Detailed Description

methods for Benders' decomposition plugins

Functions
	SCIP_DECL_SORTPTRCOMP (SCIPbendersComp)

	SCIP_DECL_SORTPTRCOMP (SCIPbendersCompName)

SCIP_BENDERSDATA *	SCIPbendersGetData (SCIP_BENDERS *benders)

void	SCIPbendersSetData (SCIP_BENDERS benders, SCIP_BENDERSDATA bendersdata)

const char *	SCIPbendersGetName (SCIP_BENDERS *benders)

const char *	SCIPbendersGetDesc (SCIP_BENDERS *benders)

int	SCIPbendersGetPriority (SCIP_BENDERS *benders)

int	SCIPbendersGetNSubproblems (SCIP_BENDERS *benders)

SCIP *	SCIPbendersSubproblem (SCIP_BENDERS *benders, int probnumber)

int	SCIPbendersGetNCalls (SCIP_BENDERS *benders)

int	SCIPbendersGetNCutsFound (SCIP_BENDERS *benders)

SCIP_Real	SCIPbendersGetSetupTime (SCIP_BENDERS *benders)

SCIP_Real	SCIPbendersGetTime (SCIP_BENDERS *benders)

SCIP_Bool	SCIPbendersIsInitialized (SCIP_BENDERS *benders)

SCIP_Bool	SCIPbendersIsActive (SCIP_BENDERS *benders)

SCIP_Bool	SCIPbendersOnlyCheckConvexRelax (SCIP_BENDERS *benders)

SCIP_Bool	SCIPbendersCutLP (SCIP_BENDERS *benders)

SCIP_Bool	SCIPbendersCutPseudo (SCIP_BENDERS *benders)

SCIP_Bool	SCIPbendersCutRelaxation (SCIP_BENDERS *benders)

SCIP_Bool	SCIPbendersShareAuxVars (SCIP_BENDERS *benders)

SCIP_VAR *	SCIPbendersGetAuxiliaryVar (SCIP_BENDERS *benders, int probnumber)

SCIP_VAR **	SCIPbendersGetAuxiliaryVars (SCIP_BENDERS *benders)

void	SCIPbendersSetSubproblemObjval (SCIP_BENDERS *benders, int probnumber, SCIP_Real objval)

SCIP_Real	SCIPbendersGetSubproblemObjval (SCIP_BENDERS *benders, int probnumber)

SCIP_BENDERSCUT *	SCIPfindBenderscut (SCIP_BENDERS benders, const char name)

SCIP_BENDERSCUT **	SCIPbendersGetBenderscuts (SCIP_BENDERS *benders)

int	SCIPbendersGetNBenderscuts (SCIP_BENDERS *benders)

SCIP_RETCODE	SCIPbendersSetBenderscutPriority (SCIP_BENDERS benders, SCIP_BENDERSCUT benderscut, int priority)

void	SCIPbendersSetSubproblemIsConvex (SCIP_BENDERS *benders, int probnumber, SCIP_Bool isconvex)

SCIP_Bool	SCIPbendersSubproblemIsConvex (SCIP_BENDERS *benders, int probnumber)

int	SCIPbendersGetNConvexSubproblems (SCIP_BENDERS *benders)

SCIP_RETCODE	SCIPbendersSolveSubproblemLP (SCIP scip, SCIP_BENDERS benders, int probnumber, SCIP_Bool *infeasible)

SCIP_RETCODE	SCIPbendersSolveSubproblemCIP (SCIP scip, SCIP_BENDERS benders, int probnumber, SCIP_Bool *infeasible, SCIP_BENDERSENFOTYPE type, SCIP_Bool solvecip)

int	SCIPbendersGetNTransferredCuts (SCIP_BENDERS *benders)

void	SCIPbendersUpdateSubproblemLowerbound (SCIP_BENDERS *benders, int probnumber, SCIP_Real lowerbound)

SCIP_Real	SCIPbendersGetSubproblemLowerbound (SCIP_BENDERS *benders, int probnumber)

void	SCIPbendersSetSubproblemIsIndependent (SCIP_BENDERS *benders, int probnumber, SCIP_Bool isindep)

SCIP_Bool	SCIPbendersSubproblemIsIndependent (SCIP_BENDERS *benders, int probnumber)

SCIP_Bool	SCIPbendersSubproblemIsEnabled (SCIP_BENDERS *benders, int probnumber)

SCIP_RETCODE	SCIPincludeBenders (SCIP scip, const char name, const char desc, int priority, SCIP_Bool cutlp, SCIP_Bool cutpseudo, SCIP_Bool cutrelax, SCIP_Bool shareauxvars, SCIP_DECL_BENDERSCOPY((benderscopy)), SCIP_DECL_BENDERSFREE((bendersfree)), SCIP_DECL_BENDERSINIT((bendersinit)), SCIP_DECL_BENDERSEXIT((bendersexit)), SCIP_DECL_BENDERSINITPRE((bendersinitpre)), SCIP_DECL_BENDERSEXITPRE((bendersexitpre)), SCIP_DECL_BENDERSINITSOL((bendersinitsol)), SCIP_DECL_BENDERSEXITSOL((bendersexitsol)), SCIP_DECL_BENDERSGETVAR((bendersgetvar)), SCIP_DECL_BENDERSCREATESUB((benderscreatesub)), SCIP_DECL_BENDERSPRESUBSOLVE((benderspresubsolve)), SCIP_DECL_BENDERSSOLVESUBCONVEX((benderssolvesubconvex)), SCIP_DECL_BENDERSSOLVESUB((benderssolvesub)), SCIP_DECL_BENDERSPOSTSOLVE((benderspostsolve)), SCIP_DECL_BENDERSFREESUB((bendersfreesub)), SCIP_BENDERSDATA *bendersdata)

SCIP_RETCODE	SCIPincludeBendersBasic (SCIP scip, SCIP_BENDERS bendersptr, const char name, const char desc, int priority, SCIP_Bool cutlp, SCIP_Bool cutpseudo, SCIP_Bool cutrelax, SCIP_Bool shareauxvars, SCIP_DECL_BENDERSGETVAR((bendersgetvar)), SCIP_DECL_BENDERSCREATESUB((benderscreatesub)), SCIP_BENDERSDATA bendersdata)

SCIP_RETCODE	SCIPsetBendersCopy (SCIP scip, SCIP_BENDERS benders, SCIP_DECL_BENDERSCOPY((*benderscopy)))

SCIP_RETCODE	SCIPsetBendersFree (SCIP scip, SCIP_BENDERS benders, SCIP_DECL_BENDERSFREE((*bendersfree)))

SCIP_RETCODE	SCIPsetBendersInit (SCIP scip, SCIP_BENDERS benders, SCIP_DECL_BENDERSINIT((*bendersinit)))

SCIP_RETCODE	SCIPsetBendersExit (SCIP scip, SCIP_BENDERS benders, SCIP_DECL_BENDERSEXIT((*bendersexit)))

SCIP_RETCODE	SCIPsetBendersInitpre (SCIP scip, SCIP_BENDERS benders, SCIP_DECL_BENDERSINITPRE((*bendersinitpre)))

SCIP_RETCODE	SCIPsetBendersExitpre (SCIP scip, SCIP_BENDERS benders, SCIP_DECL_BENDERSEXITPRE((*bendersexitpre)))

SCIP_RETCODE	SCIPsetBendersInitsol (SCIP scip, SCIP_BENDERS benders, SCIP_DECL_BENDERSINITSOL((*bendersinitsol)))

SCIP_RETCODE	SCIPsetBendersExitsol (SCIP scip, SCIP_BENDERS benders, SCIP_DECL_BENDERSEXITSOL((*bendersexitsol)))

SCIP_RETCODE	SCIPsetBendersPresubsolve (SCIP scip, SCIP_BENDERS benders, SCIP_DECL_BENDERSPRESUBSOLVE((*benderspresubsolve)))

SCIP_RETCODE	SCIPsetBendersSolveAndFreesub (SCIP scip, SCIP_BENDERS benders, SCIP_DECL_BENDERSSOLVESUBCONVEX((benderssolvesubconvex)), SCIP_DECL_BENDERSSOLVESUB((benderssolvesub)), SCIP_DECL_BENDERSFREESUB((*bendersfreesub)))

SCIP_RETCODE	SCIPsetBendersPostsolve (SCIP scip, SCIP_BENDERS benders, SCIP_DECL_BENDERSPOSTSOLVE((*benderspostsolve)))

