *	stat,
		SCIP_PROB *	prob,
		SCIP_CONFTYPE	conftype,
		SCIP_Bool	usescutoffbound
	)

initializes the propagation conflict analysis by clearing the conflict candidate queue

Parameters

conflict	conflict analysis data
set	global SCIP settings
stat	problem statistics
prob	problem data
conftype	type of the conflict
usescutoffbound	depends the conflict on a cutoff bound?

Definition at line 4016 of file conflict.c.

References conflictClear(), SCIP_Conflict::conflictset, SCIP_ConflictSet::conflicttype, SCIP_Conflict::count, SCIP_Stat::glbhistory, SCIP_Stat::glbhistorycrun, SCIP_Stat::lastconflictnode, SCIP_Stat::nnodes, NULL, SCIP_Prob::nvars, SCIP_CALL, SCIP_CONFTYPE_BNDEXCEEDING, SCIP_CONFTYPE_INFEASLP, SCIP_CONFTYPE_PROPAGATION, SCIP_OKAY, SCIPhistoryScaleVSIDS(), SCIPsetDebugMsg, SCIPvarScaleVSIDS(), SCIP_ConflictSet::usescutoffbound, SCIP_Prob::vars, and SCIP_Stat::vsidsweight.

Referenced by conflictAnalyzeRemainingBdchgs(), conflictCreateReconvergenceConss(), and SCIPinitConflictAnalysis().

conflictMarkBoundCheckPresence()

static SCIP_Bool conflictMarkBoundCheckPresence ( SCIP_CONFLICT *  conflict, SCIP_SET *  set, SCIP_BDCHGINFO *  bdchginfo, SCIP_Real  relaxedbd  )

static

marks bound to be present in the current conflict and returns whether a bound which is at least as tight was already member of the current conflict (i.e., the given bound change does not need to be added)

Parameters

conflict	conflict analysis data
set	global SCIP settings
bdchginfo	bound change to add to the conflict set
relaxedbd	relaxed bound

Definition at line 4085 of file conflict.c.

References SCIP_Var::conflictlb, SCIP_Var::conflictlbcount, SCIP_Var::conflictrelaxedlb, SCIP_Var::conflictrelaxedub, SCIP_Var::conflictub, SCIP_Var::conflictubcount, SCIP_Conflict::count, FALSE, MAX, NULL, SCIP_BOUNDTYPE_LOWER, SCIP_BOUNDTYPE_UPPER, SCIP_Real, SCIPABORT, SCIPbdchginfoGetBoundtype(), SCIPbdchginfoGetNewbound(), SCIPbdchginfoGetVar(), SCIPerrorMessage, SCIPsetDebugMsg, SCIPvarGetName(), and TRUE.

Referenced by conflictAddConflictBound(), and conflictQueueBound().

conflictAddConflictBound()

static SCIP_RETCODE conflictAddConflictBound ( SCIP_CONFLICT *  conflict, BMS_BLKMEM *  blkmem, SCIP_SET *  set, SCIP_BDCHGINFO *  bdchginfo, SCIP_Real  relaxedbd  )

static

puts bound change into the current conflict set

Parameters

conflict	conflict analysis data
blkmem	block memory of transformed problem
set	global SCIP settings
bdchginfo	bound change to add to the conflict set
relaxedbd	relaxed bound

Definition at line 4174 of file conflict.c.

References conflictMarkBoundCheckPresence(), SCIP_Conflict::conflictset, conflictsetAddBound(), NULL, SCIP_BOUNDTYPE_LOWER, SCIP_BOUNDTYPE_UPPER, SCIP_CALL, SCIP_OKAY, SCIPbdchginfoGetBoundtype(), SCIPbdchginfoGetDepth(), SCIPbdchginfoGetNewbound(), SCIPbdchginfoGetVar(), SCIPbdchginfoIsRedundant(), SCIPsetDebugMsg, SCIPsetIsGE(), SCIPsetIsLE(), and SCIPvarGetName().

Referenced by conflictAnalyze(), conflictAnalyzeRemainingBdchgs(), and conflictCreateReconvergenceConss().

isBoundchgUseless()

static SCIP_Bool isBoundchgUseless ( SCIP_SET *  set, SCIP_BDCHGINFO *  bdchginfo  )

static

returns whether the negation of the given bound change would lead to a globally valid literal

Parameters

set	global SCIP settings
bdchginfo	bound change information

Definition at line 4217 of file conflict.c.

References bound, SCIP_BOUNDTYPE_LOWER, SCIP_BOUNDTYPE_UPPER, SCIP_Real, SCIP_VARTYPE_CONTINUOUS, SCIPbdchginfoGetBoundtype(), SCIPbdchginfoGetNewbound(), SCIPbdchginfoGetVar(), SCIPsetIsFeasGE(), SCIPsetIsFeasLE(), SCIPvarGetLbGlobal(), SCIPvarGetType(), and SCIPvarGetUbGlobal().

Referenced by conflictQueueBound().

conflictQueueBound()

static SCIP_RETCODE conflictQueueBound ( SCIP_CONFLICT *  conflict, SCIP_SET *  set, SCIP_BDCHGINFO *  bdchginfo, SCIP_Real  relaxedbd  )

static

adds given bound change information to the conflict candidate queue

Parameters

conflict	conflict analysis data
set	global SCIP settings
bdchginfo	bound change information
relaxedbd	relaxed bound

Definition at line 4237 of file conflict.c.

References SCIP_Conflict::bdchgqueue, conflictMarkBoundCheckPresence(), SCIP_Conflict::forcedbdchgqueue, isBoundchgUseless(), NULL, SCIP_BOUNDTYPE_LOWER, SCIP_BOUNDTYPE_UPPER, SCIP_CALL, SCIP_OKAY, SCIPbdchginfoGetBoundtype(), SCIPbdchginfoGetNewbound(), SCIPbdchginfoGetVar(), SCIPbdchginfoIsRedundant(), SCIPpqueueInsert(), SCIPsetIsGE(), SCIPsetIsLE(), and SCIPvarIsBinary().

Referenced by conflictAddBound(), and conflictCreateReconvergenceConss().

convertToActiveVar()

static SCIP_RETCODE convertToActiveVar ( SCIP_VAR **  var, SCIP_SET *  set, SCIP_BOUNDTYPE *  boundtype, SCIP_Real *  bound  )

static

convert variable and bound change to active variable

Parameters

var	pointer to variable
set	global SCIP settings
boundtype	pointer to type of bound that was changed: lower or upper bound
bound	pointer to bound to convert, or NULL

Definition at line 4283 of file conflict.c.

References NULL, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIP_VARSTATUS_FIXED, SCIPboundtypeOpposite(), SCIPvarGetProbvarSum(), and SCIPvarGetStatus().

Referenced by SCIPconflictAddBound(), SCIPconflictAddRelaxedBound(), and SCIPconflictIsVarUsed().

conflictAddBound()

static SCIP_RETCODE conflictAddBound ( SCIP_CONFLICT *  conflict, BMS_BLKMEM *  blkmem, SCIP_SET *  set, SCIP_STAT *  stat, SCIP_VAR *  var, SCIP_BOUNDTYPE  boundtype, SCIP_BDCHGINFO *  bdchginfo, SCIP_Real  relaxedbd  )

static

adds variable's bound to conflict candidate queue

Parameters

conflict	conflict analysis data
blkmem	block memory
set	global SCIP settings
stat	dynamic problem statistics
var	problem variable
boundtype	type of bound that was changed: lower or upper bound
bdchginfo	bound change info, or NULL
relaxedbd	relaxed bound

Definition at line 4318 of file conflict.c.

References conflictQueueBound(), incVSIDS(), NULL, SCIP_BOUNDCHGTYPE_BRANCHING, SCIP_BOUNDCHGTYPE_CONSINFER, SCIP_BOUNDTYPE_LOWER, SCIP_CALL, SCIP_OKAY, SCIPbdchginfoGetBoundtype(), SCIPbdchginfoGetChgtype(), SCIPbdchginfoGetDepth(), SCIPbdchginfoGetInferCons(), SCIPbdchginfoGetInferInfo(), SCIPbdchginfoGetInferProp(), SCIPbdchginfoGetNewbound(), SCIPbdchginfoGetOldbound(), SCIPbdchginfoGetPos(), SCIPbdchginfoGetVar(), SCIPbdchginfoIsRedundant(), SCIPconsGetName(), SCIPpropGetName(), SCIPsetDebugMsg, SCIPsetIsGE(), SCIPsetIsGT(), SCIPsetIsLE(), SCIPsetIsLT(), SCIPvarGetName(), SCIPvarGetStatus(), SCIPvarGetType(), and SCIPvarIsActive().

Referenced by conflictAnalyzeRemainingBdchgs(), SCIPconflictAddBound(), and SCIPconflictAddRelaxedBound().

SCIPconflictAddBound()

SCIP_RETCODE SCIPconflictAddBound	(	SCIP_CONFLICT *	conflict,
		BMS_BLKMEM *	blkmem,
		SCIP_SET *	set,
		SCIP_STAT *	stat,
		SCIP_VAR *	var,
		SCIP_BOUNDTYPE	boundtype,
		SCIP_BDCHGIDX *	bdchgidx
	)

adds variable's bound to conflict candidate queue

Parameters

conflict	conflict analysis data
blkmem	block memory
set	global SCIP settings
stat	dynamic problem statistics
var	problem variable
boundtype	type of bound that was changed: lower or upper bound
bdchgidx	bound change index (time stamp of bound change), or NULL for current time

Definition at line 4374 of file conflict.c.

References conflictAddBound(), convertToActiveVar(), FALSE, NULL, scalars, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIP_VARSTATUS_FIXED, SCIP_VARSTATUS_MULTAGGR, SCIPbdchgidxIsEarlier(), SCIPbdchginfoGetIdx(), SCIPbdchginfoGetNewbound(), SCIPboundtypeOpposite(), SCIPconflictAddBound(), SCIPvarGetBdchgInfo(), SCIPvarGetMultaggrNVars(), SCIPvarGetMultaggrScalars(), SCIPvarGetMultaggrVars(), SCIPvarGetStatus(), and SCIPvarIsActive().

Referenced by SCIPaddConflictBd(), SCIPaddConflictBinvar(), SCIPaddConflictLb(), SCIPaddConflictUb(), SCIPconflictAddBound(), and SCIPconflictAddRelaxedBound().

SCIPconflictAddRelaxedBound()

SCIP_RETCODE SCIPconflictAddRelaxedBound	(	SCIP_CONFLICT *	conflict,
		BMS_BLKMEM *	blkmem,
		SCIP_SET *	set,
		SCIP_STAT *	stat,
		SCIP_VAR *	var,
		SCIP_BOUNDTYPE	boundtype,
		SCIP_BDCHGIDX *	bdchgidx,
		SCIP_Real	relaxedbd
	)

adds variable's bound to conflict candidate queue

Parameters

conflict	conflict analysis data
blkmem	block memory
set	global SCIP settings
stat	dynamic problem statistics
var	problem variable
boundtype	type of bound that was changed: lower or upper bound
bdchgidx	bound change index (time stamp of bound change), or NULL for current time
relaxedbd	the relaxed bound

Definition at line 4435 of file conflict.c.

References SCIP_BdChgInfo::bdchgidx, conflictAddBound(), convertToActiveVar(), FALSE, MAX, NULL, SCIP_BdChgInfo::pos, SCIP_BOUNDTYPE_LOWER, SCIP_BOUNDTYPE_UPPER, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIP_VARSTATUS_FIXED, SCIP_VARSTATUS_MULTAGGR, SCIPbdchgidxGetPos(), SCIPbdchgidxIsEarlier(), SCIPbdchginfoGetDepth(), SCIPbdchginfoGetIdx(), SCIPbdchginfoGetNewbound(), SCIPbdchginfoGetOldbound(), SCIPbdchginfoGetPos(), SCIPbdchginfoIsRedundant(), SCIPconflictAddBound(), SCIPsetDebugMsg, SCIPsetIsGE(), SCIPsetIsGT(), SCIPsetIsLE(), SCIPsetIsLT(), SCIPvarAdjustLb(), SCIPvarAdjustUb(), SCIPvarGetBdchgInfo(), SCIPvarGetBdchgInfoLb(), SCIPvarGetBdchgInfoUb(), SCIPvarGetLbGlobal(), SCIPvarGetName(), SCIPvarGetStatus(), SCIPvarGetUbGlobal(), and SCIPvarIsActive().

Referenced by SCIPaddConflictRelaxedBd(), SCIPaddConflictRelaxedLb(), and SCIPaddConflictRelaxedUb().

SCIPconflictIsVarUsed()

SCIP_RETCODE SCIPconflictIsVarUsed	(	SCIP_CONFLICT *	conflict,
		SCIP_VAR *	var,
		SCIP_SET *	set,
		SCIP_BOUNDTYPE	boundtype,
		SCIP_BDCHGIDX *	bdchgidx,
		SCIP_Bool *	used
	)

checks if the given variable is already part of the current conflict set or queued for resolving with the same or even stronger bound

Parameters

conflict	conflict analysis data
var	problem variable
set	global SCIP settings
boundtype	type of bound for which the score should be increased
bdchgidx	bound change index (time stamp of bound change), or NULL for current time
used	pointer to store if the variable is already used

Definition at line 4599 of file conflict.c.

