ConshdlrSubtour.h

Go to the documentation of this file.

/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/*                                                                           */
/*                  This file is part of the program and library             */
/*         SCIP --- Solving Constraint Integer Programs                      */
/*                                                                           */
/*  Copyright (c) 2002-2024 Zuse Institute Berlin (ZIB)                      */
/*                                                                           */
/*  Licensed under the Apache License, Version 2.0 (the "License");          */
/*  you may not use this file except in compliance with the License.         */
/*  You may obtain a copy of the License at                                  */
/*                                                                           */
/*      http://www.apache.org/licenses/LICENSE-2.0                           */
/*                                                                           */
/*  Unless required by applicable law or agreed to in writing, software      */
/*  distributed under the License is distributed on an "AS IS" BASIS,        */
/*  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. */
/*  See the License for the specific language governing permissions and      */
/*  limitations under the License.                                           */
/*                                                                           */
/*  You should have received a copy of the Apache-2.0 license                */
/*  along with SCIP; see the file LICENSE. If not visit scipopt.org.         */
/*                                                                           */
/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
/**@file   ConshdlrSubtour.h
 * @brief  C++ constraint handler for TSP subtour elimination constraints
 * @author Timo Berthold
 */
 
/*---+----1----+----2----+----3----+----4----+----5----+----6----+----7----+----8----+----9----+----0----+----1----+----2*/
 
#ifndef __TSPCONSHDLRSUBTOUR_H__
#define __TSPCONSHDLRSUBTOUR_H__
 
#include "objscip/objscip.h"
#include "ProbDataTSP.h"
 
namespace tsp
{
 
/** C++ constraint handler for TSP subtour elimination constraints */
class ConshdlrSubtour : public scip::ObjConshdlr
{
public:
   /** default constructor */
   ConshdlrSubtour(
      SCIP* scip
      )
      : ObjConshdlr(scip, "subtour", "TSP subtour elimination constraints",
         1000000, -2000000, -2000000, 1, -1, 1, 0,
         FALSE, FALSE, TRUE, SCIP_PROPTIMING_BEFORELP, SCIP_PRESOLTIMING_FAST)
   {
   }
 
   /** destructor */
   virtual ~ConshdlrSubtour()
   {
   }
 
   /** frees specific constraint data */
   virtual SCIP_DECL_CONSDELETE(scip_delete);
 
   /** transforms constraint data into data belonging to the transformed problem */
   virtual SCIP_DECL_CONSTRANS(scip_trans);
 
   /** separation method of constraint handler for LP solution
    *
    *  Separates all constraints of the constraint handler. The method is called in the LP solution loop,
    *  which means that a valid LP solution exists.
    *
    *  The first nusefulconss constraints are the ones, that are identified to likely be violated. The separation
    *  method should process only the useful constraints in most runs, and only occasionally the remaining
    *  nconss - nusefulconss constraints.
    *
    *  possible return values for *result (if more than one applies, the first in the list should be used):
    *  - SCIP_CUTOFF     : the node is infeasible in the variable's bounds and can be cut off
    *  - SCIP_CONSADDED  : an additional constraint was generated
    *  - SCIP_REDUCEDDOM : a variable's domain was reduced
    *  - SCIP_SEPARATED  : a cutting plane was generated
    *  - SCIP_DIDNOTFIND : the separator searched, but did not find domain reductions, cutting planes, or cut constraints
    *  - SCIP_DIDNOTRUN  : the separator was skipped
    *  - SCIP_DELAYED    : the separator was skipped, but should be called again
    */
   virtual SCIP_DECL_CONSSEPALP(scip_sepalp);
 
   /** separation method of constraint handler for arbitrary primal solution
    *
    *  Separates all constraints of the constraint handler. The method is called outside the LP solution loop (e.g., by
    *  a relaxator or a primal heuristic), which means that there is no valid LP solution.
    *  Instead, the method should produce cuts that separate the given solution.
    *
    *  The first nusefulconss constraints are the ones, that are identified to likely be violated. The separation
    *  method should process only the useful constraints in most runs, and only occasionally the remaining
    *  nconss - nusefulconss constraints.
    *
    *  possible return values for *result (if more than one applies, the first in the list should be used):
    *  - SCIP_CUTOFF     : the node is infeasible in the variable's bounds and can be cut off
    *  - SCIP_CONSADDED  : an additional constraint was generated
    *  - SCIP_REDUCEDDOM : a variable's domain was reduced
    *  - SCIP_SEPARATED  : a cutting plane was generated
    *  - SCIP_DIDNOTFIND : the separator searched, but did not find domain reductions, cutting planes, or cut constraints
    *  - SCIP_DIDNOTRUN  : the separator was skipped
    *  - SCIP_DELAYED    : the separator was skipped, but should be called again
    */
   virtual SCIP_DECL_CONSSEPASOL(scip_sepasol);
 