SCIP_BENDERS *	SCIPfindBenders (SCIP scip, const char name)

SCIP_BENDERS **	SCIPgetBenders (SCIP *scip)

int	SCIPgetNBenders (SCIP *scip)

int	SCIPgetNActiveBenders (SCIP *scip)

SCIP_RETCODE	SCIPactivateBenders (SCIP scip, SCIP_BENDERS benders, int nsubproblems)

SCIP_RETCODE	SCIPdeactivateBenders (SCIP scip, SCIP_BENDERS benders)

void	SCIPsetBendersPriority (SCIP scip, SCIP_BENDERS benders, int priority)

SCIP_RETCODE	SCIPsolveBendersSubproblems (SCIP scip, SCIP_BENDERS benders, SCIP_SOL sol, SCIP_RESULT result, SCIP_Bool infeasible, SCIP_Bool auxviol, SCIP_BENDERSENFOTYPE type, SCIP_Bool checkint)

SCIP_RETCODE	SCIPgetBendersMasterVar (SCIP scip, SCIP_BENDERS benders, SCIP_VAR var, SCIP_VAR *mappedvar)

SCIP_RETCODE	SCIPgetBendersSubproblemVar (SCIP scip, SCIP_BENDERS benders, SCIP_VAR var, SCIP_VAR *mappedvar, int probnumber)

int	SCIPgetBendersNSubproblems (SCIP scip, SCIP_BENDERS benders)

SCIP_RETCODE	SCIPaddBendersSubproblem (SCIP scip, SCIP_BENDERS benders, SCIP *subproblem)

SCIP_RETCODE	SCIPsetupBendersSubproblem (SCIP scip, SCIP_BENDERS benders, SCIP_SOL *sol, int probnumber)

SCIP_RETCODE	SCIPsolveBendersSubproblem (SCIP scip, SCIP_BENDERS benders, SCIP_SOL sol, int probnumber, SCIP_Bool infeasible, SCIP_BENDERSENFOTYPE type, SCIP_Bool solvecip, SCIP_Real *objective)

SCIP_RETCODE	SCIPfreeBendersSubproblem (SCIP scip, SCIP_BENDERS benders, int probnumber)

SCIP_RETCODE	SCIPcheckBendersSubproblemOptimality (SCIP scip, SCIP_BENDERS benders, SCIP_SOL sol, int probnumber, SCIP_Bool optimal)

SCIP_Real	SCIPgetBendersAuxiliaryVarVal (SCIP scip, SCIP_BENDERS benders, SCIP_SOL *sol, int probnumber)

SCIP_RETCODE	SCIPcomputeBendersSubproblemLowerbound (SCIP scip, SCIP_BENDERS benders, int probnumber, SCIP_Real lowerbound, SCIP_Bool infeasible)

SCIP_RETCODE	SCIPmergeBendersSubproblemIntoMaster (SCIP scip, SCIP_BENDERS benders, SCIP_HASHMAP varmap, SCIP_HASHMAP consmap, int probnumber)

Function Documentation

◆ SCIP_DECL_SORTPTRCOMP() [1/2]

SCIP_DECL_SORTPTRCOMP ( SCIPbendersComp )

compares two benderss w. r. to their priority

compares two Benders' decompositions w. r. to their priority

Definition at line 709 of file benders.c.

◆ SCIP_DECL_SORTPTRCOMP() [2/2]

SCIP_DECL_SORTPTRCOMP ( SCIPbendersCompName )

comparison method for sorting benderss w.r.t. to their name

comparison method for sorting Benders' decompositions w.r.t. to their name

Definition at line 715 of file benders.c.

References SCIPbendersGetName().

◆ SCIPbendersGetData()

SCIP_BENDERSDATA* SCIPbendersGetData ( SCIP_BENDERS * benders )

gets user data of Benders' decomposition

Parameters

benders Benders' decomposition

Definition at line 4030 of file benders.c.

References SCIP_Benders::bendersdata, and NULL.

◆ SCIPbendersSetData()

void SCIPbendersSetData	(	SCIP_BENDERS *	benders,
		SCIP_BENDERSDATA *	bendersdata
	)

sets user data of Benders' decomposition; user has to free old data in advance!

Parameters

benders	Benders' decomposition
bendersdata	new Benders' decomposition user data

Definition at line 4040 of file benders.c.

References SCIP_Benders::bendersdata, and NULL.

Referenced by SCIP_DECL_BENDERSFREE().

◆ SCIPbendersGetName()

const char* SCIPbendersGetName ( SCIP_BENDERS * benders )

gets name of Benders' decomposition

Parameters

benders Benders' decomposition

Definition at line 4194 of file benders.c.

References SCIP_Benders::name, and NULL.

Referenced by addAuxiliaryVariablesToMaster(), assignAuxiliaryVariables(), createAndAddTransferredCut(), SCIP_DECL_DIALOGEXEC(), SCIP_DECL_SORTPTRCOMP(), SCIPbendersCopyInclude(), SCIPbenderscutCreate(), SCIPbendersExec(), SCIPincludeBenderscutInt(), SCIPincludeBenderscutNogood(), SCIPincludeBenderscutOpt(), SCIPprintBendersStatistics(), SCIPsetBendersSolveAndFreesub(), SCIPsetFindPricer(), and transferBendersCuts().

◆ SCIPbendersGetDesc()

const char* SCIPbendersGetDesc ( SCIP_BENDERS * benders )

gets description of Benders' decomposition

Parameters

benders Benders' decomposition

Definition at line 4204 of file benders.c.

References SCIP_Benders::desc, and NULL.

Referenced by SCIP_DECL_DIALOGEXEC().

◆ SCIPbendersGetPriority()

int SCIPbendersGetPriority ( SCIP_BENDERS * benders )

gets priority of Benders' decomposition

Parameters

benders Benders' decomposition

Definition at line 4214 of file benders.c.

References NULL, and SCIP_Benders::priority.

Referenced by SCIP_DECL_DIALOGEXEC().

◆ SCIPbendersGetNSubproblems()

int SCIPbendersGetNSubproblems ( SCIP_BENDERS * benders )

gets the number of subproblems for the Benders' decomposition

Parameters

benders the Benders' decomposition data structure

Definition at line 4238 of file benders.c.

References SCIP_Benders::nsubproblems, and NULL.

Referenced by addAuxiliaryVariablesToMaster(), assignAuxiliaryVariables(), checkSubproblemIndependence(), constructValidSolution(), createSubproblems(), generateBendersCuts(), initialiseLPSubproblem(), initialiseSubproblem(), numSubproblemsToCheck(), resetSubproblemObjectiveValue(), SCIP_DECL_BENDERSCUTEXEC(), SCIP_DECL_BENDERSCUTINIT(), SCIP_DECL_CONSPRESOL(), SCIP_DECL_DIALOGEXEC(), SCIP_DECL_EVENTEXEC(), SCIPbendersChgMastervarsToCont(), SCIPbendersDeactivate(), SCIPbendersExec(), SCIPbendersExit(), SCIPbendersExitsol(), SCIPbendersGetAuxiliaryVar(), SCIPbendersGetMastervarsCont(), SCIPbendersGetSubproblemLowerbound(), SCIPbendersGetSubproblemObjval(), SCIPbendersSetMastervarsCont(), SCIPbendersSetSubproblemEnabled(), SCIPbendersSetSubproblemIsConvex(), SCIPbendersSetSubproblemIsIndependent(), SCIPbendersSetSubproblemIsSetup(), SCIPbendersSetSubproblemObjval(), SCIPbendersSetupSubproblem(), SCIPbendersSolveSubproblem(), SCIPbendersSubproblemIsConvex(), SCIPbendersSubproblemIsEnabled(), SCIPbendersSubproblemIsIndependent(), SCIPbendersSubproblemIsSetup(), SCIPbendersUpdateSubproblemLowerbound(), SCIPcheckBendersSubproblemOptimality(), SCIPgetBendersAuxiliaryVarVal(), SCIPgetBendersNSubproblems(), solveBendersSubproblems(), updateAuxiliaryVarLowerbound(), and updateSubproblemLowerbound().

◆ SCIPbendersSubproblem()

SCIP* SCIPbendersSubproblem	(	SCIP_BENDERS *	benders,
		int	probnumber
	)

returns the SCIP instance for a given subproblem

Parameters

benders	the Benders' decomposition data structure
probnumber	the subproblem number

Definition at line 4248 of file benders.c.

References NULL, and SCIP_Benders::subproblems.