References SCIP_Var::conflictlb, SCIP_Var::conflictlbcount, SCIP_Var::conflictub, SCIP_Var::conflictubcount, convertToActiveVar(), SCIP_Conflict::count, FALSE, NULL, SCIP_BOUNDTYPE_LOWER, SCIP_BOUNDTYPE_UPPER, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIP_VARSTATUS_FIXED, SCIP_VARSTATUS_MULTAGGR, SCIPABORT, SCIPerrorMessage, SCIPgetVarLbAtIndex(), SCIPgetVarUbAtIndex(), SCIPsetDebugMsg, SCIPvarGetName(), SCIPvarGetStatus(), SCIPvarIsActive(), and TRUE.

Referenced by SCIPisConflictVarUsed().

SCIPconflictGetVarLb()

SCIP_Real SCIPconflictGetVarLb	(	SCIP_CONFLICT *	conflict,
		SCIP_VAR *	var
	)

returns the conflict lower bound if the variable is present in the current conflict set; otherwise the global lower bound

Parameters

conflict	conflict analysis data
var	problem variable

Definition at line 4659 of file conflict.c.

References SCIP_Var::conflictlb, SCIP_Var::conflictlbcount, SCIP_Var::conflictrelaxedlb, SCIP_Conflict::count, EPSGE, and SCIPvarGetLbGlobal().

Referenced by SCIPgetConflictVarLb().

SCIPconflictGetVarUb()

SCIP_Real SCIPconflictGetVarUb	(	SCIP_CONFLICT *	conflict,
		SCIP_VAR *	var
	)

returns the conflict upper bound if the variable is present in the current conflict set; otherwise the global upper bound

Parameters

conflict	conflict analysis data
var	problem variable

Definition at line 4676 of file conflict.c.

References SCIP_Var::conflictrelaxedub, SCIP_Var::conflictub, SCIP_Var::conflictubcount, SCIP_Conflict::count, EPSLE, and SCIPvarGetUbGlobal().

Referenced by SCIPgetConflictVarUb().

conflictRemoveCand()

static SCIP_BDCHGINFO* conflictRemoveCand ( SCIP_CONFLICT *  conflict )

static

removes and returns next conflict analysis candidate from the candidate queue

Parameters

conflict

conflict analysis data

Definition at line 4692 of file conflict.c.

References bdchginfoIsInvalid(), SCIP_Conflict::bdchgqueue, SCIP_Var::conflictlbcount, SCIP_Var::conflictrelaxedlb, SCIP_Var::conflictrelaxedub, SCIP_Var::conflictubcount, SCIP_Conflict::forcedbdchgqueue, NULL, SCIP_BOUNDTYPE_LOWER, SCIP_BOUNDTYPE_UPPER, SCIP_REAL_MAX, SCIP_REAL_MIN, SCIPbdchginfoGetBoundtype(), SCIPbdchginfoGetVar(), SCIPbdchginfoIsRedundant(), SCIPpqueueNElems(), and SCIPpqueueRemove().

Referenced by conflictAnalyze(), and conflictCreateReconvergenceConss().

conflictFirstCand()

static SCIP_BDCHGINFO* conflictFirstCand ( SCIP_CONFLICT *  conflict )

static

returns next conflict analysis candidate from the candidate queue without removing it

Parameters

conflict

conflict analysis data

Definition at line 4736 of file conflict.c.

References bdchginfoIsInvalid(), SCIP_Conflict::bdchgqueue, SCIP_Conflict::forcedbdchgqueue, NULL, SCIP_BOUNDTYPE_LOWER, SCIPbdchginfoGetBoundtype(), SCIPbdchginfoGetDepth(), SCIPbdchginfoGetNewbound(), SCIPbdchginfoGetVar(), SCIPbdchginfoIsRedundant(), SCIPdebugMessage, SCIPpqueueFirst(), SCIPpqueueNElems(), SCIPpqueueRemove(), and SCIPvarGetName().

Referenced by conflictAnalyze(), and conflictCreateReconvergenceConss().

conflictAddConflictset()

static SCIP_RETCODE conflictAddConflictset ( SCIP_CONFLICT *  conflict, BMS_BLKMEM *  blkmem, SCIP_SET *  set, SCIP_STAT *  stat, SCIP_TREE *  tree, int  validdepth, SCIP_Bool  diving, SCIP_Bool  repropagate, SCIP_Bool *  success, int *  nliterals  )

static

adds the current conflict set (extended by all remaining bound changes in the queue) to the pool of conflict sets

Parameters

conflict	conflict analysis data
blkmem	block memory of transformed problem
set	global SCIP settings
stat	dynamic problem statistics
tree	branch and bound tree
validdepth	minimal depth level at which the conflict set is valid
diving	are we in strong branching or diving mode?
repropagate	should the constraint trigger a repropagation?
success	pointer to store whether the conflict set is valid
nliterals	pointer to store the number of literals in the generated conflictset

Definition at line 4790 of file conflict.c.

References SCIP_ConflictSet::bdchginfos, SCIP_Conflict::bdchgqueue, conflictInsertConflictset(), SCIP_Conflict::conflictset, conflictsetAddBounds(), conflictsetCalcInsertDepth(), conflictsetCopy(), conflictsetFree(), FALSE, SCIP_Conflict::forcedbdchgqueue, SCIP_ConflictSet::insertdepth, MAX, SCIP_ConflictSet::nbdchginfos, NULL, SCIP_Tree::path, SCIP_Tree::pathlen, SCIP_ConflictSet::relaxedbds, SCIP_ConflictSet::repropagate, SCIP_CALL, SCIP_OKAY, SCIPdebugCheckConflict, SCIPpqueueElems(), SCIPpqueueNElems(), SCIPsetDebugMsg, SCIPtreeGetCurrentDepth(), SCIPtreeGetFocusDepth(), TRUE, and SCIP_ConflictSet::validdepth.

Referenced by conflictAnalyze(), and conflictCreateReconvergenceConss().

conflictResolveBound()

static SCIP_RETCODE conflictResolveBound ( SCIP_CONFLICT *  conflict, SCIP_SET *  set, SCIP_BDCHGINFO *  bdchginfo, SCIP_Real  relaxedbd, int  validdepth, SCIP_Bool *  resolved  )

static

tries to resolve given bound change

• resolutions on local constraints are only applied, if the constraint is valid at the current minimal valid depth level, because this depth level is the topmost level to add the conflict constraint to anyways

Note

it is sufficient to explain the relaxed bound change

Parameters

conflict	conflict analysis data
set	global SCIP settings
bdchginfo	bound change to resolve
relaxedbd	the relaxed bound
validdepth	minimal depth level at which the conflict is valid
resolved	pointer to store whether the bound change was resolved

Definition at line 4889 of file conflict.c.

References bdchginfoIsInvalid(), SCIP_ConflictSet::bdchginfos, SCIP_Conflict::bdchgqueue, SCIP_Conflict::conflictset, FALSE, SCIP_Conflict::forcedbdchgqueue, SCIP_ConflictSet::nbdchginfos, NULL, SCIP_ConflictSet::relaxedbds, SCIP_BOUNDCHGTYPE_BRANCHING, SCIP_BOUNDCHGTYPE_CONSINFER, SCIP_BOUNDCHGTYPE_PROPINFER, SCIP_BOUNDTYPE_LOWER, SCIP_CALL, SCIP_INVALIDDATA, SCIP_OKAY, SCIP_Real, SCIP_SUCCESS, SCIP_VARSTATUS_AGGREGATED, SCIP_VARSTATUS_MULTAGGR, SCIP_VARSTATUS_NEGATED, SCIPbdchginfoGetBoundtype(), SCIPbdchginfoGetChgtype(), SCIPbdchginfoGetDepth(), SCIPbdchginfoGetIdx(), SCIPbdchginfoGetInferBoundtype(), SCIPbdchginfoGetInferCons(), SCIPbdchginfoGetInferInfo(), SCIPbdchginfoGetInferProp(), SCIPbdchginfoGetInferVar(), SCIPbdchginfoGetNewbound(), SCIPbdchginfoGetPos(), SCIPbdchginfoGetRelaxedBound(), SCIPbdchginfoGetVar(), SCIPbdchginfoIsRedundant(), SCIPconsGetName(), SCIPconsGetValidDepth(), SCIPconsIsGlobal(), SCIPconsResolvePropagation(), SCIPerrorMessage, SCIPgetVarBdAtIndex(), SCIPpqueueElems(), SCIPpqueueNElems(), SCIPpropGetName(), SCIPpropResolvePropagation(), SCIPsetDebugMsg, SCIPsetDebugMsgPrint, SCIPvarGetMultaggrNVars(), SCIPvarGetName(), SCIPvarGetProbvarSum(), SCIPvarGetStatus(), SCIPvarGetType(), SCIPvarIsActive(), and TRUE.

Referenced by conflictAnalyze(), and conflictCreateReconvergenceConss().

conflictCreateReconvergenceConss()

static SCIP_RETCODE conflictCreateReconvergenceConss ( SCIP_CONFLICT *  conflict, BMS_BLKMEM *  blkmem, SCIP_SET *  set, SCIP_STAT *  stat, SCIP_PROB *  prob, SCIP_TREE *  tree, SCIP_Bool  diving, int  validdepth, SCIP_BDCHGINFO *  firstuip, int *  nreconvconss, int *  nreconvliterals  )

static

if only one conflicting bound change of the last depth level was used, and if this can be resolved, creates GRASP-like reconvergence conflict constraints in the conflict graph up to the branching variable of this depth level

Parameters

conflict	conflict analysis data
blkmem	block memory of transformed problem
set	global SCIP settings
stat	problem statistics
prob	problem data
tree	branch and bound tree
diving	are we in strong branching or diving mode?
validdepth	minimal depth level at which the initial conflict set is valid
firstuip	first UIP of conflict graph
nreconvconss	pointer to store the number of generated reconvergence constraints
nreconvliterals	pointer to store the number of literals generated reconvergence constraints

Definition at line 5102 of file conflict.c.

References bdchginfoIsResolvable(), SCIP_ConflictSet::bdchginfos, SCIP_Conflict::bdchgqueue, conflictAddConflictBound(), conflictAddConflictset(), conflictClear(), conflictCreateTmpBdchginfo(), conflictFirstCand(), conflictQueueBound(), conflictRemoveCand(), conflictResolveBound(), SCIP_Conflict::conflictset, SCIP_ConflictSet::conflicttype, FALSE, SCIP_Conflict::forcedbdchgqueue, SCIP_ConflictSet::nbdchginfos, NULL, SCIP_Tree::path, SCIP_Tree::pathlen, SCIP_ConflictSet::relaxedbds, SCIP_Bool, SCIP_BOUNDTYPE_LOWER, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIP_REAL_MAX, SCIP_REAL_MIN, SCIPbdchginfoGetBoundtype(), SCIPbdchginfoGetDepth(), SCIPbdchginfoGetNewbound(), SCIPbdchginfoGetPos(), SCIPbdchginfoGetRelaxedBound(), SCIPbdchginfoGetVar(), SCIPbdchginfoIsRedundant(), SCIPboundtypeOpposite(), SCIPconflictInit(), SCIPdebugCheckConflictFrontier, SCIPpqueueNElems(), SCIPsetDebugMsg, SCIPsetIsIntegral(), SCIPtreeGetCurrentDepth(), SCIPtreeGetFocusDepth(), SCIPvarGetName(), SCIPvarIsActive(), SCIPvarIsIntegral(), and SCIP_ConflictSet::usescutoffbound.

Referenced by conflictAnalyze().

conflictAnalyze()

static SCIP_RETCODE conflictAnalyze ( SCIP_CONFLICT *  conflict, BMS_BLKMEM *  blkmem, SCIP_SET *  set, SCIP_STAT *  stat, SCIP_PROB *  prob, SCIP_TREE *  tree, SCIP_Bool  diving, int  validdepth, SCIP_Bool  mustresolve, int *  nconss, int *  nliterals, int *  nreconvconss, int *  nreconvliterals  )

static

analyzes conflicting bound changes that were added with calls to SCIPconflictAddBound() and SCIPconflictAddRelaxedBound(), and on success, calls the conflict handlers to create a conflict constraint out of the resulting conflict set; afterwards the conflict queue and the conflict set is cleared

Parameters

conflict	conflict analysis data
blkmem	block memory of transformed problem
set	global SCIP settings
stat	problem statistics
prob	problem data
tree	branch and bound tree
diving	are we in strong branching or diving mode?
validdepth	minimal depth level at which the initial conflict set is valid
mustresolve	should the conflict set only be used, if a resolution was applied?
nconss	pointer to store the number of generated conflict constraints
nliterals	pointer to store the number of literals in generated conflict constraints
nreconvconss	pointer to store the number of generated reconvergence constraints
nreconvliterals	pointer to store the number of literals generated reconvergence constraints

Definition at line 5339 of file conflict.c.

