lpi_none.c

Go to the documentation of this file.

/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/*                                                                           */
/*                  This file is part of the program and library             */
/*         SCIP --- Solving Constraint Integer Programs                      */
/*                                                                           */
/*  Copyright (c) 2002-2023 Zuse Institute Berlin (ZIB)                      */
/*                                                                           */
/*  Licensed under the Apache License, Version 2.0 (the "License");          */
/*  you may not use this file except in compliance with the License.         */
/*  You may obtain a copy of the License at                                  */
/*                                                                           */
/*      http://www.apache.org/licenses/LICENSE-2.0                           */
/*                                                                           */
/*  Unless required by applicable law or agreed to in writing, software      */
/*  distributed under the License is distributed on an "AS IS" BASIS,        */
/*  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. */
/*  See the License for the specific language governing permissions and      */
/*  limitations under the License.                                           */
/*                                                                           */
/*  You should have received a copy of the Apache-2.0 license                */
/*  along with SCIP; see the file LICENSE. If not visit scipopt.org.         */
/*                                                                           */
/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */

/**@file   lpi_none.c
 * @ingroup LPIS
 * @brief  dummy interface for the case no LP solver is needed
 * @author Stefan Heinz
 */

/*--+----1----+----2----+----3----+----4----+----5----+----6----+----7----+----8----+----9----+----0----+----1----+----2*/

#include <assert.h>

#include "lpi/lpi.h"
#include "scip/pub_message.h"

#define LPINAME          "NONE"              /**< name of the LPI interface */
#define LPIINFINITY       1e20               /**< infinity value */


/* globally turn off lint warnings: */
/*lint --e{715}*/

/** LP interface
 *
 *  Store several statistic values about the LP. These values are only needed in order to provide a rudimentary
 *  communication, e.g., there are asserts that check the number of rows and columns.
 */
struct SCIP_LPi
{
   int                   nrows;              /**< number of rows */
   int                   ncols;              /**< number of columns */
};


/*
 * Local Methods
 */

/** error handling method */
static
void errorMessageAbort(
   void
   )
{  /*lint --e{2707}*/
   SCIPerrorMessage("No LP solver available (LPS=none).\n");
   SCIPerrorMessage("Ensure <lp/solvefreq = -1>; note that continuous variables might require an LP-solver.\n");
   SCIPABORT();
}

/** error handling method */
static
void errorMessage(
   void
   )
{
   SCIPerrorMessage("No LP solver available (LPS=none).\n");
   SCIPerrorMessage("Ensure <lp/solvefreq = -1>; note that continuous variables might require an LP-solver.\n");
}

/*
 * LP Interface Methods
 */


/*
 * Miscellaneous Methods
 */

/**@name Miscellaneous Methods */
/**@{ */

/** gets name and version of LP solver */
const char* SCIPlpiGetSolverName(
   void
   )
{
   return LPINAME;
}

/** gets description of LP solver (developer, webpage, ...) */
const char* SCIPlpiGetSolverDesc(
   void
   )
{
   return "dummy LP solver interface which solely purpose is to resolve references at linking";
}

/** gets pointer for LP solver - use only with great care */
void* SCIPlpiGetSolverPointer(
   SCIP_LPI*             lpi                 /**< pointer to an LP interface structure */
   )
{  /*lint --e{715}*/
   return (void*) NULL;
}

/** pass integrality information to LP solver */
SCIP_RETCODE SCIPlpiSetIntegralityInformation(
   SCIP_LPI*             lpi,                /**< pointer to an LP interface structure */
   int                   ncols,              /**< length of integrality array */
   int*                  intInfo             /**< integrality array (0: continuous, 1: integer). May be NULL iff ncols is 0.  */
   )
{ /*lint --e{715}*/
   SCIPerrorMessage("SCIPlpiSetIntegralityInformation() has not been implemented yet.\n");
   return SCIP_LPERROR;
}

/** informs about availability of a primal simplex solving method */
SCIP_Bool SCIPlpiHasPrimalSolve(
   void
   )
{
   return FALSE;
}

/** informs about availability of a dual simplex solving method */
SCIP_Bool SCIPlpiHasDualSolve(
   void
   )
{
   return FALSE;
}

/** informs about availability of a barrier solving method */
SCIP_Bool SCIPlpiHasBarrierSolve(
   void
   )
{
   return FALSE;
}

/**@} */




/*
 * LPI Creation and Destruction Methods
 */

/**@name LPI Creation and Destruction Methods */
/**@{ */

/** creates an LP problem object */
SCIP_RETCODE SCIPlpiCreate(
   SCIP_LPI**            lpi,                /**< pointer to an LP interface structure */
   SCIP_MESSAGEHDLR*     messagehdlr,        /**< message handler to use for printing messages, or NULL */
   const char*           name,               /**< problem name */
   SCIP_OBJSEN           objsen              /**< objective sense */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(name != NULL);
   SCIPdebugMessage("SCIPlpiCreate()\n");
   SCIPdebugMessage("Note that there is no LP solver linked to the binary\n");

   /* create empty LPI */
   SCIP_ALLOC( BMSallocMemory(lpi) );
   (*lpi)->nrows = 0;
   (*lpi)->ncols = 0;

   return SCIP_OKAY;
}

/** deletes an LP problem object */
SCIP_RETCODE SCIPlpiFree(
   SCIP_LPI**            lpi                 /**< pointer to an LP interface structure */
   )
{  /*lint --e{715}*/
   assert( lpi != NULL );
   SCIPdebugMessage("SCIPlpiFree()\n");