Referenced by computeStandardIntegerOptCut(), createSubproblems(), initialiseLPSubproblem(), initialiseSubproblem(), resetSubproblemObjectiveValue(), SCIP_DECL_BENDERSCUTEXEC(), SCIP_DECL_DIALOGEXEC(), SCIPbendersChgMastervarsToCont(), SCIPbendersComputeSubproblemLowerbound(), SCIPbendersExec(), SCIPbendersExecSubproblemSolve(), SCIPbendersFreeSubproblem(), SCIPbendersMergeSubproblemIntoMaster(), SCIPbendersSetMastervarsCont(), SCIPbendersSetupSubproblem(), SCIPbendersSolveSubproblem(), SCIPbendersSolveSubproblemCIP(), SCIPbendersSolveSubproblemLP(), SCIPcheckBendersSubproblemOptimality(), solveBendersSubproblems(), and updateEventhdlrUpperbound().

◆ SCIPbendersGetNCalls()

int SCIPbendersGetNCalls ( SCIP_BENDERS * benders )

gets the number of times, the Bender' decomposition was called and tried to find a violated second stage constraint

gets the number of times, the Benders' decomposition was called and tried to find a variable with negative reduced costs

Parameters

benders Benders' decomposition

Definition at line 4260 of file benders.c.

References SCIP_Benders::ncalls, and NULL.

Referenced by SCIP_DECL_BENDERSCUTEXEC(), and SCIPprintBendersStatistics().

◆ SCIPbendersGetNCutsFound()

int SCIPbendersGetNCutsFound ( SCIP_BENDERS * benders )

gets the number of optimality cuts found by the collection of Benders' decomposition subproblems

Parameters

benders Benders' decomposition

Definition at line 4270 of file benders.c.

References SCIP_Benders::ncutsfound, and NULL.

Referenced by SCIPprintBendersStatistics().

◆ SCIPbendersGetSetupTime()

SCIP_Real SCIPbendersGetSetupTime ( SCIP_BENDERS * benders )

gets time in seconds used in this Benders' decomposition for setting up for next stages

Parameters

benders Benders' decomposition

Definition at line 4280 of file benders.c.

References NULL, SCIPclockGetTime(), and SCIP_Benders::setuptime.

Referenced by SCIPprintBendersStatistics().

◆ SCIPbendersGetTime()

SCIP_Real SCIPbendersGetTime ( SCIP_BENDERS * benders )

gets execution time in seconds used in this Benders' decomposition

gets time in seconds used in this Benders' decomposition

Parameters

benders Benders' decomposition

Definition at line 4290 of file benders.c.

References SCIP_Benders::bendersclock, NULL, and SCIPclockGetTime().

Referenced by SCIPprintBendersStatistics().

◆ SCIPbendersIsInitialized()

SCIP_Bool SCIPbendersIsInitialized ( SCIP_BENDERS * benders )

Is Benders' decomposition initialized?

is Benders' decomposition initialized?

Parameters

benders Benders' decomposition

Definition at line 4312 of file benders.c.

References SCIP_Benders::initialized, and NULL.

◆ SCIPbendersIsActive()

SCIP_Bool SCIPbendersIsActive ( SCIP_BENDERS * benders )

returns whether the given Benders' decomposition is in use in the current problem

Parameters

benders the Benders' decomposition structure

Definition at line 1932 of file benders.c.

References SCIP_Benders::active, and NULL.

Referenced by SCIP_DECL_BENDERSCOPY(), SCIP_DECL_DIALOGEXEC(), SCIP_DECL_EVENTINITSOL(), SCIPbendersCopyInclude(), and SCIPprintBendersStatistics().

◆ SCIPbendersOnlyCheckConvexRelax()

SCIP_Bool SCIPbendersOnlyCheckConvexRelax ( SCIP_BENDERS * benders )

Returns whether only the convex relaxations will be checked in this solve loop when Benders' is used in the LNS heuristics, only the convex relaxations of the master/subproblems are checked, i.e. no integer cuts are generated. In this case, then Benders' decomposition is performed under the assumption that all subproblems are convex relaxations.

Parameters

benders Benders' decomposition

Definition at line 2001 of file benders.c.

References SCIP_Benders::iscopy, and SCIP_Benders::lnscheck.

Referenced by executeUserDefinedSolvesub(), generateBendersCuts(), numSubproblemsToCheck(), SCIP_DECL_EVENTINITSOL(), SCIPbendersExec(), and solveBendersSubproblems().

◆ SCIPbendersCutLP()

SCIP_Bool SCIPbendersCutLP ( SCIP_BENDERS * benders )

Are Benders' cuts generated from the LP solutions?

Parameters

benders Benders' decomposition

Definition at line 4322 of file benders.c.

References SCIP_Benders::cutlp, and NULL.

Referenced by SCIPconsBendersEnforceSolution().

◆ SCIPbendersCutPseudo()

SCIP_Bool SCIPbendersCutPseudo ( SCIP_BENDERS * benders )

Are Benders' cuts generated from the pseudo solutions?

Parameters

benders Benders' decomposition

Definition at line 4332 of file benders.c.

References SCIP_Benders::cutpseudo, and NULL.

Referenced by SCIPconsBendersEnforceSolution().

◆ SCIPbendersCutRelaxation()

SCIP_Bool SCIPbendersCutRelaxation ( SCIP_BENDERS * benders )

Are Benders' cuts generated from the relaxation solutions?

Parameters

benders Benders' decomposition

Definition at line 4342 of file benders.c.

References SCIP_Benders::cutrelax, and NULL.

Referenced by SCIPconsBendersEnforceSolution().

◆ SCIPbendersShareAuxVars()

SCIP_Bool SCIPbendersShareAuxVars ( SCIP_BENDERS * benders )

Should this Benders' use the auxiliary variables from the highest priority Benders'?

should this Benders' use the auxiliary variables from the highest priority Benders'

Parameters

benders Benders' decomposition

Definition at line 4352 of file benders.c.

References NULL, and SCIP_Benders::shareauxvars.

Referenced by addAuxiliaryVariablesToMaster(), and assignAuxiliaryVariables().

◆ SCIPbendersGetAuxiliaryVar()

SCIP_VAR* SCIPbendersGetAuxiliaryVar	(	SCIP_BENDERS *	benders,
		int	probnumber
	)

returns the auxiliary variable for the given subproblem

Parameters

benders	Benders' decomposition
probnumber	the subproblem number

Definition at line 4392 of file benders.c.

References SCIP_Benders::auxiliaryvars, NULL, and SCIPbendersGetNSubproblems().

Referenced by addAuxiliaryVariablesToMaster(), addAuxiliaryVariableToCut(), SCIP_DECL_CONSPRESOL(), SCIPbendersGetAuxiliaryVarVal(), SCIPbendersMergeSubproblemIntoMaster(), updateAuxiliaryVarLowerbound(), and updateSubproblemLowerbound().

◆ SCIPbendersGetAuxiliaryVars()

SCIP_VAR** SCIPbendersGetAuxiliaryVars ( SCIP_BENDERS * benders )

returns all auxiliary variables

Parameters

benders Benders' decomposition

Definition at line 4404 of file benders.c.

References SCIP_Benders::auxiliaryvars, and NULL.

Referenced by constructValidSolution().

◆ SCIPbendersSetSubproblemObjval()

void SCIPbendersSetSubproblemObjval	(	SCIP_BENDERS *	benders,
		int	probnumber,
		SCIP_Real	objval
	)

stores the objective function value of the subproblem for use in cut generation

Parameters

benders	the Benders' decomposition structure
probnumber	the subproblem number
objval	the objective function value for the subproblem

Definition at line 4414 of file benders.c.

References SCIP_Benders::bestsubprobobjval, NULL, SCIPbendersGetNSubproblems(), and SCIP_Benders::subprobobjval.

Referenced by resetSubproblemObjectiveValue(), SCIPbendersExecSubproblemSolve(), and solveBendersSubproblems().

◆ SCIPbendersGetSubproblemObjval()

SCIP_Real SCIPbendersGetSubproblemObjval	(	SCIP_BENDERS *	benders,
		int	probnumber
	)

returns the objective function value of the subproblem for use in cut generation

Parameters

benders	Benders' decomposition
probnumber	the subproblem number

Definition at line 4431 of file benders.c.

References NULL, SCIPbendersGetNSubproblems(), and SCIP_Benders::subprobobjval.

