objbenderscut.h

Go to the documentation of this file.

/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/*                                                                           */
/*                  This file is part of the program and library             */
/*         SCIP --- Solving Constraint Integer Programs                      */
/*                                                                           */
/*  Copyright 2002-2022 Zuse Institute Berlin                                */
/*                                                                           */
/*  Licensed under the Apache License, Version 2.0 (the "License");          */
/*  you may not use this file except in compliance with the License.         */
/*  You may obtain a copy of the License at                                  */
/*                                                                           */
/*      http://www.apache.org/licenses/LICENSE-2.0                           */
/*                                                                           */
/*  Unless required by applicable law or agreed to in writing, software      */
/*  distributed under the License is distributed on an "AS IS" BASIS,        */
/*  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. */
/*  See the License for the specific language governing permissions and      */
/*  limitations under the License.                                           */
/*                                                                           */
/*  You should have received a copy of the Apache-2.0 license                */
/*  along with SCIP; see the file LICENSE. If not visit scipopt.org.         */
/*                                                                           */
/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */

/**@file   objbenderscut.h
 * @brief  C++ wrapper for Benders' decomposition cuts
 * @author Stephen J. Maher
 */

/*---+----1----+----2----+----3----+----4----+----5----+----6----+----7----+----8----+----9----+----0----+----1----+----2*/

#ifndef __SCIP_OBJBENDERSCUT_H__
#define __SCIP_OBJBENDERSCUT_H__


#include <cassert>
#include <cstring>
#include <utility>

#include "scip/scip.h"
#include "objscip/objcloneable.h"
#include "objscip/objbenders.h"

namespace scip
{

/**
 *  @brief C++ wrapper for Benders' decomposition cut
 *
 *  This class defines the interface for the Benders' decomposition cuts implemented in C++. Note that there is
 *  a pure virtual function (this must be implemented). This function is: benderscut_exec().
 *
 *  - \ref BENDERSCUT "Instructions for implementing a Benders' decomposition plugin"
 *  - \ref BENDERSCUTS "List of available Benders' decomposition plugins"
 *  - \ref type_benderscut.h "Corresponding C interface"
 */
class ObjBenderscut : public ObjCloneable
{
public:
   /*lint --e{1540}*/

   /** SCIP data structure */
   SCIP* scip_;

   /** name of the Benders' decomposition cut */
   char* scip_name_;

   /** description of the Benders' decomposition cut */
   char* scip_desc_;

   /** the priority of the Benders' decomposition cut */
   const int scip_priority_;

   /** is the Benders' decomposition cut generated from the LP relaxation of the subproblem */
   const SCIP_Bool scip_islpcut_;

   /** default constructor */
   ObjBenderscut(
      SCIP*              scip,               /**< SCIP data structure */
      const char*        name,               /**< name of Benders' decomposition */
      const char*        desc,               /**< description of Benders' decomposition */
      int                priority,           /**< priority of the Benders' decomposition */
      SCIP_Bool          islpcut             /**< is the cut generated from the LP relaxation */
      )
      : scip_(scip),
        scip_name_(0),
        scip_desc_(0),
        scip_priority_(priority),
        scip_islpcut_(islpcut)
   {
      /* the macro SCIPduplicateMemoryArray does not need the first argument: */
      SCIP_CALL_ABORT( SCIPduplicateMemoryArray(scip_, &scip_name_, name, std::strlen(name)+1) );
      SCIP_CALL_ABORT( SCIPduplicateMemoryArray(scip_, &scip_desc_, desc, std::strlen(desc)+1) );
   }

   /** copy constructor */
   ObjBenderscut(const ObjBenderscut& o)
       : ObjBenderscut(o.scip_, o.scip_name_, o.scip_desc_, o.scip_priority_, o.scip_islpcut_)
   {
   }

   /** move constructor */
   ObjBenderscut(ObjBenderscut&& o)
       : scip_(o.scip_), scip_name_(0), scip_desc_(0), scip_priority_(o.scip_priority_), scip_islpcut_(o.scip_islpcut_)
   {
      std::swap(scip_name_, o.scip_name_);
      std::swap(scip_desc_, o.scip_desc_);
   }

   /** destructor */
   virtual ~ObjBenderscut()
   {
      /* the macro SCIPfreeMemoryArray does not need the first argument: */
      /*lint --e{64}*/
      SCIPfreeMemoryArray(scip_, &scip_name_);
      SCIPfreeMemoryArray(scip_, &scip_desc_);
   }

   /** assignment of polymorphic classes causes slicing and is therefore disabled. */
   ObjBenderscut& operator=(const ObjBenderscut& o) = delete;

   /** assignment of polymorphic classes causes slicing and is therefore disabled. */
   ObjBenderscut& operator=(ObjBenderscut&& o) = delete;