   BMSfreeMemory(lpi);

   return SCIP_OKAY;
}

/**@} */




/*
 * Modification Methods
 */

/**@name Modification Methods */
/**@{ */

/** copies LP data with column matrix into LP solver */
SCIP_RETCODE SCIPlpiLoadColLP(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_OBJSEN           objsen,             /**< objective sense */
   int                   ncols,              /**< number of columns */
   const SCIP_Real*      obj,                /**< objective function values of columns */
   const SCIP_Real*      lb,                 /**< lower bounds of columns */
   const SCIP_Real*      ub,                 /**< upper bounds of columns */
   char**                colnames,           /**< column names, or NULL */
   int                   nrows,              /**< number of rows */
   const SCIP_Real*      lhs,                /**< left hand sides of rows */
   const SCIP_Real*      rhs,                /**< right hand sides of rows */
   char**                rownames,           /**< row names, or NULL */
   int                   nnonz,              /**< number of nonzero elements in the constraint matrix */
   const int*            beg,                /**< start index of each column in ind- and val-array */
   const int*            ind,                /**< row indices of constraint matrix entries */
   const SCIP_Real*      val                 /**< values of constraint matrix entries */
   )
{  /*lint --e{715}*/
#ifndef NDEBUG
   {
      int j;
      for( j = 0; j < nnonz; j++ )
         assert( val[j] != 0 );
   }
#endif

   assert( lpi != NULL );
   assert(lhs != NULL);
   assert(rhs != NULL);
   assert(obj != NULL);
   assert(lb != NULL);
   assert(ub != NULL);
   assert(beg != NULL);
   assert(ind != NULL);
   assert(val != NULL);

   lpi->nrows = nrows;
   lpi->ncols = ncols;
   assert( lpi->nrows >= 0 );
   assert( lpi->ncols >= 0 );

   return SCIP_OKAY;
}

/** adds columns to the LP */
SCIP_RETCODE SCIPlpiAddCols(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   ncols,              /**< number of columns to be added */
   const SCIP_Real*      obj,                /**< objective function values of new columns */
   const SCIP_Real*      lb,                 /**< lower bounds of new columns */
   const SCIP_Real*      ub,                 /**< upper bounds of new columns */
   char**                colnames,           /**< column names, or NULL */
   int                   nnonz,              /**< number of nonzero elements to be added to the constraint matrix */
   const int*            beg,                /**< start index of each column in ind- and val-array, or NULL if nnonz == 0 */
   const int*            ind,                /**< row indices of constraint matrix entries, or NULL if nnonz == 0 */
   const SCIP_Real*      val                 /**< values of constraint matrix entries, or NULL if nnonz == 0 */
   )
{  /*lint --e{715}*/
   assert( lpi != NULL );
   assert( lpi->ncols >= 0 );
   assert(obj != NULL);
   assert(lb != NULL);
   assert(ub != NULL);
   assert(nnonz == 0 || beg != NULL);
   assert(nnonz == 0 || ind != NULL);
   assert(nnonz == 0 || val != NULL);
   assert(nnonz >= 0);
   assert(ncols >= 0);

#ifndef NDEBUG
   {
      int j;
      for( j = 0; j < nnonz; j++ )
      {
         assert( val[j] != 0.0 );
         /* perform check that no new rows are added - this is forbidden */
         assert( 0 <= ind[j] && ind[j] < lpi->nrows );
      }
   }
#endif

   lpi->ncols += ncols;

   return SCIP_OKAY;
}

/** deletes all columns in the given range from LP */
SCIP_RETCODE SCIPlpiDelCols(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   firstcol,           /**< first column to be deleted */
   int                   lastcol             /**< last column to be deleted */
   )
{  /*lint --e{715}*/
   assert( lpi != NULL );
   assert( lpi->ncols >= 0 );

   lpi->ncols -= lastcol - firstcol + 1;
   assert( lpi->ncols >= 0 );

   return SCIP_OKAY;
}

/** deletes columns from SCIP_LP; the new position of a column must not be greater that its old position */
SCIP_RETCODE SCIPlpiDelColset(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int*                  dstat               /**< deletion status of columns
                                              *   input:  1 if column should be deleted, 0 if not
                                              *   output: new position of column, -1 if column was deleted */
   )
{  /*lint --e{715}*/
   int cnt = 0;
   int j;

   assert( lpi != NULL );
   assert( dstat != NULL );
   assert( lpi->ncols >= 0 );

   for (j = 0; j < lpi->ncols; ++j)
   {
      if ( dstat[j] )
      {
         ++cnt;
         dstat[j] = -1;
      }
      else
         dstat[j] = cnt;
   }
   lpi->ncols -= cnt;
   assert( lpi->ncols >= 0 );

   return SCIP_OKAY;
}

/** adds rows to the LP */
SCIP_RETCODE SCIPlpiAddRows(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   nrows,              /**< number of rows to be added */
   const SCIP_Real*      lhs,                /**< left hand sides of new rows */
   const SCIP_Real*      rhs,                /**< right hand sides of new rows */
   char**                rownames,           /**< row names, or NULL */
   int                   nnonz,              /**< number of nonzero elements to be added to the constraint matrix */
   const int*            beg,                /**< start index of each row in ind- and val-array, or NULL if nnonz == 0 */
   const int*            ind,                /**< column indices of constraint matrix entries, or NULL if nnonz == 0 */
   const SCIP_Real*      val                 /**< values of constraint matrix entries, or NULL if nnonz == 0 */
   )
{  /*lint --e{715}*/
   assert( lpi != NULL );
   assert( lpi->nrows >= 0 );
   assert(lhs != NULL);
   assert(rhs != NULL);
   assert(nnonz == 0 || beg != NULL);
   assert(nnonz == 0 || ind != NULL);
   assert(nnonz == 0 || val != NULL);