Referenced by computeStandardIntegerOptCut(), constructValidSolution(), SCIPbendersCheckSubproblemOptimality(), and solveBendersSubproblems().

◆ SCIPfindBenderscut()

SCIP_BENDERSCUT* SCIPfindBenderscut	(	SCIP_BENDERS *	benders,
		const char *	name
	)

returns the Benders' cut of the given name, or NULL if not existing

Parameters

benders	Benders' decomposition
name	name of Benderscut' decomposition

Definition at line 4799 of file benders.c.

References SCIP_Benders::benderscuts, SCIP_Benders::nbenderscuts, NULL, and SCIPbenderscutGetName().

Referenced by SCIPfindObjBenderscut(), SCIPincludeBenderscut(), and SCIPincludeBenderscutBasic().

◆ SCIPbendersGetBenderscuts()

SCIP_BENDERSCUT** SCIPbendersGetBenderscuts ( SCIP_BENDERS * benders )

returns the array of currently available Benders' cuts; active Benders' decomposition are in the first slots of the array

Parameters

benders Benders' decomposition

Definition at line 4821 of file benders.c.

References SCIP_Benders::benderscuts, SCIP_Benders::benderscutsnamessorted, SCIP_Benders::benderscutssorted, FALSE, SCIP_Benders::nbenderscuts, NULL, SCIPsortPtr(), and TRUE.

Referenced by generateBendersCuts(), and SCIPprintBendersStatistics().

◆ SCIPbendersGetNBenderscuts()

int SCIPbendersGetNBenderscuts ( SCIP_BENDERS * benders )

returns the number of currently available Benders' cuts

Parameters

benders Benders' decomposition

Definition at line 4838 of file benders.c.

References SCIP_Benders::nbenderscuts, and NULL.

Referenced by generateBendersCuts(), and SCIPprintBendersStatistics().

◆ SCIPbendersSetBenderscutPriority()

SCIP_RETCODE SCIPbendersSetBenderscutPriority	(	SCIP_BENDERS *	benders,
		SCIP_BENDERSCUT *	benderscut,
		int	priority
	)

sets the priority of a Benders' decomposition

Parameters

benders	Benders' decomposition
benderscut	Benders' cut
priority	new priority of the Benders' decomposition

Definition at line 4848 of file benders.c.

References SCIP_Benders::benderscutssorted, FALSE, NULL, SCIP_Benderscut::priority, and SCIP_OKAY.

◆ SCIPbendersSetSubproblemIsConvex()

void SCIPbendersSetSubproblemIsConvex	(	SCIP_BENDERS *	benders,
		int	probnumber,
		SCIP_Bool	isconvex
	)

sets the flag indicating whether a subproblem is convex

It is possible that this can change during the solving process. One example is when the three-phase method is employed, where the first phase solves the convex relaxation of both the master and subproblems, the second phase reintroduces the integrality constraints to the master problem and the third phase then reintroduces integrality constraints to the subproblems.

Parameters

benders	Benders' decomposition
probnumber	the subproblem number
isconvex	flag to indicate whether the subproblem is convex

Definition at line 4449 of file benders.c.

References SCIP_Benders::nconvexsubprobs, SCIP_Benders::nsubproblems, NULL, SCIPbendersGetNSubproblems(), and SCIP_Benders::subprobisconvex.

Referenced by createSubproblems(), SCIPbendersChgMastervarsToCont(), and SCIPbendersSetMastervarsCont().

◆ SCIPbendersSubproblemIsConvex()

SCIP_Bool SCIPbendersSubproblemIsConvex	(	SCIP_BENDERS *	benders,
		int	probnumber
	)

returns whether the subproblem is convex

This means that the dual solution can be used to generate cuts.

Parameters

benders	Benders' decomposition
probnumber	the subproblem number

Definition at line 4472 of file benders.c.

References NULL, SCIPbendersGetNSubproblems(), and SCIP_Benders::subprobisconvex.

Referenced by generateBendersCuts(), SCIP_DECL_DIALOGEXEC(), SCIPbendersComputeSubproblemLowerbound(), SCIPbendersExecSubproblemSolve(), SCIPbendersFreeSubproblem(), SCIPbendersSetupSubproblem(), SCIPbendersSolveSubproblem(), and solveBendersSubproblems().

◆ SCIPbendersGetNConvexSubproblems()

int SCIPbendersGetNConvexSubproblems ( SCIP_BENDERS * benders )

returns the number of subproblems that are convex

Parameters

benders Benders' decomposition

Definition at line 4484 of file benders.c.

References SCIP_Benders::nconvexsubprobs, and NULL.

Referenced by generateBendersCuts(), SCIP_DECL_EVENTEXEC(), and SCIPbendersExec().

◆ SCIPbendersSolveSubproblemLP()

SCIP_RETCODE SCIPbendersSolveSubproblemLP	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		int	probnumber,
		SCIP_Bool *	infeasible
	)

solves the LP of the Benders' decomposition subproblem

This requires that the subproblem is in probing mode.

Parameters

scip	the SCIP data structure
benders	the Benders' decomposition data structure
probnumber	the subproblem number
infeasible	a flag to indicate whether all subproblems are feasible

Definition at line 3445 of file benders.c.

References FALSE, NULL, resetOrigSubproblemParams(), SCIP_Bool, SCIP_CALL, SCIP_LPSOLSTAT_ERROR, SCIP_LPSOLSTAT_INFEASIBLE, SCIP_LPSOLSTAT_NOTSOLVED, SCIP_LPSOLSTAT_OPTIMAL, SCIP_LPSOLSTAT_TIMELIMIT, SCIP_LPSOLSTAT_UNBOUNDEDRAY, SCIP_OKAY, SCIPABORT, SCIPallocBlockMemory, SCIPbendersSubproblem(), SCIPbendersSubproblemIsSetup(), SCIPerrorMessage, SCIPfreeBlockMemory, SCIPgetLPSolstat(), SCIPinProbing(), SCIPisLPConstructed(), SCIPsolveProbingLP(), setSubproblemParams(), storeOrigSubproblemParams(), and TRUE.

Referenced by SCIPbendersExecSubproblemSolve(), and SCIPbendersSolveSubproblem().

◆ SCIPbendersSolveSubproblemCIP()

SCIP_RETCODE SCIPbendersSolveSubproblemCIP	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		int	probnumber,
		SCIP_Bool *	infeasible,
		SCIP_BENDERSENFOTYPE	type,
		SCIP_Bool	solvecip
	)

solves the Benders' decomposition subproblem

Parameters

scip	the SCIP data structure
benders	the Benders' decomposition data structure
probnumber	the subproblem number
infeasible	returns whether the current subproblem is infeasible
type	the enforcement type calling this function
solvecip	directly solve the CIP subproblem

Definition at line 3504 of file benders.c.

References FALSE, MIPNODEFOCUS_EVENTHDLR_NAME, NULL, resetOrigSubproblemParams(), SCIP_BENDERSENFOTYPE_CHECK, SCIP_CALL, SCIP_OKAY, SCIP_PARAMSETTING_FAST, SCIP_STAGE_SOLVING, SCIP_STATUS_BESTSOLLIMIT, SCIP_STATUS_INFEASIBLE, SCIP_STATUS_MEMLIMIT, SCIP_STATUS_OPTIMAL, SCIP_STATUS_TIMELIMIT, SCIP_STATUS_UNBOUNDED, SCIP_STATUS_USERINTERRUPT, SCIP_VERBLEVEL_FULL, SCIPABORT, SCIPallocBlockMemory, SCIPbendersSubproblem(), SCIPendProbing(), SCIPerrorMessage, SCIPeventhdlrGetData(), SCIPfindEventhdlr(), SCIPfreeBlockMemory, SCIPgetStage(), SCIPgetStatus(), SCIPinProbing(), SCIPrestartSolve(), SCIPsetBoolParam(), SCIPsetHeuristics(), SCIPsetIntParam(), SCIPsolve(), setSubproblemParams(), storeOrigSubproblemParams(), and TRUE.

Referenced by initialiseSubproblem(), SCIPbendersExecSubproblemSolve(), and SCIPbendersSolveSubproblem().

◆ SCIPbendersGetNTransferredCuts()

int SCIPbendersGetNTransferredCuts ( SCIP_BENDERS * benders )

returns the number of cuts that have been transferred from sub SCIPs to the master SCIP

Parameters

benders the Benders' decomposition data structure

Definition at line 4720 of file benders.c.

References SCIP_Benders::ntransferred, and NULL.