   /** constraint enforcing method of constraint handler for LP solutions
    *
    *  The method is called at the end of the node processing loop for a node where the LP was solved.
    *  The LP solution has to be checked for feasibility. If possible, an infeasibility should be resolved by
    *  branching, reducing a variable's domain to exclude the solution or separating the solution with a valid
    *  cutting plane.
    *
    *  The enforcing methods of the active constraint handlers are called in decreasing order of their enforcing
    *  priorities until the first constraint handler returned with the value SCIP_CUTOFF, SCIP_SEPARATED,
    *  SCIP_REDUCEDDOM, SCIP_CONSADDED, or SCIP_BRANCHED.
    *  The integrality constraint handler has an enforcing priority of zero. A constraint handler which can
    *  (or wants) to enforce its constraints only for integral solutions should have a negative enforcing priority
    *  (e.g. the alldiff-constraint can only operate on integral solutions).
    *  A constraint handler which wants to incorporate its own branching strategy even on non-integral
    *  solutions must have an enforcing priority greater than zero (e.g. the SOS-constraint incorporates
    *  SOS-branching on non-integral solutions).
    *
    *  The first nusefulconss constraints are the ones, that are identified to likely be violated. The enforcing
    *  method should process the useful constraints first. The other nconss - nusefulconss constraints should only
    *  be enforced, if no violation was found in the useful constraints.
    *
    *  possible return values for *result (if more than one applies, the first in the list should be used):
    *  - SCIP_CUTOFF     : the node is infeasible in the variable's bounds and can be cut off
    *  - SCIP_CONSADDED  : an additional constraint was generated
    *  - SCIP_REDUCEDDOM : a variable's domain was reduced
    *  - SCIP_SEPARATED  : a cutting plane was generated
    *  - SCIP_BRANCHED   : no changes were made to the problem, but a branching was applied to resolve an infeasibility
    *  - SCIP_INFEASIBLE : at least one constraint is infeasible, but it was not resolved
    *  - SCIP_FEASIBLE   : all constraints of the handler are feasible
    */
   virtual SCIP_DECL_CONSENFOLP(scip_enfolp);
 
   /** constraint enforcing method of constraint handler for pseudo solutions
    *
    *  The method is called at the end of the node processing loop for a node where the LP was not solved.
    *  The pseudo solution has to be checked for feasibility. If possible, an infeasibility should be resolved by
    *  branching, reducing a variable's domain to exclude the solution or adding an additional constraint.
    *  Separation is not possible, since the LP is not processed at the current node. All LP informations like
    *  LP solution, slack values, or reduced costs are invalid and must not be accessed.
    *
    *  Like in the enforcing method for LP solutions, the enforcing methods of the active constraint handlers are
    *  called in decreasing order of their enforcing priorities until the first constraint handler returned with
    *  the value SCIP_CUTOFF, SCIP_REDUCEDDOM, SCIP_CONSADDED, SCIP_BRANCHED, or SCIP_SOLVELP.
    *
    *  The first nusefulconss constraints are the ones, that are identified to likely be violated. The enforcing
    *  method should process the useful constraints first. The other nconss - nusefulconss constraints should only
    *  be enforced, if no violation was found in the useful constraints.
    *
    *  If the pseudo solution's objective value is lower than the lower bound of the node, it cannot be feasible
    *  and the enforcing method may skip it's check and set *result to SCIP_DIDNOTRUN. However, it can also process
    *  its constraints and return any other possible result code.
    *
    *  possible return values for *result (if more than one applies, the first in the list should be used):
    *  - SCIP_CUTOFF     : the node is infeasible in the variable's bounds and can be cut off
    *  - SCIP_CONSADDED  : an additional constraint was generated
    *  - SCIP_REDUCEDDOM : a variable's domain was reduced
    *  - SCIP_BRANCHED   : no changes were made to the problem, but a branching was applied to resolve an infeasibility
    *  - SCIP_SOLVELP    : at least one constraint is infeasible, and this can only be resolved by solving the SCIP_LP
    *  - SCIP_INFEASIBLE : at least one constraint is infeasible, but it was not resolved
    *  - SCIP_FEASIBLE   : all constraints of the handler are feasible
    *  - SCIP_DIDNOTRUN  : the enforcement was skipped (only possible, if objinfeasible is true)
    */
   virtual SCIP_DECL_CONSENFOPS(scip_enfops);
 
