Detailed Description
methods for storing separated cuts
Definition in file sepastore.c.
#include <assert.h>
#include "scip/def.h"
#include "scip/set.h"
#include "scip/stat.h"
#include "scip/lp.h"
#include "scip/var.h"
#include "scip/tree.h"
#include "scip/reopt.h"
#include "scip/sepastore.h"
#include "scip/event.h"
#include "scip/sepa.h"
#include "scip/cons.h"
#include "scip/debug.h"
#include "scip/scip.h"
#include "scip/cuts.h"
#include "scip/cutsel.h"
#include "scip/struct_event.h"
#include "scip/struct_sepastore.h"
#include "scip/misc.h"
Go to the source code of this file.
Function Documentation
◆ sepastoreEnsureCutsMem()
|
static |
resizes cuts and score arrays to be able to store at least num entries
- Parameters
-
sepastore separation storage set global SCIP settings num minimal number of slots in array
Definition at line 64 of file sepastore.c.
References BMSreallocMemoryArray, SCIP_SepaStore::cuts, SCIP_SepaStore::cutssize, NULL, SCIP_ALLOC, SCIP_OKAY, and SCIPsetCalcMemGrowSize().
Referenced by SCIPsepastoreAddCut().
◆ SCIPsepastoreCreate()
SCIP_RETCODE SCIPsepastoreCreate | ( | SCIP_SEPASTORE ** | sepastore, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set | ||
) |
creates separation storage
- Parameters
-
sepastore pointer to store separation storage blkmem block memory set global SCIP settings
Definition at line 87 of file sepastore.c.
References BMSallocMemory, FALSE, NULL, SCIP_ALLOC, SCIP_CALL, SCIP_OKAY, SCIPrandomCreate(), and SCIPsetInitializeRandomSeed().
Referenced by initSolve().
◆ SCIPsepastoreFree()
SCIP_RETCODE SCIPsepastoreFree | ( | SCIP_SEPASTORE ** | sepastore, |
BMS_BLKMEM * | blkmem | ||
) |
frees separation storage
- Parameters
-
sepastore pointer to store separation storage blkmem block memory
Definition at line 115 of file sepastore.c.
References BMSfreeMemory, BMSfreeMemoryArrayNull, NULL, SCIP_OKAY, and SCIPrandomFree().
Referenced by freeReoptSolve(), and freeSolve().
◆ SCIPsepastoreStartInitialLP()
void SCIPsepastoreStartInitialLP | ( | SCIP_SEPASTORE * | sepastore | ) |
informs separation storage that the setup of the initial LP starts now
- Parameters
-
sepastore separation storage
Definition at line 132 of file sepastore.c.
References SCIP_SepaStore::initiallp, SCIP_SepaStore::ncuts, NULL, and TRUE.
Referenced by SCIPconstructCurrentLP(), and SCIPinitConssLP().
◆ SCIPsepastoreEndInitialLP()
void SCIPsepastoreEndInitialLP | ( | SCIP_SEPASTORE * | sepastore | ) |
informs separation storage that the setup of the initial LP is now finished
- Parameters
-
sepastore separation storage
Definition at line 144 of file sepastore.c.
References FALSE, SCIP_SepaStore::initiallp, SCIP_SepaStore::ncuts, and NULL.
Referenced by SCIPconstructCurrentLP(), and SCIPinitConssLP().
◆ SCIPsepastoreStartForceCuts()
void SCIPsepastoreStartForceCuts | ( | SCIP_SEPASTORE * | sepastore | ) |
informs separation storage that the following cuts should be used in any case
- Parameters
-
sepastore separation storage
Definition at line 156 of file sepastore.c.
References SCIP_SepaStore::forcecuts, NULL, and TRUE.
Referenced by enforceConstraints().
◆ SCIPsepastoreEndForceCuts()
void SCIPsepastoreEndForceCuts | ( | SCIP_SEPASTORE * | sepastore | ) |
informs separation storage that the following cuts should no longer be used in any case
- Parameters
-
sepastore separation storage
Definition at line 167 of file sepastore.c.
References FALSE, SCIP_SepaStore::forcecuts, and NULL.
Referenced by enforceConstraints().
