clock.c File Reference

Detailed Description

methods for clocks and timing issues

Author

Tobias Achterberg

Definition in file clock.c.

#include <assert.h>
#include <sys/times.h>
#include <sys/time.h>
#include <unistd.h>
#include <time.h>
#include "scip/def.h"
#include "scip/pub_message.h"
#include "blockmemshell/memory.h"
#include "scip/set.h"
#include "scip/clock.h"
#include "scip/struct_clock.h"

Go to the source code of this file.

Functions
static SCIP_Real	cputime2sec (clock_t cputime)
static SCIP_Real	walltime2sec (long sec, long usec)
static void	sec2cputime (SCIP_Real sec, clock_t *cputime)
static void	sec2walltime (SCIP_Real sec, long *wallsec, long *wallusec)
static void	clockSetType (SCIP_CLOCK *clck, SCIP_CLOCKTYPE newtype)
static void	clockUpdateDefaultType (SCIP_CLOCK *clck, SCIP_CLOCKTYPE defaultclocktype)
SCIP_RETCODE	SCIPclockCreate (SCIP_CLOCK **clck, SCIP_CLOCKTYPE clocktype)
void	SCIPclockFree (SCIP_CLOCK **clck)
void	SCIPclockInit (SCIP_CLOCK *clck, SCIP_CLOCKTYPE clocktype)
void	SCIPclockReset (SCIP_CLOCK *clck)
void	SCIPclockEnable (SCIP_CLOCK *clck)
void	SCIPclockDisable (SCIP_CLOCK *clck)
void	SCIPclockEnableOrDisable (SCIP_CLOCK *clck, SCIP_Bool enable)
void	SCIPclockSetType (SCIP_CLOCK *clck, SCIP_CLOCKTYPE clocktype)
void	SCIPclockStart (SCIP_CLOCK *clck, SCIP_SET *set)
void	SCIPclockStop (SCIP_CLOCK *clck, SCIP_SET *set)
SCIP_Bool	SCIPclockIsRunning (SCIP_CLOCK *clck)
SCIP_Real	SCIPclockGetTime (SCIP_CLOCK *clck)
SCIP_Real	SCIPclockGetLastTime (SCIP_CLOCK *clck)
void	SCIPclockSetTime (SCIP_CLOCK *clck, SCIP_Real sec)
SCIP_Real	SCIPclockGetTimeOfDay (void)

Function Documentation

cputime2sec()

static SCIP_Real cputime2sec ( clock_t  cputime )

static

converts CPU clock ticks into seconds

Parameters

cputime

clock ticks for CPU time

Definition at line 43 of file clock.c.

References SCIP_Real.

Referenced by SCIPclockGetTime(), and SCIPclockStart().

walltime2sec()

static SCIP_Real walltime2sec ( long  sec, long  usec  )

static

converts wall clock time into seconds

Parameters

sec	seconds counter
usec	microseconds counter

Definition at line 67 of file clock.c.

References SCIP_Real.

Referenced by SCIPclockGetTime(), and SCIPclockStart().

sec2cputime()

static void sec2cputime ( SCIP_Real  sec, clock_t *  cputime  )

static

converts seconds into CPU clock ticks

Parameters

sec	seconds
cputime	pointer to store clock ticks for CPU time

Definition at line 77 of file clock.c.

References NULL.

Referenced by SCIPclockSetTime().

sec2walltime()

static void sec2walltime ( SCIP_Real  sec, long *  wallsec, long *  wallusec  )

static

converts wall clock time into seconds

Parameters

sec	seconds
wallsec	pointer to store seconds counter
wallusec	pointer to store microseconds counter

Definition at line 100 of file clock.c.

References NULL.

Referenced by SCIPclockSetTime().

clockSetType()

static void clockSetType ( SCIP_CLOCK *  clck, SCIP_CLOCKTYPE  newtype  )

static

sets the clock's type and converts the clock timer accordingly

Parameters

clck	clock timer
newtype	new clock type

Definition at line 116 of file clock.c.

References SCIP_Clock::clocktype, SCIP_Clock::nruns, NULL, SCIP_CLOCKTYPE_DEFAULT, SCIP_Real, SCIPclockGetTime(), SCIPclockReset(), SCIPclockSetTime(), and SCIPdebugMessage.

