Detailed Description

methods to copy problems between a source and a target SCIP

Functions
SCIP_EXPORT SCIP_RETCODE	SCIPcopyPlugins (SCIP sourcescip, SCIP targetscip, SCIP_Bool copyreaders, SCIP_Bool copypricers, SCIP_Bool copyconshdlrs, SCIP_Bool copyconflicthdlrs, SCIP_Bool copypresolvers, SCIP_Bool copyrelaxators, SCIP_Bool copyseparators, SCIP_Bool copypropagators, SCIP_Bool copyheuristics, SCIP_Bool copyeventhdlrs, SCIP_Bool copynodeselectors, SCIP_Bool copybranchrules, SCIP_Bool copydisplays, SCIP_Bool copydialogs, SCIP_Bool copytables, SCIP_Bool copynlpis, SCIP_Bool passmessagehdlr, SCIP_Bool *valid)

SCIP_EXPORT SCIP_RETCODE	SCIPcopyBenders (SCIP sourcescip, SCIP targetscip, SCIP_HASHMAP varmap, SCIP_Bool threadsafe, SCIP_Bool valid)

SCIP_EXPORT SCIP_RETCODE	SCIPcopyProb (SCIP sourcescip, SCIP targetscip, SCIP_HASHMAP varmap, SCIP_HASHMAP consmap, SCIP_Bool global, const char *name)

SCIP_EXPORT SCIP_RETCODE	SCIPcopyOrigProb (SCIP sourcescip, SCIP targetscip, SCIP_HASHMAP varmap, SCIP_HASHMAP consmap, const char *name)

SCIP_EXPORT SCIP_RETCODE	SCIPenableConsCompression (SCIP *scip)

SCIP_EXPORT SCIP_Bool	SCIPisConsCompressionEnabled (SCIP *scip)

SCIP_EXPORT SCIP_RETCODE	SCIPgetVarCopy (SCIP sourcescip, SCIP targetscip, SCIP_VAR sourcevar, SCIP_VAR targetvar, SCIP_HASHMAP varmap, SCIP_HASHMAP consmap, SCIP_Bool global, SCIP_Bool success)

SCIP_EXPORT SCIP_RETCODE	SCIPcopyVars (SCIP sourcescip, SCIP targetscip, SCIP_HASHMAP varmap, SCIP_HASHMAP consmap, SCIP_VAR *fixedvars, SCIP_Real fixedvals, int nfixedvars, SCIP_Bool global)

SCIP_EXPORT SCIP_RETCODE	SCIPcopyOrigVars (SCIP sourcescip, SCIP targetscip, SCIP_HASHMAP varmap, SCIP_HASHMAP consmap, SCIP_VAR *fixedvars, SCIP_Real fixedvals, int nfixedvars)

SCIP_EXPORT SCIP_RETCODE	SCIPmergeVariableStatistics (SCIP sourcescip, SCIP targetscip, SCIP_VAR sourcevars, SCIP_VAR targetvars, int nvars)

SCIP_EXPORT SCIP_RETCODE	SCIPtranslateSubSol (SCIP scip, SCIP subscip, SCIP_SOL subsol, SCIP_HEUR heur, SCIP_VAR subvars, SCIP_SOL newsol)

SCIP_EXPORT SCIP_RETCODE	SCIPtranslateSubSols (SCIP scip, SCIP subscip, SCIP_HEUR heur, SCIP_VAR subvars, SCIP_Bool success, int *solindex)

SCIP_EXPORT SCIP_RETCODE	SCIPgetConsCopy (SCIP sourcescip, SCIP targetscip, SCIP_CONS sourcecons, SCIP_CONS targetcons, SCIP_CONSHDLR sourceconshdlr, SCIP_HASHMAP varmap, SCIP_HASHMAP consmap, const char name, SCIP_Bool initial, SCIP_Bool separate, SCIP_Bool enforce, SCIP_Bool check, SCIP_Bool propagate, SCIP_Bool local, SCIP_Bool modifiable, SCIP_Bool dynamic, SCIP_Bool removable, SCIP_Bool stickingatnode, SCIP_Bool global, SCIP_Bool valid)

SCIP_EXPORT SCIP_RETCODE	SCIPcopyConss (SCIP sourcescip, SCIP targetscip, SCIP_HASHMAP varmap, SCIP_HASHMAP consmap, SCIP_Bool global, SCIP_Bool enablepricing, SCIP_Bool *valid)

SCIP_EXPORT SCIP_RETCODE	SCIPcopyOrigConss (SCIP sourcescip, SCIP targetscip, SCIP_HASHMAP varmap, SCIP_HASHMAP consmap, SCIP_Bool enablepricing, SCIP_Bool *valid)

SCIP_EXPORT SCIP_RETCODE	SCIPconvertCutsToConss (SCIP scip, SCIP_HASHMAP varmap, SCIP_HASHMAP consmap, SCIP_Bool global, int ncutsadded)

SCIP_EXPORT SCIP_RETCODE	SCIPcopyCuts (SCIP sourcescip, SCIP targetscip, SCIP_HASHMAP varmap, SCIP_HASHMAP consmap, SCIP_Bool global, int *ncutsadded)

SCIP_EXPORT SCIP_RETCODE	SCIPcopyConflicts (SCIP sourcescip, SCIP targetscip, SCIP_HASHMAP varmap, SCIP_HASHMAP consmap, SCIP_Bool global, SCIP_Bool enablepricing, SCIP_Bool *valid)

SCIP_EXPORT SCIP_RETCODE	SCIPcopyImplicationsCliques (SCIP sourcescip, SCIP targetscip, SCIP_HASHMAP varmap, SCIP_HASHMAP consmap, SCIP_Bool global, SCIP_Bool infeasible, int nbdchgs, int *ncopied)

SCIP_EXPORT SCIP_RETCODE	SCIPcopyParamSettings (SCIP sourcescip, SCIP targetscip)

SCIP_EXPORT int	SCIPgetSubscipDepth (SCIP *scip)

SCIP_EXPORT void	SCIPsetSubscipDepth (SCIP *scip, int newdepth)

SCIP_EXPORT SCIP_RETCODE	SCIPcopy (SCIP sourcescip, SCIP targetscip, SCIP_HASHMAP varmap, SCIP_HASHMAP consmap, const char suffix, SCIP_Bool global, SCIP_Bool enablepricing, SCIP_Bool threadsafe, SCIP_Bool passmessagehdlr, SCIP_Bool valid)

SCIP_EXPORT SCIP_RETCODE	SCIPcopyConsCompression (SCIP sourcescip, SCIP targetscip, SCIP_HASHMAP varmap, SCIP_HASHMAP consmap, const char suffix, SCIP_VAR fixedvars, SCIP_Real fixedvals, int nfixedvars, SCIP_Bool global, SCIP_Bool enablepricing, SCIP_Bool threadsafe, SCIP_Bool passmessagehdlr, SCIP_Bool *valid)

SCIP_EXPORT SCIP_RETCODE	SCIPcopyOrig (SCIP sourcescip, SCIP targetscip, SCIP_HASHMAP varmap, SCIP_HASHMAP consmap, const char suffix, SCIP_Bool enablepricing, SCIP_Bool threadsafe, SCIP_Bool passmessagehdlr, SCIP_Bool valid)

SCIP_EXPORT SCIP_RETCODE	SCIPcopyOrigConsCompression (SCIP sourcescip, SCIP targetscip, SCIP_HASHMAP varmap, SCIP_HASHMAP consmap, const char suffix, SCIP_VAR fixedvars, SCIP_Real fixedvals, int nfixedvars, SCIP_Bool enablepricing, SCIP_Bool threadsafe, SCIP_Bool passmessagehdlr, SCIP_Bool *valid)

SCIP_EXPORT SCIP_RETCODE	SCIPcheckCopyLimits (SCIP sourcescip, SCIP_Bool success)

SCIP_EXPORT SCIP_RETCODE	SCIPcopyLimits (SCIP sourcescip, SCIP targetscip)

SCIP_EXPORT SCIP_RETCODE	SCIPsetCommonSubscipParams (SCIP sourcescip, SCIP subscip, SCIP_Longint nsubnodes, SCIP_Longint nstallnodes, int bestsollimit)

Function Documentation

◆ SCIPcopyPlugins()

SCIP_EXPORT SCIP_RETCODE SCIPcopyPlugins	(	SCIP *	sourcescip,
		SCIP *	targetscip,
		SCIP_Bool	copyreaders,
		SCIP_Bool	copypricers,
		SCIP_Bool	copyconshdlrs,
		SCIP_Bool	copyconflicthdlrs,
		SCIP_Bool	copypresolvers,
		SCIP_Bool	copyrelaxators,
		SCIP_Bool	copyseparators,
		SCIP_Bool	copypropagators,
		SCIP_Bool	copyheuristics,
		SCIP_Bool	copyeventhdlrs,
		SCIP_Bool	copynodeselectors,
		SCIP_Bool	copybranchrules,
		SCIP_Bool	copydisplays,
		SCIP_Bool	copydialogs,
		SCIP_Bool	copytables,
		SCIP_Bool	copynlpis,
		SCIP_Bool	passmessagehdlr,
		SCIP_Bool *	valid
	)

copies plugins from sourcescip to targetscip; in case that a constraint handler which does not need constraints cannot be copied, valid will return FALSE. All plugins can declare that, if their copy process failed, the copied SCIP instance might not represent the same problem semantics as the original. Note that in this case dual reductions might be invalid.