References SCIP_ConflictSet::bdchginfos, SCIP_Conflict::bdchgqueue, SCIP_DomChgBound::boundchgs, conflictAddConflictBound(), conflictAddConflictset(), conflictClear(), conflictCreateReconvergenceConss(), conflictFirstCand(), conflictRemoveCand(), conflictResolveBound(), SCIP_Conflict::conflictset, SCIP_ConflictSet::conflicttype, SCIP_Node::domchg, SCIP_DomChg::domchgbound, FALSE, SCIP_Conflict::forcedbdchgqueue, SCIP_ConflictSet::nbdchginfos, SCIP_DomChgBound::nboundchgs, NULL, SCIP_Tree::path, SCIP_Tree::pathlen, SCIP_ConflictSet::relaxedbds, SCIP_Bool, SCIP_BOUNDTYPE_LOWER, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIPbdchginfoGetBoundtype(), SCIPbdchginfoGetDepth(), SCIPbdchginfoGetNewbound(), SCIPbdchginfoGetPos(), SCIPbdchginfoGetRelaxedBound(), SCIPbdchginfoGetVar(), SCIPbdchginfoHasInferenceReason(), SCIPbdchginfoIsRedundant(), SCIPdebugCheckConflictFrontier, SCIPpqueueNElems(), SCIPsetAllocBufferArray, SCIPsetDebugMsg, SCIPsetFreeBufferArray, SCIPtreeGetCurrentDepth(), SCIPtreeGetFocusDepth(), SCIPvarGetLbGlobal(), SCIPvarGetName(), SCIPvarGetUbGlobal(), SCIPvarIsActive(), and TRUE.

Referenced by conflictAnalyzeRemainingBdchgs(), and SCIPconflictAnalyze().

SCIPconflictAnalyze()

SCIP_RETCODE SCIPconflictAnalyze	(	SCIP_CONFLICT *	conflict,
		BMS_BLKMEM *	blkmem,
		SCIP_SET *	set,
		SCIP_STAT *	stat,
		SCIP_PROB *	prob,
		SCIP_TREE *	tree,
		int	validdepth,
		SCIP_Bool *	success
	)

analyzes conflicting bound changes that were added with calls to SCIPconflictAddBound(), and on success, calls the conflict handlers to create a conflict constraint out of the resulting conflict set; updates statistics for propagation conflict analysis

Parameters

conflict	conflict analysis data
blkmem	block memory of transformed problem
set	global SCIP settings
stat	problem statistics
prob	problem data
tree	branch and bound tree
validdepth	minimal depth level at which the initial conflict set is valid
success	pointer to store whether a conflict constraint was created, or NULL

Definition at line 5626 of file conflict.c.

References SCIP_Conflict::bdchgqueue, conflictAnalyze(), conflictCalcMaxsize(), SCIP_Conflict::conflictset, FALSE, SCIP_Conflict::forcedbdchgqueue, SCIP_ConflictSet::nbdchginfos, SCIP_Conflict::npropcalls, SCIP_Conflict::npropconfconss, SCIP_Conflict::npropconfliterals, SCIP_Conflict::npropreconvconss, SCIP_Conflict::npropreconvliterals, SCIP_Conflict::npropsuccess, NULL, SCIP_Conflict::propanalyzetime, SCIP_CALL, SCIP_OKAY, SCIPclockStart(), SCIPclockStop(), SCIPconflictApplicable(), SCIPpqueueNElems(), SCIPsetDebugMsg, SCIPtreeGetCurrentDepth(), and TRUE.

Referenced by SCIPanalyzeConflict(), and SCIPanalyzeConflictCons().

SCIPconflictGetGlobalApplTime()

SCIP_Real SCIPconflictGetGlobalApplTime

(

SCIP_CONFLICT *

conflict

)

gets time in seconds used for preprocessing global conflict constraint before appliance

Parameters

conflict

conflict analysis data

Definition at line 5684 of file conflict.c.

References SCIP_Conflict::dIBclock, NULL, and SCIPclockGetTime().

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetPropTime()

SCIP_Real SCIPconflictGetPropTime

(

SCIP_CONFLICT *

conflict

)

gets time in seconds used for analyzing propagation conflicts

Parameters

conflict

conflict analysis data

Definition at line 5694 of file conflict.c.

References NULL, SCIP_Conflict::propanalyzetime, and SCIPclockGetTime().

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNPropCalls()

SCIP_Longint SCIPconflictGetNPropCalls

(

SCIP_CONFLICT *

conflict

)

gets number of calls to propagation conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 5704 of file conflict.c.

References SCIP_Conflict::npropcalls, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNPropSuccess()

SCIP_Longint SCIPconflictGetNPropSuccess

(

SCIP_CONFLICT *

conflict

)

gets number of calls to propagation conflict analysis that yield at least one conflict constraint

Parameters

conflict

conflict analysis data

Definition at line 5714 of file conflict.c.

References SCIP_Conflict::npropsuccess, and NULL.

Referenced by SCIPprintConflictStatistics(), and SCIPsolveCIP().

SCIPconflictGetNPropConflictConss()

SCIP_Longint SCIPconflictGetNPropConflictConss

(

SCIP_CONFLICT *

conflict

)

gets number of conflict constraints detected in propagation conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 5724 of file conflict.c.

References SCIP_Conflict::npropconfconss, and NULL.

Referenced by SCIPgetNConflictConssFound(), and SCIPprintConflictStatistics().

SCIPconflictGetNPropConflictLiterals()

SCIP_Longint SCIPconflictGetNPropConflictLiterals

(

SCIP_CONFLICT *

conflict

)

gets total number of literals in conflict constraints created in propagation conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 5734 of file conflict.c.

References SCIP_Conflict::npropconfliterals, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNPropReconvergenceConss()

SCIP_Longint SCIPconflictGetNPropReconvergenceConss

(

SCIP_CONFLICT *

conflict

)

gets number of reconvergence constraints detected in propagation conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 5744 of file conflict.c.

References SCIP_Conflict::npropreconvconss, and NULL.

Referenced by SCIPgetNConflictConssFound(), and SCIPprintConflictStatistics().

SCIPconflictGetNPropReconvergenceLiterals()

SCIP_Longint SCIPconflictGetNPropReconvergenceLiterals

(

SCIP_CONFLICT *

conflict

)

gets total number of literals in reconvergence constraints created in propagation conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 5754 of file conflict.c.

References SCIP_Conflict::npropreconvliterals, and NULL.

Referenced by SCIPprintConflictStatistics().

ensureSidechgsSize()

static SCIP_RETCODE ensureSidechgsSize ( SCIP_SET *  set, int **  sidechginds, SCIP_Real **  sidechgoldlhss, SCIP_Real **  sidechgoldrhss, SCIP_Real **  sidechgnewlhss, SCIP_Real **  sidechgnewrhss, int *  sidechgssize, int  num  )

static

ensures, that side change arrays can store at least num entries

Parameters

set	global SCIP settings
sidechginds	pointer to side change index array
sidechgoldlhss	pointer to side change old left hand sides array
sidechgoldrhss	pointer to side change old right hand sides array
sidechgnewlhss	pointer to side change new left hand sides array
sidechgnewrhss	pointer to side change new right hand sides array
sidechgssize	pointer to size of side change arrays
num	minimal number of entries to be able to store in side change arrays

Definition at line 5772 of file conflict.c.

References NULL, SCIP_CALL, SCIP_OKAY, SCIPsetCalcMemGrowSize(), and SCIPsetReallocBufferArray.

Referenced by addSideRemoval().

addSideRemoval()

static SCIP_RETCODE addSideRemoval ( SCIP_SET *  set, SCIP_ROW *  row, SCIP_Real  lpiinfinity, int **  sidechginds, SCIP_Real **  sidechgoldlhss, SCIP_Real **  sidechgoldrhss, SCIP_Real **  sidechgnewlhss, SCIP_Real **  sidechgnewrhss, int *  sidechgssize, int *  nsidechgs  )

static

adds removal of row's side to side change arrays; finite sides are only replaced by near infinite sides, such that the row's sense in the LP solver is not changed

Parameters

set	global SCIP settings
row	LP row to change the sides for
lpiinfinity	value treated as infinity in LP solver
sidechginds	pointer to side change index array
sidechgoldlhss	pointer to side change old left hand sides array
sidechgoldrhss	pointer to side change old right hand sides array
sidechgnewlhss	pointer to side change new left hand sides array
sidechgnewrhss	pointer to side change new right hand sides array
sidechgssize	pointer to size of side change arrays
nsidechgs	pointer to number of used slots in side change arrays

Definition at line 5811 of file conflict.c.

References ensureSidechgsSize(), NULL, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIProwGetConstant(), SCIProwGetLhs(), SCIProwGetLPPos(), SCIProwGetRhs(), and SCIPsetIsInfinity().

Referenced by runBoundHeuristic().

addBdchg()

static SCIP_RETCODE addBdchg ( SCIP_SET *  set, SCIP_VAR *  var, SCIP_Real  newlb, SCIP_Real  newub, SCIP_LPBDCHGS *  oldlpbdchgs, SCIP_LPBDCHGS *  relaxedlpbdchgs, SCIP_LPI *  lpi  )

static

inserts variable's new bounds into bound change arrays

Parameters

set	global SCIP settings
var	variable to change the LP bounds for
newlb	new lower bound
newub	new upper bound
oldlpbdchgs	old LP bound changes used for reset the LP bound change
relaxedlpbdchgs	relaxed LP bound changes used for reset the LP bound change
lpi	pointer to LPi to access infinity of LP solver; necessary to set correct value

Definition at line 5880 of file conflict.c.

References SCIP_LPBdChgs::bdchgcolinds, SCIP_LPBdChgs::bdchginds, SCIP_LPBdChgs::bdchglbs, SCIP_LPBdChgs::bdchgubs, SCIP_LPBdChgs::nbdchgs, NULL, SCIP_OKAY, SCIP_VARSTATUS_COLUMN, SCIPcolGetLPPos(), SCIPlpiInfinity(), SCIPlpiIsInfinity(), SCIPsetIsEQ(), SCIPsetIsInfinity(), SCIPvarGetCol(), SCIPvarGetLbLP(), SCIPvarGetStatus(), SCIPvarGetUbLP(), TRUE, and SCIP_LPBdChgs::usedcols.

Referenced by undoBdchgsProof().

ensureCandsSize()

static SCIP_RETCODE ensureCandsSize ( SCIP_SET *  set, SCIP_VAR ***  cands, SCIP_Real **  candscores, SCIP_Real **  newbounds, SCIP_Real **  proofactdeltas, int *  candssize, int  num  )

static

ensures, that candidate array can store at least num entries

Parameters

set	global SCIP settings
cands	pointer to candidate array
candscores	pointer to candidate score array
newbounds	pointer to candidate new bounds array
proofactdeltas	pointer to candidate proof delta array
candssize	pointer to size of array
num	minimal number of candidates to store in array

Definition at line 5961 of file conflict.c.

References NULL, SCIP_CALL, SCIP_OKAY, SCIPsetCalcMemGrowSize(), and SCIPsetReallocBufferArray.

Referenced by addCand().

addCand()

static SCIP_RETCODE addCand ( SCIP_SET *  set, int  currentdepth, SCIP_VAR *  var, int  lbchginfopos, int  ubchginfopos, SCIP_Real  proofcoef, SCIP_Real  prooflhs, SCIP_Real  proofact, SCIP_VAR ***  cands, SCIP_Real **  candscores, SCIP_Real **  newbounds, SCIP_Real **  proofactdeltas, int *  candssize, int *  ncands, int  firstcand  )

static

adds variable to candidate list, if the current best bound corresponding to the proof coefficient is local; returns the array position in the candidate list, where the new candidate was inserted, or -1 if the variable can relaxed to global bounds immediately without increasing the proof's activity; the candidates are sorted with respect to the following two criteria:

• prefer bound changes that have been applied deeper in the tree, to get a more global conflict
• prefer variables with small Farkas coefficient to get rid of as many bound changes as possible

Parameters

set	global SCIP settings
currentdepth	current depth in the tree
var	variable to add to candidate array
lbchginfopos	positions of currently active lower bound change information in variable's array
ubchginfopos	positions of currently active upper bound change information in variable's array
proofcoef	coefficient of variable in infeasibility/bound proof
prooflhs	left hand side of infeasibility/bound proof
proofact	activity of infeasibility/bound proof row
cands	pointer to candidate array for undoing bound changes
candscores	pointer to candidate score array for undoing bound changes
newbounds	pointer to candidate new bounds array for undoing bound changes
proofactdeltas	pointer to proof activity increase array for undoing bound changes
candssize	pointer to size of cands arrays
ncands	pointer to count number of candidates in bound change list
firstcand	position of first unprocessed bound change candidate

Definition at line 5998 of file conflict.c.

References SCIP_BdChgInfo::bdchgidx, bdchginfoIsResolvable(), calcBdchgScore(), SCIP_BdChgIdx::depth, ensureCandsSize(), FALSE, SCIP_Var::lbchginfos, SCIP_BdChgInfo::newbound, SCIP_Var::nlbchginfos, SCIP_Var::nubchginfos, NULL, SCIP_BdChgInfo::oldbound, QUAD, QUAD_TO_DBL, SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIPquadprecProdQD, SCIPquadprecSumDD, SCIPsetDebugMsg, SCIPsetIsGT(), SCIPsetIsZero(), SCIPvarGetLbLocal(), SCIPvarGetLbLP(), SCIPvarGetName(), SCIPvarGetUbLocal(), SCIPvarGetUbLP(), SCIPvarIsBinary(), and SCIP_Var::ubchginfos.