Referenced by clockUpdateDefaultType(), and SCIPclockSetTime().

clockUpdateDefaultType()

static void clockUpdateDefaultType ( SCIP_CLOCK *  clck, SCIP_CLOCKTYPE  defaultclocktype  )

static

if the clock uses the default clock type and the default changed, converts the clock timer to the new type

Parameters

clck	clock timer
defaultclocktype	default type of clock to use

Definition at line 147 of file clock.c.

References clockSetType(), SCIP_Clock::clocktype, NULL, SCIP_CLOCKTYPE_DEFAULT, and SCIP_Clock::usedefault.

Referenced by SCIPclockStart().

SCIPclockCreate()

SCIP_RETCODE SCIPclockCreate	(	SCIP_CLOCK **	clck,
		SCIP_CLOCKTYPE	clocktype
	)

creates a clock and initializes it

Parameters

clck	pointer to clock timer
clocktype	type of clock

Definition at line 160 of file clock.c.

References BMSallocMemory, NULL, SCIP_ALLOC, SCIP_OKAY, and SCIPclockInit().

Referenced by doBranchruleCreate(), doComprCreate(), doConflicthdlrCreate(), doConshdlrCreate(), doEventhdlrCreate(), doHeurCreate(), doNodeselCreate(), doPresolCreate(), doPricerCreate(), doPropCreate(), doReaderCreate(), doRelaxCreate(), doScipCreate(), doSepaCreate(), SCIPbendersCreate(), SCIPbenderscutCreate(), SCIPconflictCreate(), SCIPcreateClock(), SCIPcreateCPUClock(), SCIPcreateWallClock(), SCIPcutpoolCreate(), SCIPpricestoreCreate(), SCIPreaderRead(), SCIPreoptCreate(), and SCIPstatCreate().

SCIPclockFree()

void SCIPclockFree

(

SCIP_CLOCK **

clck

)

frees a clock

Parameters

clck	pointer to clock timer

Definition at line 175 of file clock.c.

References BMSfreeMemory, and NULL.

Referenced by SCIPbenderscutFree(), SCIPbendersFree(), SCIPbranchruleFree(), SCIPcomprFree(), SCIPconflictFree(), SCIPconflicthdlrFree(), SCIPconshdlrFree(), SCIPcutpoolFree(), SCIPeventhdlrFree(), SCIPfree(), SCIPfreeClock(), SCIPheurFree(), SCIPnodeselFree(), SCIPpresolFree(), SCIPpricerFree(), SCIPpricestoreFree(), SCIPpropFree(), SCIPreaderFree(), SCIPreaderRead(), SCIPrelaxFree(), SCIPreoptFree(), SCIPsepaFree(), and SCIPstatFree().

SCIPclockInit()

void SCIPclockInit	(	SCIP_CLOCK *	clck,
		SCIP_CLOCKTYPE	clocktype
	)

initializes and resets a clock

Parameters

clck	clock timer
clocktype	type of clock

Definition at line 185 of file clock.c.

References NULL, SCIPclockSetType(), SCIPdebugMessage, and TRUE.

Referenced by SCIPclockCreate().

SCIPclockReset()

void SCIPclockReset

(

SCIP_CLOCK *

clck

)

completely stop the clock and reset the clock's counter to zero

Parameters

clck	clock timer

Definition at line 199 of file clock.c.

References SCIP_Clock::clocktype, NULL, SCIP_CLOCKTYPE_CPU, SCIP_CLOCKTYPE_DEFAULT, SCIP_CLOCKTYPE_WALL, SCIPABORT, SCIPdebugMessage, and SCIPerrorMessage.

Referenced by clockSetType(), SCIPbenderscutInit(), SCIPbendersInit(), SCIPbranchruleInit(), SCIPclockDisable(), SCIPclockSetType(), SCIPcomprInit(), SCIPconflicthdlrInit(), SCIPconshdlrInit(), SCIPeventhdlrInit(), SCIPheurInit(), SCIPnodeselInit(), SCIPpresolInit(), SCIPpricerInit(), SCIPpropInit(), SCIPreaderResetReadingTime(), SCIPrelaxInit(), SCIPresetClock(), SCIPsepaInit(), and SCIPstatReset().