◆ sepastoreIsCutRedundant()
|
static |
checks cut for redundancy due to activity bounds
- Parameters
-
sepastore separation storage set global SCIP settings stat problem statistics data cut separated cut
Definition at line 179 of file sepastore.c.
References FALSE, NULL, SCIP_Real, SCIProwGetLhs(), SCIProwGetMaxActivity(), SCIProwGetMinActivity(), SCIProwGetName(), SCIProwGetRhs(), SCIProwIsModifiable(), SCIPsetDebugMsg, SCIPsetIsInfinity(), SCIPsetIsLE(), and TRUE.
Referenced by SCIPsepastoreAddCut().
◆ sepastoreIsCutRedundantOrInfeasible()
|
static |
checks cut for redundancy or infeasibility due to activity bounds
- Parameters
-
sepastore separation storage set global SCIP settings stat problem statistics data cut separated cut infeasible pointer to store whether the cut has been detected to be infeasible
Definition at line 218 of file sepastore.c.
References FALSE, NULL, SCIP_Real, SCIProwGetLhs(), SCIProwGetMaxActivity(), SCIProwGetMinActivity(), SCIProwGetName(), SCIProwGetRhs(), SCIProwIsModifiable(), SCIPsetDebugMsg, SCIPsetIsFeasNegative(), SCIPsetIsFeasPositive(), SCIPsetIsInfinity(), SCIPsetIsLE(), and TRUE.
Referenced by SCIPsepastoreAddCut().
◆ sepastoreIsBdchgApplicable()
checks whether a cut with only one variable can be applied as boundchange
This is the case if the bound change would prove infeasibility (w.r.t feastol), or if the new bound is at least epsilon better than the old bound. In the latter case, also the opposite bound has to be taken into account.
- Parameters
-
set global SCIP settings cut cut with a single variable
Definition at line 275 of file sepastore.c.
References FALSE, MAX, NULL, SCIP_Bool, SCIP_Real, SCIPcolGetVar(), SCIProwGetCols(), SCIProwGetConstant(), SCIProwGetLhs(), SCIProwGetNNonz(), SCIProwGetRhs(), SCIProwGetVals(), SCIProwIsLocal(), SCIProwIsModifiable(), SCIPsetIsFeasGT(), SCIPsetIsFeasLT(), SCIPsetIsFeasZero(), SCIPsetIsGT(), SCIPsetIsInfinity(), SCIPsetIsLT(), SCIPsetIsZero(), SCIPvarAdjustLb(), SCIPvarAdjustUb(), SCIPvarGetLbGlobal(), SCIPvarGetLbLocal(), SCIPvarGetUbGlobal(), SCIPvarGetUbLocal(), and TRUE.
Referenced by SCIPsepastoreAddCut(), SCIPsepastoreApplyCuts(), and SCIPsepastoreIsCutApplicable().
◆ sepastoreDelCut()
|
static |
removes a non-forced cut from the separation storage
- Parameters
-
sepastore separation storage blkmem block memory set global SCIP settings eventqueue event queue eventfilter event filter for global events lp LP data pos position of cut to delete
Definition at line 379 of file sepastore.c.
References SCIP_SepaStore::cuts, SCIP_EventFilter::eventmask, SCIP_Row::fromcutpool, SCIP_SepaStore::initiallp, SCIP_EventFilter::len, SCIP_SepaStore::ncuts, SCIP_SepaStore::ncutsadded, SCIP_SepaStore::ncutsaddeddirect, SCIP_SepaStore::ncutsaddedviapool, SCIP_SepaStore::nforcedcuts, NULL, SCIP_Row::origintype, SCIP_CALL, SCIP_EVENTTYPE_ROWDELETEDSEPA, SCIP_OKAY, SCIP_ROWORIGINTYPE_SEPA, SCIPeventCreateRowDeletedSepa(), SCIPeventqueueAdd(), SCIProwGetOriginSepa(), SCIProwRelease(), and SCIPsepaDecNCutsAdded().
Referenced by SCIPsepastoreRemoveInefficaciousCuts().