Note: In a multi thread case, you need to lock the copying procedure from outside with a mutex. Also, 'passmessagehdlr' should be set to FALSE.; Do not change the source SCIP environment during the copying process.; This method does not copy Benders' plugins. To this end, the method SCIPcopyBenders() must be called separately.

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if sourcescip is in one of the following stages:

This method can be called if targetscip is in one of the following stages:

Postcondition

After calling this method targetscip reaches one of the following stages depending on if and when the solution process was interrupted:

SCIP_STAGE_PROBLEM

Note: sourcescip stage does not get changed

See SCIP_STAGE for a complete list of all possible solving stages.

copies plugins from sourcescip to targetscip; in case that a constraint handler which does not need constraints cannot be copied, valid will return FALSE. All plugins can declare that, if their copy process failed, the copied SCIP instance might not represent the same problem semantics as the original. Note that in this case dual reductions might be invalid.

Note: In a multi thread case, you need to lock the copying procedure from outside with a mutex. Also, 'passmessagehdlr' should be set to FALSE.; Do not change the source SCIP environment during the copying process; This method does not copy Benders' plugins. To this end, the method SCIPcopyBenders() must be called separately.

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if sourcescip is in one of the following stages:

This method can be called if targetscip is in one of the following stages:

Postcondition

After calling this method targetscip reaches one of the following stages depending on if and when the solution process was interrupted:

SCIP_STAGE_PROBLEM

Note: sourcescip stage does not get changed

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

sourcescip	source SCIP data structure
targetscip	target SCIP data structure
copyreaders	should the file readers be copied
copypricers	should the variable pricers be copied
copyconshdlrs	should the constraint handlers be copied
copyconflicthdlrs	should the conflict handlers be copied
copypresolvers	should the presolvers be copied
copyrelaxators	should the relaxation handlers be copied
copyseparators	should the separators be copied
copypropagators	should the propagators be copied
copyheuristics	should the heuristics be copied
copyeventhdlrs	should the event handlers be copied
copynodeselectors	should the node selectors be copied
copybranchrules	should the branchrules be copied
copydisplays	should the display columns be copied
copydialogs	should the dialogs be copied
copytables	should the statistics tables be copied
copynlpis	should the NLPIs be copied
passmessagehdlr	should the message handler be passed
valid	pointer to store whether plugins, in particular all constraint handlers which do not need constraints were validly copied

Definition at line 265 of file scip_copy.c.

References FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPcheckStage(), SCIPgetMessagehdlr(), SCIPsetCopyPlugins(), SCIPsetMessagehdlr(), Scip::set, and TRUE.

Referenced by createSubscip(), createSubSCIP(), doCopy(), SCIPbendersApplyDecomposition(), and setupSubscipLpface().

◆ SCIPcopyBenders()

SCIP_EXPORT SCIP_RETCODE SCIPcopyBenders	(	SCIP *	sourcescip,
		SCIP *	targetscip,
		SCIP_HASHMAP *	varmap,
		SCIP_Bool	threadsafe,
		SCIP_Bool *	valid
	)

copies all Benders' decomposition plugins

Note: In a multi thread case, you need to lock the copying procedure from outside with a mutex.; the 'threadsafe' parameter must be set to TRUE if you are absolutely certain that the source and target SCIP instances will be solved in parallel. The usual case is to set this to FALSE, since thread safety typically incurs a performance cost.

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if sourcescip is in one of the following stages:

This method can be called if targetscip is in one of the following stages:

Postcondition

After calling this method targetscip reaches one of the following stages depending on if and when the solution process was interrupted:

SCIP_STAGE_PROBLEM

Note: sourcescip stage does not get changed

See SCIP_STAGE for a complete list of all possible solving stages.

copies all Benders' decomposition plugins

Note: In a multi thread case, you need to lock the copying procedure from outside with a mutex.; the 'threadsafe' parameter should only be set to TRUE if you are absolutely certain that the source and target SCIP instances will be solved in parallel. The usual case is to set this to FALSE, since thread safety typically incurs a performance cost.

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if sourcescip is in one of the following stages:

This method can be called if targetscip is in one of the following stages:

Postcondition

After calling this method targetscip reaches one of the following stages depending on if and when the solution process was interrupted:

SCIP_STAGE_PROBLEM

Note: sourcescip stage does not get changed

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

sourcescip	source SCIP data structure
targetscip	target SCIP data structure
varmap	a hashmap to store the mapping of source variables corresponding target variables; if NULL the transfer of cuts is not possible
threadsafe	FALSE, if data can be safely shared between the source and target SCIP, otherwise TRUE. This is usually set to FALSE
valid	pointer to store whether all plugins were validly copied

Definition at line 345 of file scip_copy.c.

References SCIP_Set::benders, FALSE, SCIP_Set::nbenders, NULL, SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIPbendersCopyInclude(), SCIPcheckStage(), Scip::set, and TRUE.

Referenced by doCopy().

◆ SCIPcopyProb()

SCIP_EXPORT SCIP_RETCODE SCIPcopyProb	(	SCIP *	sourcescip,
		SCIP *	targetscip,
		SCIP_HASHMAP *	varmap,
		SCIP_HASHMAP *	consmap,
		SCIP_Bool	global,
		const char *	name
	)

create a problem by copying the problem data of the source SCIP

Note: In a multi thread case, you need to lock the copying procedure from outside with a mutex.; Do not change the source SCIP environment during the copying process

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if sourcescip is in one of the following stages:

This method can be called if targetscip is in one of the following stages:

Postcondition

After calling this method targetscip reaches one of the following stages depending on if and when the solution process was interrupted:

SCIP_STAGE_PROBLEM

Note: sourcescip stage does not get changed

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

sourcescip	source SCIP data structure
targetscip	target SCIP data structure
varmap	a hashmap to store the mapping of source variables corresponding target variables, or NULL
consmap	a hashmap to store the mapping of source constraints to the corresponding target constraints, or NULL
global	create a global or a local copy?
name	problem name of target

Definition at line 513 of file scip_copy.c.

References copyProb(), FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPcheckStage(), and TRUE.

Referenced by copyToSubscip(), createSubSCIP(), and doCopy().

◆ SCIPcopyOrigProb()

SCIP_EXPORT SCIP_RETCODE SCIPcopyOrigProb	(	SCIP *	sourcescip,
		SCIP *	targetscip,
		SCIP_HASHMAP *	varmap,
		SCIP_HASHMAP *	consmap,
		const char *	name
	)

create a problem by copying the original problem data of the source SCIP

Note: In a multi thread case, you need to lock the copying procedure from outside with a mutex.; Do not change the source SCIP environment during the copying process

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if sourcescip is in one of the following stages:

This method can be called if targetscip is in one of the following stages:

Postcondition

After calling this method targetscip reaches one of the following stages depending on if and when the solution process was interrupted:

SCIP_STAGE_PROBLEM

Note: sourcescip stage does not get changed

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

sourcescip	source SCIP data structure
targetscip	target SCIP data structure
varmap	a hashmap to store the mapping of source variables corresponding target variables, or NULL
consmap	a hashmap to store the mapping of source constraints to the corresponding target constraints, or NULL
name	problem name of target

Definition at line 566 of file scip_copy.c.

References copyProb(), FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPaddOrigObjoffset(), SCIPcheckStage(), SCIPgetObjsense(), SCIPgetOrigObjoffset(), SCIPsetObjsense(), and TRUE.

Referenced by doCopy().

◆ SCIPenableConsCompression()

SCIP_EXPORT SCIP_RETCODE SCIPenableConsCompression ( SCIP * scip )

enables constraint compression.

If constraint compression is enabled, fixed variables will be treated as constants by all constraints that are copied after calling this method.

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if scip is in one of the following stages:

SCIP_STAGE_PROBLEM

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

scip	source SCIP data structure

Definition at line 607 of file scip_copy.c.