#ifndef NDEBUG
   /* perform check that no new columns are added - this is forbidden */
   {
      int j;
      for (j = 0; j < nnonz; ++j)
      {
         assert( val[j] != 0.0 );
         assert( 0 <= ind[j] && ind[j] < lpi->ncols );
      }
   }
#endif

   lpi->nrows += nrows;

   return SCIP_OKAY;
}

/** deletes all rows in the given range from LP */
SCIP_RETCODE SCIPlpiDelRows(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   firstrow,           /**< first row to be deleted */
   int                   lastrow             /**< last row to be deleted */
   )
{  /*lint --e{715}*/
   assert( lpi != NULL );
   assert( lpi->nrows >= 0 );

   lpi->nrows -= lastrow - firstrow + 1;
   assert( lpi->nrows >= 0 );

   return SCIP_OKAY;
}

/** deletes rows from SCIP_LP; the new position of a row must not be greater that its old position */
SCIP_RETCODE SCIPlpiDelRowset(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int*                  dstat               /**< deletion status of rows
                                              *   input:  1 if row should be deleted, 0 if not
                                              *   output: new position of row, -1 if row was deleted */
   )
{  /*lint --e{715}*/
   int cnt = 0;
   int i;

   assert( lpi != NULL );
   assert( dstat != NULL );
   assert( lpi->nrows >= 0 );

   for (i = 0; i < lpi->nrows; ++i)
   {
      if ( dstat[i] )
      {
         ++cnt;
         dstat[i] = -1;
      }
      else
         dstat[i] = cnt;
   }
   lpi->nrows -= cnt;
   assert( lpi->nrows >= 0 );

   return SCIP_OKAY;
}

/** clears the whole LP */
SCIP_RETCODE SCIPlpiClear(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert( lpi != NULL );
   assert( lpi->nrows >= 0 );
   assert( lpi->ncols >= 0 );

   lpi->nrows = 0;
   lpi->ncols = 0;

   return SCIP_OKAY;
}

/** changes lower and upper bounds of columns */
SCIP_RETCODE SCIPlpiChgBounds(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   ncols,              /**< number of columns to change bounds for */
   const int*            ind,                /**< column indices or NULL if ncols is zero */
   const SCIP_Real*      lb,                 /**< values for the new lower bounds or NULL if ncols is zero */
   const SCIP_Real*      ub                  /**< values for the new upper bounds or NULL if ncols is zero */
   )
{  /*lint --e{715}*/
   int j;

   assert(ncols == 0 || (ind != NULL && lb != NULL && ub != NULL));

   if( ncols <= 0 )
      return SCIP_OKAY;

   for (j = 0; j < ncols; ++j)
   {
      if ( SCIPlpiIsInfinity(lpi, lb[j]) )
      {
         SCIPerrorMessage("LP Error: fixing lower bound for variable %d to infinity.\n", ind[j]);
         return SCIP_LPERROR;
      }
      if ( SCIPlpiIsInfinity(lpi, -ub[j]) )
      {
         SCIPerrorMessage("LP Error: fixing upper bound for variable %d to -infinity.\n", ind[j]);
         return SCIP_LPERROR;
      }
   }

   return SCIP_OKAY;
}

/** changes left and right hand sides of rows */
SCIP_RETCODE SCIPlpiChgSides(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   nrows,              /**< number of rows to change sides for */
   const int*            ind,                /**< row indices */
   const SCIP_Real*      lhs,                /**< new values for left hand sides */
   const SCIP_Real*      rhs                 /**< new values for right hand sides */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(ind != NULL);
   assert(lhs != NULL);
   assert(rhs != NULL);
   return SCIP_OKAY;
}

/** changes a single coefficient */
SCIP_RETCODE SCIPlpiChgCoef(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   row,                /**< row number of coefficient to change */
   int                   col,                /**< column number of coefficient to change */
   SCIP_Real             newval              /**< new value of coefficient */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   return SCIP_OKAY;
}

/** changes the objective sense */
SCIP_RETCODE SCIPlpiChgObjsen(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_OBJSEN           objsen              /**< new objective sense */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   return SCIP_OKAY;
}

/** changes objective values of columns in the LP */
SCIP_RETCODE SCIPlpiChgObj(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   ncols,              /**< number of columns to change objective value for */
   const int*            ind,                /**< column indices to change objective value for */
   const SCIP_Real*      obj                 /**< new objective values for columns */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(ind != NULL);
   assert(obj != NULL);
   return SCIP_OKAY;
}

/** multiplies a row with a non-zero scalar; for negative scalars, the row's sense is switched accordingly */
SCIP_RETCODE SCIPlpiScaleRow(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   row,                /**< row number to scale */
   SCIP_Real             scaleval            /**< scaling multiplier */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   return SCIP_OKAY;
}

/** multiplies a column with a non-zero scalar; the objective value is multiplied with the scalar, and the bounds
 *  are divided by the scalar; for negative scalars, the column's bounds are switched
 */
SCIP_RETCODE SCIPlpiScaleCol(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   col,                /**< column number to scale */
   SCIP_Real             scaleval            /**< scaling multiplier */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   return SCIP_OKAY;
}

/**@} */




/*
 * Data Accessing Methods
 */

/**@name Data Accessing Methods */
/**@{ */

/** gets the number of rows in the LP */
SCIP_RETCODE SCIPlpiGetNRows(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int*                  nrows               /**< pointer to store the number of rows */
   )
{  /*lint --e{715}*/
   assert( lpi != NULL );
   assert( nrows != NULL );
   assert( lpi->nrows >= 0 );