Referenced by undoBdchgsProof().

skipRedundantBdchginfos()

static void skipRedundantBdchginfos ( SCIP_VAR *  var, int *  lbchginfopos, int *  ubchginfopos  )

static

after changing the global bound of a variable, the bdchginfos that are now redundant are replaced with oldbound = newbound = global bound; if the current bdchginfo is of such kind, the bound is equal to the global bound and we can ignore it by installing a -1 as the corresponding bound change info position

Parameters

var	problem variable
lbchginfopos	pointer to lower bound change information position
ubchginfopos	pointer to upper bound change information position

Definition at line 6134 of file conflict.c.

References SCIP_Var::lbchginfos, SCIP_BdChgInfo::newbound, SCIP_Var::nlbchginfos, SCIP_Var::nubchginfos, NULL, SCIP_BdChgInfo::oldbound, SCIP_BdChgInfo::redundant, SCIPvarGetLbGlobal(), SCIPvarGetUbGlobal(), and SCIP_Var::ubchginfos.

Referenced by undoBdchgsProof().

undoBdchgsProof()

static SCIP_RETCODE undoBdchgsProof ( SCIP_SET *  set, SCIP_PROB *  prob, int  currentdepth, SCIP_Real *  proofcoefs, SCIP_Real  prooflhs, SCIP_Real *  proofact, SCIP_Real *  curvarlbs, SCIP_Real *  curvarubs, int *  lbchginfoposs, int *  ubchginfoposs, SCIP_LPBDCHGS *  oldlpbdchgs, SCIP_LPBDCHGS *  relaxedlpbdchgs, SCIP_Bool *  resolve, SCIP_LPI *  lpi  )

static

undoes bound changes on variables, still leaving the given infeasibility proof valid

Parameters

set	global SCIP settings
prob	problem data
currentdepth	current depth in the tree
proofcoefs	coefficients in infeasibility proof
prooflhs	left hand side of proof
proofact	current activity of proof
curvarlbs	current lower bounds of active problem variables
curvarubs	current upper bounds of active problem variables
lbchginfoposs	positions of currently active lower bound change information in variables' arrays
ubchginfoposs	positions of currently active upper bound change information in variables' arrays
oldlpbdchgs	old LP bound changes used for reset the LP bound change, or NULL
relaxedlpbdchgs	relaxed LP bound changes used for reset the LP bound change, or NULL
resolve	pointer to store whether the changed LP should be resolved again, or NULL
lpi	pointer to LPi to access infinity of LP solver; necessary to set correct values

Definition at line 6166 of file conflict.c.

References addBdchg(), addCand(), FALSE, NULL, SCIP_Prob::nvars, QUAD, QUAD_TO_DBL, SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIPquadprecProdQD, SCIPquadprecSumDD, SCIPsetAllocBufferArray, SCIPsetDebugMsg, SCIPsetFreeBufferArray, SCIPsetIsEQ(), SCIPsetIsFeasGT(), SCIPsetIsGT(), SCIPsetIsLT(), SCIPsetIsNegative(), SCIPsetIsPositive(), SCIPsetIsZero(), SCIPvarGetLbGlobal(), SCIPvarGetName(), SCIPvarGetProbindex(), SCIPvarGetUbGlobal(), SCIPvarIsInLP(), skipRedundantBdchginfos(), TRUE, and SCIP_Prob::vars.

Referenced by SCIPconflictAnalyzePseudo(), undoBdchgsDualfarkas(), and undoBdchgsDualsol().

undoBdchgsDualfarkas()

static SCIP_RETCODE undoBdchgsDualfarkas ( SCIP_SET *  set, SCIP_PROB *  prob, SCIP_LP *  lp, int  currentdepth, SCIP_Real *  curvarlbs, SCIP_Real *  curvarubs, int *  lbchginfoposs, int *  ubchginfoposs, SCIP_LPBDCHGS *  oldlpbdchgs, SCIP_LPBDCHGS *  relaxedlpbdchgs, SCIP_Bool *  valid, SCIP_Bool *  resolve, SCIP_Real *  farkascoefs, SCIP_Real  farkaslhs, SCIP_Real *  farkasactivity  )

static

analyzes an infeasible LP and undoes additional bound changes while staying infeasible

Parameters

set	global SCIP settings
prob	problem data
lp	LP data
currentdepth	current depth in the tree
curvarlbs	current lower bounds of active problem variables
curvarubs	current upper bounds of active problem variables
lbchginfoposs	positions of currently active lower bound change information in variables' arrays
ubchginfoposs	positions of currently active upper bound change information in variables' arrays
oldlpbdchgs	old LP bound changes used for reset the LP bound change, or NULL
relaxedlpbdchgs	relaxed LP bound changes used for reset the LP bound change, or NULL
valid	pointer to store whether the unfixings are valid
resolve	pointer to store whether the changed LP should be resolved again
farkascoefs	coefficients in the proof constraint
farkaslhs	lhs of the proof constraint
farkasactivity	maximal activity of the proof constraint

Definition at line 6383 of file conflict.c.

References SCIP_Lp::cutoffbound, FALSE, SCIP_Lp::flushed, NULL, SCIP_CALL, SCIP_OKAY, SCIPlpGetLPI(), SCIPsetDebugMsg, SCIPsetIsFeasGT(), SCIP_Lp::solved, TRUE, and undoBdchgsProof().

Referenced by runBoundHeuristic().

undoBdchgsDualsol()

static SCIP_RETCODE undoBdchgsDualsol ( SCIP_SET *  set, SCIP_PROB *  prob, SCIP_LP *  lp, int  currentdepth, SCIP_Real *  curvarlbs, SCIP_Real *  curvarubs, int *  lbchginfoposs, int *  ubchginfoposs, SCIP_LPBDCHGS *  oldlpbdchgs, SCIP_LPBDCHGS *  relaxedlpbdchgs, SCIP_Bool *  valid, SCIP_Bool *  resolve, SCIP_Real *  dualcoefs, SCIP_Real  duallhs, SCIP_Real *  dualactivity  )

static

analyzes an LP exceeding the objective limit and undoes additional bound changes while staying beyond the objective limit

Parameters

set	global SCIP settings
prob	problem data
lp	LP data
currentdepth	current depth in the tree
curvarlbs	current lower bounds of active problem variables
curvarubs	current upper bounds of active problem variables
lbchginfoposs	positions of currently active lower bound change information in variables' arrays
ubchginfoposs	positions of currently active upper bound change information in variables' arrays
oldlpbdchgs	old LP bound changes used for reset the LP bound change, or NULL
relaxedlpbdchgs	relaxed LP bound changes used for reset the LP bound change, or NULL
valid	pointer to store whether the unfixings are valid
resolve	pointer to store whether the changed LP should be resolved again
dualcoefs	coefficients in the proof constraint
duallhs	lhs of the proof constraint
dualactivity	maximal activity of the proof constraint

Definition at line 6441 of file conflict.c.

References SCIP_Lp::cutoffbound, FALSE, SCIP_Lp::flushed, NULL, SCIP_CALL, SCIP_OKAY, SCIPlpGetLPI(), SCIPsetDebugMsg, SCIPsetIsFeasGT(), SCIP_Lp::solved, TRUE, and undoBdchgsProof().

Referenced by runBoundHeuristic().

conflictAnalyzeRemainingBdchgs()

static SCIP_RETCODE conflictAnalyzeRemainingBdchgs ( SCIP_CONFLICT *  conflict, BMS_BLKMEM *  blkmem, SCIP_SET *  set, SCIP_STAT *  stat, SCIP_PROB *  prob, SCIP_TREE *  tree, SCIP_Bool  diving, int *  lbchginfoposs, int *  ubchginfoposs, int *  nconss, int *  nliterals, int *  nreconvconss, int *  nreconvliterals  )

static

applies conflict analysis starting with given bound changes, that could not be undone during previous infeasibility analysis

Parameters

conflict	conflict analysis data
blkmem	block memory of transformed problem
set	global SCIP settings
stat	problem statistics
prob	problem data
tree	branch and bound tree
diving	are we in strong branching or diving mode?
lbchginfoposs	positions of currently active lower bound change information in variables' arrays
ubchginfoposs	positions of currently active upper bound change information in variables' arrays
nconss	pointer to store the number of generated conflict constraints
nliterals	pointer to store the number of literals in generated conflict constraints
nreconvconss	pointer to store the number of generated reconvergence constraints
nreconvliterals	pointer to store the number of literals generated reconvergence constraints

Definition at line 6498 of file conflict.c.

References conflictAddBound(), conflictAddConflictBound(), conflictAnalyze(), conflictCalcMaxsize(), conflictCreateTmpBdchginfo(), SCIP_Conflict::conflictset, SCIP_ConflictSet::conflicttype, FALSE, incVSIDS(), SCIP_Var::lbchginfos, SCIP_Var::nlbchginfos, SCIP_Var::nubchginfos, NULL, SCIP_Prob::nvars, SCIP_Bool, SCIP_BOUNDTYPE_LOWER, SCIP_BOUNDTYPE_UPPER, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIPbdchginfoGetBoundtype(), SCIPbdchginfoGetNewbound(), SCIPbdchginfoIsRedundant(), SCIPconflictInit(), SCIPsetDebugMsg, SCIPvarGetLbLocal(), SCIPvarGetLbLP(), SCIPvarGetName(), SCIPvarGetStatus(), SCIPvarGetType(), SCIPvarGetUbLocal(), SCIPvarGetUbLP(), SCIP_Var::ubchginfos, SCIP_ConflictSet::usescutoffbound, and SCIP_Prob::vars.

Referenced by conflictAnalyzeLP(), and SCIPconflictAnalyzePseudo().

addRowToAggrRow()

static SCIP_RETCODE addRowToAggrRow ( SCIP_SET *  set, SCIP_ROW *  row, SCIP_Real  weight, SCIP_AGGRROW *  aggrrow  )

static

adds a weighted LP row to an aggregation row

Parameters

set	global SCIP settings
row	LP row
weight	weight for scaling
aggrrow	aggregation row

Definition at line 6637 of file conflict.c.

References SCIP_Row::constant, SCIP_Row::lhs, SCIP_Row::local, SCIP_Row::lpdepth, NULL, SCIP_Row::rhs, SCIP_CALL, SCIP_OKAY, SCIPaggrRowAddRow(), SCIPaggrRowGetRhs(), SCIProwGetName(), SCIPsetDebugMsg, and SCIPsetIsInfinity().

Referenced by addLocalRows(), getDualProof(), and getFarkasProof().

checkDualFeasibility()

static SCIP_Bool checkDualFeasibility ( SCIP_SET *  set, SCIP_ROW *  row, SCIP_Real  weight, SCIP_Bool *  zerocontribution  )

static

checks validity of an LP row and a corresponding weight

Parameters

set	global SCIP settings
row	LP row
weight	weight for scaling
zerocontribution	pointer to store whether every row entry is zero within tolerances

Definition at line 6669 of file conflict.c.

References FALSE, SCIP_Row::len, SCIP_Row::lhs, QUAD_EPSILON, REALABS, SCIP_Row::rhs, SCIP_Bool, SCIProwGetName(), SCIPsetDebugMsg, SCIPsetIsDualfeasZero(), SCIPsetIsInfinity(), TRUE, and SCIP_Row::vals.

Referenced by addLocalRows(), getDualProof(), and getFarkasProof().

sortLocalRows()

static SCIP_RETCODE sortLocalRows ( SCIP_SET *  set, SCIP_AGGRROW *  aggrrow, SCIP_ROW **  rows, int *  rowinds, int *  rowdepth, int  nrows  )

static

sort local rows by increasing depth and number of nonzeros as tie-breaker

Parameters

set	global SCIP settings
aggrrow	aggregation row
rows	array of local rows
rowinds	array of row indices
rowdepth	array of LP depths
nrows	number of local rows

Definition at line 6717 of file conflict.c.

References SCIP_Row::len, NULL, SCIP_CALL, SCIP_OKAY, SCIPsetAllocBufferArray, SCIPsetFreeBufferArray, SCIPsortIntInt(), and SCIPsortIntIntInt().

Referenced by addLocalRows().

addLocalRows()

static SCIP_RETCODE addLocalRows ( SCIP_SET *  set, SCIP_PROB *  transprob, SCIP_LP *  lp, SCIP_AGGRROW *  proofrow, SCIP_ROW **  rows, SCIP_Real *  dualsols, int *  localrowinds, int *  localrowdepth, int  nlocalrows, SCIP_Real *  proofact, int *  validdepth, SCIP_Real *  curvarlbs, SCIP_Real *  curvarubs, SCIP_Bool *  valid  )

static

adds locally valid rows to the proof constraint

Parameters

set	global SCIP settings
transprob	transformed problem
lp	LP data
proofrow	aggregated row representing the proof
rows	array if locally valid rows
dualsols	dual solution vector
localrowinds	array of row indecies
localrowdepth	array of row depths
nlocalrows	number of local rows stored in rows array
proofact	pointer to store the activity of the proof constraint
validdepth	pointer to store the depth where the proof constraint is valid
curvarlbs	current lower bounds of active problem variables
curvarubs	current upper bounds of active problem variables
valid	pointer store whether the proof constraint is valid

Definition at line 6785 of file conflict.c.