References FALSE, NULL, Scip::origprob, SCIP_CALL, SCIP_OKAY, SCIPcheckStage(), SCIPprobEnableConsCompression(), and TRUE.

Referenced by doCopy().

◆ SCIPisConsCompressionEnabled()

SCIP_EXPORT SCIP_Bool SCIPisConsCompressionEnabled ( SCIP * scip )

is constraint compression enabled?

If constraint compression is enabled, fixed variables can be treated as constants by all constraints that are copied after calling this method.

Returns: TRUE if problem constraint compression is enabled, otherwise FALSE

Precondition

This method can be called if scip is in one of the following stages:

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

scip	source SCIP data structure

Definition at line 646 of file scip_copy.c.

References FALSE, NULL, Scip::origprob, SCIP_CALL_ABORT, SCIP_STAGE_PROBLEM, SCIPcheckStage(), SCIPgetStage(), SCIPprobIsConsCompressionEnabled(), and TRUE.

Referenced by consdataCreate(), consdataCreateRedundant(), and copyConsPseudoboolean().

◆ SCIPgetVarCopy()

SCIP_EXPORT SCIP_RETCODE SCIPgetVarCopy	(	SCIP *	sourcescip,
		SCIP *	targetscip,
		SCIP_VAR *	sourcevar,
		SCIP_VAR **	targetvar,
		SCIP_HASHMAP *	varmap,
		SCIP_HASHMAP *	consmap,
		SCIP_Bool	global,
		SCIP_Bool *	success
	)

returns copy of the source variable; if there already is a copy of the source variable in the variable hash map, it is just returned as target variable; otherwise, if the variables it not marked as relaxation-only, a new variable will be created and added to the target SCIP; this created variable is added to the variable hash map and returned as target variable; relaxation-only variables are not copied and FALSE is returned in *success

Note: In a multi thread case, you need to lock the copying procedure from outside with a mutex.; Do not change the source SCIP environment during the copying process; if a new variable was created, this variable will be added to the target-SCIP, but it is not captured

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if sourcescip is in one of the following stages:

This method can be called if targetscip is in one of the following stages:

Note: targetscip stage does not get changed; sourcescip stage does not get changed

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

sourcescip	source SCIP data structure
targetscip	target SCIP data structure
sourcevar	source variable
targetvar	pointer to store the target variable
varmap	a hashmap to store the mapping of source variables to the corresponding target variables, or NULL
consmap	a hashmap to store the mapping of source constraints to the corresponding target constraints, or NULL
global	should global or local bounds be used?
success	pointer to store whether the copying was successful or not

Definition at line 697 of file scip_copy.c.

References FALSE, Scip::mem, NULL, SCIP_Mem::probmem, SCIP_Var::scip, SCIP_Bool, SCIP_CALL, SCIP_ERROR, SCIP_MAXSTRLEN, SCIP_OKAY, SCIP_Real, SCIP_STAGE_PROBLEM, SCIP_VARSTATUS_AGGREGATED, SCIP_VARSTATUS_COLUMN, SCIP_VARSTATUS_FIXED, SCIP_VARSTATUS_LOOSE, SCIP_VARSTATUS_MULTAGGR, SCIP_VARSTATUS_NEGATED, SCIP_VARSTATUS_ORIGINAL, SCIPABORT, SCIPaddCoefLinear(), SCIPaddCons(), SCIPaddVar(), SCIPallocBufferArray, SCIPblkmem(), SCIPcheckStage(), SCIPcreateConsLinear(), SCIPerrorMessage, SCIPflattenVarAggregationGraph(), SCIPfreeBufferArray, SCIPgetNConss(), SCIPgetNegatedVar(), SCIPgetNVars(), SCIPgetStage(), SCIPgetVarCopy(), SCIPhashmapCreate(), SCIPhashmapFree(), SCIPhashmapGetImage(), SCIPreleaseCons(), SCIPreleaseVar(), SCIPsnprintf(), SCIPvarCopy(), SCIPvarGetAggrConstant(), SCIPvarGetAggrScalar(), SCIPvarGetAggrVar(), SCIPvarGetMultaggrConstant(), SCIPvarGetMultaggrNVars(), SCIPvarGetMultaggrScalars(), SCIPvarGetMultaggrVars(), SCIPvarGetName(), SCIPvarGetNegationVar(), SCIPvarGetStatus(), SCIPvarIsRelaxationOnly(), Scip::set, Scip::stat, and TRUE.

Referenced by copyConsPseudoboolean(), copyCuts(), copyToSubscip(), copyVars(), tsp::ProbDataTSP::scip_copy(), SCIP_DECL_CONSCOPY(), SCIP_DECL_PROBCOPY(), SCIPcopyConsLinear(), SCIPcopyImplicationsCliques(), and SCIPgetVarCopy().

◆ SCIPcopyVars()

SCIP_EXPORT SCIP_RETCODE SCIPcopyVars	(	SCIP *	sourcescip,
		SCIP *	targetscip,
		SCIP_HASHMAP *	varmap,
		SCIP_HASHMAP *	consmap,
		SCIP_VAR **	fixedvars,
		SCIP_Real *	fixedvals,
		int	nfixedvars,
		SCIP_Bool	global
	)

Copies all active (thus unfixed) variables from source-SCIP, except those that are marked as relaxation only, and adds these variable to the target-SCIP.

The mapping between these variables are stored in the variable hashmap.

The target-SCIP has to be in problem creation stage.

Note: the variables are added to the target-SCIP but not captured; In a multi thread case, you need to lock the copying procedure from outside with a mutex.; Do not change the source SCIP environment during the copying process

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if sourcescip is in one of the following stages:

This method can be called if targetscip is in one of the following stages:

SCIP_STAGE_PROBLEM

Note: sourcescip stage does not get changed; targetscip stage does not get changed

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

sourcescip	source SCIP data structure
targetscip	target SCIP data structure
varmap	a hashmap to store the mapping of source variables to the corresponding target variables, or NULL
consmap	a hashmap to store the mapping of source constraints to the corresponding target constraints, or NULL
fixedvars	source variables whose copies should be fixed in the target SCIP environment, or NULL
fixedvals	array of fixing values for target SCIP variables, or NULL
nfixedvars	number of source variables whose copies should be fixed in the target SCIP environment, or NULL
global	should global or local bounds be used?

Definition at line 1164 of file scip_copy.c.

References copyVars(), FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPcheckStage(), and TRUE.

Referenced by createSubSCIP(), SCIPcopyLargeNeighborhoodSearch(), and setupSubscipLpface().

◆ SCIPcopyOrigVars()

SCIP_EXPORT SCIP_RETCODE SCIPcopyOrigVars	(	SCIP *	sourcescip,
		SCIP *	targetscip,
		SCIP_HASHMAP *	varmap,
		SCIP_HASHMAP *	consmap,
		SCIP_VAR **	fixedvars,
		SCIP_Real *	fixedvals,
		int	nfixedvars
	)

copies all original variables from source-SCIP and adds these variable to the target-SCIP; the mapping between these variables are stored in the variable hashmap, target-SCIP has to be in problem creation stage, fixed and aggregated variables do not get copied

Note: the variables are added to the target-SCIP but not captured; In a multi thread case, you need to lock the copying procedure from outside with a mutex.; Do not change the source SCIP environment during the copying process

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if sourcescip is in one of the following stages:

This method can be called if targetscip is in one of the following stages:

SCIP_STAGE_PROBLEM

Note: sourcescip stage does not get changed; targetscip stage does not get changed

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

sourcescip	source SCIP data structure
targetscip	target SCIP data structure
varmap	a hashmap to store the mapping of source variables to the corresponding target variables, or NULL
consmap	a hashmap to store the mapping of source constraints to the corresponding target constraints, or NULL
fixedvars	source variables whose copies should be fixed in the target SCIP environment, or NULL
fixedvals	array of fixing values for target SCIP variables, or NULL
nfixedvars	number of source variables whose copies should be fixed in the target SCIP environment, or NULL

Definition at line 1221 of file scip_copy.c.

References copyVars(), FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIPcheckStage(), and TRUE.

◆ SCIPmergeVariableStatistics()

SCIP_EXPORT SCIP_RETCODE SCIPmergeVariableStatistics	(	SCIP *	sourcescip,
		SCIP *	targetscip,
		SCIP_VAR **	sourcevars,
		SCIP_VAR **	targetvars,
		int	nvars
	)

merges the histories of variables from a source SCIP into a target SCIP. The two data structures should point to different SCIP instances.

Note: the notion of source and target is inverted here; sourcescip usually denotes a copied SCIP instance, whereas targetscip denotes the original instance

Parameters

sourcescip	source SCIP data structure
targetscip	target SCIP data structure
sourcevars	source variables for history merge, NULL entries are ignored
targetvars	target variables for history merge, NULL entries are ignored
nvars	number of variables in both variable arrays

Definition at line 1251 of file scip_copy.c.