   *nrows = lpi->nrows;

   return SCIP_OKAY;
}

/** gets the number of columns in the LP */
SCIP_RETCODE SCIPlpiGetNCols(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int*                  ncols               /**< pointer to store the number of cols */
   )
{  /*lint --e{715}*/
   assert( lpi != NULL );
   assert( ncols != NULL );
   assert( lpi->ncols >= 0 );

   *ncols = lpi->ncols;

   return SCIP_OKAY;
}

/** gets the number of nonzero elements in the LP constraint matrix */
SCIP_RETCODE SCIPlpiGetNNonz(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int*                  nnonz               /**< pointer to store the number of nonzeros */
   )
{  /*lint --e{715}*/
   assert(nnonz != NULL);
   assert(lpi != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** gets columns from LP problem object; the arrays have to be large enough to store all values
 *  Either both, lb and ub, have to be NULL, or both have to be non-NULL,
 *  either nnonz, beg, ind, and val have to be NULL, or all of them have to be non-NULL.
 */
SCIP_RETCODE SCIPlpiGetCols(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   firstcol,           /**< first column to get from LP */
   int                   lastcol,            /**< last column to get from LP */
   SCIP_Real*            lb,                 /**< buffer to store the lower bound vector, or NULL */
   SCIP_Real*            ub,                 /**< buffer to store the upper bound vector, or NULL */
   int*                  nnonz,              /**< pointer to store the number of nonzero elements returned, or NULL */
   int*                  beg,                /**< buffer to store start index of each column in ind- and val-array, or NULL */
   int*                  ind,                /**< buffer to store row indices of constraint matrix entries, or NULL */
   SCIP_Real*            val                 /**< buffer to store values of constraint matrix entries, or NULL */
   )
{  /*lint --e{715}*/
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** gets rows from LP problem object; the arrays have to be large enough to store all values.
 *  Either both, lhs and rhs, have to be NULL, or both have to be non-NULL,
 *  either nnonz, beg, ind, and val have to be NULL, or all of them have to be non-NULL.
 */
SCIP_RETCODE SCIPlpiGetRows(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   firstrow,           /**< first row to get from LP */
   int                   lastrow,            /**< last row to get from LP */
   SCIP_Real*            lhs,                /**< buffer to store left hand side vector, or NULL */
   SCIP_Real*            rhs,                /**< buffer to store right hand side vector, or NULL */
   int*                  nnonz,              /**< pointer to store the number of nonzero elements returned, or NULL */
   int*                  beg,                /**< buffer to store start index of each row in ind- and val-array, or NULL */
   int*                  ind,                /**< buffer to store column indices of constraint matrix entries, or NULL */
   SCIP_Real*            val                 /**< buffer to store values of constraint matrix entries, or NULL */
   )
{  /*lint --e{715}*/
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** gets column names */
SCIP_RETCODE SCIPlpiGetColNames(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   firstcol,           /**< first column to get name from LP */
   int                   lastcol,            /**< last column to get name from LP */
   char**                colnames,           /**< pointers to column names (of size at least lastcol-firstcol+1) or NULL if namestoragesize is zero */
   char*                 namestorage,        /**< storage for col names or NULL if namestoragesize is zero */
   int                   namestoragesize,    /**< size of namestorage (if 0, storageleft returns the storage needed) */
   int*                  storageleft         /**< amount of storage left (if < 0 the namestorage was not big enough) or NULL if namestoragesize is zero */
   )
{ /*lint --e{715}*/
   assert(lpi != NULL);
   assert(colnames != NULL || namestoragesize == 0);
   assert(namestorage != NULL || namestoragesize == 0);
   assert(namestoragesize >= 0);
   assert(storageleft != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** gets row names */
SCIP_RETCODE SCIPlpiGetRowNames(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   firstrow,           /**< first row to get name from LP */
   int                   lastrow,            /**< last row to get name from LP */
   char**                rownames,           /**< pointers to row names (of size at least lastrow-firstrow+1) or NULL if namestoragesize is zero */
   char*                 namestorage,        /**< storage for row names or NULL if namestoragesize is zero */
   int                   namestoragesize,    /**< size of namestorage (if 0, -storageleft returns the storage needed) */
   int*                  storageleft         /**< amount of storage left (if < 0 the namestorage was not big enough) or NULL if namestoragesize is zero */
   )
{ /*lint --e{715}*/
   assert(lpi != NULL);
   assert(rownames != NULL || namestoragesize == 0);
   assert(namestorage != NULL || namestoragesize == 0);
   assert(namestoragesize >= 0);
   assert(storageleft != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** gets the objective sense of the LP */
SCIP_RETCODE SCIPlpiGetObjsen(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_OBJSEN*          objsen              /**< pointer to store objective sense */
   )
{  /*lint --e{715}*/
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** gets objective coefficients from LP problem object */
SCIP_RETCODE SCIPlpiGetObj(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   firstcol,           /**< first column to get objective coefficient for */
   int                   lastcol,            /**< last column to get objective coefficient for */
   SCIP_Real*            vals                /**< array to store objective coefficients */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(firstcol <= lastcol);
   assert(vals != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** gets current bounds from LP problem object */
SCIP_RETCODE SCIPlpiGetBounds(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   firstcol,           /**< first column to get bounds for */
   int                   lastcol,            /**< last column to get bounds for */
   SCIP_Real*            lbs,                /**< array to store lower bound values, or NULL */
   SCIP_Real*            ubs                 /**< array to store upper bound values, or NULL */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(firstcol <= lastcol);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** gets current row sides from LP problem object */
SCIP_RETCODE SCIPlpiGetSides(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   firstrow,           /**< first row to get sides for */
   int                   lastrow,            /**< last row to get sides for */
   SCIP_Real*            lhss,               /**< array to store left hand side values, or NULL */
   SCIP_Real*            rhss                /**< array to store right hand side values, or NULL */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(firstrow <= lastrow);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** gets a single coefficient */
SCIP_RETCODE SCIPlpiGetCoef(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   row,                /**< row number of coefficient */
   int                   col,                /**< column number of coefficient */
   SCIP_Real*            val                 /**< pointer to store the value of the coefficient */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(val != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/**@} */