◆ SCIPsepastoreAddCut()
SCIP_RETCODE SCIPsepastoreAddCut | ( | SCIP_SEPASTORE * | sepastore, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat, | ||
SCIP_EVENTQUEUE * | eventqueue, | ||
SCIP_EVENTFILTER * | eventfilter, | ||
SCIP_LP * | lp, | ||
SCIP_ROW * | cut, | ||
SCIP_Bool | forcecut, | ||
SCIP_Bool | root, | ||
SCIP_Bool * | infeasible | ||
) |
adds cut to separation storage and captures it
- Parameters
-
sepastore separation storage blkmem block memory set global SCIP settings stat problem statistics data eventqueue event queue eventfilter event filter for global events lp LP data cut separated cut forcecut should the cut be forced to enter the LP? root are we at the root node? infeasible pointer to store whether the cut is infeasible
Definition at line 428 of file sepastore.c.
References SCIP_SepaStore::cuts, SCIP_SepaStore::cutssize, SCIP_EventFilter::eventmask, FALSE, SCIP_SepaStore::forcecuts, SCIP_Row::fromcutpool, SCIP_SepaStore::initiallp, SCIP_EventFilter::len, SCIP_SepaStore::ncuts, SCIP_SepaStore::ncutsadded, SCIP_SepaStore::ncutsaddeddirect, SCIP_SepaStore::ncutsaddedviapool, SCIP_SepaStore::ncutsfoundround, SCIP_SepaStore::nforcedcuts, NULL, SCIP_Row::origintype, SCIP_Bool, SCIP_CALL, SCIP_EVENTTYPE_ROWADDEDSEPA, SCIP_EVENTTYPE_ROWDELETEDSEPA, SCIP_OKAY, SCIP_ROWORIGINTYPE_SEPA, SCIPdebugCheckRow, SCIPeventCreateRowAddedSepa(), SCIPeventCreateRowDeletedSepa(), SCIPeventqueueAdd(), SCIProwCapture(), SCIProwChgLocal(), SCIProwGetLhs(), SCIProwGetName(), SCIProwGetNNonz(), SCIProwGetOriginSepa(), SCIProwGetRhs(), SCIProwIsLocal(), SCIProwIsModifiable(), SCIProwRelease(), SCIPsepaDecNCutsAdded(), SCIPsepaIncNCutsAdded(), SCIPsetDebugMsg, SCIPsetGetSepaMaxcuts(), SCIPsetIsInfinity(), sepastoreEnsureCutsMem(), sepastoreIsBdchgApplicable(), sepastoreIsCutRedundant(), and sepastoreIsCutRedundantOrInfeasible().
Referenced by SCIPaddRow(), SCIPconstructCurrentLP(), SCIPcutpoolSeparate(), and SCIPreoptApplyCuts().
◆ sepastoreApplyLb()
|
static |
applies a lower bound change
- Parameters
-
sepastore separation storage blkmem block memory set global SCIP settings stat problem statistics transprob transformed problem origprob original problem tree branch and bound tree reopt reoptimization data structure lp LP data branchcand branching candidate storage eventqueue event queue cliquetable clique table data structure var problem variable bound new lower bound of variable local is it a local bound change? (otherwise global) applied pointer to store whether the domain change was applied cutoff pointer to store TRUE, if an infeasibility has been detected
Definition at line 584 of file sepastore.c.
References FALSE, NULL, SCIP_BOUNDTYPE_LOWER, SCIP_CALL, SCIP_OKAY, SCIPnodeAddBoundchg(), SCIPnodeCutoff(), SCIPsetDebugMsg, SCIPsetIsFeasLE(), SCIPsetIsGT(), SCIPsetIsInfinity(), SCIPtreeGetCurrentNode(), SCIPtreeGetRootNode(), SCIPvarAdjustLb(), SCIPvarGetLbGlobal(), SCIPvarGetLbLocal(), SCIPvarGetName(), SCIPvarGetUbGlobal(), SCIPvarGetUbLocal(), and TRUE.
Referenced by sepastoreApplyBdchg().
◆ sepastoreApplyUb()
|
static |
applies an upper bound change
- Parameters
-
sepastore separation storage blkmem block memory set global SCIP settings stat problem statistics transprob transformed problem origprob original problem tree branch and bound tree reopt reoptimization data structure lp LP data branchcand branching candidate storage eventqueue event queue cliquetable clique table data structure var problem variable bound new upper bound of variable local is it a local bound change? (otherwise global) applied pointer to store whether the domain change was applied cutoff pointer to store TRUE, if an infeasibility has been detected
Definition at line 675 of file sepastore.c.