Referenced by createAndAddTransferredCut(), and SCIPprintBendersStatistics().

◆ SCIPbendersUpdateSubproblemLowerbound()

void SCIPbendersUpdateSubproblemLowerbound	(	SCIP_BENDERS *	benders,
		int	probnumber,
		SCIP_Real	lowerbound
	)

updates the lower bound for the subproblem. If the lower bound is not greater than the previously stored lowerbound, then no update occurs.

Parameters

benders	Benders' decomposition
probnumber	the subproblem number
lowerbound	the lower bound

Definition at line 4732 of file benders.c.

References NULL, SCIPbendersGetNSubproblems(), SCIPdebugMessage, and SCIP_Benders::subproblowerbound.

Referenced by SCIP_DECL_CONSPRESOL(), updateAuxiliaryVarLowerbound(), and updateSubproblemLowerbound().

◆ SCIPbendersGetSubproblemLowerbound()

SCIP_Real SCIPbendersGetSubproblemLowerbound	(	SCIP_BENDERS *	benders,
		int	probnumber
	)

returns the stored lower bound for the given subproblem

Parameters

benders	Benders' decomposition
probnumber	the subproblem number

Definition at line 4751 of file benders.c.

References NULL, SCIPbendersGetNSubproblems(), and SCIP_Benders::subproblowerbound.

Referenced by generateAndApplyBendersIntegerCuts(), solveBendersSubproblems(), and updateSubproblemLowerbound().

◆ SCIPbendersSetSubproblemIsIndependent()

void SCIPbendersSetSubproblemIsIndependent	(	SCIP_BENDERS *	benders,
		int	probnumber,
		SCIP_Bool	isindep
	)

sets the independent subproblem flag

Parameters

benders	Benders' decomposition
probnumber	the subproblem number
isindep	flag to indicate whether the subproblem is independent

Definition at line 4589 of file benders.c.

References SCIP_Benders::indepsubprob, SCIP_Benders::nactivesubprobs, SCIP_Benders::name, NULL, SCIP_Bool, SCIPABORT, SCIPbendersGetNSubproblems(), SCIPerrorMessage, and subproblemIsActive().

Referenced by checkSubproblemIndependence(), and SCIPbendersExitsol().

◆ SCIPbendersSubproblemIsIndependent()

SCIP_Bool SCIPbendersSubproblemIsIndependent	(	SCIP_BENDERS *	benders,
		int	probnumber
	)

returns whether the subproblem is independent

Parameters

benders	Benders' decomposition
probnumber	the subproblem number

Definition at line 4629 of file benders.c.

References SCIP_Benders::indepsubprob, NULL, and SCIPbendersGetNSubproblems().

Referenced by SCIPbendersComputeSubproblemLowerbound(), SCIPbendersExitsol(), SCIPbendersSolveSubproblem(), and subproblemIsActive().

◆ SCIPbendersSubproblemIsEnabled()

SCIP_Bool SCIPbendersSubproblemIsEnabled	(	SCIP_BENDERS *	benders,
		int	probnumber
	)

returns whether the subproblem is enabled, i.e. the subproblem is still solved in the solving loop.

Parameters

benders	Benders' decomposition
probnumber	the subproblem number

Definition at line 4669 of file benders.c.

References NULL, SCIPbendersGetNSubproblems(), and SCIP_Benders::subprobenabled.

Referenced by subproblemIsActive().

◆ SCIPincludeBenders()

SCIP_RETCODE SCIPincludeBenders	(	SCIP *	scip,
		const char *	name,
		const char *	desc,
		int	priority,
		SCIP_Bool	cutlp,
		SCIP_Bool	cutpseudo,
		SCIP_Bool	cutrelax,
		SCIP_Bool	shareauxvars,
		SCIP_DECL_BENDERSCOPY((*benderscopy))	,
		SCIP_DECL_BENDERSFREE((*bendersfree))	,
		SCIP_DECL_BENDERSINIT((*bendersinit))	,
		SCIP_DECL_BENDERSEXIT((*bendersexit))	,
		SCIP_DECL_BENDERSINITPRE((*bendersinitpre))	,
		SCIP_DECL_BENDERSEXITPRE((*bendersexitpre))	,
		SCIP_DECL_BENDERSINITSOL((*bendersinitsol))	,
		SCIP_DECL_BENDERSEXITSOL((*bendersexitsol))	,
		SCIP_DECL_BENDERSGETVAR((*bendersgetvar))	,
		SCIP_DECL_BENDERSCREATESUB((*benderscreatesub))	,
		SCIP_DECL_BENDERSPRESUBSOLVE((*benderspresubsolve))	,
		SCIP_DECL_BENDERSSOLVESUBCONVEX((*benderssolvesubconvex))	,
		SCIP_DECL_BENDERSSOLVESUB((*benderssolvesub))	,
		SCIP_DECL_BENDERSPOSTSOLVE((*benderspostsolve))	,
		SCIP_DECL_BENDERSFREESUB((*bendersfreesub))	,
		SCIP_BENDERSDATA *	bendersdata
	)

creates a Benders' decomposition and includes it in SCIP

To use the Benders' decomposition for solving a problem, it first has to be activated with a call to SCIPactivateBenders(). This should be done during the problem creation stage.

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

Note: method has all Benders' decomposition callbacks as arguments and is thus changed every time a new callback is added in future releases; consider using SCIPincludeBendersBasic() and setter functions if you seek for a method which is less likely to change in future releases

Parameters

scip	SCIP data structure
name	name of Benders' decomposition
desc	description of Benders' decomposition
priority	priority of the Benders' decomposition
cutlp	should Benders' cuts be generated for LP solutions
cutpseudo	should Benders' cuts be generated for pseudo solutions
cutrelax	should Benders' cuts be generated for relaxation solutions
shareauxvars	should this Benders' use the highest priority Benders aux vars
bendersdata	Benders' decomposition data

Definition at line 143 of file scip_benders.c.

References FALSE, Scip::mem, Scip::messagehdlr, NULL, SCIP_CALL, SCIP_INVALIDCALL, SCIP_INVALIDDATA, SCIP_OKAY, SCIPbendersCreate(), SCIPcheckStage(), SCIPerrorMessage, SCIPfindBenders(), SCIPsetIncludeBenders(), Scip::set, SCIP_Mem::setmem, and TRUE.

Referenced by SCIPincludeObjBenders().

◆ SCIPincludeBendersBasic()

SCIP_RETCODE SCIPincludeBendersBasic	(	SCIP *	scip,
		SCIP_BENDERS **	bendersptr,
		const char *	name,
		const char *	desc,
		int	priority,
		SCIP_Bool	cutlp,
		SCIP_Bool	cutpseudo,
		SCIP_Bool	cutrelax,
		SCIP_Bool	shareauxvars,
		SCIP_DECL_BENDERSGETVAR((*bendersgetvar))	,
		SCIP_DECL_BENDERSCREATESUB((*benderscreatesub))	,
		SCIP_BENDERSDATA *	bendersdata
	)

creates a Benders' decomposition and includes it in SCIP with all non-fundamental callbacks set to NULL

If needed, the non-fundamental callbacks can be added afterwards via setter functions SCIPsetBendersCopy(), SCIPsetBendersFree(), SCIPsetBendersInity(), SCIPsetBendersExit(), SCIPsetBendersInitsol(), SCIPsetBendersExitsol(), SCIPsetBendersFarkas().

To use the Benders' decomposition for solving a problem, it first has to be activated with a call to SCIPactivateBenders(). This should be done during the problem creation stage.

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

Note: if you want to set all callbacks with a single method call, consider using SCIPincludeBenders() instead

Parameters

scip	SCIP data structure
bendersptr	reference to a benders, or NULL
name	name of Benders' decomposition
desc	description of Benders' decomposition
priority	priority of the Benders' decomposition
cutlp	should Benders' cuts be generated for LP solutions
cutpseudo	should Benders' cuts be generated for pseudo solutions
cutrelax	should Benders' cuts be generated for relaxation solutions
shareauxvars	should this Benders' use the highest priority Benders aux vars
bendersdata	Benders' decomposition data

Definition at line 218 of file scip_benders.c.

References FALSE, Scip::mem, Scip::messagehdlr, NULL, SCIP_CALL, SCIP_INVALIDDATA, SCIP_OKAY, SCIPbendersCreate(), SCIPcheckStage(), SCIPerrorMessage, SCIPfindBenders(), SCIPsetIncludeBenders(), Scip::set, SCIP_Mem::setmem, and TRUE.