References addRowToAggrRow(), aggrRowGetMinActivity(), checkDualFeasibility(), SCIP_Row::cols, FALSE, SCIP_Row::len, SCIP_Row::local, SCIP_Row::lpdepth, SCIP_Lp::lpirows, NULL, r, REALABS, SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIPaggrRowGetRhs(), SCIPaggrRowRemoveZeros(), SCIPsetDebugMsg, SCIPsetIsDualfeasZero(), SCIPsetIsGT(), SCIPsetIsInfinity(), SCIPsetIsLE(), sortLocalRows(), TRUE, and SCIP_Row::vals.

Referenced by getDualProof(), and getFarkasProof().

getFarkasProof()

static SCIP_RETCODE getFarkasProof ( SCIP_SET *  set, SCIP_PROB *  prob, SCIP_LP *  lp, SCIP_LPI *  lpi, SCIP_TREE *  tree, SCIP_AGGRROW *  farkasrow, SCIP_Real *  farkasact, int *  validdepth, SCIP_Real *  curvarlbs, SCIP_Real *  curvarubs, SCIP_Bool *  valid  )

static

calculates a Farkas proof from the current dual LP solution

Parameters

set	global SCIP settings
prob	transformed problem
lp	LP data
lpi	LPI data
tree	tree data
farkasrow	aggregated row representing the proof
farkasact	maximal activity of the proof constraint
validdepth	pointer to store the valid depth of the proof constraint
curvarlbs	current lower bounds of active problem variables
curvarubs	current upper bounds of active problem variables
valid	pointer store whether the proof constraint is valid

Definition at line 6926 of file conflict.c.

References addLocalRows(), addRowToAggrRow(), aggrRowGetMinActivity(), BMSclearMemoryArray, checkDualFeasibility(), SCIP_Row::cols, FALSE, SCIP_Lp::flushed, SCIP_Row::len, SCIP_Row::local, SCIP_Lp::lpirows, SCIP_Lp::nlpirows, NULL, NUMSTOP, r, REALABS, SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIPaggrRowGetRhs(), SCIPaggrRowRemoveZeros(), SCIPfreeBufferArrayNull, SCIPlpDivingObjChanged(), SCIPlpGetNRows(), SCIPlpGetRows(), SCIPlpiGetDualfarkas(), SCIPlpiHasDualRay(), SCIPlpiIsDualFeasible(), SCIPlpiIsObjlimExc(), SCIPlpiIsPrimalInfeasible(), SCIProwGetLPDepth(), SCIPsetAllocBufferArray, SCIPsetDebugMsg, SCIPsetFreeBufferArray, SCIPsetIsDualfeasZero(), SCIPsetIsFeasLE(), SCIPtreeGetFocusDepth(), SCIP_Lp::solved, TRUE, and SCIP_Row::vals.

Referenced by conflictAnalyzeLP(), and runBoundHeuristic().

getDualProof()

static SCIP_RETCODE getDualProof ( SCIP_SET *  set, SCIP_PROB *  transprob, SCIP_LP *  lp, SCIP_LPI *  lpi, SCIP_TREE *  tree, SCIP_AGGRROW *  farkasrow, SCIP_Real *  farkasact, int *  validdepth, SCIP_Real *  curvarlbs, SCIP_Real *  curvarubs, SCIP_Bool *  valid  )

static

calculates a Farkas proof from the current dual LP solution

Parameters

set	global SCIP settings
transprob	transformed problem
lp	LP data
lpi	LPI data
tree	tree data
farkasrow	aggregated row representing the proof
farkasact	maximal activity of the proof constraint
validdepth	pointer to store the valid depth of the proof constraint
curvarlbs	current lower bounds of active problem variables
curvarubs	current upper bounds of active problem variables
valid	pointer store whether the proof constraint is valid

Definition at line 7099 of file conflict.c.

References addLocalRows(), addRowToAggrRow(), aggrRowGetMinActivity(), checkDualFeasibility(), SCIP_Row::cols, SCIP_Lp::cutoffbound, debugPrintViolationInfo, FALSE, SCIP_Lp::flushed, SCIP_Row::len, SCIP_Row::local, SCIP_Lp::lpirows, SCIP_Lp::nlpirows, NULL, NUMSTOP, r, REALABS, SCIP_Bool, SCIP_CALL, SCIP_LPERROR, SCIP_OKAY, SCIP_Real, SCIPaggrRowAddObjectiveFunction(), SCIPaggrRowClear(), SCIPaggrRowGetRhs(), SCIPaggrRowRemoveZeros(), SCIPfreeBufferArrayNull, SCIPlpGetNCols(), SCIPlpGetNRows(), SCIPlpGetRows(), SCIPlpiGetObjval(), SCIPlpiGetSol(), SCIProwGetLPDepth(), SCIPsetAllocBufferArray, SCIPsetDebugMsg, SCIPsetFreeBufferArray, SCIPsetIsDualfeasZero(), SCIPsetIsFeasLE(), SCIPsetSumepsilon(), SCIPtreeGetFocusDepth(), SCIP_Lp::solved, TRUE, and SCIP_Row::vals.

Referenced by conflictAnalyzeLP(), and runBoundHeuristic().

tightenCoefficients()

static void tightenCoefficients ( SCIP_SET *  set, SCIP_PROOFSET *  proofset, int *  nchgcoefs, SCIP_Bool *  redundant  )

static

apply coefficient tightening

Parameters

set	global SCIP settings
proofset	proof set
nchgcoefs	pointer to store number of changed coefficients
redundant	pointer to store whether the proof set is redundant

Definition at line 7341 of file conflict.c.

References FALSE, SCIP_ProofSet::inds, MAX, SCIP_ProofSet::nnz, proofsetGetNVars(), proofsetGetRhs(), REALABS, SCIP_ProofSet::rhs, SCIP_Real, SCIPcutsTightenCoefficients(), SCIPsetDebugMsg, SCIPsetInfinity(), and SCIP_ProofSet::vals.

Referenced by separateAlternativeProofs(), and tightenDualproof().

separateAlternativeProofs()

static SCIP_RETCODE separateAlternativeProofs ( SCIP_CONFLICT *  conflict, SCIP_SET *  set, SCIP_STAT *  stat, SCIP_PROB *  transprob, SCIP_TREE *  tree, BMS_BLKMEM *  blkmem, SCIP_AGGRROW *  proofrow, SCIP_Real *  curvarlbs, SCIP_Real *  curvarubs, SCIP_CONFTYPE  conflicttype  )

static

try to generate alternative proofs by applying subadditive functions

Parameters

conflict	conflict analysis data
set	global SCIP settings
stat	dynamic SCIP statistics
transprob	transformed problem
tree	tree data
blkmem	block memory
proofrow	proof rows data
curvarlbs	current lower bounds of active problem variables
curvarubs	current upper bounds of active problem variables
conflicttype	type of the conflict

Definition at line 7383 of file conflict.c.

References aggrRowGetMinActivity(), ALLOWLOCAL, BOUNDSWITCH, conflictInsertProofset(), SCIP_ProofSet::conflicttype, MAX, MAXFRAC, MINFRAC, NULL, POSTPROCESS, proofsetAddSparseData(), proofsetCreate(), proofsetFree(), SCIP_Bool, SCIP_CALL, SCIP_CONFTYPE_ALTBNDPROOF, SCIP_CONFTYPE_ALTINFPROOF, SCIP_CONFTYPE_INFEASLP, SCIP_OKAY, SCIP_Real, SCIPaggrRowCalcEfficacyNorm(), SCIPaggrRowGetInds(), SCIPaggrRowGetNNz(), SCIPaggrRowGetProbvarValue(), SCIPaggrRowGetRhs(), SCIPcalcFlowCover(), SCIPcreateSol(), SCIPcutGenerationHeuristicCMIR(), SCIPfreeSol(), SCIPprobGetNVars(), SCIPprobGetVars(), SCIPsetAllocBufferArray, SCIPsetFreeBufferArray, SCIPsetInfinity(), SCIPsetIsPositive(), SCIPsolSetVal(), SCIPvarGetAvgSol(), tightenCoefficients(), and USEVBDS.

Referenced by tightenDualproof().

tightenDualproof()

static SCIP_RETCODE tightenDualproof ( SCIP_CONFLICT *  conflict, SCIP_SET *  set, SCIP_STAT *  stat, BMS_BLKMEM *  blkmem, SCIP_PROB *  transprob, SCIP_TREE *  tree, SCIP_AGGRROW *  proofrow, int  validdepth, SCIP_Real *  curvarlbs, SCIP_Real *  curvarubs, SCIP_Bool  initialproof  )

static

tighten a given infeasibility proof a^Tx <= b with minact > b w.r.t. local bounds

1) Apply cut generating functions

• c-MIR
• Flow-cover
• TODO: implement other subadditive functions 2) Remove continuous variables contributing with its global bound
• TODO: implement a variant of non-zero-cancellation

Parameters

conflict	conflict analysis data
set	global SCIP settings
stat	dynamic SCIP statistics
blkmem	block memory
transprob	transformed problem
tree	tree data
proofrow	aggregated row representing the proof
validdepth	depth where the proof is valid
curvarlbs	current lower bounds of active problem variables
curvarubs	current upper bounds of active problem variables
initialproof	do we analyze the initial reason of infeasibility?

Definition at line 7514 of file conflict.c.

References aggrRowGetMinActivity(), conflictInsertProofset(), SCIP_Conflict::conflictset, SCIP_ConflictSet::conflicttype, SCIP_ProofSet::conflicttype, debugPrintViolationInfo, eps, getMaxActivity(), SCIP_ProofSet::inds, SCIP_ProofSet::nnz, NULL, SCIP_Conflict::proofset, proofsetAddAggrrow(), proofsetCancelVarWithBound(), proofsetClear(), proofsetCreate(), proofsetFree(), proofsetGetInds(), proofsetGetNVars(), proofsetGetVals(), SCIP_ProofSet::rhs, SCIP_Bool, SCIP_CALL, SCIP_CONFTYPE_ALTBNDPROOF, SCIP_CONFTYPE_ALTINFPROOF, SCIP_CONFTYPE_BNDEXCEEDING, SCIP_CONFTYPE_INFEASLP, SCIP_OKAY, SCIP_Real, SCIP_VARTYPE_CONTINUOUS, SCIP_VARTYPE_IMPLINT, SCIPaggrRowGetInds(), SCIPaggrRowGetNNz(), SCIPaggrRowGetRhs(), SCIPprobGetVars(), SCIPsetDebugMsg, SCIPsetIsEQ(), SCIPsetIsInfinity(), SCIPsetIsZero(), SCIPvarGetLbGlobal(), SCIPvarGetName(), SCIPvarGetProbindex(), SCIPvarGetType(), SCIPvarGetUbGlobal(), SCIPvarIsBinary(), SCIPvarIsIntegral(), separateAlternativeProofs(), tightenCoefficients(), SCIP_ProofSet::validdepth, and SCIP_ProofSet::vals.

Referenced by conflictAnalyzeDualProof().

conflictAnalyzeDualProof()

static SCIP_RETCODE conflictAnalyzeDualProof ( SCIP_CONFLICT *  conflict, SCIP_SET *  set, SCIP_STAT *  stat, BMS_BLKMEM *  blkmem, SCIP_PROB *  origprob, SCIP_PROB *  transprob, SCIP_TREE *  tree, SCIP_REOPT *  reopt, SCIP_LP *  lp, SCIP_AGGRROW *  proofrow, int  validdepth, SCIP_Real *  curvarlbs, SCIP_Real *  curvarubs, SCIP_Bool  initialproof, SCIP_Bool *  globalinfeasible, SCIP_Bool *  success  )

static

perform conflict analysis based on a dual unbounded ray

given an aggregation of rows lhs <= a^Tx such that lhs > maxactivity. if the constraint has size one we add a bound change instead of the constraint.

Parameters

conflict	conflict analysis data
set	global SCIP settings
stat	dynamic SCIP statistics
blkmem	block memory
origprob	original problem
transprob	transformed problem
tree	tree data
reopt	reoptimization data
lp	LP data
proofrow	aggregated row representing the proof
validdepth	valid depth of the dual proof
curvarlbs	current lower bounds of active problem variables
curvarubs	current upper bounds of active problem variables
initialproof	do we analyze the initial reason of infeasibility?
globalinfeasible	pointer to store whether global infeasibility could be proven
success	pointer to store success result

Definition at line 7706 of file conflict.c.

References aggrRowGetMinActivity(), FALSE, SCIP_Conflict::ndualproofsinfsuccess, NULL, SCIP_Tree::path, SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIPaggrRowGetNNz(), SCIPaggrRowGetRhs(), SCIPnodeCutoff(), SCIPsetDebugMsg, SCIPsetIsFeasLE(), SCIPtreeGetFocusDepth(), tightenDualproof(), and TRUE.