References SCIP_Set::history_allowmerge, NULL, SCIP_OKAY, SCIP_STAGE_SOLVING, SCIP_VARSTATUS_COLUMN, SCIP_VARSTATUS_ORIGINAL, SCIPgetOrigObjoffset(), SCIPgetOrigObjscale(), SCIPgetStage(), SCIPsetIsEQ(), SCIPvarGetStatus(), SCIPvarGetTransVar(), SCIPvarMergeHistories(), Scip::set, and Scip::stat.

Referenced by setupAndSolveSubscip(), setupAndSolveSubscipCrossover(), setupAndSolveSubscipMutation(), solveSubproblem(), and wrapperRins().

◆ SCIPtranslateSubSol()

SCIP_EXPORT SCIP_RETCODE SCIPtranslateSubSol	(	SCIP *	scip,
		SCIP *	subscip,
		SCIP_SOL *	subsol,
		SCIP_HEUR *	heur,
		SCIP_VAR **	subvars,
		SCIP_SOL **	newsol
	)

translates a solution from a subscip to the main scip

Variables that are relaxation-only in the master SCIP are set to 0 or the bound closest to 0. Such variables are represented as NULL entry in the subvars array.

Note: This method allocates a new solution of the main scip that needs to be freed by the user.

Parameters

scip	SCIP data structure of the original problem
subscip	SCIP data structure of the subproblem
subsol	solution of the subproblem
heur	heuristic that found the solution
subvars	the variables from the subproblem in the same order as the main `scip`
newsol	buffer to store pointer to created solution in main SCIP

Definition at line 1356 of file scip_copy.c.

References NULL, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIPallocBufferArray, SCIPcreateSol(), SCIPfreeBufferArray, SCIPgetVarsData(), SCIPsetSolVals(), and translateSubSol().

Referenced by createNewSol(), setupAndSolve(), setupAndSolveSubscip(), setupAndSolveSubscipRapidlearning(), solveSubproblem(), and transferSolution().

◆ SCIPtranslateSubSols()

SCIP_EXPORT SCIP_RETCODE SCIPtranslateSubSols	(	SCIP *	scip,
		SCIP *	subscip,
		SCIP_HEUR *	heur,
		SCIP_VAR **	subvars,
		SCIP_Bool *	success,
		int *	solindex
	)

checks the solutions from the subscip and adds the first one that is found feasible to the master SCIP

Variables that are relaxation-only in the master SCIP are set to 0 or the bound closest to 0. Such variables are represented as NULL entry in the subvars array.

Parameters

scip	the SCIP data structure
subscip	SCIP data structure of the subproblem
heur	heuristic that found the solution
subvars	the variables from the subproblem in the same order as the main `scip`
success	pointer to store, whether new solution was found
solindex	pointer to store solution index of stored solution, or NULL if not of interest

Definition at line 1396 of file scip_copy.c.

References FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIPaddSolFree(), SCIPallocBufferArray, SCIPcheckSol(), SCIPcreateSol(), SCIPdebugMsg, SCIPfreeBufferArray, SCIPfreeSol(), SCIPgetNSols(), SCIPgetSolOrigObj(), SCIPgetSols(), SCIPgetVarsData(), SCIPisInfinity(), SCIPsetSolVals(), SCIPsolGetIndex(), translateSubSol(), and TRUE.

Referenced by createNewSols(), SCIP_DECL_HEUREXEC(), setupAndSolveSubscip(), setupAndSolveSubscipCrossover(), setupAndSolveSubscipLocalbranching(), setupAndSolveSubscipMutation(), setupAndSolveSubscipOneopt(), setupAndSolveSubscipTrustregion(), solveSubscipLpface(), wrapperDins(), and wrapperRins().

◆ SCIPgetConsCopy()

SCIP_EXPORT SCIP_RETCODE SCIPgetConsCopy	(	SCIP *	sourcescip,
		SCIP *	targetscip,
		SCIP_CONS *	sourcecons,
		SCIP_CONS **	targetcons,
		SCIP_CONSHDLR *	sourceconshdlr,
		SCIP_HASHMAP *	varmap,
		SCIP_HASHMAP *	consmap,
		const char *	name,
		SCIP_Bool	initial,
		SCIP_Bool	separate,
		SCIP_Bool	enforce,
		SCIP_Bool	check,
		SCIP_Bool	propagate,
		SCIP_Bool	local,
		SCIP_Bool	modifiable,
		SCIP_Bool	dynamic,
		SCIP_Bool	removable,
		SCIP_Bool	stickingatnode,
		SCIP_Bool	global,
		SCIP_Bool *	valid
	)

returns copy of the source constraint; if there already is a copy of the source constraint in the constraint hash map, it is just returned as target constraint; elsewise a new constraint will be created; this created constraint is added to the constraint hash map and returned as target constraint; the variable map is used to map the variables of the source SCIP to the variables of the target SCIP

Warning: If a constraint is marked to be checked for feasibility but not to be enforced, a LP or pseudo solution may be declared feasible even if it violates this particular constraint. This constellation should only be used, if no LP or pseudo solution can violate the constraint – e.g. if a local constraint is redundant due to the variable's local bounds.

Note: The constraint is not added to the target SCIP. You can check whether a constraint is added by calling SCIPconsIsAdded(). (If you mix SCIPgetConsCopy() with SCIPcopyConss() you should pay attention to what you add explicitly and what is already added.); The constraint is always captured, either during the creation of the copy or after finding the copy of the constraint in the constraint hash map; In a multi thread case, you need to lock the copying procedure from outside with a mutex.; Do not change the source SCIP environment during the copying process

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if sourcescip is in one of the following stages:

This method can be called if targetscip is in one of the following stages:

Note: sourcescip stage does not get changed; targetscip stage does not get changed

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

sourcescip	source SCIP data structure
targetscip	target SCIP data structure
sourcecons	source constraint of the source SCIP
targetcons	pointer to store the created target constraint
sourceconshdlr	source constraint handler for this constraint
varmap	a SCIP_HASHMAP mapping variables of the source SCIP to the corresponding variables of the target SCIP, or NULL
consmap	a hashmap to store the mapping of source constraints to the corresponding target constraints, or NULL
name	name of constraint, or NULL if the name of the source constraint should be used
initial	should the LP relaxation of constraint be in the initial LP?
separate	should the constraint be separated during LP processing?
enforce	should the constraint be enforced during node processing?
check	should the constraint be checked for feasibility?
propagate	should the constraint be propagated during node processing?
local	is constraint only valid locally?
modifiable	is constraint modifiable (subject to column generation)?
dynamic	is constraint subject to aging?
removable	should the relaxation be removed from the LP due to aging or cleanup?
stickingatnode	should the constraint always be kept at the node where it was added, even if it may be moved to a more global node?
global	create a global or a local copy?
valid	pointer to store whether the copying was valid or not

Definition at line 1534 of file scip_copy.c.

References FALSE, NULL, SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIPblkmem(), SCIPcaptureCons(), SCIPcheckStage(), SCIPconsCopy(), SCIPgetNConss(), SCIPgetNVars(), SCIPhashmapCreate(), SCIPhashmapFree(), SCIPhashmapGetImage(), SCIPhashmapInsert(), Scip::set, and TRUE.

Referenced by addConstraintToBendersSubproblem(), addScenarioConsToProb(), copyConsPseudoboolean(), copyToSubscip(), SCIP_DECL_CONSCOPY(), SCIP_DECL_PROBCOPY(), SCIPbendersMergeSubproblemIntoMaster(), SCIPcopyConflicts(), SCIPcopyConss(), SCIPcopyOrigConss(), and setupAndSolveSubscipRapidlearning().

◆ SCIPcopyConss()

SCIP_EXPORT SCIP_RETCODE SCIPcopyConss	(	SCIP *	sourcescip,
		SCIP *	targetscip,
		SCIP_HASHMAP *	varmap,
		SCIP_HASHMAP *	consmap,
		SCIP_Bool	global,
		SCIP_Bool	enablepricing,
		SCIP_Bool *	valid
	)

copies constraints from the source-SCIP and adds these to the target-SCIP; for mapping the variables between the source and the target SCIP a hash map can be given; if the variable hash map is NULL or necessary variable mapping is missing, the required variables are created in the target-SCIP and added to the hash map, if not NULL; all variables which are created are added to the target-SCIP but not (user) captured; if the constraint hash map is not NULL the mapping between the constraints of the source and target-SCIP is stored

*valid is set to TRUE iff all constraints that are marked as checked or enforced were copied successfully. If other constraints could not be copied, *valid can still be set to TRUE.