   /** feasibility check method of constraint handler for primal solutions
    *
    *  The given solution has to be checked for feasibility.
    *
    *  The check methods of the active constraint handlers are called in decreasing order of their check
    *  priorities until the first constraint handler returned with the result SCIP_INFEASIBLE.
    *  The integrality constraint handler has a check priority of zero. A constraint handler which can
    *  (or wants) to check its constraints only for integral solutions should have a negative check priority
    *  (e.g. the alldiff-constraint can only operate on integral solutions).
    *  A constraint handler which wants to check feasibility even on non-integral solutions must have a
    *  check priority greater than zero (e.g. if the check is much faster than testing all variables for
    *  integrality).
    *
    *  In some cases, integrality conditions or rows of the current LP don't have to be checked, because their
    *  feasibility is already checked or implicitly given. In these cases, 'checkintegrality' or
    *  'checklprows' is FALSE.
    *
    *  possible return values for *result:
    *  - SCIP_INFEASIBLE : at least one constraint of the handler is infeasible
    *  - SCIP_FEASIBLE   : all constraints of the handler are feasible
    */
   virtual SCIP_DECL_CONSCHECK(scip_check);
 
   /** domain propagation method of constraint handler
    *
    *  The first nusefulconss constraints are the ones, that are identified to likely be violated. The propagation
    *  method should process only the useful constraints in most runs, and only occasionally the remaining
    *  nconss - nusefulconss constraints.
    *
    *  possible return values for *result:
    *  - SCIP_CUTOFF     : the node is infeasible in the variable's bounds and can be cut off
    *  - SCIP_REDUCEDDOM : at least one domain reduction was found
    *  - SCIP_DIDNOTFIND : the propagator searched, but did not find any domain reductions
    *  - SCIP_DIDNOTRUN  : the propagator was skipped
    *  - SCIP_DELAYED    : the propagator was skipped, but should be called again
    */
   virtual SCIP_DECL_CONSPROP(scip_prop);
 
   /** variable rounding lock method of constraint handler
    *
    *  This method is called, after a constraint is added or removed from the transformed problem.
    *  It should update the rounding locks of all associated variables with calls to SCIPaddVarLocksType(),
    *  depending on the way, the variable is involved in the constraint:
    *  - If the constraint may get violated by decreasing the value of a variable, it should call
    *    SCIPaddVarLocksType(scip, var, SCIP_LOCKTYPE_MODEL, nlockspos, nlocksneg), saying that rounding down is
    *    potentially rendering the (positive) constraint infeasible and rounding up is potentially rendering the
    *    negation of the constraint infeasible.
    *  - If the constraint may get violated by increasing the value of a variable, it should call
    *    SCIPaddVarLocksType(scip, var, SCIP_LOCKTYPE_MODEL, nlocksneg, nlockspos), saying that rounding up is
    *    potentially rendering the constraint's negation infeasible and rounding up is potentially rendering the
    *    constraint itself infeasible.
    *  - If the constraint may get violated by changing the variable in any direction, it should call
    *    SCIPaddVarLocksType(scip, var, SCIP_LOCKTYPE_MODEL, nlockspos + nlocksneg, nlockspos + nlocksneg).
    *
    *  Consider the linear constraint "3x -5y +2z <= 7" as an example. The variable rounding lock method of the
    *  linear constraint handler should call SCIPaddVarLocksType(scip, x, SCIP_LOCKTYPE_MODEL, nlocksneg, nlockspos),
    *  SCIPaddVarLocksType(scip, y, SCIP_LOCKTYPE_MODEL, nlockspos, nlocksneg) and
    *  SCIPaddVarLocksType(scip, z, SCIP_LOCKTYPE_MODEL, nlocksneg, nlockspos) to tell SCIP,
    *  that rounding up of x and z and rounding down of y can destroy the feasibility of the constraint, while rounding
    *  down of x and z and rounding up of y can destroy the feasibility of the constraint's negation "3x -5y +2z > 7".
    *  A linear constraint "2 <= 3x -5y +2z <= 7" should call
    *  SCIPaddVarLocksType(scip, ..., SCIP_LOCKTYPE_MODEL, nlockspos + nlocksneg, nlockspos + nlocksneg) on all variables,
    *  since rounding in both directions of each variable can destroy both the feasibility of the constraint and it's negation
    *  "3x -5y +2z < 2  or  3x -5y +2z > 7".
    *
    *  If the constraint itself contains other constraints as sub constraints (e.g. the "or" constraint concatenation
    *  "c(x) or d(x)"), the rounding lock methods of these constraints should be called in a proper way.
    *  - If the constraint may get violated by the violation of the sub constraint c, it should call
    *    SCIPaddConsLocks(scip, c, nlockspos, nlocksneg), saying that infeasibility of c may lead to infeasibility of
    *    the (positive) constraint, and infeasibility of c's negation (i.e. feasibility of c) may lead to infeasibility
    *    of the constraint's negation (i.e. feasibility of the constraint).
    *  - If the constraint may get violated by the feasibility of the sub constraint c, it should call
    *    SCIPaddConsLocks(scip, c, nlocksneg, nlockspos), saying that infeasibility of c may lead to infeasibility of
    *    the constraint's negation (i.e. feasibility of the constraint), and infeasibility of c's negation (i.e. feasibility
    *    of c) may lead to infeasibility of the (positive) constraint.
    *  - If the constraint may get violated by any change in the feasibility of the sub constraint c, it should call
    *    SCIPaddConsLocks(scip, c, nlockspos + nlocksneg, nlockspos + nlocksneg).
    *
    *  Consider the or concatenation "c(x) or d(x)". The variable rounding lock method of the or constraint handler
    *  should call SCIPaddConsLocks(scip, c, nlockspos, nlocksneg) and SCIPaddConsLocks(scip, d, nlockspos, nlocksneg)
    *  to tell SCIP, that infeasibility of c and d can lead to infeasibility of "c(x) or d(x)".
    *
    *  As a second example, consider the equivalence constraint "y <-> c(x)" with variable y and constraint c. The
    *  constraint demands, that y == 1 if and only if c(x) is satisfied. The variable lock method of the corresponding
    *  constraint handler should call SCIPaddVarLocksType(scip, y, SCIP_LOCKTYPE_MODEL, nlockspos + nlocksneg, nlockspos + nlocksneg) and
    *  SCIPaddConsLocks(scip, c, nlockspos + nlocksneg, nlockspos + nlocksneg), because any modification to the
    *  value of y or to the feasibility of c can alter the feasibility of the equivalence constraint.
    */
   virtual SCIP_DECL_CONSLOCK(scip_lock);
 