References FALSE, NULL, SCIP_BOUNDTYPE_UPPER, SCIP_CALL, SCIP_OKAY, SCIPnodeAddBoundchg(), SCIPnodeCutoff(), SCIPsetDebugMsg, SCIPsetIsFeasGE(), SCIPsetIsInfinity(), SCIPsetIsLT(), SCIPtreeGetCurrentNode(), SCIPtreeGetRootNode(), SCIPvarAdjustUb(), SCIPvarGetLbGlobal(), SCIPvarGetLbLocal(), SCIPvarGetName(), SCIPvarGetUbGlobal(), SCIPvarGetUbLocal(), and TRUE.
Referenced by sepastoreApplyBdchg().
◆ sepastoreApplyBdchg()
|
static |
applies a cut that is a bound change directly as bound change instead of adding it as row to the LP
- Parameters
-
sepastore separation storage blkmem block memory set global SCIP settings stat problem statistics transprob transformed problem origprob original problem tree branch and bound tree reopt reoptimization data structure lp LP data branchcand branching candidate storage eventqueue event queue cliquetable clique table data structure cut cut with a single variable applied pointer to store whether the domain change was applied cutoff pointer to store whether an empty domain was created
Definition at line 766 of file sepastore.c.
References FALSE, SCIP_SepaStore::initiallp, SCIP_SepaStore::ncutsapplied, NULL, SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIPcolGetVar(), SCIProwGetCols(), SCIProwGetConstant(), SCIProwGetLhs(), SCIProwGetNNonz(), SCIProwGetRhs(), SCIProwGetVals(), SCIProwIsLocal(), SCIProwIsModifiable(), SCIPsetIsFeasZero(), SCIPsetIsInfinity(), SCIPsetIsZero(), sepastoreApplyLb(), and sepastoreApplyUb().
Referenced by SCIPsepastoreApplyCuts().
◆ sepastoreApplyCut()
|
static |
applies the given cut to the LP and updates the orthogonalities and scores of remaining cuts
- Parameters
-
sepastore separation storage blkmem block memory set global SCIP settings eventqueue event queue eventfilter global event filter lp LP data cut cut to apply to the LP depth depth of current node ncutsapplied pointer to count the number of applied cuts
Definition at line 862 of file sepastore.c.
References SCIP_Row::fromcutpool, SCIP_SepaStore::initiallp, SCIP_SepaStore::ncutsapplied, NULL, SCIP_Row::origin, SCIP_Row::origintype, SCIP_CALL, SCIP_INVALIDDATA, SCIP_OKAY, SCIP_ROWORIGINTYPE_CONS, SCIP_ROWORIGINTYPE_CONSHDLR, SCIP_ROWORIGINTYPE_REOPT, SCIP_ROWORIGINTYPE_SEPA, SCIP_ROWORIGINTYPE_UNSPEC, SCIPconsGetHdlr(), SCIPconshdlrIncNAppliedCuts(), SCIPerrorMessage, SCIPlpAddRow(), SCIProwIsInLP(), and SCIPsepaIncNCutsApplied().
Referenced by SCIPsepastoreApplyCuts().
◆ SCIPsepastoreApplyCuts()
SCIP_RETCODE SCIPsepastoreApplyCuts | ( | SCIP_SEPASTORE * | sepastore, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat, | ||
SCIP_PROB * | transprob, | ||
SCIP_PROB * | origprob, | ||
SCIP_TREE * | tree, | ||
SCIP_REOPT * | reopt, | ||
SCIP_LP * | lp, | ||
SCIP_BRANCHCAND * | branchcand, | ||
SCIP_EVENTQUEUE * | eventqueue, | ||
SCIP_EVENTFILTER * | eventfilter, | ||
SCIP_CLIQUETABLE * | cliquetable, | ||
SCIP_Bool | root, | ||
SCIP_EFFICIACYCHOICE | efficiacychoice, | ||
SCIP_Bool * | cutoff | ||
) |
adds cuts to the LP and clears separation storage
- Parameters
-
sepastore separation storage blkmem block memory set global SCIP settings stat problem statistics transprob transformed problem origprob original problem tree branch and bound tree reopt reoptimization data structure lp LP data branchcand branching candidate storage eventqueue event queue eventfilter global event filter cliquetable clique table data structure root are we at the root node? efficiacychoice type of solution to base efficiacy computation on cutoff pointer to store whether an empty domain was created
Definition at line 921 of file sepastore.c.