/*
 * Solving Methods
 */

/**@name Solving Methods */
/**@{ */

/** calls primal simplex to solve the LP */
SCIP_RETCODE SCIPlpiSolvePrimal(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** calls dual simplex to solve the LP */
SCIP_RETCODE SCIPlpiSolveDual(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** calls barrier or interior point algorithm to solve the LP with crossover to simplex basis */
SCIP_RETCODE SCIPlpiSolveBarrier(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_Bool             crossover           /**< perform crossover */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** start strong branching - call before any strong branching */
SCIP_RETCODE SCIPlpiStartStrongbranch(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   return SCIP_OKAY;
}

/** end strong branching - call after any strong branching */
SCIP_RETCODE SCIPlpiEndStrongbranch(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   return SCIP_OKAY;
}

/** performs strong branching iterations on one @b fractional candidate */
SCIP_RETCODE SCIPlpiStrongbranchFrac(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   col,                /**< column to apply strong branching on */
   SCIP_Real             psol,               /**< fractional current primal solution value of column */
   int                   itlim,              /**< iteration limit for strong branchings */
   SCIP_Real*            down,               /**< stores dual bound after branching column down */
   SCIP_Real*            up,                 /**< stores dual bound after branching column up */
   SCIP_Bool*            downvalid,          /**< stores whether the returned down value is a valid dual bound;
                                              *   otherwise, it can only be used as an estimate value */
   SCIP_Bool*            upvalid,            /**< stores whether the returned up value is a valid dual bound;
                                              *   otherwise, it can only be used as an estimate value */
   int*                  iter                /**< stores total number of strong branching iterations, or -1; may be NULL */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert( down != NULL );
   assert( up != NULL );
   assert( downvalid != NULL );
   assert( upvalid != NULL );
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** performs strong branching iterations on given @b fractional candidates */
SCIP_RETCODE SCIPlpiStrongbranchesFrac(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int*                  cols,               /**< columns to apply strong branching on */
   int                   ncols,              /**< number of columns */
   SCIP_Real*            psols,              /**< fractional current primal solution values of columns */
   int                   itlim,              /**< iteration limit for strong branchings */
   SCIP_Real*            down,               /**< stores dual bounds after branching columns down */
   SCIP_Real*            up,                 /**< stores dual bounds after branching columns up */
   SCIP_Bool*            downvalid,          /**< stores whether the returned down values are valid dual bounds;
                                              *   otherwise, they can only be used as an estimate values */
   SCIP_Bool*            upvalid,            /**< stores whether the returned up values are a valid dual bounds;
                                              *   otherwise, they can only be used as an estimate values */
   int*                  iter                /**< stores total number of strong branching iterations, or -1; may be NULL */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert( cols != NULL );
   assert( psols != NULL );
   assert( down != NULL );
   assert( up != NULL );
   assert( downvalid != NULL );
   assert( upvalid != NULL );
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** performs strong branching iterations on one candidate with @b integral value */
SCIP_RETCODE SCIPlpiStrongbranchInt(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   col,                /**< column to apply strong branching on */
   SCIP_Real             psol,               /**< current integral primal solution value of column */
   int                   itlim,              /**< iteration limit for strong branchings */
   SCIP_Real*            down,               /**< stores dual bound after branching column down */
   SCIP_Real*            up,                 /**< stores dual bound after branching column up */
   SCIP_Bool*            downvalid,          /**< stores whether the returned down value is a valid dual bound;
                                              *   otherwise, it can only be used as an estimate value */
   SCIP_Bool*            upvalid,            /**< stores whether the returned up value is a valid dual bound;
                                              *   otherwise, it can only be used as an estimate value */
   int*                  iter                /**< stores total number of strong branching iterations, or -1; may be NULL */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert( down != NULL );
   assert( up != NULL );
   assert( downvalid != NULL );
   assert( upvalid != NULL );
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** performs strong branching iterations on given candidates with @b integral values */
SCIP_RETCODE SCIPlpiStrongbranchesInt(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int*                  cols,               /**< columns to apply strong branching on */
   int                   ncols,              /**< number of columns */
   SCIP_Real*            psols,              /**< current integral primal solution values of columns */
   int                   itlim,              /**< iteration limit for strong branchings */
   SCIP_Real*            down,               /**< stores dual bounds after branching columns down */
   SCIP_Real*            up,                 /**< stores dual bounds after branching columns up */
   SCIP_Bool*            downvalid,          /**< stores whether the returned down values are valid dual bounds;
                                              *   otherwise, they can only be used as an estimate values */
   SCIP_Bool*            upvalid,            /**< stores whether the returned up values are a valid dual bounds;
                                              *   otherwise, they can only be used as an estimate values */
   int*                  iter                /**< stores total number of strong branching iterations, or -1; may be NULL */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert( cols != NULL );
   assert( psols != NULL );
   assert( down != NULL );
   assert( up != NULL );
   assert( downvalid != NULL );
   assert( upvalid != NULL );
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}
/**@} */