Note: the constraints are added to the target-SCIP but are not (user) captured in the target SCIP. (If you mix SCIPgetConsCopy() with SCIPcopyConss() you should pay attention to what you add explicitly and what is already added.) You can check whether a constraint is added by calling SCIPconsIsAdded().; In a multi thread case, you need to lock the copying procedure from outside with a mutex.; Do not change the source SCIP environment during the copying process

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if sourcescip is in one of the following stages:

This method can be called if targetscip is in one of the following stages:

SCIP_STAGE_PROBLEM

Note: sourcescip stage does not get changed; targetscip stage does not get changed

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

sourcescip	source SCIP data structure
targetscip	target SCIP data structure
varmap	a SCIP_HASHMAP mapping variables of the source SCIP to the corresponding variables of the target SCIP, or NULL
consmap	a hashmap to store the mapping of source constraints to the corresponding target constraints, or NULL
global	create a global or a local copy?
enablepricing	should pricing be enabled in copied SCIP instance? If TRUE, the modifiable flag of constraints will be copied.
valid	pointer to store whether all checked or enforced constraints were validly copied

Definition at line 1673 of file scip_copy.c.

References Scip::conflictstore, FALSE, Scip::mem, NULL, SCIP_Mem::probmem, Scip::reopt, SCIP_Bool, SCIP_CALL, SCIP_CONFTYPE_UNKNOWN, SCIP_OKAY, SCIPaddCons(), SCIPblkmem(), SCIPcheckStage(), SCIPconflictstoreAddConflict(), SCIPconsGetName(), SCIPconshdlrGetCheckConss(), SCIPconshdlrGetConss(), SCIPconshdlrGetNActiveConss(), SCIPconshdlrGetName(), SCIPconshdlrGetNCheckConss(), SCIPconsIsActive(), SCIPconsIsChecked(), SCIPconsIsConflict(), SCIPconsIsDeleted(), SCIPconsIsDynamic(), SCIPconsIsEnforced(), SCIPconsIsInitial(), SCIPconsIsLocal(), SCIPconsIsModifiable(), SCIPconsIsPropagated(), SCIPconsIsRemovable(), SCIPconsIsSeparated(), SCIPconsSetModifiable(), SCIPdebugMsg, SCIPgetConsCopy(), SCIPgetConshdlrs(), SCIPgetNConshdlrs(), SCIPgetNConss(), SCIPgetNVars(), SCIPhashmapCreate(), SCIPhashmapFree(), SCIPinfinity(), SCIPreleaseCons(), Scip::set, Scip::stat, and TRUE.

Referenced by createSubSCIP(), and doCopy().

◆ SCIPcopyOrigConss()

SCIP_EXPORT SCIP_RETCODE SCIPcopyOrigConss	(	SCIP *	sourcescip,
		SCIP *	targetscip,
		SCIP_HASHMAP *	varmap,
		SCIP_HASHMAP *	consmap,
		SCIP_Bool	enablepricing,
		SCIP_Bool *	valid
	)

copies all original constraints from the source-SCIP and adds these to the target-SCIP; for mapping the variables between the source and the target SCIP a hash map can be given; if the variable hash map is NULL or necessary variable mapping is missing, the required variables are created in the target-SCIP and added to the hash map, if not NULL; all variables which are created are added to the target-SCIP but not (user) captured; if the constraint hash map is not NULL the mapping between the constraints of the source and target-SCIP is stored

Note: the constraints are added to the target-SCIP but are not (user) captured in the target SCIP. (If you mix SCIPgetConsCopy() with SCIPcopyConss() you should pay attention to what you add explicitly and what is already added.) You can check whether a constraint is added by calling SCIPconsIsAdded().; In a multi thread case, you need to lock the copying procedure from outside with a mutex.; Do not change the source SCIP environment during the copying process

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if sourcescip is in one of the following stages:

This method can be called if targetscip is in one of the following stages:

SCIP_STAGE_PROBLEM

Note: sourcescip stage does not get changed; targetscip stage does not get changed

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

sourcescip	source SCIP data structure
targetscip	target SCIP data structure
varmap	a SCIP_HASHMAP mapping variables of the source SCIP to the corresponding variables of the target SCIP, or NULL
consmap	a hashmap to store the mapping of source constraints to the corresponding target constraints, or NULL
enablepricing	should pricing be enabled in copied SCIP instance? If TRUE, the modifiable flag of constraints will be copied.
valid	pointer to store whether all constraints were validly copied

Definition at line 1878 of file scip_copy.c.

References FALSE, NULL, SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIPaddCons(), SCIPblkmem(), SCIPcheckStage(), SCIPconsGetHdlr(), SCIPconsGetName(), SCIPconsIsChecked(), SCIPconsIsDynamic(), SCIPconsIsEnforced(), SCIPconsIsInitial(), SCIPconsIsModifiable(), SCIPconsIsOriginal(), SCIPconsIsPropagated(), SCIPconsIsRemovable(), SCIPconsIsSeparated(), SCIPconsSetModifiable(), SCIPdebugMsg, SCIPgetConsCopy(), SCIPgetNConss(), SCIPgetNOrigConss(), SCIPgetNVars(), SCIPgetOrigConss(), SCIPhashmapCreate(), SCIPhashmapFree(), SCIPreleaseCons(), and TRUE.

Referenced by doCopy().

◆ SCIPconvertCutsToConss()

SCIP_EXPORT SCIP_RETCODE SCIPconvertCutsToConss	(	SCIP *	scip,
		SCIP_HASHMAP *	varmap,
		SCIP_HASHMAP *	consmap,
		SCIP_Bool	global,
		int *	ncutsadded
	)

convert all active cuts from cutpool to linear constraints

Note: Do not change the source SCIP environment during the copying process

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if SCIP is in one of the following stages:

Note: SCIP stage does not get changed

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

scip	SCIP data structure
varmap	a hashmap to store the mapping of source variables corresponding target variables, or NULL
consmap	a hashmap to store the mapping of source constraints to the corresponding target constraints, or NULL
global	create a global or a local copy?
ncutsadded	pointer to store number of added cuts, or NULL

Definition at line 2011 of file scip_copy.c.

References FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIP_STAGE_SOLVING, SCIPcheckStage(), SCIPcopyCuts(), Scip::set, SCIP_Set::stage, and TRUE.

Referenced by SCIP_DECL_CONSEXITSOL().

◆ SCIPcopyCuts()

SCIP_EXPORT SCIP_RETCODE SCIPcopyCuts	(	SCIP *	sourcescip,
		SCIP *	targetscip,
		SCIP_HASHMAP *	varmap,
		SCIP_HASHMAP *	consmap,
		SCIP_Bool	global,
		int *	ncutsadded
	)

copies all active cuts from cutpool of sourcescip to linear constraints in targetscip

Cuts that contain variables that are marked as relaxation-only are skipped.

Note: In a multi thread case, you need to lock the copying procedure from outside with a mutex.; Do not change the source SCIP environment during the copying process

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if sourcescip is in one of the following stages:

This method can be called if targetscip is in one of the following stages:

Note: sourcescip stage does not get changed; targetscip stage does not get changed

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

sourcescip	source SCIP data structure
targetscip	target SCIP data structure
varmap	a hashmap to store the mapping of source variables corresponding target variables, or NULL
consmap	a hashmap to store the mapping of source constraints to the corresponding target constraints, or NULL
global	create a global or a local copy?
ncutsadded	pointer to store number of copied cuts, or NULL

Definition at line 2073 of file scip_copy.c.

References copyCuts(), FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIP_STAGE_SOLVING, SCIPcheckStage(), SCIPdebugMsg, SCIPfindConshdlr(), SCIPgetDelayedPoolCuts(), SCIPgetNDelayedPoolCuts(), SCIPgetNPoolCuts(), SCIPgetPoolCuts(), Scip::set, SCIP_Set::stage, and TRUE.

Referenced by SCIP_DECL_HEUREXEC(), SCIPconvertCutsToConss(), SCIPcopyLargeNeighborhoodSearch(), setupAndSolveSubscip(), setupAndSolveSubscipRapidlearning(), setupProbingSCIP(), setupSubscipLpface(), and solveSubproblem().