Referenced by conflictAnalyzeLP(), and runBoundHeuristic().

runBoundHeuristic()

static SCIP_RETCODE runBoundHeuristic ( SCIP_CONFLICT *  conflict, SCIP_SET *  set, SCIP_STAT *  stat, SCIP_PROB *  origprob, SCIP_PROB *  transprob, SCIP_TREE *  tree, SCIP_REOPT *  reopt, SCIP_LP *  lp, SCIP_LPI *  lpi, BMS_BLKMEM *  blkmem, SCIP_Real *  proofcoefs, SCIP_Real *  prooflhs, SCIP_Real *  proofactivity, SCIP_Real *  curvarlbs, SCIP_Real *  curvarubs, int *  lbchginfoposs, int *  ubchginfoposs, int *  iterations, SCIP_Bool  marklpunsolved, SCIP_Bool *  dualproofsuccess, SCIP_Bool *  valid  )

static

try to find a subset of changed bounds leading to an infeasible LP

1. call undoBdchgsDualfarkas() or undoBdchgsDualsol() -> update lb/ubchginfoposs arrays -> store additional changes in bdchg and curvarlbs/ubs arrays -> apply additional changes to the LPI
2. (optional) if additional bound changes were undone: -> resolve LP -> goto 1.
3. redo all bound changes in the LPI to restore the LPI to its original state
4. analyze conflict -> put remaining changed bounds (see lb/ubchginfoposs arrays) into starting conflict set

Parameters

conflict	conflict data
set	global SCIP settings
stat	problem statistics
origprob	original problem
transprob	transformed problem
tree	branch and bound tree
reopt	reoptimization data
lp	LP data
lpi	LPI data
blkmem	block memory
proofcoefs	coefficients in the proof constraint
prooflhs	lhs of the proof constraint
proofactivity	maximal activity of the proof constraint
curvarlbs	current lower bounds of active problem variables
curvarubs	current upper bounds of active problem variables
lbchginfoposs	positions of currently active lower bound change information in variables' arrays
ubchginfoposs	positions of currently active upper bound change information in variables' arrays
iterations	pointer to store the total number of LP iterations used
marklpunsolved	whether LP should be marked unsolved after analysis (needed for strong branching)
dualproofsuccess	pointer to store success result of dual proof analysis
valid	pointer to store whether the result is still a valid proof

Definition at line 7797 of file conflict.c.

References addSideRemoval(), SCIP_LPBdChgs::bdchginds, SCIP_LPBdChgs::bdchglbs, SCIP_LPBdChgs::bdchgubs, BMSclearMemoryArray, conflictAnalyzeDualProof(), SCIP_Stat::conflictlptime, SCIP_Conflict::conflictset, SCIP_ConflictSet::conflicttype, SCIP_Lp::dualchecked, SCIP_Lp::dualfeasible, FALSE, getDualProof(), getFarkasProof(), lpbdchgsCreate(), lpbdchgsFree(), lpbdchgsReset(), SCIP_Lp::lpiitlim, SCIP_Lp::lpiobjlim, SCIP_Lp::lpobjval, SCIP_Lp::lpsolstat, SCIP_LPBdChgs::nbdchgs, SCIP_Stat::nconflictlpiterations, SCIP_Stat::nconflictlps, NULL, SCIP_Lp::primalchecked, SCIP_Lp::primalfeasible, r, SCIP_Bool, SCIP_CALL, SCIP_CONFTYPE_INFEASLP, SCIP_INVALID, SCIP_LPERROR, SCIP_LPPAR_LPITLIM, SCIP_LPPAR_OBJLIM, SCIP_LPSOLSTAT_NOTSOLVED, SCIP_OKAY, SCIP_Real, SCIPaggrRowCreate(), SCIPaggrRowFree(), SCIPaggrRowGetInds(), SCIPaggrRowGetNNz(), SCIPaggrRowGetProbvarValue(), SCIPaggrRowGetRhs(), SCIPclockStart(), SCIPclockStop(), SCIPlpDivingObjChanged(), SCIPlpGetNCols(), SCIPlpGetNRows(), SCIPlpGetRows(), SCIPlpiChgBounds(), SCIPlpiChgSides(), SCIPlpiGetIterations(), SCIPlpiGetObjval(), SCIPlpiInfinity(), SCIPlpiIsDualFeasible(), SCIPlpiIsObjlimExc(), SCIPlpiIsPrimalInfeasible(), SCIPlpiSetIntpar(), SCIPlpiSetRealpar(), SCIPlpiSolveDual(), SCIPprobAllColsInLP(), SCIPprobGetNVars(), SCIPprobGetVars(), SCIProwGetLhs(), SCIProwGetLPPos(), SCIProwGetName(), SCIProwGetRhs(), SCIProwIsLocal(), SCIPsetAllocBufferArray, SCIPsetDebugMsg, SCIPsetFreeBufferArray, SCIPtreeGetCurrentDepth(), SCIPtreeGetEffectiveRootDepth(), SCIPvarGetProbindex(), SCIP_Lp::solved, undoBdchgsDualfarkas(), and undoBdchgsDualsol().

Referenced by conflictAnalyzeLP().

conflictAnalyzeLP()

static SCIP_RETCODE conflictAnalyzeLP ( SCIP_CONFLICT *  conflict, SCIP_CONFLICTSTORE *  conflictstore, BMS_BLKMEM *  blkmem, SCIP_SET *  set, SCIP_STAT *  stat, SCIP_PROB *  transprob, SCIP_PROB *  origprob, SCIP_TREE *  tree, SCIP_REOPT *  reopt, SCIP_LP *  lp, SCIP_BRANCHCAND *  branchcand, SCIP_EVENTQUEUE *  eventqueue, SCIP_CLIQUETABLE *  cliquetable, SCIP_Bool  diving, SCIP_Bool *  dualproofsuccess, int *  iterations, int *  nconss, int *  nliterals, int *  nreconvconss, int *  nreconvliterals, SCIP_Bool  marklpunsolved  )

static

actually performs analysis of infeasible LP

Parameters

conflict	conflict analysis data
conflictstore	conflict store
blkmem	block memory of transformed problem
set	global SCIP settings
stat	problem statistics
transprob	transformed problem
origprob	original problem
tree	branch and bound tree
reopt	reoptimization data structure
lp	LP data
branchcand	branching candidate storage
eventqueue	event queue
cliquetable	clique table data structure
diving	are we in strong branching or diving mode?
dualproofsuccess	pointer to store success result of dual proof analysis
iterations	pointer to store the total number of LP iterations used
nconss	pointer to store the number of generated conflict constraints
nliterals	pointer to store the number of literals in generated conflict constraints
nreconvconss	pointer to store the number of generated reconvergence constraints
nreconvliterals	pointer to store the number of literals generated reconvergence constraints
marklpunsolved	whether LP should be marked unsolved after analysis (needed for strong branching)

Definition at line 8174 of file conflict.c.

References BMSclearMemoryArray, conflictAnalyzeDualProof(), conflictAnalyzeRemainingBdchgs(), conflictFlushProofset(), SCIP_Stat::conflictlptime, SCIP_Conflict::conflictset, SCIP_ConflictSet::conflicttype, FALSE, SCIP_Lp::flushed, getDualProof(), getFarkasProof(), SCIP_Lp::lpiitlim, SCIP_Lp::lpiobjlim, SCIP_Stat::nconflictlpiterations, SCIP_Stat::nconflictlps, SCIP_Conflict::nconflictsets, SCIP_Var::nlbchginfos, SCIP_Conflict::nproofsets, SCIP_Var::nubchginfos, NULL, SCIP_Prob::nvars, SCIP_Conflict::proofset, proofsetGetNVars(), runBoundHeuristic(), SCIP_Bool, SCIP_CALL, SCIP_CONFTYPE_BNDEXCEEDING, SCIP_CONFTYPE_INFEASLP, SCIP_LPERROR, SCIP_LPPAR_LPITLIM, SCIP_LPPAR_OBJLIM, SCIP_OKAY, SCIP_Real, SCIPaggrRowCreate(), SCIPaggrRowFree(), SCIPaggrRowGetInds(), SCIPaggrRowGetNNz(), SCIPaggrRowGetProbvarValue(), SCIPaggrRowGetRhs(), SCIPclockStart(), SCIPclockStop(), SCIPconflictFlushConss(), SCIPlpDivingObjChanged(), SCIPlpGetLPI(), SCIPlpiGetIterations(), SCIPlpiGetObjval(), SCIPlpiGetRealpar(), SCIPlpiInfinity(), SCIPlpiIsDualFeasible(), SCIPlpiIsObjlimExc(), SCIPlpiIsOptimal(), SCIPlpiIsPrimalInfeasible(), SCIPlpiSetIntpar(), SCIPlpiSetRealpar(), SCIPlpiSolveDual(), SCIPprobAllColsInLP(), SCIPprobGetNVars(), SCIPsetAllocBufferArray, SCIPsetDebugMsg, SCIPsetFreeBufferArray, SCIPsetIsEQ(), SCIPsetIsGT(), SCIPsetIsLT(), SCIPtreeGetCurrentDepth(), SCIPtreeGetEffectiveRootDepth(), SCIPvarGetLbLocal(), SCIPvarGetLbLP(), SCIPvarGetProbindex(), SCIPvarGetUbLocal(), SCIPvarGetUbLP(), SCIP_Lp::solved, TRUE, and SCIP_Prob::vars.

Referenced by conflictAnalyzeBoundexceedingLP(), conflictAnalyzeInfeasibleLP(), and SCIPconflictAnalyzeStrongbranch().

conflictAnalyzeInfeasibleLP()

static SCIP_RETCODE conflictAnalyzeInfeasibleLP ( SCIP_CONFLICT *  conflict, SCIP_CONFLICTSTORE *  conflictstore, BMS_BLKMEM *  blkmem, SCIP_SET *  set, SCIP_STAT *  stat, SCIP_PROB *  transprob, SCIP_PROB *  origprob, SCIP_TREE *  tree, SCIP_REOPT *  reopt, SCIP_LP *  lp, SCIP_BRANCHCAND *  branchcand, SCIP_EVENTQUEUE *  eventqueue, SCIP_CLIQUETABLE *  cliquetable, SCIP_Bool *  success  )

static

analyzes an infeasible LP to find out the bound changes on variables that were responsible for the infeasibility; on success, calls standard conflict analysis with the responsible variables as starting conflict set, thus creating a conflict constraint out of the resulting conflict set; updates statistics for infeasible LP conflict analysis

Parameters

conflict	conflict analysis data
conflictstore	conflict store
blkmem	block memory of transformed problem
set	global SCIP settings
stat	problem statistics
transprob	transformed problem
origprob	original problem
tree	branch and bound tree
reopt	reoptimization data structure
lp	LP data
branchcand	branching candidate storage
eventqueue	event queue
cliquetable	clique table data structure
success	pointer to store whether a conflict constraint was created, or NULL

Definition at line 8491 of file conflict.c.

References conflictAnalyzeLP(), SCIP_Conflict::conflictset, SCIP_ConflictSet::conflicttype, FALSE, SCIP_Conflict::inflpanalyzetime, SCIP_Conflict::ndualproofsinfsuccess, SCIP_Conflict::ninflpcalls, SCIP_Conflict::ninflpconfconss, SCIP_Conflict::ninflpconfliterals, SCIP_Conflict::ninflpiterations, SCIP_Conflict::ninflpreconvconss, SCIP_Conflict::ninflpreconvliterals, SCIP_Conflict::ninflpsuccess, NULL, SCIP_Bool, SCIP_CALL, SCIP_CONFTYPE_INFEASLP, SCIP_Longint, SCIP_OKAY, SCIPclockStart(), SCIPclockStop(), SCIPlpDiving(), SCIPlpDivingObjChanged(), SCIPlpGetSolstat(), SCIPprobAllColsInLP(), SCIPsetDebugMsg, SCIPtreeGetCurrentDepth(), and TRUE.

Referenced by SCIPconflictAnalyzeLP().

conflictAnalyzeBoundexceedingLP()

static SCIP_RETCODE conflictAnalyzeBoundexceedingLP ( SCIP_CONFLICT *  conflict, SCIP_CONFLICTSTORE *  conflictstore, BMS_BLKMEM *  blkmem, SCIP_SET *  set, SCIP_STAT *  stat, SCIP_PROB *  transprob, SCIP_PROB *  origprob, SCIP_TREE *  tree, SCIP_REOPT *  reopt, SCIP_LP *  lp, SCIP_BRANCHCAND *  branchcand, SCIP_EVENTQUEUE *  eventqueue, SCIP_CLIQUETABLE *  cliquetable, SCIP_Bool *  success  )

static

analyzes a bound exceeding LP to find out the bound changes on variables that were responsible for exceeding the primal bound; on success, calls standard conflict analysis with the responsible variables as starting conflict set, thus creating a conflict constraint out of the resulting conflict set; updates statistics for bound exceeding LP conflict analysis

Parameters

conflict	conflict analysis data
conflictstore	conflict store
blkmem	block memory of transformed problem
set	global SCIP settings
stat	problem statistics
transprob	transformed problem
origprob	original problem
tree	branch and bound tree
reopt	reoptimization data structure
lp	LP data
branchcand	branching candidate storage
eventqueue	event queue
cliquetable	clique table data structure
success	pointer to store whether a conflict constraint was created, or NULL

Definition at line 8567 of file conflict.c.

References SCIP_Conflict::boundlpanalyzetime, conflictAnalyzeLP(), SCIP_Conflict::conflictset, SCIP_ConflictSet::conflicttype, FALSE, SCIP_Conflict::nboundlpcalls, SCIP_Conflict::nboundlpconfconss, SCIP_Conflict::nboundlpconfliterals, SCIP_Conflict::nboundlpiterations, SCIP_Conflict::nboundlpreconvconss, SCIP_Conflict::nboundlpreconvliterals, SCIP_Conflict::nboundlpsuccess, SCIP_Conflict::ndualproofsbndsuccess, SCIP_Conflict::ndualproofsinfsuccess, NULL, SCIP_Bool, SCIP_CALL, SCIP_CONFTYPE_BNDEXCEEDING, SCIP_Longint, SCIP_OKAY, SCIPclockStart(), SCIPclockStop(), SCIPlpDiving(), SCIPlpDivingObjChanged(), SCIPlpGetSolstat(), SCIPprobAllColsInLP(), SCIPsetDebugMsg, SCIPtreeGetCurrentDepth(), TRUE, and SCIP_ConflictSet::usescutoffbound.