SCIPclockEnable()

void SCIPclockEnable

(

SCIP_CLOCK *

clck

)

enables the clock

Parameters

clck	clock timer

Definition at line 225 of file clock.c.

References SCIP_Clock::clocktype, NULL, SCIPdebugMessage, and TRUE.

Referenced by SCIPclockEnableOrDisable().

SCIPclockDisable()

void SCIPclockDisable

(

SCIP_CLOCK *

clck

)

disables and resets the clock

Parameters

clck	clock timer

Definition at line 237 of file clock.c.

References SCIP_Clock::clocktype, FALSE, NULL, SCIPclockReset(), and SCIPdebugMessage.

Referenced by SCIPclockEnableOrDisable().

SCIPclockEnableOrDisable()

void SCIPclockEnableOrDisable	(	SCIP_CLOCK *	clck,
		SCIP_Bool	enable
	)

enables or disables clck, depending on the value of the flag

Parameters

clck	the clock to be disabled/enabled
enable	should the clock be enabled?

Definition at line 250 of file clock.c.

References NULL, SCIPclockDisable(), and SCIPclockEnable().

Referenced by SCIPbendersEnableOrDisableClocks(), SCIPbranchruleEnableOrDisableClocks(), SCIPconflictEnableOrDisableClocks(), SCIPconflicthdlrEnableOrDisableClocks(), SCIPconshdlrEnableOrDisableClocks(), SCIPeventhdlrEnableOrDisableClocks(), SCIPheurEnableOrDisableClocks(), SCIPnodeselEnableOrDisableClocks(), SCIPpresolEnableOrDisableClocks(), SCIPpricerEnableOrDisableClocks(), SCIPpropEnableOrDisableClocks(), SCIPreaderEnableOrDisableClocks(), SCIPrelaxEnableOrDisableClocks(), SCIPsepaEnableOrDisableClocks(), and SCIPstatEnableOrDisableStatClocks().

SCIPclockSetType()

void SCIPclockSetType	(	SCIP_CLOCK *	clck,
		SCIP_CLOCKTYPE	clocktype
	)

sets the type of the clock, overriding the default clock type, and resets the clock

Parameters

clck	clock timer
clocktype	type of clock

Definition at line 264 of file clock.c.

References SCIP_Clock::clocktype, NULL, SCIP_CLOCKTYPE_DEFAULT, SCIPclockReset(), and SCIPdebugMessage.

Referenced by SCIPclockInit().

SCIPclockStart()

void SCIPclockStart	(	SCIP_CLOCK *	clck,
		SCIP_SET *	set
	)

starts measurement of time in the given clock

Parameters

clck	clock timer
set	global SCIP settings

Definition at line 280 of file clock.c.

References SCIP_Clock::clocktype, clockUpdateDefaultType(), cputime2sec(), SCIP_Clock::enabled, SCIP_Clock::nruns, NULL, SCIP_CLOCKTYPE_CPU, SCIP_CLOCKTYPE_DEFAULT, SCIP_CLOCKTYPE_WALL, SCIPABORT, SCIPdebugMessage, SCIPerrorMessage, and walltime2sec().