◆ SCIPcopyConflicts()

SCIP_EXPORT SCIP_RETCODE SCIPcopyConflicts	(	SCIP *	sourcescip,
		SCIP *	targetscip,
		SCIP_HASHMAP *	varmap,
		SCIP_HASHMAP *	consmap,
		SCIP_Bool	global,
		SCIP_Bool	enablepricing,
		SCIP_Bool *	valid
	)

copies all active conflicts from the conflict pool of sourcescip and adds them as linear constraints to targetscip

Note: In a multi thread case, you need to lock the copying procedure from outside with a mutex.; Do not change the source SCIP environment during the copying process

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if sourcescip is in one of the following stages:

This method can be called if targetscip is in one of the following stages:

Note: sourcescip stage does not change; targetscip stage does not change

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

sourcescip	source SCIP data structure
targetscip	target SCIP data structure
varmap	a hashmap to store the mapping of source variables corresponding target variables, or NULL
consmap	a hashmap to store the mapping of source constraints to the corresponding target constraints, or NULL
global	create a global or a local copy?
enablepricing	should pricing be enabled in copied SCIP instance? If TRUE, the modifiable flag of constraints will be copied.
valid	pointer to store whether all constraints were validly copied

Definition at line 2165 of file scip_copy.c.

References Scip::conflictstore, FALSE, NULL, SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIPaddCons(), SCIPallocBufferArray, SCIPblkmem(), SCIPcheckStage(), SCIPconflictstoreGetConflicts(), SCIPconflictstoreGetNConflictsInStore(), SCIPconsGetHdlr(), SCIPconsGetName(), SCIPconsIsActive(), SCIPconsIsChecked(), SCIPconsIsConflict(), SCIPconsIsDeleted(), SCIPconsIsDynamic(), SCIPconsIsEnforced(), SCIPconsIsInitial(), SCIPconsIsLocal(), SCIPconsIsModifiable(), SCIPconsIsPropagated(), SCIPconsIsRemovable(), SCIPconsIsSeparated(), SCIPconsSetModifiable(), SCIPdebugMsg, SCIPgetConsCopy(), SCIPgetNConss(), SCIPgetNVars(), SCIPhashmapCreate(), SCIPhashmapFree(), SCIPreleaseCons(), and TRUE.

◆ SCIPcopyImplicationsCliques()

SCIP_EXPORT SCIP_RETCODE SCIPcopyImplicationsCliques	(	SCIP *	sourcescip,
		SCIP *	targetscip,
		SCIP_HASHMAP *	varmap,
		SCIP_HASHMAP *	consmap,
		SCIP_Bool	global,
		SCIP_Bool *	infeasible,
		int *	nbdchgs,
		int *	ncopied
	)

copies implications and cliques of sourcescip to targetscip

This function should be called for a targetscip in transformed stage. It can save time in presolving of the targetscip, since implications and cliques are copied.

Note: In a multi thread case, you need to lock the copying procedure from outside with a mutex.; Do not change the source SCIP environment during the copying process

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if sourcescip is in one of the following stages:

This method can be called if targetscip is in one of the following stages:

Note: sourcescip stage does not get changed; targetscip stage does not get changed

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

sourcescip	source SCIP data structure
targetscip	target SCIP data structure
varmap	a hashmap to store the mapping of source variables corresponding target variables, or NULL
consmap	a hashmap to store the mapping of source constraints to the corresponding target constraints, or NULL
global	create a global or a local copy?
infeasible	pointer to store whether an infeasibility was detected
nbdchgs	pointer to store the number of performed bound changes, or NULL
ncopied	pointer to store number of copied implications and cliques, or NULL

Definition at line 2323 of file scip_copy.c.

References FALSE, NULL, SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIPaddClique(), SCIPaddVarImplication(), SCIPallocBufferArray, SCIPcheckStage(), SCIPcliqueGetNVars(), SCIPcliqueGetValues(), SCIPcliqueGetVars(), SCIPcliqueIsEquation(), SCIPdebugMsg, SCIPfreeBufferArray, SCIPgetCliques(), SCIPgetNCliques(), SCIPgetVarCopy(), SCIPgetVarsData(), SCIPvarGetImplBounds(), SCIPvarGetImplTypes(), SCIPvarGetImplVars(), SCIPvarGetName(), SCIPvarGetNImpls(), and TRUE.

◆ SCIPcopyParamSettings()

SCIP_EXPORT SCIP_RETCODE SCIPcopyParamSettings	(	SCIP *	sourcescip,
		SCIP *	targetscip
	)

copies parameter settings from sourcescip to targetscip

Note: In a multi thread case, you need to lock the copying procedure from outside with a mutex.; Do not change the source SCIP environment during the copying process

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if sourcescip is in one of the following stages:

This method can be called if targetscip is in one of the following stages:

Note: sourcescip stage does not get changed; targetscip stage does not get changed

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

sourcescip	source SCIP data structure
targetscip	target SCIP data structure

Definition at line 2507 of file scip_copy.c.

References FALSE, Scip::messagehdlr, NULL, SCIP_CALL, SCIP_OKAY, SCIPcheckStage(), SCIPsetCopyParams(), Scip::set, and TRUE.

Referenced by applyRepair(), createSubscip(), createSubSCIP(), doCopy(), SCIPcopyLargeNeighborhoodSearch(), setupSCIPparamsStage3(), and setupSubscipLpface().

◆ SCIPgetSubscipDepth()

SCIP_EXPORT int SCIPgetSubscipDepth ( SCIP * scip )

gets depth of current scip instance (increased by each copy call)

Returns: Depth of subscip of SCIP is returned.

Precondition

This method can be called if SCIP is in one of the following stages:

Note: SCIP stage does not get changed

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

scip	SCIP data structure

Definition at line 2548 of file scip_copy.c.

References FALSE, NULL, SCIP_CALL_ABORT, SCIPcheckStage(), Scip::stat, SCIP_Stat::subscipdepth, and TRUE.

Referenced by assignAuxiliaryVariables(), createVariableMappings(), SCIP_DECL_CONSEXIT(), SCIP_DECL_CONSINITSOL(), SCIP_DECL_CONSPRESOL(), SCIP_DECL_EVENTINIT(), SCIP_DECL_HEUREXEC(), SCIPcreateConsOrbitope(), setupSubscipLpface(), and storeAllBilinearTerms().

◆ SCIPsetSubscipDepth()

SCIP_EXPORT void SCIPsetSubscipDepth	(	SCIP *	scip,
		int	newdepth
	)

sets depth of scip instance

Precondition

This method can be called if SCIP is in one of the following stages:

SCIP_STAGE_PROBLEM

Note: SCIP stage does not get changed

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

scip	SCIP data structure
newdepth	new subscip depth

Definition at line 2569 of file scip_copy.c.

References FALSE, NULL, SCIP_CALL_ABORT, SCIPcheckStage(), Scip::stat, SCIP_Stat::subscipdepth, and TRUE.

Referenced by setupSubscipLpface().

◆ SCIPcopy()

SCIP_EXPORT SCIP_RETCODE SCIPcopy	(	SCIP *	sourcescip,
		SCIP *	targetscip,
		SCIP_HASHMAP *	varmap,
		SCIP_HASHMAP *	consmap,
		const char *	suffix,
		SCIP_Bool	global,
		SCIP_Bool	enablepricing,
		SCIP_Bool	threadsafe,
		SCIP_Bool	passmessagehdlr,
		SCIP_Bool *	valid
	)

copies source SCIP to target SCIP; the copying process is done in the following order: 1) copy the plugins 2) copy the settings 3) create problem data in target-SCIP and copy the problem data of the source-SCIP 4) copy all active variables except those are marked as relaxation-only 5) copy all constraints

The source problem depends on the stage of the sourcescip - In SCIP_STAGE_PROBLEM, the original problem is copied, otherwise, the transformed problem is copied. For an explicit copy of the original problem, use SCIPcopyOrig().

Note: all variables and constraints which are created in the target-SCIP are not (user) captured; In a multi thread case, you need to lock the copying procedure from outside with a mutex. Also, 'passmessagehdlr' should be set to FALSE.; the 'threadsafe' parameter should only be set to TRUE if you are absolutely certain that the source and target SCIP instances will be solved in parallel. The usual case is to set this to FALSE, since thread safety typically incurs a performance cost.; Do not change the source SCIP environment during the copying process

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if sourcescip is in one of the following stages:

This method can be called if targetscip is in one of the following stages:

Note: sourcescip stage does not get changed; targetscip stage does not get changed

See SCIP_STAGE for a complete list of all possible solving stages.

copies source SCIP to target SCIP; the copying process is done in the following order: 1) copy the plugins 2) copy the settings 3) create problem data in target-SCIP and copy the problem data of the source-SCIP 4) copy all active variables except those that are marked as relaxation-only 5) copy all constraints

The source problem depends on the stage of the sourcescip - In SCIP_STAGE_PROBLEM, the original problem is copied, otherwise, the transformed problem is copied. For an explicit copy of the original problem, use SCIPcopyOrig().