   /** copy method for compression plugins (called when SCIP copies plugins)
    *
    *  @see SCIP_DECL_BENDERSCUTCOPY(x) in @ref type_benders.h
    */
   virtual SCIP_DECL_BENDERSCUTCOPY(scip_copy)
   {  /*lint --e{715}*/
      return SCIP_OKAY;
   }

   /** destructor of Benders' decomposition cuts to free user data (called when SCIP is exiting)
    *
    *  @see SCIP_DECL_BENDERSCUTFREE(x) in @ref type_benders.h
    */
   virtual SCIP_DECL_BENDERSCUTFREE(scip_free)
   {  /*lint --e{715}*/
      return SCIP_OKAY;
   }

   /** initialization method of Benders' decomposition cuts (called after problem was transformed)
    *
    *  @see SCIP_DECL_BENDERSCUTINIT(x) in @ref type_benders.h
    */
   virtual SCIP_DECL_BENDERSCUTINIT(scip_init)
   {  /*lint --e{715}*/
      return SCIP_OKAY;
   }

   /** deinitialization method of Benders' decomposition cuts (called before transformed problem is freed)
    *
    *  @see SCIP_DECL_BENDERSCUTEXIT(x) in @ref type_benders.h
    */
   virtual SCIP_DECL_BENDERSCUTEXIT(scip_exit)
   {  /*lint --e{715}*/
      return SCIP_OKAY;
   }

   /** solving process initialization method of Benders' decomposition cuts (called when branch and bound process is about to begin)
    *
    *  @see SCIP_DECL_BENDERSCUTINITSOL(x) in @ref type_benders.h
    */
   virtual SCIP_DECL_BENDERSCUTINITSOL(scip_initsol)
   {  /*lint --e{715}*/
      return SCIP_OKAY;
   }

   /** solving process deinitialization method of Benders' decomposition cuts (called before branch and bound process data is freed)
    *
    *  This method is called before the branch and bound process is freed.
    *  The Benders' decomposition cuts should use this call to clean up its branch and bound data.
    *
    *  @see SCIP_DECL_BENDERSCUTEXITSOL(x) in @ref type_benders.h
    */
   virtual SCIP_DECL_BENDERSCUTEXITSOL(scip_exitsol)
   {  /*lint --e{715}*/
      return SCIP_OKAY;
   }

   /** execution method of Benders' decomposition cuts technique
    *
    *  @see SCIP_DECL_BENDERSCUTEXEC(x) in @ref type_benders.h
    */
   virtual SCIP_DECL_BENDERSCUTEXEC(scip_exec) = 0;

};

} /* namespace scip */



/** creates the Benders' decomposition cut for the given Benders' decomposition cut object and includes it in SCIP
 *
 *  The method should be called in one of the following ways:
 *
 *   1. The user is responsible for deleting the object:
 *       SCIP_CALL( SCIPcreate(&scip) );
 *       ...
 *       MyBenderscut* mybenderscut = new MyBenderscut(...);
 *       SCIP_CALL( SCIPincludeObjBenderscut(scip, benders, &mybenderscut, FALSE) );
 *       ...
 *       SCIP_CALL( SCIPfree(&scip) );
 *       delete mybenderscut;    // delete benderscut AFTER SCIPfree() !
 *
 *   2. The object pointer is passed to SCIP and deleted by SCIP in the SCIPfree() call:
 *       SCIP_CALL( SCIPcreate(&scip) );
 *       ...
 *       SCIP_CALL( SCIPincludeObjBenderscut(scip, benders, new MyBenderscut(...), TRUE) );
 *       ...
 *       SCIP_CALL( SCIPfree(&scip) );  // destructor of MyBenderscut is called here
 */
SCIP_EXPORT
SCIP_RETCODE SCIPincludeObjBenderscut(
   SCIP*                 scip,               /**< SCIP data structure */
   scip::ObjBenders*     objbenders,         /**< Benders' decomposition object */
   scip::ObjBenderscut*  objbenderscut,      /**< Benders' decomposition cut object */
   SCIP_Bool             deleteobject        /**< should the Benders' cut object be deleted when benderscut is freed? */
   );

/** returns the benderscut object of the given name, or 0 if not existing */
SCIP_EXPORT
scip::ObjBenderscut* SCIPfindObjBenderscut(
   scip::ObjBenders*     objbenders,         /**< Benders' decomposition object */
   const char*           name                /**< name of Benders' decomposition cut */
   );

/** returns the benderscut object for the given constraint handler */
SCIP_EXPORT
scip::ObjBenderscut* SCIPgetObjBenderscut(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_BENDERSCUT*      benderscut          /**< Benders' decomposition cut */
   );

#endif