Referenced by addCurrentSolution(), addNode(), conflictAddConflictCons(), conflictAnalyzeBoundexceedingLP(), conflictAnalyzeInfeasibleLP(), conflictAnalyzeLP(), doCopy(), doScipCreate(), lpBarrier(), lpDualSimplex(), lpLexDualSimplex(), lpPrimalSimplex(), nlpSolve(), nodeRepropagate(), performStrongbranchWithPropagation(), presolve(), runBoundHeuristic(), SCIPbenderscutExec(), SCIPbenderscutExit(), SCIPbenderscutExitsol(), SCIPbenderscutInit(), SCIPbenderscutInitsol(), SCIPbendersExec(), SCIPbendersExit(), SCIPbendersExitpre(), SCIPbendersExitsol(), SCIPbendersInit(), SCIPbendersInitpre(), SCIPbendersInitsol(), SCIPbranchruleExecExternSol(), SCIPbranchruleExecLPSol(), SCIPbranchruleExecPseudoSol(), SCIPbranchruleExit(), SCIPbranchruleExitsol(), SCIPbranchruleInit(), SCIPbranchruleInitsol(), SCIPcolGetStrongbranch(), SCIPcolGetStrongbranches(), SCIPcomprExec(), SCIPcomprExit(), SCIPcomprInit(), SCIPconflictAnalyze(), SCIPconflictAnalyzePseudo(), SCIPconflictAnalyzeStrongbranch(), SCIPconflicthdlrExec(), SCIPconflicthdlrExit(), SCIPconflicthdlrExitsol(), SCIPconflicthdlrInit(), SCIPconflicthdlrInitsol(), SCIPconshdlrCheck(), SCIPconshdlrEnforceLPSol(), SCIPconshdlrEnforcePseudoSol(), SCIPconshdlrEnforceRelaxSol(), SCIPconshdlrExit(), SCIPconshdlrExitpre(), SCIPconshdlrExitsol(), SCIPconshdlrInit(), SCIPconshdlrInitLP(), SCIPconshdlrInitpre(), SCIPconshdlrInitsol(), SCIPconshdlrPresolve(), SCIPconshdlrPropagate(), SCIPconshdlrSeparateLP(), SCIPconshdlrSeparateSol(), SCIPconsResolvePropagation(), SCIPcutpoolSeparate(), SCIPeventhdlrExec(), SCIPeventhdlrExit(), SCIPeventhdlrExitsol(), SCIPeventhdlrInit(), SCIPeventhdlrInitsol(), SCIPheurExec(), SCIPheurExit(), SCIPheurExitsol(), SCIPheurInit(), SCIPheurInitsol(), SCIPnodeselExit(), SCIPnodeselExitsol(), SCIPnodeselInit(), SCIPnodeselInitsol(), SCIPnodeselSelect(), SCIPpresolExec(), SCIPpresolExit(), SCIPpresolExitpre(), SCIPpresolInit(), SCIPpresolInitpre(), SCIPpresolve(), SCIPpricerExit(), SCIPpricerExitsol(), SCIPpricerFarkas(), SCIPpricerInit(), SCIPpricerInitsol(), SCIPpricerRedcost(), SCIPpricestoreAddProbVars(), SCIPpropExec(), SCIPpropExit(), SCIPpropExitpre(), SCIPpropExitsol(), SCIPpropInit(), SCIPpropInitpre(), SCIPpropInitsol(), SCIPpropPresol(), SCIPpropResolvePropagation(), SCIPreaderRead(), SCIPrelaxExec(), SCIPrelaxExit(), SCIPrelaxExitsol(), SCIPrelaxInit(), SCIPrelaxInitsol(), SCIPsepaExecLP(), SCIPsepaExecSol(), SCIPsepaExit(), SCIPsepaExitsol(), SCIPsepaInit(), SCIPsepaInitsol(), SCIPsolve(), SCIPsolveCIP(), SCIPsolveConcurrent(), SCIPstartClock(), SCIPstartSolvingTime(), and SCIPtryStrongbranchLPSol().

SCIPclockStop()

void SCIPclockStop	(	SCIP_CLOCK *	clck,
		SCIP_SET *	set
	)

stops measurement of time in the given clock

Parameters

clck	clock timer
set	global SCIP settings

Definition at line 350 of file clock.c.

References SCIP_Clock::clocktype, SCIP_Clock::enabled, SCIP_Clock::nruns, NULL, SCIP_CLOCKTYPE_CPU, SCIP_CLOCKTYPE_DEFAULT, SCIP_CLOCKTYPE_WALL, SCIPABORT, SCIPdebugMessage, and SCIPerrorMessage.