References SCIP_SepaStore::cuts, FALSE, SCIP_SepaStore::initiallp, SCIP_SepaStore::ncuts, SCIP_SepaStore::nforcedcuts, NULL, SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIP_UNUSED, SCIPcutselsSelect(), SCIPnodeGetDepth(), SCIProwGetLPEfficacy(), SCIProwGetName(), SCIProwGetNNonz(), SCIProwIsModifiable(), SCIPsepastoreClearCuts(), SCIPsetDebugMsg, SCIPsetGetSepaMaxcuts(), SCIPsetIsFeasPositive(), SCIPtreeGetCurrentNode(), sepastoreApplyBdchg(), sepastoreApplyCut(), and sepastoreIsBdchgApplicable().
Referenced by applyCuts(), priceAndCutLoop(), SCIPapplyCutsProbing(), SCIPconstructCurrentLP(), and SCIPinitConssLP().
◆ SCIPsepastoreClearCuts()
SCIP_RETCODE SCIPsepastoreClearCuts | ( | SCIP_SEPASTORE * | sepastore, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_EVENTQUEUE * | eventqueue, | ||
SCIP_EVENTFILTER * | eventfilter, | ||
SCIP_LP * | lp | ||
) |
clears the separation storage without adding the cuts to the LP
- Parameters
-
sepastore separation storage blkmem block memory set global SCIP settings eventqueue event queue eventfilter event filter for global events lp LP data
Definition at line 1027 of file sepastore.c.
References BMSfreeMemoryArrayNull, SCIP_SepaStore::cuts, SCIP_SepaStore::cutssize, SCIP_EventFilter::eventmask, SCIP_SepaStore::initiallp, SCIP_EventFilter::len, SCIP_SepaStore::ncuts, SCIP_SepaStore::ncutsfoundround, SCIP_SepaStore::nforcedcuts, NULL, SCIP_CALL, SCIP_EVENTTYPE_ROWDELETEDSEPA, SCIP_OKAY, SCIPeventCreateRowDeletedSepa(), SCIPeventqueueAdd(), SCIProwRelease(), and SCIPsetDebugMsg.
Referenced by applyCuts(), priceAndCutLoop(), SCIPclearCuts(), SCIPconstructCurrentLP(), SCIPinitConssLP(), and SCIPsepastoreApplyCuts().
◆ SCIPsepastoreRemoveInefficaciousCuts()
SCIP_RETCODE SCIPsepastoreRemoveInefficaciousCuts | ( | SCIP_SEPASTORE * | sepastore, |
BMS_BLKMEM * | blkmem, | ||
SCIP_SET * | set, | ||
SCIP_STAT * | stat, | ||
SCIP_EVENTQUEUE * | eventqueue, | ||
SCIP_EVENTFILTER * | eventfilter, | ||
SCIP_LP * | lp, | ||
SCIP_Bool | root, | ||
SCIP_EFFICIACYCHOICE | efficiacychoice | ||
) |
removes cuts that are inefficacious w.r.t. the current LP solution from separation storage without adding the cuts to the LP
- Parameters
-
sepastore separation storage blkmem block memory set global SCIP settings stat problem statistics data eventqueue event queue eventfilter event filter for global events lp LP data root are we at the root node? efficiacychoice type of solution to base efficiacy computation on
Definition at line 1073 of file sepastore.c.
References SCIP_SepaStore::cuts, SCIP_SepaStore::nforcedcuts, NULL, SCIP_CALL, SCIP_EFFICIACYCHOICE_LP, SCIP_EFFICIACYCHOICE_NLP, SCIP_EFFICIACYCHOICE_RELAX, SCIP_INVALIDCALL, SCIP_OKAY, SCIP_Real, SCIPerrorMessage, SCIProwGetLPEfficacy(), SCIProwGetNLPEfficacy(), SCIProwGetRelaxEfficacy(), SCIPsetDebugMsg, SCIPsetIsEfficacious(), and sepastoreDelCut().