Referenced by SCIPincludeBendersDefault().

◆ SCIPsetBendersCopy()

SCIP_RETCODE SCIPsetBendersCopy	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		SCIP_DECL_BENDERSCOPY((*benderscopy))
	)

sets copy method of benders

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

Parameters

scip	SCIP data structure
benders	Benders' decomposition

Definition at line 264 of file scip_benders.c.

References FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPbendersSetCopy(), SCIPcheckStage(), and TRUE.

Referenced by SCIPincludeBendersDefault().

◆ SCIPsetBendersFree()

SCIP_RETCODE SCIPsetBendersFree	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		SCIP_DECL_BENDERSFREE((*bendersfree))
	)

sets destructor method of benders

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

Parameters

scip	SCIP data structure
benders	Benders' decomposition

Definition at line 288 of file scip_benders.c.

References FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPbendersSetFree(), SCIPcheckStage(), and TRUE.

Referenced by SCIPincludeBendersDefault().

◆ SCIPsetBendersInit()

SCIP_RETCODE SCIPsetBendersInit	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		SCIP_DECL_BENDERSINIT((*bendersinit))
	)

sets initialization method of benders

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

Parameters

scip	SCIP data structure
benders	Benders' decomposition

Definition at line 312 of file scip_benders.c.

References FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPbendersSetInit(), SCIPcheckStage(), and TRUE.

Referenced by SCIPincludeBendersDefault().

◆ SCIPsetBendersExit()

SCIP_RETCODE SCIPsetBendersExit	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		SCIP_DECL_BENDERSEXIT((*bendersexit))
	)

sets deinitialization method of benders

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

Parameters

scip	SCIP data structure
benders	Benders' decomposition

Definition at line 336 of file scip_benders.c.

References FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPbendersSetExit(), SCIPcheckStage(), and TRUE.

◆ SCIPsetBendersInitpre()

SCIP_RETCODE SCIPsetBendersInitpre	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		SCIP_DECL_BENDERSINITPRE((*bendersinitpre))
	)

sets presolving initialization method of benders

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

Parameters

scip	SCIP data structure
benders	Benders' decomposition

Definition at line 360 of file scip_benders.c.

References FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPbendersSetInitpre(), SCIPcheckStage(), and TRUE.

◆ SCIPsetBendersExitpre()

SCIP_RETCODE SCIPsetBendersExitpre	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		SCIP_DECL_BENDERSEXITPRE((*bendersexitpre))
	)

sets presolving deinitialization method of benders

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

Parameters

scip	SCIP data structure
benders	Benders' decomposition

Definition at line 384 of file scip_benders.c.

References FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPbendersSetExitpre(), SCIPcheckStage(), and TRUE.

◆ SCIPsetBendersInitsol()

SCIP_RETCODE SCIPsetBendersInitsol	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		SCIP_DECL_BENDERSINITSOL((*bendersinitsol))
	)

sets solving process initialization method of benders

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

Parameters

scip	SCIP data structure
benders	Benders' decomposition

Definition at line 408 of file scip_benders.c.

References FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPbendersSetInitsol(), SCIPcheckStage(), and TRUE.

◆ SCIPsetBendersExitsol()

SCIP_RETCODE SCIPsetBendersExitsol	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		SCIP_DECL_BENDERSEXITSOL((*bendersexitsol))
	)

sets solving process deinitialization method of benders

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

Parameters

scip	SCIP data structure
benders	Benders' decomposition

Definition at line 432 of file scip_benders.c.

References FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPbendersSetExitsol(), SCIPcheckStage(), and TRUE.

◆ SCIPsetBendersPresubsolve()

SCIP_RETCODE SCIPsetBendersPresubsolve	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		SCIP_DECL_BENDERSPRESUBSOLVE((*benderspresubsolve))
	)

sets the method called prior to solving the subproblems for benders

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

Parameters

scip	SCIP data structure
benders	Benders' decomposition

Definition at line 456 of file scip_benders.c.

References FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPbendersSetPresubsolve(), SCIPcheckStage(), and TRUE.

◆ SCIPsetBendersSolveAndFreesub()

SCIP_RETCODE SCIPsetBendersSolveAndFreesub	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		SCIP_DECL_BENDERSSOLVESUBCONVEX((*benderssolvesubconvex))	,
		SCIP_DECL_BENDERSSOLVESUB((*benderssolvesub))	,
		SCIP_DECL_BENDERSFREESUB((*bendersfreesub))
	)

sets the subproblem solving and freeing methods for Benders' decomposition

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

Parameters

scip	SCIP data structure
benders	Benders' decomposition

Definition at line 480 of file scip_benders.c.

References FALSE, NULL, SCIP_CALL, SCIP_INVALIDCALL, SCIP_OKAY, SCIPbendersGetName(), SCIPbendersSetFreesub(), SCIPbendersSetSolvesub(), SCIPbendersSetSolvesubconvex(), SCIPcheckStage(), SCIPerrorMessage, and TRUE.

◆ SCIPsetBendersPostsolve()

SCIP_RETCODE SCIPsetBendersPostsolve	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		SCIP_DECL_BENDERSPOSTSOLVE((*benderspostsolve))
	)

sets the post solving methods for benders

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

Parameters

scip	SCIP data structure
benders	Benders' decomposition

Definition at line 520 of file scip_benders.c.

References FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPbendersSetPostsolve(), SCIPcheckStage(), and TRUE.

◆ SCIPfindBenders()

SCIP_BENDERS* SCIPfindBenders	(	SCIP *	scip,
		const char *	name
	)

returns the Benders' decomposition of the given name, or NULL if not existing

Parameters

scip	SCIP data structure
name	name of Benders' decomposition

Definition at line 536 of file scip_benders.c.

References NULL, SCIPsetFindBenders(), and Scip::set.

Referenced by createAndAddTransferredCut(), SCIPcreateBendersDefault(), SCIPfindObjBenders(), SCIPfindObjBenderscut(), SCIPincludeBenders(), SCIPincludeBendersBasic(), SCIPincludeObjBenderscut(), and transferBendersCuts().

◆ SCIPgetBenders()

SCIP_BENDERS** SCIPgetBenders ( SCIP * scip )

returns the array of currently available Benders' decomposition; active Benders' decomposition are in the first slots of the array

Parameters

scip	SCIP data structure

Definition at line 551 of file scip_benders.c.

References SCIP_Set::benders, NULL, SCIPsetSortBenders(), and Scip::set.

Referenced by addAuxiliaryVariablesToMaster(), assignAuxiliaryVariables(), constructValidSolution(), SCIP_DECL_CONSCHECK(), SCIP_DECL_CONSPRESOL(), SCIP_DECL_DIALOGEXEC(), SCIPconsBendersEnforceSolution(), SCIPprintBendersStatistics(), and SCIPsetBenderscutPriority().

◆ SCIPgetNBenders()

int SCIPgetNBenders ( SCIP * scip )

returns the number of currently available Benders' decomposition

Parameters

scip	SCIP data structure

Definition at line 564 of file scip_benders.c.

References SCIP_Set::nbenders, NULL, and Scip::set.

Referenced by SCIP_DECL_DIALOGEXEC(), SCIPprintBendersStatistics(), and SCIPsetBenderscutPriority().

◆ SCIPgetNActiveBenders()

int SCIPgetNActiveBenders ( SCIP * scip )

returns the number of currently active Benders' decomposition

Parameters

scip	SCIP data structure

Definition at line 575 of file scip_benders.c.

References SCIP_Set::nactivebenders, NULL, and Scip::set.

Referenced by constructValidSolution(), SCIP_DECL_CONSCHECK(), SCIP_DECL_CONSPRESOL(), SCIP_DECL_DIALOGEXEC(), SCIPconsBendersEnforceSolution(), and SCIPprintBendersStatistics().

◆ SCIPactivateBenders()

SCIP_RETCODE SCIPactivateBenders	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		int	nsubproblems
	)

activates the Benders' decomposition to be used for the current problem

This method should be called during the problem creation stage for all pricers that are necessary to solve the problem model.

Note: The Benders' decompositions are automatically deactivated when the problem is freed.

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

SCIP_STAGE_PROBLEM

Parameters

scip	SCIP data structure
benders	the Benders' decomposition structure
nsubproblems	the number of subproblems in the Benders' decomposition

Definition at line 598 of file scip_benders.c.