Referenced by SCIPconflictAnalyzeLP().

SCIPconflictAnalyzeLP()

SCIP_RETCODE SCIPconflictAnalyzeLP	(	SCIP_CONFLICT *	conflict,
		SCIP_CONFLICTSTORE *	conflictstore,
		BMS_BLKMEM *	blkmem,
		SCIP_SET *	set,
		SCIP_STAT *	stat,
		SCIP_PROB *	transprob,
		SCIP_PROB *	origprob,
		SCIP_TREE *	tree,
		SCIP_REOPT *	reopt,
		SCIP_LP *	lp,
		SCIP_BRANCHCAND *	branchcand,
		SCIP_EVENTQUEUE *	eventqueue,
		SCIP_CLIQUETABLE *	cliquetable,
		SCIP_Bool *	success
	)

analyzes an infeasible or bound exceeding LP to find out the bound changes on variables that were responsible for the infeasibility or for exceeding the primal bound; on success, calls standard conflict analysis with the responsible variables as starting conflict set, thus creating a conflict constraint out of the resulting conflict set; updates statistics for infeasible or bound exceeding LP conflict analysis; may only be called if SCIPprobAllColsInLP()

Parameters

conflict	conflict analysis data
conflictstore	conflict store
blkmem	block memory of transformed problem
set	global SCIP settings
stat	problem statistics
transprob	transformed problem
origprob	original problem
tree	branch and bound tree
reopt	reoptimization data structure
lp	LP data
branchcand	branching candidate storage
eventqueue	event queue
cliquetable	clique table data structure
success	pointer to store whether a conflict constraint was created, or NULL

Definition at line 8646 of file conflict.c.

References SCIP_RowSolVals::activity, SCIP_Row::activity, SCIP_ColSolVals::basisstatus, SCIP_RowSolVals::basisstatus, SCIP_Col::basisstatus, SCIP_Row::basisstatus, SCIP_Lp::cols, conflictAnalyzeBoundexceedingLP(), conflictAnalyzeInfeasibleLP(), SCIP_LpSolVals::dualchecked, SCIP_Lp::dualchecked, SCIP_Row::dualfarkas, SCIP_LpSolVals::dualfeasible, SCIP_Lp::dualfeasible, SCIP_RowSolVals::dualsol, SCIP_Row::dualsol, FALSE, SCIP_Lp::flushed, SCIP_LpSolVals::lpissolved, SCIP_LpSolVals::lpobjval, SCIP_Lp::lpobjval, SCIP_LpSolVals::lpsolstat, SCIP_Lp::lpsolstat, SCIP_Lp::ncols, SCIP_Lp::nrows, NULL, SCIP_LpSolVals::primalchecked, SCIP_Lp::primalchecked, SCIP_LpSolVals::primalfeasible, SCIP_Lp::primalfeasible, SCIP_ColSolVals::primsol, SCIP_Col::primsol, r, SCIP_ColSolVals::redcost, SCIP_Col::redcost, SCIP_Lp::rows, SCIP_CALL, SCIP_LPSOLSTAT_INFEASIBLE, SCIP_LPSOLSTAT_NOTSOLVED, SCIP_LPSOLSTAT_OBJLIMIT, SCIP_LPSOLSTAT_OPTIMAL, SCIP_OKAY, SCIPlpGetLPI(), SCIPlpGetSolstat(), SCIPlpiIsPrimalInfeasible(), SCIPlpiWasSolved(), SCIPprobAllColsInLP(), SCIPsetAllocBufferArray, SCIPsetFreeBufferArray, SCIP_LpSolVals::solisbasic, SCIP_Lp::solisbasic, and SCIP_Lp::solved.

Referenced by priceAndCutLoop(), SCIPsolveDiveLP(), and solveProbingLP().

SCIPconflictGetInfeasibleLPTime()

SCIP_Real SCIPconflictGetInfeasibleLPTime

(

SCIP_CONFLICT *

conflict

)

gets time in seconds used for analyzing infeasible LP conflicts

Parameters

conflict

conflict analysis data

Definition at line 8793 of file conflict.c.

References SCIP_Conflict::inflpanalyzetime, NULL, and SCIPclockGetTime().

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNInfeasibleLPCalls()

SCIP_Longint SCIPconflictGetNInfeasibleLPCalls

(

SCIP_CONFLICT *

conflict

)

gets number of calls to infeasible LP conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 8803 of file conflict.c.

References SCIP_Conflict::ninflpcalls, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNInfeasibleLPSuccess()

SCIP_Longint SCIPconflictGetNInfeasibleLPSuccess

(

SCIP_CONFLICT *

conflict

)

gets number of calls to infeasible LP conflict analysis that yield at least one conflict constraint

Parameters

conflict

conflict analysis data

Definition at line 8813 of file conflict.c.

References SCIP_Conflict::ninflpsuccess, and NULL.

Referenced by SCIPprintConflictStatistics(), and SCIPsolveCIP().

SCIPconflictGetNInfeasibleLPConflictConss()

SCIP_Longint SCIPconflictGetNInfeasibleLPConflictConss

(

SCIP_CONFLICT *

conflict

)

gets number of conflict constraints detected in infeasible LP conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 8823 of file conflict.c.

References SCIP_Conflict::ninflpconfconss, and NULL.

Referenced by SCIPgetNConflictConssFound(), and SCIPprintConflictStatistics().

SCIPconflictGetNInfeasibleLPConflictLiterals()

SCIP_Longint SCIPconflictGetNInfeasibleLPConflictLiterals

(

SCIP_CONFLICT *

conflict

)

gets total number of literals in conflict constraints created in infeasible LP conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 8833 of file conflict.c.

References SCIP_Conflict::ninflpconfliterals, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNInfeasibleLPReconvergenceConss()

SCIP_Longint SCIPconflictGetNInfeasibleLPReconvergenceConss

(

SCIP_CONFLICT *

conflict

)

gets number of reconvergence constraints detected in infeasible LP conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 8843 of file conflict.c.

References SCIP_Conflict::ninflpreconvconss, and NULL.

Referenced by SCIPgetNConflictConssFound(), and SCIPprintConflictStatistics().

SCIPconflictGetNInfeasibleLPReconvergenceLiterals()

SCIP_Longint SCIPconflictGetNInfeasibleLPReconvergenceLiterals

(

SCIP_CONFLICT *

conflict

)

gets total number of literals in reconvergence constraints created in infeasible LP conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 8853 of file conflict.c.

References SCIP_Conflict::ninflpreconvliterals, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNInfeasibleLPIterations()

SCIP_Longint SCIPconflictGetNInfeasibleLPIterations

(

SCIP_CONFLICT *

conflict

)

gets number of LP iterations in infeasible LP conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 8863 of file conflict.c.

References SCIP_Conflict::ninflpiterations, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetBoundexceedingLPTime()

SCIP_Real SCIPconflictGetBoundexceedingLPTime

(

SCIP_CONFLICT *

conflict

)

gets time in seconds used for analyzing bound exceeding LP conflicts

Parameters

conflict

conflict analysis data

Definition at line 8873 of file conflict.c.

References SCIP_Conflict::boundlpanalyzetime, NULL, and SCIPclockGetTime().

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNBoundexceedingLPCalls()

SCIP_Longint SCIPconflictGetNBoundexceedingLPCalls

(

SCIP_CONFLICT *

conflict

)

gets number of calls to bound exceeding LP conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 8883 of file conflict.c.

References SCIP_Conflict::nboundlpcalls, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNBoundexceedingLPSuccess()

SCIP_Longint SCIPconflictGetNBoundexceedingLPSuccess

(

SCIP_CONFLICT *

conflict

)

gets number of calls to bound exceeding LP conflict analysis that yield at least one conflict constraint

Parameters

conflict

conflict analysis data

Definition at line 8893 of file conflict.c.

References SCIP_Conflict::nboundlpsuccess, and NULL.

Referenced by SCIPprintConflictStatistics(), and SCIPsolveCIP().

SCIPconflictGetNBoundexceedingLPConflictConss()

SCIP_Longint SCIPconflictGetNBoundexceedingLPConflictConss

(

SCIP_CONFLICT *

conflict

)

gets number of conflict constraints detected in bound exceeding LP conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 8903 of file conflict.c.

References SCIP_Conflict::nboundlpconfconss, and NULL.

Referenced by SCIPgetNConflictConssFound(), and SCIPprintConflictStatistics().

SCIPconflictGetNBoundexceedingLPConflictLiterals()

SCIP_Longint SCIPconflictGetNBoundexceedingLPConflictLiterals

(

SCIP_CONFLICT *

conflict

)

gets total number of literals in conflict constraints created in bound exceeding LP conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 8913 of file conflict.c.

References SCIP_Conflict::nboundlpconfliterals, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNBoundexceedingLPReconvergenceConss()

SCIP_Longint SCIPconflictGetNBoundexceedingLPReconvergenceConss

(

SCIP_CONFLICT *

conflict

)

gets number of reconvergence constraints detected in bound exceeding LP conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 8923 of file conflict.c.

References SCIP_Conflict::nboundlpreconvconss, and NULL.

Referenced by SCIPgetNConflictConssFound(), and SCIPprintConflictStatistics().

SCIPconflictGetNBoundexceedingLPReconvergenceLiterals()

SCIP_Longint SCIPconflictGetNBoundexceedingLPReconvergenceLiterals

(

SCIP_CONFLICT *

conflict

)

gets total number of literals in reconvergence constraints created in bound exceeding LP conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 8933 of file conflict.c.

References SCIP_Conflict::nboundlpreconvliterals, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNBoundexceedingLPIterations()

SCIP_Longint SCIPconflictGetNBoundexceedingLPIterations

(

SCIP_CONFLICT *

conflict

)

gets number of LP iterations in bound exceeding LP conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 8943 of file conflict.c.

References SCIP_Conflict::nboundlpiterations, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictAnalyzeStrongbranch()

SCIP_RETCODE SCIPconflictAnalyzeStrongbranch	(	SCIP_CONFLICT *	conflict,
		SCIP_CONFLICTSTORE *	conflictstore,
		BMS_BLKMEM *	blkmem,
		SCIP_SET *	set,
		SCIP_STAT *	stat,
		SCIP_PROB *	transprob,
		SCIP_PROB *	origprob,
		SCIP_TREE *	tree,
		SCIP_REOPT *	reopt,
		SCIP_LP *	lp,
		SCIP_BRANCHCAND *	branchcand,
		SCIP_EVENTQUEUE *	eventqueue,
		SCIP_CLIQUETABLE *	cliquetable,
		SCIP_COL *	col,
		SCIP_Bool *	downconflict,
		SCIP_Bool *	upconflict
	)

analyses infeasible strong branching sub problems for conflicts

Parameters

conflict	conflict analysis data
conflictstore	conflict store
blkmem	block memory buffers
set	global SCIP settings
stat	dynamic problem statistics
transprob	transformed problem
origprob	original problem
tree	branch and bound tree
reopt	reoptimization data structure
lp	LP data
branchcand	branching candidate storage
eventqueue	event queue
cliquetable	clique table data structure
col	LP column with at least one infeasible strong branching subproblem
downconflict	pointer to store whether a conflict constraint was created for an infeasible downwards branch, or NULL
upconflict	pointer to store whether a conflict constraint was created for an infeasible upwards branch, or NULL

Definition at line 8960 of file conflict.c.

References conflictAnalyzeLP(), SCIP_Stat::conflictlptime, SCIP_Conflict::conflictset, SCIP_ConflictSet::conflicttype, SCIP_Lp::cutoffbound, FALSE, SCIP_Lp::flushed, SCIP_Col::lb, SCIP_Lp::lpi, SCIP_Col::lpipos, SCIP_Stat::nconflictlpiterations, SCIP_Stat::nconflictlps, SCIP_Lp::nlpicols, SCIP_Lp::nlpirows, SCIP_Conflict::nsbcalls, SCIP_Conflict::nsbconfconss, SCIP_Conflict::nsbconfliterals, SCIP_Conflict::nsbiterations, SCIP_Conflict::nsbreconvconss, SCIP_Conflict::nsbreconvliterals, SCIP_Conflict::nsbsuccess, NULL, SCIP_Col::primsol, SCIP_Conflict::sbanalyzetime, SCIP_Col::sbdown, SCIP_Col::sbdownvalid, SCIP_Col::sbup, SCIP_Col::sbupvalid, SCIP_Bool, SCIP_CALL, SCIP_CONFTYPE_INFEASLP, SCIP_LPERROR, SCIP_OKAY, SCIP_Real, SCIPclockStart(), SCIPclockStop(), SCIPcolGetVar(), SCIPlpiChgBounds(), SCIPlpiEndStrongbranch(), SCIPlpiGetBase(), SCIPlpiGetIterations(), SCIPlpiSetBase(), SCIPlpiSolveDual(), SCIPlpiStartStrongbranch(), SCIPprobAllColsInLP(), SCIPsetAllocBufferArray, SCIPsetDebugMsg, SCIPsetFeasCeil(), SCIPsetFeasFloor(), SCIPsetFreeBufferArray, SCIPsetIsGE(), SCIPtreeGetCurrentDepth(), SCIPvarGetLbLocal(), SCIPvarGetName(), SCIPvarGetUbLocal(), SCIP_Lp::solved, TRUE, and SCIP_Col::ub.