Referenced by SCIPremoveInefficaciousCuts().
◆ SCIPsepastoreIsCutApplicable()
indicates whether a cut is applicable
A cut is applicable if it is modifiable, not a bound change, or a bound change that changes bounds by at least epsilon.
- Parameters
-
set global SCIP settings cut cut to check
Definition at line 1130 of file sepastore.c.
References SCIProwGetNNonz(), SCIProwIsModifiable(), and sepastoreIsBdchgApplicable().
Referenced by SCIPisCutApplicable().
◆ SCIPsepastoreGetCuts()
SCIP_ROW** SCIPsepastoreGetCuts | ( | SCIP_SEPASTORE * | sepastore | ) |
get cuts in the separation storage
- Parameters
-
sepastore separation storage
Definition at line 1139 of file sepastore.c.
References SCIP_SepaStore::cuts, and NULL.
Referenced by SCIPgetCuts().
◆ SCIPsepastoreGetNCuts()
int SCIPsepastoreGetNCuts | ( | SCIP_SEPASTORE * | sepastore | ) |
get number of cuts in the separation storage
- Parameters
-
sepastore separation storage
Definition at line 1149 of file sepastore.c.
References SCIP_SepaStore::ncuts, and NULL.
Referenced by applyCuts(), cutpoolSeparate(), enforceConstraints(), priceAndCutLoop(), propAndSolve(), SCIPbranchruleExecExternSol(), SCIPbranchruleExecLPSol(), SCIPconshdlrEnforceLPSol(), SCIPconshdlrEnforceRelaxSol(), SCIPconshdlrSeparateLP(), SCIPconshdlrSeparateSol(), SCIPcutpoolSeparate(), SCIPendProbing(), SCIPgetNCuts(), SCIPsepaExecLP(), SCIPsepaExecSol(), separationRoundLP(), separationRoundSol(), solveNode(), and solveNodeLP().
◆ SCIPsepastoreGetNCutsAdded()
int SCIPsepastoreGetNCutsAdded | ( | SCIP_SEPASTORE * | sepastore | ) |
gets the total number of cutting planes added to the separation storage; this is equal to the sum of added cuts directly and via the pool.
- Parameters
-
sepastore separation storage
Definition at line 1160 of file sepastore.c.
References SCIP_SepaStore::ncutsadded, and NULL.
Referenced by SCIPcutpoolSeparate(), and SCIPgetNCutsFound().
◆ SCIPsepastoreGetNCutsAddedViaPool()
int SCIPsepastoreGetNCutsAddedViaPool | ( | SCIP_SEPASTORE * | sepastore | ) |
gets the number of cutting planes added to the separation storage from the cut pool
- Parameters
-
sepastore separation storage
Definition at line 1170 of file sepastore.c.
References SCIP_SepaStore::ncutsaddedviapool, and NULL.
◆ SCIPsepastoreGetNCutsAddedDirect()
int SCIPsepastoreGetNCutsAddedDirect | ( | SCIP_SEPASTORE * | sepastore | ) |
gets the number of cutting planes added to the separation storage directly
- Parameters
-
sepastore separation storage
Definition at line 1180 of file sepastore.c.
References SCIP_SepaStore::ncutsaddeddirect, and NULL.
◆ SCIPsepastoreGetNCutsFoundRound()
int SCIPsepastoreGetNCutsFoundRound | ( | SCIP_SEPASTORE * | sepastore | ) |
get number of cuts found so far in current separation round
- Parameters
-
sepastore separation storage
Definition at line 1190 of file sepastore.c.
References SCIP_SepaStore::ncutsfoundround, and NULL.
Referenced by SCIPgetNCutsFoundRound().
◆ SCIPsepastoreGetNCutsApplied()
int SCIPsepastoreGetNCutsApplied | ( | SCIP_SEPASTORE * | sepastore | ) |
gets the total number of cutting planes applied to the LP
- Parameters
-
sepastore separation storage
Definition at line 1200 of file sepastore.c.
References SCIP_SepaStore::ncutsapplied, and NULL.
Referenced by applyCuts(), SCIPgetNCutsApplied(), and solveNodeLP().