   /** variable deletion method of constraint handler
    *
    *  This method should iterate over all constraints of the constraint handler and delete all variables
    *  that were marked for deletion by SCIPdelVar().
    *
    *  input:
    *  - scip            : SCIP main data structure
    *  - conshdlr        : the constraint handler itself
    *  - conss           : array of constraints in transformed problem
    *  - nconss          : number of constraints in transformed problem
    */
   virtual SCIP_DECL_CONSDELVARS(scip_delvars);
 
   /** constraint display method of constraint handler
    *
    *  The constraint handler should store a representation of the constraint into the given text file.
    */
   virtual SCIP_DECL_CONSPRINT(scip_print);
 
   /** returns whether the objective plugin is copyable */
   virtual SCIP_DECL_CONSHDLRISCLONEABLE(iscloneable)
   {
      return TRUE;
   }
 
   /** clone method which will be used to copy a objective plugin */
   virtual SCIP_DECL_CONSHDLRCLONE(scip::ObjProbCloneable* clone); /*lint !e665*/
 
   /** constraint copying method of constraint handler
    *
    *  The constraint handler can provide a copy method, which copies a constraint from one SCIP data structure into a other
    *  SCIP data structure.
    */
   virtual SCIP_DECL_CONSCOPY(scip_copy);
}; /*lint !e1712*/
 
/** creates and captures a TSP subtour constraint */
SCIP_RETCODE SCIPcreateConsSubtour(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_CONS**           cons,               /**< pointer to hold the created constraint */
   const char*           name,               /**< name of constraint */
   GRAPH*                graph,              /**< the underlying graph */
   SCIP_Bool             initial,            /**< should the LP relaxation of constraint be in the initial LP? */
   SCIP_Bool             separate,           /**< should the constraint be separated during LP processing? */
   SCIP_Bool             enforce,            /**< should the constraint be enforced during node processing? */
   SCIP_Bool             check,              /**< should the constraint be checked for feasibility? */
   SCIP_Bool             propagate,          /**< should the constraint be propagated during node processing? */
   SCIP_Bool             local,              /**< is constraint only valid locally? */
   SCIP_Bool             modifiable,         /**< is constraint modifiable (subject to column generation)? */
   SCIP_Bool             dynamic,            /**< is constraint dynamic? */
   SCIP_Bool             removable           /**< should the constraint be removed from the LP due to aging or cleanup? */
   );
}
 
#endif