/*
 * Solution Information Methods
 */

/**@name Solution Information Methods */
/**@{ */

/** returns whether a solve method was called after the last modification of the LP */
SCIP_Bool SCIPlpiWasSolved(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessageAbort();
   return FALSE;
}

/** gets information about primal and dual feasibility of the current LP solution
 *
 *  The feasibility information is with respect to the last solving call and it is only relevant if SCIPlpiWasSolved()
 *  returns true. If the LP is changed, this information might be invalidated.
 *
 *  Note that @a primalfeasible and @a dualfeasible should only return true if the solver has proved the respective LP to
 *  be feasible. Thus, the return values should be equal to the values of SCIPlpiIsPrimalFeasible() and
 *  SCIPlpiIsDualFeasible(), respectively. Note that if feasibility cannot be proved, they should return false (even if
 *  the problem might actually be feasible).
 */
SCIP_RETCODE SCIPlpiGetSolFeasibility(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_Bool*            primalfeasible,     /**< pointer to store primal feasibility status */
   SCIP_Bool*            dualfeasible        /**< pointer to store dual feasibility status */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(primalfeasible != NULL);
   assert(dualfeasible != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** returns TRUE iff LP is proven to have a primal unbounded ray (but not necessary a primal feasible point);
 *  this does not necessarily mean, that the solver knows and can return the primal ray
 */
SCIP_Bool SCIPlpiExistsPrimalRay(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessageAbort();
   return FALSE;
}

/** returns TRUE iff LP is proven to have a primal unbounded ray (but not necessary a primal feasible point),
 *  and the solver knows and can return the primal ray
 */
SCIP_Bool SCIPlpiHasPrimalRay(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessageAbort();
   return FALSE;
}

/** returns TRUE iff LP is proven to be primal unbounded */
SCIP_Bool SCIPlpiIsPrimalUnbounded(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessageAbort();
   return FALSE;
}

/** returns TRUE iff LP is proven to be primal infeasible */
SCIP_Bool SCIPlpiIsPrimalInfeasible(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessageAbort();
   return FALSE;
}

/** returns TRUE iff LP is proven to be primal feasible */
SCIP_Bool SCIPlpiIsPrimalFeasible(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessageAbort();
   return FALSE;
}

/** returns TRUE iff LP is proven to have a dual unbounded ray (but not necessary a dual feasible point);
 *  this does not necessarily mean, that the solver knows and can return the dual ray
 */
SCIP_Bool SCIPlpiExistsDualRay(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessageAbort();
   return FALSE;
}

/** returns TRUE iff LP is proven to have a dual unbounded ray (but not necessary a dual feasible point),
 *  and the solver knows and can return the dual ray
 */
SCIP_Bool SCIPlpiHasDualRay(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessageAbort();
   return FALSE;
}

/** returns TRUE iff LP is proven to be dual unbounded */
SCIP_Bool SCIPlpiIsDualUnbounded(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessageAbort();
   return FALSE;
}

/** returns TRUE iff LP is proven to be dual infeasible */
SCIP_Bool SCIPlpiIsDualInfeasible(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessageAbort();
   return FALSE;
}

/** returns TRUE iff LP is proven to be dual feasible */
SCIP_Bool SCIPlpiIsDualFeasible(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessageAbort();
   return FALSE;
}

/** returns TRUE iff LP was solved to optimality */
SCIP_Bool SCIPlpiIsOptimal(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessageAbort();
   return FALSE;
}

/** returns TRUE iff current LP solution is stable
 *
 *  This function should return true if the solution is reliable, i.e., feasible and optimal (or proven
 *  infeasible/unbounded) with respect to the original problem. The optimality status might be with respect to a scaled
 *  version of the problem, but the solution might not be feasible to the unscaled original problem; in this case,
 *  SCIPlpiIsStable() should return false.
 */
SCIP_Bool SCIPlpiIsStable(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessageAbort();
   return FALSE;
}

/** returns TRUE iff the objective limit was reached */
SCIP_Bool SCIPlpiIsObjlimExc(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessageAbort();
   return FALSE;
}

/** returns TRUE iff the iteration limit was reached */
SCIP_Bool SCIPlpiIsIterlimExc(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessageAbort();
   return FALSE;
}

/** returns TRUE iff the time limit was reached */
SCIP_Bool SCIPlpiIsTimelimExc(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessageAbort();
   return FALSE;
}

/** returns the internal solution status of the solver */
int SCIPlpiGetInternalStatus(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessageAbort();
   return FALSE;
}

