objsepa.h

Go to the documentation of this file.

/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/*                                                                           */
/*                  This file is part of the program and library             */
/*         SCIP --- Solving Constraint Integer Programs                      */
/*                                                                           */
/*  Copyright (c) 2002-2024 Zuse Institute Berlin (ZIB)                      */
/*                                                                           */
/*  Licensed under the Apache License, Version 2.0 (the "License");          */
/*  you may not use this file except in compliance with the License.         */
/*  You may obtain a copy of the License at                                  */
/*                                                                           */
/*      http://www.apache.org/licenses/LICENSE-2.0                           */
/*                                                                           */
/*  Unless required by applicable law or agreed to in writing, software      */
/*  distributed under the License is distributed on an "AS IS" BASIS,        */
/*  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. */
/*  See the License for the specific language governing permissions and      */
/*  limitations under the License.                                           */
/*                                                                           */
/*  You should have received a copy of the Apache-2.0 license                */
/*  along with SCIP; see the file LICENSE. If not visit scipopt.org.         */
/*                                                                           */
/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */

/**@file   objsepa.h
 * @brief  C++ wrapper for cut separators
 * @author Tobias Achterberg
 */

/*---+----1----+----2----+----3----+----4----+----5----+----6----+----7----+----8----+----9----+----0----+----1----+----2*/

#ifndef __SCIP_OBJSEPA_H__
#define __SCIP_OBJSEPA_H__

#include <cstring>
#include <utility>

#include "scip/scip.h"
#include "objscip/objcloneable.h"

namespace scip
{

/** @brief C++ wrapper for cut separators
 *
 *  This class defines the interface for cut separators implemented in C++. 
 *
 *  - \ref SEPA "Instructions for implementing a cut separator"
 *  - \ref SEPARATORS "List of available cut separators"
 *  - \ref type_sepa.h "Corresponding C interface"
 */
class ObjSepa : public ObjCloneable
{
public:
   /*lint --e{1540}*/

   /** SCIP data structure */
   SCIP* scip_;

   /** name of the cut separator */
   char* scip_name_;

   /** description of the cut separator */
   char* scip_desc_;

   /** default priority of the cut separator */
   const int scip_priority_;

   /** frequency for calling separator */
   const int scip_freq_;

   /** maximal relative distance from current node's dual bound to primal bound compared to best node's dual bound for applying
    *  separation (0.0: only on current best node, 1.0: on all nodes)
    */
   const SCIP_Real scip_maxbounddist_;

   /** does the separator use a secondary SCIP instance? */
   const SCIP_Bool scip_usessubscip_;

   /** should separator be delayed, if other separators found cuts? */
   const SCIP_Bool scip_delay_;

   /** default constructor */
   ObjSepa(
      SCIP*              scip,               /**< SCIP data structure */
      const char*        name,               /**< name of cut separator */
      const char*        desc,               /**< description of cut separator */
      int                priority,           /**< priority of the cut separator */
      int                freq,               /**< frequency for calling separator */
      SCIP_Real          maxbounddist,       /**< maximal relative distance from current node's dual bound to primal bound compared
                                              *   to best node's dual bound for applying separation */
      SCIP_Bool          usessubscip,        /**< does the separator use a secondary SCIP instance? */
      SCIP_Bool          delay               /**< should separator be delayed, if other separators found cuts? */
      )
      : scip_(scip),
        scip_name_(0),
        scip_desc_(0),
        scip_priority_(priority),
        scip_freq_(freq),
        scip_maxbounddist_(maxbounddist),
        scip_usessubscip_(usessubscip),
        scip_delay_(delay)
   {
      /* the macro SCIPduplicateMemoryArray does not need the first argument: */
      SCIP_CALL_ABORT( SCIPduplicateMemoryArray(scip_, &scip_name_, name, std::strlen(name)+1) );
      SCIP_CALL_ABORT( SCIPduplicateMemoryArray(scip_, &scip_desc_, desc, std::strlen(desc)+1) );
   }

   /** copy constructor */
   ObjSepa(const ObjSepa& o)
       : ObjSepa(o.scip_, o.scip_name_, o.scip_desc_, o.scip_priority_, o.scip_freq_, o.scip_maxbounddist_,
                 o.scip_usessubscip_, o.scip_delay_)
   {
   }

   /** move constructor */
   ObjSepa(ObjSepa&& o)
       : scip_(o.scip_),
         scip_name_(0),
         scip_desc_(0),
         scip_priority_(o.scip_priority_),
         scip_freq_(o.scip_freq_),
         scip_maxbounddist_(o.scip_maxbounddist_),
         scip_usessubscip_(o.scip_usessubscip_),
         scip_delay_(o.scip_delay_)
   {
      std::swap(scip_name_, o.scip_name_);
      std::swap(scip_desc_, o.scip_desc_);
   }