Referenced by analyzeStrongbranch().

SCIPconflictGetStrongbranchTime()

SCIP_Real SCIPconflictGetStrongbranchTime

(

SCIP_CONFLICT *

conflict

)

gets time in seconds used for analyzing infeasible strong branching conflicts

Parameters

conflict

conflict analysis data

Definition at line 9197 of file conflict.c.

References NULL, SCIP_Conflict::sbanalyzetime, and SCIPclockGetTime().

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNDualproofsInfSuccess()

SCIP_Longint SCIPconflictGetNDualproofsInfSuccess

(

SCIP_CONFLICT *

conflict

)

gets number of successful calls to dual proof analysis derived from infeasible LPs

Parameters

conflict

conflict analysis data

Definition at line 9207 of file conflict.c.

References SCIP_Conflict::ndualproofsinfsuccess, and NULL.

Referenced by SCIPgetNConflictDualproofsApplied(), and SCIPprintConflictStatistics().

SCIPconflictGetNDualproofsInfGlobal()

SCIP_Longint SCIPconflictGetNDualproofsInfGlobal

(

SCIP_CONFLICT *

conflict

)

gets number of globally valid dual proof constraints derived from infeasible LPs

Parameters

conflict

conflict analysis data

Definition at line 9217 of file conflict.c.

References SCIP_Conflict::ndualproofsinfglobal, and NULL.

Referenced by SCIPgetNConflictConssFound(), and SCIPprintConflictStatistics().

SCIPconflictGetNDualproofsInfLocal()

SCIP_Longint SCIPconflictGetNDualproofsInfLocal

(

SCIP_CONFLICT *

conflict

)

gets number of locally valid dual proof constraints derived from infeasible LPs

Parameters

conflict

conflict analysis data

Definition at line 9227 of file conflict.c.

References SCIP_Conflict::ndualproofsinflocal, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNDualproofsInfNonzeros()

SCIP_Longint SCIPconflictGetNDualproofsInfNonzeros

(

SCIP_CONFLICT *

conflict

)

gets average length of dual proof constraints derived from infeasible LPs

Parameters

conflict

conflict analysis data

Definition at line 9237 of file conflict.c.

References SCIP_Conflict::dualproofsinfnnonzeros, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNDualproofsBndSuccess()

SCIP_Longint SCIPconflictGetNDualproofsBndSuccess

(

SCIP_CONFLICT *

conflict

)

gets number of successfully analyzed dual proofs derived from bound exceeding LPs

Parameters

conflict

conflict analysis data

Definition at line 9247 of file conflict.c.

References SCIP_Conflict::ndualproofsbndsuccess, and NULL.

Referenced by SCIPgetNConflictDualproofsApplied(), and SCIPprintConflictStatistics().

SCIPconflictGetNDualproofsBndGlobal()

SCIP_Longint SCIPconflictGetNDualproofsBndGlobal

(

SCIP_CONFLICT *

conflict

)

gets number of globally applied dual proofs derived from bound exceeding LPs

Parameters

conflict

conflict analysis data

Definition at line 9257 of file conflict.c.

References SCIP_Conflict::ndualproofsbndglobal, and NULL.

Referenced by SCIPgetNConflictConssFound(), and SCIPprintConflictStatistics().

SCIPconflictGetNDualproofsBndLocal()

SCIP_Longint SCIPconflictGetNDualproofsBndLocal

(

SCIP_CONFLICT *

conflict

)

gets number of locally applied dual proofs derived from bound exceeding LPs

Parameters

conflict

conflict analysis data

Definition at line 9267 of file conflict.c.

References SCIP_Conflict::ndualproofsbndlocal, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNDualproofsBndNonzeros()

SCIP_Longint SCIPconflictGetNDualproofsBndNonzeros

(

SCIP_CONFLICT *

conflict

)

gets average length of dual proofs derived from bound exceeding LPs

Parameters

conflict

conflict analysis data

Definition at line 9277 of file conflict.c.

References SCIP_Conflict::dualproofsbndnnonzeros, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNStrongbranchCalls()

SCIP_Longint SCIPconflictGetNStrongbranchCalls

(

SCIP_CONFLICT *

conflict

)

gets number of calls to infeasible strong branching conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 9287 of file conflict.c.

References SCIP_Conflict::nsbcalls, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNStrongbranchSuccess()

SCIP_Longint SCIPconflictGetNStrongbranchSuccess

(

SCIP_CONFLICT *

conflict

)

gets number of calls to infeasible strong branching conflict analysis that yield at least one conflict constraint

Parameters

conflict

conflict analysis data

Definition at line 9297 of file conflict.c.

References SCIP_Conflict::nsbsuccess, and NULL.

Referenced by SCIPprintConflictStatistics(), and SCIPsolveCIP().

SCIPconflictGetNStrongbranchConflictConss()

SCIP_Longint SCIPconflictGetNStrongbranchConflictConss

(

SCIP_CONFLICT *

conflict

)

gets number of conflict constraints detected in infeasible strong branching conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 9307 of file conflict.c.

References SCIP_Conflict::nsbconfconss, and NULL.

Referenced by SCIPgetNConflictConssFound(), and SCIPprintConflictStatistics().

SCIPconflictGetNStrongbranchConflictLiterals()

SCIP_Longint SCIPconflictGetNStrongbranchConflictLiterals

(

SCIP_CONFLICT *

conflict

)

gets total number of literals in conflict constraints created in infeasible strong branching conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 9317 of file conflict.c.

References SCIP_Conflict::nsbconfliterals, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNStrongbranchReconvergenceConss()

SCIP_Longint SCIPconflictGetNStrongbranchReconvergenceConss

(

SCIP_CONFLICT *

conflict

)

gets number of reconvergence constraints detected in infeasible strong branching conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 9327 of file conflict.c.

References SCIP_Conflict::nsbreconvconss, and NULL.

Referenced by SCIPgetNConflictConssFound(), and SCIPprintConflictStatistics().

SCIPconflictGetNStrongbranchReconvergenceLiterals()

SCIP_Longint SCIPconflictGetNStrongbranchReconvergenceLiterals

(

SCIP_CONFLICT *

conflict

)

gets total number of literals in reconvergence constraints created in infeasible strong branching conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 9337 of file conflict.c.

References SCIP_Conflict::nsbreconvliterals, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNStrongbranchIterations()

SCIP_Longint SCIPconflictGetNStrongbranchIterations

(

SCIP_CONFLICT *

conflict

)

gets number of LP iterations in infeasible strong branching conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 9347 of file conflict.c.

References SCIP_Conflict::nsbiterations, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictAnalyzePseudo()

SCIP_RETCODE SCIPconflictAnalyzePseudo	(	SCIP_CONFLICT *	conflict,
		BMS_BLKMEM *	blkmem,
		SCIP_SET *	set,
		SCIP_STAT *	stat,
		SCIP_PROB *	transprob,
		SCIP_PROB *	origprob,
		SCIP_TREE *	tree,
		SCIP_REOPT *	reopt,
		SCIP_LP *	lp,
		SCIP_BRANCHCAND *	branchcand,
		SCIP_EVENTQUEUE *	eventqueue,
		SCIP_CLIQUETABLE *	cliquetable,
		SCIP_Bool *	success
	)

analyzes a pseudo solution with objective value exceeding the current cutoff to find out the bound changes on variables that were responsible for the objective value degradation; on success, calls standard conflict analysis with the responsible variables as starting conflict set, thus creating a conflict constraint out of the resulting conflict set; updates statistics for pseudo solution conflict analysis

Parameters

conflict	conflict analysis data
blkmem	block memory of transformed problem
set	global SCIP settings
stat	problem statistics
transprob	transformed problem
origprob	original problem
tree	branch and bound tree
reopt	reoptimization data structure
lp	LP data
branchcand	branching candidate storage
eventqueue	event queue
cliquetable	clique table data structure
success	pointer to store whether a conflict constraint was created, or NULL

Definition at line 9369 of file conflict.c.

References conflictAnalyzeRemainingBdchgs(), SCIP_Conflict::conflictset, SCIP_ConflictSet::conflicttype, SCIP_Lp::cutoffbound, FALSE, SCIP_Lp::lpi, SCIP_Conflict::nconflictsets, SCIP_Var::nlbchginfos, SCIP_Conflict::npseudocalls, SCIP_Conflict::npseudoconfconss, SCIP_Conflict::npseudoconfliterals, SCIP_Conflict::npseudoreconvconss, SCIP_Conflict::npseudoreconvliterals, SCIP_Conflict::npseudosuccess, SCIP_Var::nubchginfos, NULL, SCIP_Prob::nvars, SCIP_Conflict::pseudoanalyzetime, SCIP_CALL, SCIP_CONFTYPE_BNDEXCEEDING, SCIP_OKAY, SCIP_Real, SCIPclockStart(), SCIPclockStop(), SCIPconflictFlushConss(), SCIPlpGetPseudoObjval(), SCIPsetAllocBufferArray, SCIPsetDebugMsg, SCIPsetFreeBufferArray, SCIPsetIsFeasEQ(), SCIPsetIsFeasGT(), SCIPsetIsInfinity(), SCIPsetIsZero(), SCIPsetSumepsilon(), SCIPtreeGetCurrentDepth(), SCIPvarGetLbLocal(), SCIPvarGetObj(), SCIPvarGetUbLocal(), TRUE, undoBdchgsProof(), SCIP_ConflictSet::usescutoffbound, and SCIP_Prob::vars.

Referenced by applyBounding().

SCIPconflictGetPseudoTime()

SCIP_Real SCIPconflictGetPseudoTime

(

SCIP_CONFLICT *

conflict

)

gets time in seconds used for analyzing pseudo solution conflicts

Parameters

conflict

conflict analysis data

Definition at line 9521 of file conflict.c.

References NULL, SCIP_Conflict::pseudoanalyzetime, and SCIPclockGetTime().

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNPseudoCalls()

SCIP_Longint SCIPconflictGetNPseudoCalls

(

SCIP_CONFLICT *

conflict

)

gets number of calls to pseudo solution conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 9531 of file conflict.c.

References SCIP_Conflict::npseudocalls, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNPseudoSuccess()

SCIP_Longint SCIPconflictGetNPseudoSuccess

(

SCIP_CONFLICT *

conflict

)

gets number of calls to pseudo solution conflict analysis that yield at least one conflict constraint

Parameters

conflict

conflict analysis data

Definition at line 9541 of file conflict.c.

References SCIP_Conflict::npseudosuccess, and NULL.

Referenced by SCIPprintConflictStatistics(), and SCIPsolveCIP().

SCIPconflictGetNPseudoConflictConss()

SCIP_Longint SCIPconflictGetNPseudoConflictConss

(

SCIP_CONFLICT *

conflict

)

gets number of conflict constraints detected in pseudo solution conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 9551 of file conflict.c.

References SCIP_Conflict::npseudoconfconss, and NULL.

Referenced by SCIPgetNConflictConssFound(), and SCIPprintConflictStatistics().

SCIPconflictGetNPseudoConflictLiterals()

SCIP_Longint SCIPconflictGetNPseudoConflictLiterals

(

SCIP_CONFLICT *

conflict

)

gets total number of literals in conflict constraints created in pseudo solution conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 9561 of file conflict.c.

References SCIP_Conflict::npseudoconfliterals, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictGetNPseudoReconvergenceConss()

SCIP_Longint SCIPconflictGetNPseudoReconvergenceConss

(

SCIP_CONFLICT *

conflict

)

gets number of reconvergence constraints detected in pseudo solution conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 9571 of file conflict.c.

References SCIP_Conflict::npseudoreconvconss, and NULL.

Referenced by SCIPgetNConflictConssFound(), and SCIPprintConflictStatistics().

SCIPconflictGetNPseudoReconvergenceLiterals()

SCIP_Longint SCIPconflictGetNPseudoReconvergenceLiterals

(

SCIP_CONFLICT *

conflict

)

gets total number of literals in reconvergence constraints created in pseudo solution conflict analysis

Parameters

conflict

conflict analysis data

Definition at line 9581 of file conflict.c.

References SCIP_Conflict::npseudoreconvliterals, and NULL.

Referenced by SCIPprintConflictStatistics().

SCIPconflictEnableOrDisableClocks()

void SCIPconflictEnableOrDisableClocks	(	SCIP_CONFLICT *	conflict,
		SCIP_Bool	enable
	)

enables or disables all clocks of conflict, depending on the value of the flag

Parameters

conflict	the conflict analysis data for which all clocks should be enabled or disabled
enable	should the clocks of the conflict analysis data be enabled?

Definition at line 9592 of file conflict.c.

References SCIP_Conflict::boundlpanalyzetime, SCIP_Conflict::dIBclock, SCIP_Conflict::inflpanalyzetime, NULL, SCIP_Conflict::propanalyzetime, SCIP_Conflict::pseudoanalyzetime, SCIP_Conflict::sbanalyzetime, and SCIPclockEnableOrDisable().

Referenced by SCIPconflictCreate(), and SCIPenableOrDisableStatisticTiming().