/** tries to reset the internal status of the LP solver in order to ignore an instability of the last solving call */
SCIP_RETCODE SCIPlpiIgnoreInstability(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_Bool*            success             /**< pointer to store, whether the instability could be ignored */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(success != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** gets objective value of solution */
SCIP_RETCODE SCIPlpiGetObjval(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_Real*            objval              /**< stores the objective value */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(objval != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** gets primal and dual solution vectors for feasible LPs
 *
 *  Before calling this function, the caller must ensure that the LP has been solved to optimality, i.e., that
 *  SCIPlpiIsOptimal() returns true.
 */
SCIP_RETCODE SCIPlpiGetSol(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_Real*            objval,             /**< stores the objective value, may be NULL if not needed */
   SCIP_Real*            primsol,            /**< primal solution vector, may be NULL if not needed */
   SCIP_Real*            dualsol,            /**< dual solution vector, may be NULL if not needed */
   SCIP_Real*            activity,           /**< row activity vector, may be NULL if not needed */
   SCIP_Real*            redcost             /**< reduced cost vector, may be NULL if not needed */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** gets primal ray for unbounded LPs */
SCIP_RETCODE SCIPlpiGetPrimalRay(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_Real*            ray                 /**< primal ray */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(ray != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** gets dual Farkas proof for infeasibility */
SCIP_RETCODE SCIPlpiGetDualfarkas(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_Real*            dualfarkas          /**< dual Farkas row multipliers */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(dualfarkas != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** gets the number of LP iterations of the last solve call */
SCIP_RETCODE SCIPlpiGetIterations(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int*                  iterations          /**< pointer to store the number of iterations of the last solve call */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(iterations != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** gets information about the quality of an LP solution
 *
 *  Such information is usually only available, if also a (maybe not optimal) solution is available.
 *  The LPI should return SCIP_INVALID for @p quality, if the requested quantity is not available.
 */
SCIP_RETCODE SCIPlpiGetRealSolQuality(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_LPSOLQUALITY     qualityindicator,   /**< indicates which quality should be returned */
   SCIP_Real*            quality             /**< pointer to store quality number */
   )
{ /*lint --e{715}*/
   assert(lpi != NULL);
   assert(quality != NULL);

   *quality = SCIP_INVALID;

   return SCIP_OKAY;
}

/**@} */




/*
 * LP Basis Methods
 */

/**@name LP Basis Methods */
/**@{ */

/** gets current basis status for columns and rows; arrays must be large enough to store the basis status */
SCIP_RETCODE SCIPlpiGetBase(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int*                  cstat,              /**< array to store column basis status, or NULL */
   int*                  rstat               /**< array to store row basis status, or NULL */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** sets current basis status for columns and rows */
SCIP_RETCODE SCIPlpiSetBase(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   const int*            cstat,              /**< array with column basis status */
   const int*            rstat               /**< array with row basis status */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(cstat != NULL);
   assert(rstat != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** returns the indices of the basic columns and rows; basic column n gives value n, basic row m gives value -1-m */
SCIP_RETCODE SCIPlpiGetBasisInd(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int*                  bind                /**< pointer to store basis indices ready to keep number of rows entries */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(bind != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** get row of inverse basis matrix B^-1
 *
 *  @note The LP interface defines slack variables to have coefficient +1. This means that if, internally, the LP solver
 *        uses a -1 coefficient, then rows associated with slacks variables whose coefficient is -1, should be negated;
 *        see also the explanation in lpi.h.
 */
SCIP_RETCODE SCIPlpiGetBInvRow(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   r,                  /**< row number */
   SCIP_Real*            coef,               /**< pointer to store the coefficients of the row */
   int*                  inds,               /**< array to store the non-zero indices, or NULL */
   int*                  ninds               /**< pointer to store the number of non-zero indices, or NULL
                                              *   (-1: if we do not store sparsity information) */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(coef != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** get column of inverse basis matrix B^-1
 *
 *  @note The LP interface defines slack variables to have coefficient +1. This means that if, internally, the LP solver
 *        uses a -1 coefficient, then rows associated with slacks variables whose coefficient is -1, should be negated;
 *        see also the explanation in lpi.h.
 */
SCIP_RETCODE SCIPlpiGetBInvCol(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   c,                  /**< column number of B^-1; this is NOT the number of the column in the LP;
                                              *   you have to call SCIPlpiGetBasisInd() to get the array which links the
                                              *   B^-1 column numbers to the row and column numbers of the LP!
                                              *   c must be between 0 and nrows-1, since the basis has the size
                                              *   nrows * nrows */
   SCIP_Real*            coef,               /**< pointer to store the coefficients of the column */
   int*                  inds,               /**< array to store the non-zero indices, or NULL */
   int*                  ninds               /**< pointer to store the number of non-zero indices, or NULL
                                              *   (-1: if we do not store sparsity information) */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(coef != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** get row of inverse basis matrix times constraint matrix B^-1 * A
 *
 *  @note The LP interface defines slack variables to have coefficient +1. This means that if, internally, the LP solver
 *        uses a -1 coefficient, then rows associated with slacks variables whose coefficient is -1, should be negated;
 *        see also the explanation in lpi.h.
 */
SCIP_RETCODE SCIPlpiGetBInvARow(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   r,                  /**< row number */
   const SCIP_Real*      binvrow,            /**< row in (A_B)^-1 from prior call to SCIPlpiGetBInvRow(), or NULL */
   SCIP_Real*            coef,               /**< vector to return coefficients of the row */
   int*                  inds,               /**< array to store the non-zero indices, or NULL */
   int*                  ninds               /**< pointer to store the number of non-zero indices, or NULL
                                              *   (-1: if we do not store sparsity information) */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(coef != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** get column of inverse basis matrix times constraint matrix B^-1 * A
 *
 *  @note The LP interface defines slack variables to have coefficient +1. This means that if, internally, the LP solver
 *        uses a -1 coefficient, then rows associated with slacks variables whose coefficient is -1, should be negated;
 *        see also the explanation in lpi.h.
 */
SCIP_RETCODE SCIPlpiGetBInvACol(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   c,                  /**< column number */
   SCIP_Real*            coef,               /**< vector to return coefficients of the column */
   int*                  inds,               /**< array to store the non-zero indices, or NULL */
   int*                  ninds               /**< pointer to store the number of non-zero indices, or NULL
                                              *   (-1: if we do not store sparsity information) */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(coef != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/**@} */