   /** destructor */
   virtual ~ObjSepa()
   {
      /* the macro SCIPfreeMemoryArray does not need the first argument: */
      /*lint --e{64}*/
      SCIPfreeMemoryArray(scip_, &scip_name_);
      SCIPfreeMemoryArray(scip_, &scip_desc_);
   }

   /** assignment of polymorphic classes causes slicing and is therefore disabled. */
   ObjSepa& operator=(const ObjSepa& o) = delete;

   /** assignment of polymorphic classes causes slicing and is therefore disabled. */
   ObjSepa& operator=(ObjSepa&& o) = delete;

   /** destructor of cut separator to free user data (called when SCIP is exiting) 
    *
    *  @see SCIP_DECL_SEPAFREE(x) in @ref type_sepa.h
    */
   virtual SCIP_DECL_SEPAFREE(scip_free)
   {  /*lint --e{715}*/
      return SCIP_OKAY;
   }

   /** initialization method of cut separator (called after problem was transformed) 
    *
    *  @see SCIP_DECL_SEPAINIT(x) in @ref type_sepa.h
    */
   virtual SCIP_DECL_SEPAINIT(scip_init)
   {  /*lint --e{715}*/
      return SCIP_OKAY;
   }

   /** deinitialization method of cut separator (called before transformed problem is freed)
    *
    *  @see SCIP_DECL_SEPAEXIT(x) in @ref type_sepa.h
    */
   virtual SCIP_DECL_SEPAEXIT(scip_exit)
   {  /*lint --e{715}*/
      return SCIP_OKAY;
   }

   /** solving process initialization method of separator (called when branch and bound process is about to begin)
    *
    *  @see SCIP_DECL_SEPAINITSOL(x) in @ref type_sepa.h
    */
   virtual SCIP_DECL_SEPAINITSOL(scip_initsol)
   {  /*lint --e{715}*/
      return SCIP_OKAY;
   }

   /** solving process deinitialization method of separator (called before branch and bound process data is freed)
    *
    *  @see SCIP_DECL_SEPAEXITSOL(x) in @ref type_sepa.h
    */
   virtual SCIP_DECL_SEPAEXITSOL(scip_exitsol)
   {  /*lint --e{715}*/
      return SCIP_OKAY;
   }

   /** LP solution separation method of separator
    *
    *  @see SCIP_DECL_SEPAEXECLP(x) in @ref type_sepa.h
    */
   virtual SCIP_DECL_SEPAEXECLP(scip_execlp)
   {  /*lint --e{715}*/
      assert(result != NULL);
      *result = SCIP_DIDNOTRUN;
      return SCIP_OKAY;
   }

   /** arbitrary primal solution separation method of separator
    *
    *  @see SCIP_DECL_SEPAEXECSOL(x) in @ref type_sepa.h
    */
   virtual SCIP_DECL_SEPAEXECSOL(scip_execsol)
   {  /*lint --e{715}*/
      assert(result != NULL);
      *result = SCIP_DIDNOTRUN;
      return SCIP_OKAY;
   }
};

} /* namespace scip */



/** creates the cut separator for the given cut separator object and includes it in SCIP
 *
 *  The method should be called in one of the following ways:
 *
 *   1. The user is resposible of deleting the object:
 *       SCIP_CALL( SCIPcreate(&scip) );
 *       ...
 *       MySepa* mysepa = new MySepa(...);
 *       SCIP_CALL( SCIPincludeObjSepa(scip, &mysepa, FALSE) );
 *       ...
 *       SCIP_CALL( SCIPfree(&scip) );
 *       delete mysepa;    // delete sepa AFTER SCIPfree() !
 *
 *   2. The object pointer is passed to SCIP and deleted by SCIP in the SCIPfree() call:
 *       SCIP_CALL( SCIPcreate(&scip) );
 *       ...
 *       SCIP_CALL( SCIPincludeObjSepa(scip, new MySepa(...), TRUE) );
 *       ...
 *       SCIP_CALL( SCIPfree(&scip) );  // destructor of MySepa is called here
 */
SCIP_EXPORT
SCIP_RETCODE SCIPincludeObjSepa(
   SCIP*                 scip,               /**< SCIP data structure */
   scip::ObjSepa*        objsepa,            /**< cut separator object */
   SCIP_Bool             deleteobject        /**< should the cut separator object be deleted when cut separator is freed? */
   );

/** returns the sepa object of the given name, or 0 if not existing */
SCIP_EXPORT
scip::ObjSepa* SCIPfindObjSepa(
   SCIP*                 scip,               /**< SCIP data structure */
   const char*           name                /**< name of cut separator */
   );

/** returns the sepa object for the given cut separator */
SCIP_EXPORT
scip::ObjSepa* SCIPgetObjSepa(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SEPA*            sepa                /**< cut separator */
   );

#endif