Referenced by addCurrentSolution(), addNode(), conflictAddConflictCons(), conflictAnalyzeBoundexceedingLP(), conflictAnalyzeInfeasibleLP(), conflictAnalyzeLP(), doCopy(), lpBarrier(), lpDualSimplex(), lpLexDualSimplex(), lpPrimalSimplex(), nlpSolve(), nodeRepropagate(), performStrongbranchWithPropagation(), presolve(), runBoundHeuristic(), SCIPbenderscutExec(), SCIPbenderscutExit(), SCIPbenderscutExitsol(), SCIPbenderscutInit(), SCIPbenderscutInitsol(), SCIPbendersExec(), SCIPbendersExit(), SCIPbendersExitpre(), SCIPbendersExitsol(), SCIPbendersInit(), SCIPbendersInitpre(), SCIPbendersInitsol(), SCIPbranchruleExecExternSol(), SCIPbranchruleExecLPSol(), SCIPbranchruleExecPseudoSol(), SCIPbranchruleExit(), SCIPbranchruleExitsol(), SCIPbranchruleInit(), SCIPbranchruleInitsol(), SCIPcolGetStrongbranch(), SCIPcolGetStrongbranches(), SCIPcomprExec(), SCIPcomprExit(), SCIPcomprInit(), SCIPconflictAnalyze(), SCIPconflictAnalyzePseudo(), SCIPconflictAnalyzeStrongbranch(), SCIPconflicthdlrExec(), SCIPconflicthdlrExit(), SCIPconflicthdlrExitsol(), SCIPconflicthdlrInit(), SCIPconflicthdlrInitsol(), SCIPconshdlrCheck(), SCIPconshdlrEnforceLPSol(), SCIPconshdlrEnforcePseudoSol(), SCIPconshdlrEnforceRelaxSol(), SCIPconshdlrExit(), SCIPconshdlrExitpre(), SCIPconshdlrExitsol(), SCIPconshdlrInit(), SCIPconshdlrInitLP(), SCIPconshdlrInitpre(), SCIPconshdlrInitsol(), SCIPconshdlrPresolve(), SCIPconshdlrPropagate(), SCIPconshdlrSeparateLP(), SCIPconshdlrSeparateSol(), SCIPconsResolvePropagation(), SCIPcutpoolSeparate(), SCIPeventhdlrExec(), SCIPeventhdlrExit(), SCIPeventhdlrExitsol(), SCIPeventhdlrInit(), SCIPeventhdlrInitsol(), SCIPheurExec(), SCIPheurExit(), SCIPheurExitsol(), SCIPheurInit(), SCIPheurInitsol(), SCIPnodeselExit(), SCIPnodeselExitsol(), SCIPnodeselInit(), SCIPnodeselInitsol(), SCIPnodeselSelect(), SCIPpresolExec(), SCIPpresolExit(), SCIPpresolExitpre(), SCIPpresolInit(), SCIPpresolInitpre(), SCIPpresolve(), SCIPpricerExit(), SCIPpricerExitsol(), SCIPpricerFarkas(), SCIPpricerInit(), SCIPpricerInitsol(), SCIPpricerRedcost(), SCIPpricestoreAddProbVars(), SCIPpropExec(), SCIPpropExit(), SCIPpropExitpre(), SCIPpropExitsol(), SCIPpropInit(), SCIPpropInitpre(), SCIPpropInitsol(), SCIPpropPresol(), SCIPpropResolvePropagation(), SCIPreaderRead(), SCIPrelaxExec(), SCIPrelaxExit(), SCIPrelaxExitsol(), SCIPrelaxInit(), SCIPrelaxInitsol(), SCIPsepaExecLP(), SCIPsepaExecSol(), SCIPsepaExit(), SCIPsepaExitsol(), SCIPsepaInit(), SCIPsepaInitsol(), SCIPsolve(), SCIPsolveCIP(), SCIPsolveConcurrent(), SCIPstopClock(), SCIPstopSolvingTime(), and SCIPtryStrongbranchLPSol().

SCIPclockIsRunning()

SCIP_Bool SCIPclockIsRunning

(

SCIP_CLOCK *

clck

)

returns whether the clock is currently running

Parameters

clck	clock timer

Definition at line 417 of file clock.c.

References SCIP_Clock::nruns, and NULL.

Referenced by nodeRepropagate(), and SCIPreaderRead().

SCIPclockGetTime()

SCIP_Real SCIPclockGetTime

(

SCIP_CLOCK *

clck

)

gets the used time of this clock in seconds

Parameters

clck	clock timer

Definition at line 428 of file clock.c.

References SCIP_Clock::clocktype, cputime2sec(), NULL, SCIP_CLOCKTYPE_CPU, SCIP_CLOCKTYPE_DEFAULT, SCIP_CLOCKTYPE_WALL, SCIP_Real, SCIPABORT, SCIPdebugMessage, SCIPerrorMessage, and walltime2sec().