/*
 * LP State Methods
 */

/**@name LP State Methods */
/**@{ */

/** stores LPi state (like basis information) into lpistate object */
SCIP_RETCODE SCIPlpiGetState(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   BMS_BLKMEM*           blkmem,             /**< block memory */
   SCIP_LPISTATE**       lpistate            /**< pointer to LPi state information (like basis information) */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(blkmem != NULL);
   assert(lpistate != NULL);
   assert(blkmem != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** loads LPi state (like basis information) into solver; note that the LP might have been extended with additional
 *  columns and rows since the state was stored with SCIPlpiGetState()
 */
SCIP_RETCODE SCIPlpiSetState(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   BMS_BLKMEM*           blkmem,             /**< block memory */
   const SCIP_LPISTATE*  lpistate            /**< LPi state information (like basis information), or NULL */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(blkmem != NULL);
   assert(lpistate != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** clears current LPi state (like basis information) of the solver */
SCIP_RETCODE SCIPlpiClearState(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   return SCIP_OKAY;
}

/** frees LPi state information */
SCIP_RETCODE SCIPlpiFreeState(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   BMS_BLKMEM*           blkmem,             /**< block memory */
   SCIP_LPISTATE**       lpistate            /**< pointer to LPi state information (like basis information) */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(lpistate != NULL);
   assert(blkmem != NULL);
   return SCIP_OKAY;
}

/** checks, whether the given LP state contains simplex basis information */
SCIP_Bool SCIPlpiHasStateBasis(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_LPISTATE*        lpistate            /**< LP state information (like basis information), or NULL */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessageAbort();
   return FALSE;
}

/** reads LP state (like basis information from a file */
SCIP_RETCODE SCIPlpiReadState(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   const char*           fname               /**< file name */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(fname != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** writes LPi state (i.e. basis information) to a file */
SCIP_RETCODE SCIPlpiWriteState(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   const char*           fname               /**< file name */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(fname != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/**@} */




/*
 * LP Pricing Norms Methods
 */

/**@name LP Pricing Norms Methods */
/**@{ */

/** stores LPi pricing norms information
 *  @todo should we store norm information?
 */
SCIP_RETCODE SCIPlpiGetNorms(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   BMS_BLKMEM*           blkmem,             /**< block memory */
   SCIP_LPINORMS**       lpinorms            /**< pointer to LPi pricing norms information */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(blkmem != NULL);
   assert(lpinorms != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** loads LPi pricing norms into solver; note that the LP might have been extended with additional
 *  columns and rows since the state was stored with SCIPlpiGetNorms()
 */
SCIP_RETCODE SCIPlpiSetNorms(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   BMS_BLKMEM*           blkmem,             /**< block memory */
   const SCIP_LPINORMS*  lpinorms            /**< LPi pricing norms information, or NULL */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** frees pricing norms information */
SCIP_RETCODE SCIPlpiFreeNorms(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   BMS_BLKMEM*           blkmem,             /**< block memory */
   SCIP_LPINORMS**       lpinorms            /**< pointer to LPi pricing norms information, or NULL */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/**@} */




/*
 * Parameter Methods
 */

/**@name Parameter Methods */
/**@{ */

/** gets integer parameter of LP */
SCIP_RETCODE SCIPlpiGetIntpar(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_LPPARAM          type,               /**< parameter number */
   int*                  ival                /**< buffer to store the parameter value */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(ival != NULL);
   return SCIP_PARAMETERUNKNOWN;
}

/** sets integer parameter of LP */
SCIP_RETCODE SCIPlpiSetIntpar(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_LPPARAM          type,               /**< parameter number */
   int                   ival                /**< parameter value */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   return SCIP_PARAMETERUNKNOWN;
}

/** gets floating point parameter of LP */
SCIP_RETCODE SCIPlpiGetRealpar(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_LPPARAM          type,               /**< parameter number */
   SCIP_Real*            dval                /**< buffer to store the parameter value */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(dval != NULL);
   return SCIP_PARAMETERUNKNOWN;
}

/** sets floating point parameter of LP */
SCIP_RETCODE SCIPlpiSetRealpar(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_LPPARAM          type,               /**< parameter number */
   SCIP_Real             dval                /**< parameter value */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   return SCIP_PARAMETERUNKNOWN;
}

/** interrupts the currently ongoing lp solve or disables the interrupt */
SCIP_RETCODE SCIPlpiInterrupt(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_Bool             interrupt           /**< TRUE if interrupt should be set, FALSE if it should be disabled */
   )
{
   /*lint --e{715}*/
   assert(lpi != NULL);

   return SCIP_OKAY;
}

/**@} */

/*
 * Numerical Methods
 */

/**@name Numerical Methods */
/**@{ */

/** returns value treated as infinity in the LP solver */
SCIP_Real SCIPlpiInfinity(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   return LPIINFINITY;
}

/** checks if given value is treated as infinity in the LP solver */
SCIP_Bool SCIPlpiIsInfinity(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_Real             val                 /**< value to be checked for infinity */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   if( val >= LPIINFINITY )
      return TRUE;
   return FALSE;
}

/**@} */




/*
 * File Interface Methods
 */

/**@name File Interface Methods */
/**@{ */

/** reads LP from a file */
SCIP_RETCODE SCIPlpiReadLP(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   const char*           fname               /**< file name */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(fname != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/** writes LP to a file */
SCIP_RETCODE SCIPlpiWriteLP(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   const char*           fname               /**< file name */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   errorMessage();
   return SCIP_PLUGINNOTFOUND;
}

/**@} */