References FALSE, SCIP_CALL, SCIP_OKAY, SCIPbendersActivate(), SCIPcheckStage(), Scip::set, and TRUE.

Referenced by SCIPcreateBendersDefault().

◆ SCIPdeactivateBenders()

SCIP_RETCODE SCIPdeactivateBenders	(	SCIP *	scip,
		SCIP_BENDERS *	benders
	)

deactivates the Benders' decomposition

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

Parameters

scip	SCIP data structure
benders	the Benders' decomposition structure

Definition at line 620 of file scip_benders.c.

References FALSE, SCIP_CALL, SCIP_OKAY, SCIPbendersDeactivate(), SCIPcheckStage(), Scip::set, and TRUE.

◆ SCIPsetBendersPriority()

void SCIPsetBendersPriority	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		int	priority
	)

sets the priority of a Benders' decomposition

Parameters

scip	SCIP data structure
benders	Benders' decomposition
priority	new priority of the Benders' decomposition

Definition at line 633 of file scip_benders.c.

References NULL, SCIPbendersSetPriority(), and Scip::set.

Referenced by SCIP_DECL_PARAMCHGD().

◆ SCIPsolveBendersSubproblems()

SCIP_RETCODE SCIPsolveBendersSubproblems	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		SCIP_SOL *	sol,
		SCIP_RESULT *	result,
		SCIP_Bool *	infeasible,
		SCIP_Bool *	auxviol,
		SCIP_BENDERSENFOTYPE	type,
		SCIP_Bool	checkint
	)

calls the exec method of Benders' decomposition to solve the subproblems

The checkint flag indicates whether integer feasibility can be assumed. If it is not assumed, i.e. checkint == FALSE, then only the convex relaxations of the subproblems are solved. If integer feasibility is assumed, i.e. checkint == TRUE, then the convex relaxations and the full CIP are solved to generate Benders' cuts and check solution feasibility.

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

Parameters

scip	SCIP data structure
benders	Benders' decomposition
sol	primal CIP solution, can be NULL
result	result of the pricing process
infeasible	is the master problem infeasible with respect to the Benders' cuts?
auxviol	set to TRUE only if the solution is feasible but the aux vars are violated
type	the type of solution being enforced
checkint	should the integer solution be checked by the subproblems

Definition at line 665 of file scip_benders.c.

References FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPbendersExec(), SCIPcheckStage(), Scip::set, and TRUE.

Referenced by SCIP_DECL_CONSCHECK(), and SCIPconsBendersEnforceSolution().

◆ SCIPgetBendersMasterVar()

SCIP_RETCODE SCIPgetBendersMasterVar	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		SCIP_VAR *	var,
		SCIP_VAR **	mappedvar
	)

returns the master problem variable for the given subproblem variable

This function is used as part of the cut generation process.

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

Parameters

scip	SCIP data structure
benders	Benders' decomposition
var	the subproblem variable
mappedvar	pointer to store the master variable that var is mapped to

Definition at line 703 of file scip_benders.c.

References FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPbendersGetVar(), SCIPcheckStage(), Scip::set, and TRUE.

Referenced by computeStandardFeasibilityCut(), computeStandardOptimalityCut(), and SCIPbendersMergeSubproblemIntoMaster().

◆ SCIPgetBendersSubproblemVar()

SCIP_RETCODE SCIPgetBendersSubproblemVar	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		SCIP_VAR *	var,
		SCIP_VAR **	mappedvar,
		int	probnumber
	)

returns the subproblem problem variable for the given master variable

This function is used as part of the cut generation process.

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

Parameters

scip	SCIP data structure
benders	Benders' decomposition
var	the master variable
mappedvar	pointer to store the subproblem variable that var is mapped to
probnumber	the subproblem number

Definition at line 739 of file scip_benders.c.

References FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPbendersGetVar(), SCIPcheckStage(), SCIPgetBendersNSubproblems(), Scip::set, and TRUE.

Referenced by checkSubproblemIndependence(), and computeStandardIntegerOptCut().

◆ SCIPgetBendersNSubproblems()

int SCIPgetBendersNSubproblems	(	SCIP *	scip,
		SCIP_BENDERS *	benders
	)

returns the number of subproblems that are stored in the given Benders' decomposition

Returns: the number of subproblems in the Benders' decomposition

Parameters

scip	SCIP data structure
benders	Benders' decomposition

Definition at line 765 of file scip_benders.c.

References NULL, and SCIPbendersGetNSubproblems().

Referenced by SCIPcomputeBendersSubproblemLowerbound(), SCIPfreeBendersSubproblem(), SCIPgetBendersSubproblemVar(), SCIPmergeBendersSubproblemIntoMaster(), SCIPsetupBendersSubproblem(), and SCIPsolveBendersSubproblem().

◆ SCIPaddBendersSubproblem()

SCIP_RETCODE SCIPaddBendersSubproblem	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		SCIP *	subproblem
	)

registers the Benders' decomposition subproblem with the Benders' decomposition struct.

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

registers the Benders' decomposition subproblem with the Benders' decomposition struct

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

SCIP_STAGE_TRANSFORMED

Parameters

scip	SCIP data structure
benders	Benders' decomposition
subproblem	Benders' decomposition subproblem

Definition at line 784 of file scip_benders.c.

References FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPbendersAddSubproblem(), SCIPcheckStage(), and TRUE.

Referenced by SCIP_DECL_BENDERSCREATESUB().

◆ SCIPsetupBendersSubproblem()

SCIP_RETCODE SCIPsetupBendersSubproblem	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		SCIP_SOL *	sol,
		int	probnumber
	)

calls the generic subproblem setup method for a Benders' decomposition subproblem

This is called if the user requires to solve the Benders' decomposition subproblem separately from the main Benders' solving loop. This could be in the case of enhancement techniques.

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

calls the generic subproblem setup method for a Benders' decomposition subproblem

This is called if the user requires to solve the Benders' decomposition subproblem separately from the main Benders' solving loop. This could be in the case of enhancement techniques.

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

Parameters

scip	SCIP data structure
benders	the Benders' decomposition data structure
sol	primal solution used to setup the problem, NULL for LP solution
probnumber	the subproblem number

Definition at line 819 of file scip_benders.c.

References FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPbendersSetupSubproblem(), SCIPcheckStage(), SCIPgetBendersNSubproblems(), Scip::set, and TRUE.

Referenced by SCIP_DECL_DIALOGEXEC().

◆ SCIPsolveBendersSubproblem()

SCIP_RETCODE SCIPsolveBendersSubproblem	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		SCIP_SOL *	sol,
		int	probnumber,
		SCIP_Bool *	infeasible,
		SCIP_BENDERSENFOTYPE	type,
		SCIP_Bool	solvecip,
		SCIP_Real *	objective
	)

calls the solving method for a single Benders' decomposition subproblem

The method either calls the users solve subproblem method or calls the generic method. In the case of the generic method, the user must set up the subproblem prior to calling this method.

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

calls the solving method for a single Benders' decomposition subproblem

The method either calls the users solve subproblem method or calls the generic method. In the case of the generic method, the user must set up the subproblem prior to calling this method.

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

Parameters

scip	SCIP data structure
benders	Benders' decomposition
sol	primal CIP solution, can be NULL for the current LP/Pseudo solution
probnumber	the subproblem number
infeasible	returns whether the current subproblem is infeasible
type	the enforcement type calling this function
solvecip	directly solve the CIP subproblem
objective	the objective function value of the subproblem, can be NULL

Definition at line 856 of file scip_benders.c.

References FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPbendersSolveSubproblem(), SCIPcheckStage(), SCIPgetBendersNSubproblems(), Scip::set, and TRUE.

Referenced by SCIP_DECL_DIALOGEXEC().

◆ SCIPfreeBendersSubproblem()

SCIP_RETCODE SCIPfreeBendersSubproblem	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		int	probnumber
	)

frees the subproblem after calling the solve subproblem method

This will either call the user defined free subproblem callback for Benders' decomposition or the default freeing methods. In the default case, if the subproblem is an LP, then SCIPendProbing is called. If the subproblem is a MIP, then SCIPfreeTransform is called.

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

frees the subproblem after calling the solve subproblem method

This will either call the user defined free subproblem callback for Benders' decomposition or the default freeing methods. In the default case, if the subproblem is an LP, then SCIPendProbing is called. If the subproblem is a MIP, then SCIPfreeTransform is called.

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

Parameters

scip	SCIP data structure
benders	Benders' decomposition
probnumber	the subproblem number

Definition at line 900 of file scip_benders.c.

References FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPbendersFreeSubproblem(), SCIPcheckStage(), SCIPgetBendersNSubproblems(), Scip::set, and TRUE.

Referenced by SCIP_DECL_DIALOGEXEC().

◆ SCIPcheckBendersSubproblemOptimality()

SCIP_RETCODE SCIPcheckBendersSubproblemOptimality	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		SCIP_SOL *	sol,
		int	probnumber,
		SCIP_Bool *	optimal
	)

checks the optimality of a Benders' decomposition subproblem by comparing the objective function value against the value of the corresponding auxiliary variable

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

This method can be called if requested subproblem is in one of the following stages:

checks the optimality of a Benders' decomposition subproblem by comparing the objective function value against the value of the corresponding auxiliary variable

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

This method can be called if requested subproblem is in one of the following stages:

Parameters

scip	SCIP data structure
benders	the benders' decomposition structure
sol	primal CIP solution, can be NULL for the current LP solution
probnumber	the number of the pricing problem
optimal	flag to indicate whether the current subproblem is optimal for the master

Definition at line 934 of file scip_benders.c.

References FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPbendersCheckSubproblemOptimality(), SCIPbendersGetNSubproblems(), SCIPbendersSubproblem(), SCIPcheckStage(), Scip::set, and TRUE.

Referenced by generateAndApplyBendersCuts(), and generateAndApplyBendersIntegerCuts().

◆ SCIPgetBendersAuxiliaryVarVal()

SCIP_Real SCIPgetBendersAuxiliaryVarVal	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		SCIP_SOL *	sol,
		int	probnumber
	)

returns the value of the auxiliary variable for a given subproblem

Returns: the value of the auxiliary variable for the given subproblem

Parameters

scip	SCIP data structure
benders	the benders' decomposition structure
sol	primal CIP solution, can be NULL for the current LP solution
probnumber	the number of the pricing problem

Definition at line 960 of file scip_benders.c.

References NULL, SCIPbendersGetAuxiliaryVarVal(), SCIPbendersGetNSubproblems(), and Scip::set.

◆ SCIPcomputeBendersSubproblemLowerbound()

SCIP_RETCODE SCIPcomputeBendersSubproblemLowerbound	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		int	probnumber,
		SCIP_Real *	lowerbound,
		SCIP_Bool *	infeasible
	)

solves an independent subproblem to identify its lower bound and updates the lower bound of the corresponding auxiliary variable

Precondition

This method can be called if SCIP is in one of the following stages:

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Parameters

scip	the SCIP data structure
benders	Benders' decomposition
probnumber	the subproblem to be evaluated
lowerbound	the lowerbound for the subproblem
infeasible	was the subproblem found to be infeasible?

Definition at line 988 of file scip_benders.c.

References FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPbendersComputeSubproblemLowerbound(), SCIPcheckStage(), SCIPgetBendersNSubproblems(), Scip::set, and TRUE.

Referenced by SCIP_DECL_CONSPRESOL().

◆ SCIPmergeBendersSubproblemIntoMaster()

SCIP_RETCODE SCIPmergeBendersSubproblemIntoMaster	(	SCIP *	scip,
		SCIP_BENDERS *	benders,
		SCIP_HASHMAP *	varmap,
		SCIP_HASHMAP *	consmap,
		int	probnumber
	)

merges a subproblem into the master problem.

This process just adds a copy of the subproblem variables and constraints to the master problem, but keeps the subproblem stored in the Benders' decomposition data structure. The reason for keeping the subproblem available is for when it is queried for solutions after the problem is solved.

Once the subproblem is merged into the master problem, then the subproblem is flagged as disabled. This means that it will not be solved in the subsequent subproblem solving loops.

The associated auxiliary variables are kept in the master problem. The objective function of the merged subproblem is added as an underestimator constraint.

Precondition

This method can be called if SCIP is in one of the following stages:

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Merges a subproblem into the master problem. This process just adds a copy of the subproblem variables and constraints to the master problem, but keeps the subproblem stored in the Benders' decomposition data structure. The reason for keeping the subproblem available is for when it is queried for solutions after the problem is solved.

Once the subproblem is merged into the master problem, then the subproblem is flagged as disabled. This means that it will not be solved in the subsequent subproblem solving loops.

The associated auxiliary variables are kept in the master problem. The objective function of the merged subproblem is added as an underestimator constraint.

Precondition

This method can be called if SCIP is in one of the following stages:

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Parameters

scip	the SCIP data structure
benders	Benders' decomposition
varmap	a hashmap to store the mapping of subproblem variables corresponding to the newly created master variables, or NULL
consmap	a hashmap to store the mapping of subproblem constraints to the corresponding newly created constraints, or NULL
probnumber	the number of the subproblem that will be merged into the master problem

Definition at line 1028 of file scip_benders.c.

References FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPbendersMergeSubproblemIntoMaster(), SCIPcheckStage(), SCIPgetBendersNSubproblems(), Scip::set, and TRUE.

SCIP

Detailed Description

Functions

Function Documentation

◆ SCIP_DECL_SORTPTRCOMP() [1/2]

◆ SCIP_DECL_SORTPTRCOMP() [2/2]

◆ SCIPbendersGetData()

◆ SCIPbendersSetData()

◆ SCIPbendersGetName()

◆ SCIPbendersGetDesc()

◆ SCIPbendersGetPriority()

◆ SCIPbendersGetNSubproblems()

◆ SCIPbendersSubproblem()

◆ SCIPbendersGetNCalls()

◆ SCIPbendersGetNCutsFound()

◆ SCIPbendersGetSetupTime()

◆ SCIPbendersGetTime()

◆ SCIPbendersIsInitialized()

◆ SCIPbendersIsActive()

◆ SCIPbendersOnlyCheckConvexRelax()

◆ SCIPbendersCutLP()

◆ SCIPbendersCutPseudo()

◆ SCIPbendersCutRelaxation()

◆ SCIPbendersShareAuxVars()

◆ SCIPbendersGetAuxiliaryVar()

◆ SCIPbendersGetAuxiliaryVars()

◆ SCIPbendersSetSubproblemObjval()

◆ SCIPbendersGetSubproblemObjval()

◆ SCIPfindBenderscut()

◆ SCIPbendersGetBenderscuts()

◆ SCIPbendersGetNBenderscuts()

◆ SCIPbendersSetBenderscutPriority()

◆ SCIPbendersSetSubproblemIsConvex()

◆ SCIPbendersSubproblemIsConvex()

◆ SCIPbendersGetNConvexSubproblems()

◆ SCIPbendersSolveSubproblemLP()

◆ SCIPbendersSolveSubproblemCIP()

◆ SCIPbendersGetNTransferredCuts()

◆ SCIPbendersUpdateSubproblemLowerbound()

◆ SCIPbendersGetSubproblemLowerbound()

◆ SCIPbendersSetSubproblemIsIndependent()

◆ SCIPbendersSubproblemIsIndependent()

◆ SCIPbendersSubproblemIsEnabled()

◆ SCIPincludeBenders()

◆ SCIPincludeBendersBasic()

◆ SCIPsetBendersCopy()

◆ SCIPsetBendersFree()

◆ SCIPsetBendersInit()

◆ SCIPsetBendersExit()

◆ SCIPsetBendersInitpre()

◆ SCIPsetBendersExitpre()

◆ SCIPsetBendersInitsol()

◆ SCIPsetBendersExitsol()

◆ SCIPsetBendersPresubsolve()

◆ SCIPsetBendersSolveAndFreesub()

◆ SCIPsetBendersPostsolve()

◆ SCIPfindBenders()

◆ SCIPgetBenders()

◆ SCIPgetNBenders()

◆ SCIPgetNActiveBenders()

◆ SCIPactivateBenders()

◆ SCIPdeactivateBenders()

◆ SCIPsetBendersPriority()

◆ SCIPsolveBendersSubproblems()

◆ SCIPgetBendersMasterVar()

◆ SCIPgetBendersSubproblemVar()

◆ SCIPgetBendersNSubproblems()

◆ SCIPaddBendersSubproblem()

◆ SCIPsetupBendersSubproblem()

◆ SCIPsolveBendersSubproblem()

◆ SCIPfreeBendersSubproblem()

◆ SCIPcheckBendersSubproblemOptimality()

◆ SCIPgetBendersAuxiliaryVarVal()

◆ SCIPcomputeBendersSubproblemLowerbound()

◆ SCIPmergeBendersSubproblemIntoMaster()