Referenced by applyVbounds(), clockSetType(), displayRelevantStats(), doCopy(), lpAlgorithm(), lpBarrier(), lpDualSimplex(), lpLexDualSimplex(), lpPrimalSimplex(), printTime(), SCIPbenderscutGetSetupTime(), SCIPbenderscutGetTime(), SCIPbendersGetSetupTime(), SCIPbendersGetTime(), SCIPbranchruleGetSetupTime(), SCIPbranchruleGetTime(), SCIPcomprGetSetupTime(), SCIPcomprGetTime(), SCIPconcsolverGetSyncTime(), SCIPconflictGetBoundexceedingLPTime(), SCIPconflictGetGlobalApplTime(), SCIPconflictGetInfeasibleLPTime(), SCIPconflictGetPropTime(), SCIPconflictGetPseudoTime(), SCIPconflictGetStrongbranchTime(), SCIPconflicthdlrGetSetupTime(), SCIPconflicthdlrGetTime(), SCIPconshdlrGetCheckTime(), SCIPconshdlrGetEnfoLPTime(), SCIPconshdlrGetEnfoPSTime(), SCIPconshdlrGetEnfoRelaxTime(), SCIPconshdlrGetPresolTime(), SCIPconshdlrGetPropTime(), SCIPconshdlrGetRespropTime(), SCIPconshdlrGetSepaTime(), SCIPconshdlrGetSetupTime(), SCIPconshdlrGetStrongBranchPropTime(), SCIPcutpoolGetTime(), SCIPeventhdlrGetSetupTime(), SCIPeventhdlrGetTime(), SCIPgetClockTime(), SCIPgetPresolvingTime(), SCIPgetSolvingTime(), SCIPgetTotalTime(), SCIPheurGetSetupTime(), SCIPheurGetTime(), SCIPnodeselGetSetupTime(), SCIPnodeselGetTime(), SCIPpresolGetSetupTime(), SCIPpresolGetTime(), SCIPpresolve(), SCIPpricerGetSetupTime(), SCIPpricerGetTime(), SCIPpricestoreGetProbPricingTime(), SCIPprintHeuristicStatistics(), SCIPprintLPStatistics(), SCIPprintNLPStatistics(), SCIPprintReoptStatistics(), SCIPprintTimingStatistics(), SCIPprintTreeStatistics(), SCIPpropGetPresolTime(), SCIPpropGetRespropTime(), SCIPpropGetSetupTime(), SCIPpropGetStrongBranchPropTime(), SCIPpropGetTime(), SCIPreaderGetReadingTime(), SCIPreaderRead(), SCIPrelaxGetSetupTime(), SCIPrelaxGetTime(), SCIPreoptGetSavingtime(), SCIPsepaGetSetupTime(), SCIPsepaGetTime(), SCIPsolveIsStopped(), SCIPstatUpdatePrimalDualIntegral(), solStamp(), and solveNodeInitialLP().

SCIPclockGetLastTime()

SCIP_Real SCIPclockGetLastTime

(

SCIP_CLOCK *

clck

)

gets the last validated time of this clock in seconds

Parameters

clck	clock timer

Definition at line 508 of file clock.c.

References SCIP_Clock::lasttime, and NULL.

Referenced by SCIPsolveIsStopped(), and solStamp().

SCIPclockSetTime()

void SCIPclockSetTime	(	SCIP_CLOCK *	clck,
		SCIP_Real	sec
	)

sets the used time of this clock in seconds

Parameters

clck	clock timer
sec	time in seconds to set the clock's timer to

Definition at line 518 of file clock.c.

References clockSetType(), SCIP_Clock::clocktype, NULL, SCIP_CLOCKTYPE_CPU, SCIP_CLOCKTYPE_DEFAULT, SCIP_CLOCKTYPE_WALL, SCIPABORT, SCIPdebugMessage, SCIPerrorMessage, sec2cputime(), and sec2walltime().

Referenced by clockSetType(), SCIPreaderRead(), SCIPreadProb(), and SCIPsetClockTime().

SCIPclockGetTimeOfDay()

SCIP_Real SCIPclockGetTimeOfDay

(

void

)

gets current time of day in seconds (standard time zone)

Definition at line 600 of file clock.c.

References NULL, and SCIP_Real.

Referenced by SCIPgetTimeOfDay().