Note: all variables and constraints which are created in the target-SCIP are not (user) captured; In a multi thread case, you need to lock the copying procedure from outside with a mutex. Also, 'passmessagehdlr' should be set to FALSE.; the 'threadsafe' parameter should only be set to TRUE if you are absolutely certain that the source and target SCIP instances will be solved in parallel. The usual case is to set this to FALSE, since thread safety typically incurs a performance cost.; Do not change the source SCIP environment during the copying process

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if sourcescip is in one of the following stages:

This method can be called if targetscip is in one of the following stages:

Note: sourcescip stage does not get changed; targetscip stage does not get changed

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

sourcescip	source SCIP data structure
targetscip	target SCIP data structure
varmap	a hashmap to store the mapping of source variables corresponding target variables, or NULL
consmap	a hashmap to store the mapping of source constraints to the corresponding target constraints, or NULL
suffix	optional suffix for problem name inside the target SCIP
global	create a global or a local copy?
enablepricing	should pricing be enabled in copied SCIP instance? If TRUE, pricer plugins will be copied and activated, and the modifiable flag of constraints will be respected. If FALSE, valid will be set to FALSE, when there are pricers present
threadsafe	FALSE, if data can be safely shared between the source and target SCIP, otherwise TRUE. This is usually set to FALSE
passmessagehdlr	should the message handler be passed
valid	pointer to store whether the copying was valid, or NULL

Definition at line 2814 of file scip_copy.c.

References doCopy(), FALSE, NULL, SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIPcheckStage(), and TRUE.

Referenced by applyDomainChanges(), initConcsolver(), SCIP_DECL_HEUREXEC(), SCIP_DECL_RELAXEXEC(), setupAndSolveSubscip(), setupAndSolveSubscipOneopt(), and writeBounds().

◆ SCIPcopyConsCompression()

SCIP_EXPORT SCIP_RETCODE SCIPcopyConsCompression	(	SCIP *	sourcescip,
		SCIP *	targetscip,
		SCIP_HASHMAP *	varmap,
		SCIP_HASHMAP *	consmap,
		const char *	suffix,
		SCIP_VAR **	fixedvars,
		SCIP_Real *	fixedvals,
		int	nfixedvars,
		SCIP_Bool	global,
		SCIP_Bool	enablepricing,
		SCIP_Bool	threadsafe,
		SCIP_Bool	passmessagehdlr,
		SCIP_Bool *	valid
	)

copies source SCIP to target SCIP but compresses constraints

constraint compression is performed by removing fixed variables immediately during constraint creation if the involved constraint handlers support compression

the copying process is done in the following order: 1) copy the plugins 2) copy the settings 3) create problem data in target-SCIP and copy the problem data of the source-SCIP 4) copy all active variables except those are marked as relaxation-only a) fix all variable copies specified by fixedvars, fixedvals, and nfixedvars b) enable constraint compression 5) copy all constraints

The source problem depends on the stage of the sourcescip - In SCIP_STAGE_PROBLEM, the original problem is copied, otherwise, the transformed problem is copied. For an explicit copy of the original problem, use SCIPcopyOrigConsCompression().

Note: : in case that a combination of local bounds and explicit fixing values should be used, the fixing value of a variable is preferred if local bounds and fixing value disagree.; all variables and constraints which are created in the target-SCIP are not (user) captured; In a multi thread case, you need to lock the copying procedure from outside with a mutex. Also, 'passmessagehdlr' should be set to FALSE.; the 'threadsafe' parameter should only be set to TRUE if you are absolutely certain that the source and target SCIP instances will be solved in parallel. The usual case is to set this to FALSE, since thread safety typically incurs a performance cost.; Do not change the source SCIP environment during the copying process

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if sourcescip is in one of the following stages:

This method can be called if targetscip is in one of the following stages:

Note: sourcescip stage does not get changed; targetscip stage does not get changed

See SCIP_STAGE for a complete list of all possible solving stages.

copies source SCIP to target SCIP but compresses constraints

constraint compression is performed by removing fixed variables immediately during constraint creation if the involved constraint handlers support compression

the copying process is done in the following order: 1) copy the plugins 2) copy the settings 3) create problem data in target-SCIP and copy the problem data of the source-SCIP 4) copy all active variables except those that are marked as relaxation-only a) fix all variable copies specified by fixedvars, fixedvals, and nfixedvars b) enable constraint compression 5) copy all constraints

The source problem depends on the stage of the sourcescip - In SCIP_STAGE_PROBLEM, the original problem is copied, otherwise, the transformed problem is copied. For an explicit copy of the original problem, use SCIPcopyOrigConsCompression().

Note: : in case that a combination of local bounds and explicit fixing values should be used, the fixing value of a variable is preferred if local bounds and fixing value disagree.; all variables and constraints which are created in the target-SCIP are not (user) captured; In a multi thread case, you need to lock the copying procedure from outside with a mutex. Also, 'passmessagehdlr' should be set to FALSE.; the 'threadsafe' parameter should only be set to TRUE if you are absolutely certain that the source and target SCIP instances will be solved in parallel. The usual case is to set this to FALSE, since thread safety typically incurs a performance cost.; Do not change the source SCIP environment during the copying process

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if sourcescip is in one of the following stages:

This method can be called if targetscip is in one of the following stages:

Note: sourcescip stage does not get changed; targetscip stage does not get changed

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

sourcescip	source SCIP data structure
targetscip	target SCIP data structure
varmap	a hashmap to store the mapping of source variables corresponding target variables, or NULL
consmap	a hashmap to store the mapping of source constraints to the corresponding target constraints, or NULL
suffix	optional suffix for problem name inside the target SCIP
fixedvars	source variables whose copies should be fixed in the target SCIP environment, or NULL
fixedvals	array of fixing values for target SCIP variables, or NULL
nfixedvars	number of source variables whose copies should be fixed in the target SCIP environment, or NULL
global	create a global or a local copy?
enablepricing	should pricing be enabled in copied SCIP instance? If TRUE, pricer plugins will be copied and activated, and the modifiable flag of constraints will be respected. If FALSE, valid will be set to FALSE, when there are pricers present
threadsafe	FALSE, if data can be safely shared between the source and target SCIP, otherwise TRUE. This is usually set to FALSE
passmessagehdlr	should the message handler be passed
valid	pointer to store whether the copying was valid, or NULL

Definition at line 2908 of file scip_copy.c.

References doCopy(), FALSE, NULL, SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIPcheckStage(), and TRUE.

Referenced by doSolveSubMIP(), SCIPcopyLargeNeighborhoodSearch(), setupAndSolve(), setupAndSolveSubscip(), setupAndSolveSubscipRapidlearning(), setupProbingSCIP(), setupSubscipLpface(), and solveSubproblem().

◆ SCIPcopyOrig()

SCIP_EXPORT SCIP_RETCODE SCIPcopyOrig	(	SCIP *	sourcescip,
		SCIP *	targetscip,
		SCIP_HASHMAP *	varmap,
		SCIP_HASHMAP *	consmap,
		const char *	suffix,
		SCIP_Bool	enablepricing,
		SCIP_Bool	threadsafe,
		SCIP_Bool	passmessagehdlr,
		SCIP_Bool *	valid
	)

copies source SCIP original problem to target SCIP; the copying process is done in the following order: 1) copy the plugins 2) copy the settings 3) create problem data in target-SCIP and copy the original problem data of the source-SCIP 4) copy all original variables 5) copy all original constraints

Note: all variables and constraints which are created in the target-SCIP are not (user) captured; In a multi thread case, you need to lock the copying procedure from outside with a mutex. Also, 'passmessagehdlr' should be set to FALSE.; the 'threadsafe' parameter should only be set to TRUE if you are absolutely certain that the source and target SCIP instances will be solved in parallel. The usual case is to set this to FALSE, since thread safety typically incurs a performance cost.; Do not change the source SCIP environment during the copying process

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if sourcescip is in one of the following stages:

This method can be called if targetscip is in one of the following stages:

Note: sourcescip stage does not get changed; targetscip stage does not get changed

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

sourcescip	source SCIP data structure
targetscip	target SCIP data structure
varmap	a hashmap to store the mapping of source variables corresponding target variables, or NULL
consmap	a hashmap to store the mapping of source constraints to the corresponding target constraints, or NULL
suffix	suffix which will be added to the names of the target SCIP, might be empty
enablepricing	should pricing be enabled in copied SCIP instance? If TRUE, pricer plugins will be copied and activated, and the modifiable flag of constraints will be respected. If FALSE, valid will be set to FALSE, when there are pricers present
threadsafe	FALSE, if data can be safely shared between the source and target SCIP, otherwise TRUE. This is usually set to FALSE
passmessagehdlr	should the message handler be passed
valid	pointer to store whether the copying was valid, or NULL

Definition at line 2989 of file scip_copy.c.

References doCopy(), FALSE, NULL, SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIPcheckStage(), and TRUE.

Referenced by SCIP_DECL_BENDERSCOPY(), and setupAndSolveFiniteSolSubscip().

◆ SCIPcopyOrigConsCompression()

SCIP_EXPORT SCIP_RETCODE SCIPcopyOrigConsCompression	(	SCIP *	sourcescip,
		SCIP *	targetscip,
		SCIP_HASHMAP *	varmap,
		SCIP_HASHMAP *	consmap,
		const char *	suffix,
		SCIP_VAR **	fixedvars,
		SCIP_Real *	fixedvals,
		int	nfixedvars,
		SCIP_Bool	enablepricing,
		SCIP_Bool	threadsafe,
		SCIP_Bool	passmessagehdlr,
		SCIP_Bool *	valid
	)

copies source SCIP original problem to target SCIP but compresses constraints

constraint compression is performed by removing fixed variables immediately during constraint creation if the involved constraint handlers support compression

the copying process is done in the following order: 1) copy the plugins 2) copy the settings 3) create problem data in target-SCIP and copy the problem data of the source-SCIP 4) copy all original variables a) fix all variable copies specified by fixedvars, fixedvals, and nfixedvars b) enable constraint compression 5) copy all constraints

Note: all variables and constraints which are created in the target-SCIP are not (user) captured; In a multi thread case, you need to lock the copying procedure from outside with a mutex. Also, 'passmessagehdlr' should be set to FALSE.; the 'threadsafe' parameter should only be set to TRUE if you are absolutely certain that the source and target SCIP instances will be solved in parallel. The usual case is to set this to FALSE, since thread safety typically incurs a performance cost.; Do not change the source SCIP environment during the copying process

Returns: SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See SCIP_RETCODE for a complete list of error codes.

Precondition

This method can be called if sourcescip is in one of the following stages:

This method can be called if targetscip is in one of the following stages:

Note: sourcescip stage does not get changed; targetscip stage does not get changed

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

sourcescip	source SCIP data structure
targetscip	target SCIP data structure
varmap	a hashmap to store the mapping of source variables corresponding target variables, or NULL
consmap	a hashmap to store the mapping of source constraints to the corresponding target constraints, or NULL
suffix	optional suffix for problem name inside the target SCIP
fixedvars	source variables whose copies should be fixed in the target SCIP environment, or NULL
fixedvals	array of fixing values for target SCIP variables, or NULL
nfixedvars	number of source variables whose copies should be fixed in the target SCIP environment, or NULL
enablepricing	should pricing be enabled in copied SCIP instance? If TRUE, pricer plugins will be copied and activated, and the modifiable flag of constraints will be respected. If FALSE, valid will be set to FALSE, when there are pricers present
threadsafe	FALSE, if data can be safely shared between the source and target SCIP, otherwise TRUE. This is usually set to FALSE
passmessagehdlr	should the message handler be passed
valid	pointer to store whether the copying was valid, or NULL

Definition at line 3076 of file scip_copy.c.

References doCopy(), FALSE, NULL, SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIPcheckStage(), SCIPsyncstoreCapture(), SCIPsyncstoreRelease(), Scip::syncstore, and TRUE.

◆ SCIPcheckCopyLimits()

SCIP_EXPORT SCIP_RETCODE SCIPcheckCopyLimits	(	SCIP *	sourcescip,
		SCIP_Bool *	success
	)

checks if there is enough time and memory left for copying the sourcescip into a sub-SCIP and solve the sub-SCIP

This is the case if the time and memory limit that would be passed to the sub-SCIP are larger than 0.0

Precondition

This method can be called if sourcescip is in one of the following stages:

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

sourcescip	source SCIP data structure
success	pointer to store whether there is time and memory left to copy the problem and run the sub-SCIP

Definition at line 3192 of file scip_copy.c.

References getCopyMemlimit(), getCopyTimelimit(), SCIP_CALL, SCIP_OKAY, SCIP_Real, and SCIPgetMemExternEstim().

Referenced by applyCompletesol(), applyOfins(), applyVbounds(), determineLimits(), SCIP_DECL_HEUREXEC(), SCIPapplyProximity(), SCIPapplyRens(), SCIPapplyZeroobj(), solveSubMIP(), and solveSubscip().

◆ SCIPcopyLimits()

SCIP_EXPORT SCIP_RETCODE SCIPcopyLimits	(	SCIP *	sourcescip,
		SCIP *	targetscip
	)

copies limits from source SCIP to target SCIP

Note: time and memory limit are reduced by the amount already spent in the source SCIP before installing the limit in the target SCIP; all other limits are disabled and need to be enabled afterwards, if needed

See also: SCIPsetCommonSubscipParams() to set further working limits and other parameters commonly used for auxiliary problems

Precondition

This method can be called if sourcescip is in one of the following stages:

See SCIP_STAGE for a complete list of all possible solving stages.

copies limits from source SCIP to target SCIP

Note: time and memory limit are reduced by the amount already spent in the source SCIP before installing the limit in the target SCIP; all other limits are disabled and need to be enabled afterwards, if needed

Precondition

This method can be called if sourcescip is in one of the following stages:

See SCIP_STAGE for a complete list of all possible solving stages.

Parameters

sourcescip	source SCIP data structure
targetscip	target SCIP data structure

Definition at line 3228 of file scip_copy.c.

References copySofttimelimit(), getCopyMemlimit(), getCopyTimelimit(), SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIPsetIntParam(), SCIPsetLongintParam(), and SCIPsetRealParam().

Referenced by createSubscip(), doSolveSubMIP(), SCIP_DECL_HEUREXEC(), SCIPapplyProximity(), SCIPsetCommonSubscipParams(), setLimits(), setupAndSolve(), setupAndSolveSubscip(), setupAndSolveSubscipCrossover(), setupAndSolveSubscipMutation(), setupAndSolveSubscipOneopt(), setupAndSolveSubscipRapidlearning(), setupSCIPparamsStage3(), solveSubscip(), wrapperDins(), and wrapperRins().

◆ SCIPsetCommonSubscipParams()

SCIP_EXPORT SCIP_RETCODE SCIPsetCommonSubscipParams	(	SCIP *	sourcescip,
		SCIP *	subscip,
		SCIP_Longint	nsubnodes,
		SCIP_Longint	nstallnodes,
		int	bestsollimit
	)

sets the working limits as well as common search parameters for the auxiliary problem

Note: memory and time limits are not affected, and must be set using SCIPcopyLimits() instead

Parameters

sourcescip	source SCIP data structure
subscip	target SCIP data structure, often a copy of `sourcescip`
nsubnodes	nodelimit for subscip, or -1 for no limit
nstallnodes	stall node limit for subscip, or -1 for no limit
bestsollimit	the limit on the number of best solutions found, or -1 for no limit

Definition at line 3269 of file scip_copy.c.

References FALSE, NULL, SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIP_PARAMSETTING_FAST, SCIP_PARAMSETTING_OFF, SCIPcopyLimits(), SCIPfindBranchrule(), SCIPfindConshdlr(), SCIPfindNodesel(), SCIPgetBoolParam(), SCIPisParamFixed(), SCIPsetBoolParam(), SCIPsetCharParam(), SCIPsetIntParam(), SCIPsetLongintParam(), SCIPsetPresolving(), SCIPsetSeparating(), SCIPsetSubscipsOff(), and TRUE.

Referenced by setupAndSolveSubscipLocalbranching(), and setupAndSolveSubscipTrustregion().

SCIP

Detailed Description

Functions

Function Documentation

◆ SCIPcopyPlugins()

◆ SCIPcopyBenders()

◆ SCIPcopyProb()

◆ SCIPcopyOrigProb()

◆ SCIPenableConsCompression()

◆ SCIPisConsCompressionEnabled()

◆ SCIPgetVarCopy()

◆ SCIPcopyVars()

◆ SCIPcopyOrigVars()

◆ SCIPmergeVariableStatistics()

◆ SCIPtranslateSubSol()

◆ SCIPtranslateSubSols()

◆ SCIPgetConsCopy()

◆ SCIPcopyConss()

◆ SCIPcopyOrigConss()

◆ SCIPconvertCutsToConss()

◆ SCIPcopyCuts()

◆ SCIPcopyConflicts()

◆ SCIPcopyImplicationsCliques()

◆ SCIPcopyParamSettings()

◆ SCIPgetSubscipDepth()

◆ SCIPsetSubscipDepth()

◆ SCIPcopy()

◆ SCIPcopyConsCompression()

◆ SCIPcopyOrig()

◆ SCIPcopyOrigConsCompression()

◆ SCIPcheckCopyLimits()

◆ SCIPcopyLimits()

◆ SCIPsetCommonSubscipParams()