Detailed Description
internal methods for handling parameter settings
Definition in file paramset.h.
#include "scip/def.h"
#include "blockmemshell/memory.h"
#include "scip/type_set.h"
#include "scip/type_retcode.h"
#include "scip/type_paramset.h"
#include "scip/pub_paramset.h"
#include "scip/pub_misc.h"
Go to the source code of this file.
Function Documentation
◆ SCIPparamsetCreate()
SCIP_RETCODE SCIPparamsetCreate | ( | SCIP_PARAMSET ** | paramset, |
BMS_BLKMEM * | blkmem | ||
) |
creates parameter set
- Parameters
-
paramset pointer to store the parameter set blkmem block memory
Definition at line 1426 of file paramset.c.
References BMSallocMemory, NULL, SCIP_ALLOC, SCIP_CALL, SCIP_HASHSIZE_PARAMS, SCIP_OKAY, and SCIPhashtableCreate().
Referenced by SCIPsetCopyPlugins().
◆ SCIPparamsetFree()
void SCIPparamsetFree | ( | SCIP_PARAMSET ** | paramset, |
BMS_BLKMEM * | blkmem | ||
) |
frees parameter set
- Parameters
-
paramset pointer to the parameter set blkmem block memory
Definition at line 1446 of file paramset.c.
References BMSfreeMemory, BMSfreeMemoryArrayNull, NULL, paramFree(), and SCIPhashtableFree().
◆ SCIPparamsetAddBool()
SCIP_RETCODE SCIPparamsetAddBool | ( | SCIP_PARAMSET * | paramset, |
SCIP_MESSAGEHDLR * | messagehdlr, | ||
BMS_BLKMEM * | blkmem, | ||
const char * | name, | ||
const char * | desc, | ||
SCIP_Bool * | valueptr, | ||
SCIP_Bool | isadvanced, | ||
SCIP_Bool | defaultvalue, | ||
SCIP_DECL_PARAMCHGD((*paramchgd)) | , | ||
SCIP_PARAMDATA * | paramdata | ||
) |
creates a bool parameter, sets it to its default value, and adds it to the parameter set
creates a SCIP_Bool parameter, sets it to its default value, and adds it to the parameter set
- Parameters
-
paramset parameter set messagehdlr message handler blkmem block memory name name of the parameter desc description of the parameter valueptr pointer to store the current parameter value, or NULL isadvanced is this parameter an advanced parameter? defaultvalue default value of the parameter paramdata locally defined parameter specific data
Definition at line 1499 of file paramset.c.
References NULL, paramCreateBool(), paramsetAdd(), SCIP_CALL, and SCIP_OKAY.
◆ SCIPparamsetAddInt()
SCIP_RETCODE SCIPparamsetAddInt | ( | SCIP_PARAMSET * | paramset, |
SCIP_MESSAGEHDLR * | messagehdlr, | ||
BMS_BLKMEM * | blkmem, | ||
const char * | name, | ||
const char * | desc, | ||
int * | valueptr, | ||
SCIP_Bool | isadvanced, | ||
int | defaultvalue, | ||
int | minvalue, | ||
int | maxvalue, | ||
SCIP_DECL_PARAMCHGD((*paramchgd)) | , | ||
SCIP_PARAMDATA * | paramdata | ||
) |
creates a int parameter, sets it to its default value, and adds it to the parameter set
- Parameters
-
paramset parameter set messagehdlr message handler blkmem block memory name name of the parameter desc description of the parameter valueptr pointer to store the current parameter value, or NULL isadvanced is this parameter an advanced parameter? defaultvalue default value of the parameter minvalue minimum value for parameter maxvalue maximum value for parameter paramdata locally defined parameter specific data
Definition at line 1526 of file paramset.c.
References NULL, paramCreateInt(), paramsetAdd(), SCIP_CALL, and SCIP_OKAY.
◆ SCIPparamsetAddLongint()
SCIP_RETCODE SCIPparamsetAddLongint | ( | SCIP_PARAMSET * | paramset, |
SCIP_MESSAGEHDLR * | messagehdlr, | ||
BMS_BLKMEM * | blkmem, | ||
const char * | name, | ||
const char * | desc, | ||
SCIP_Longint * | valueptr, | ||
SCIP_Bool | isadvanced, | ||
SCIP_Longint | defaultvalue, | ||
SCIP_Longint | minvalue, | ||
SCIP_Longint | maxvalue, | ||
SCIP_DECL_PARAMCHGD((*paramchgd)) | , | ||
SCIP_PARAMDATA * | paramdata | ||
) |
creates a SCIP_Longint parameter, sets it to its default value, and adds it to the parameter set
- Parameters
-
paramset parameter set messagehdlr message handler blkmem block memory name name of the parameter desc description of the parameter valueptr pointer to store the current parameter value, or NULL isadvanced is this parameter an advanced parameter? defaultvalue default value of the parameter minvalue minimum value for parameter maxvalue maximum value for parameter paramdata locally defined parameter specific data
Definition at line 1556 of file paramset.c.
References NULL, paramCreateLongint(), paramsetAdd(), SCIP_CALL, and SCIP_OKAY.
◆ SCIPparamsetAddReal()
SCIP_RETCODE SCIPparamsetAddReal | ( | SCIP_PARAMSET * | paramset, |
SCIP_MESSAGEHDLR * | messagehdlr, | ||
BMS_BLKMEM * | blkmem, | ||
const char * | name, | ||
const char * | desc, | ||
SCIP_Real * | valueptr, | ||
SCIP_Bool | isadvanced, | ||
SCIP_Real | defaultvalue, | ||
SCIP_Real | minvalue, | ||
SCIP_Real | maxvalue, | ||
SCIP_DECL_PARAMCHGD((*paramchgd)) | , | ||
SCIP_PARAMDATA * | paramdata | ||
) |
creates a SCIP_Real parameter, sets it to its default value, and adds it to the parameter set
- Parameters
-
paramset parameter set messagehdlr message handler blkmem block memory name name of the parameter desc description of the parameter valueptr pointer to store the current parameter value, or NULL isadvanced is this parameter an advanced parameter? defaultvalue default value of the parameter minvalue minimum value for parameter maxvalue maximum value for parameter paramdata locally defined parameter specific data
Definition at line 1586 of file paramset.c.
References NULL, paramCreateReal(), paramsetAdd(), SCIP_CALL, and SCIP_OKAY.
Referenced by SCIPsetAddBoolParam().
◆ SCIPparamsetAddChar()
SCIP_RETCODE SCIPparamsetAddChar | ( | SCIP_PARAMSET * | paramset, |
SCIP_MESSAGEHDLR * | messagehdlr, | ||
BMS_BLKMEM * | blkmem, | ||
const char * | name, | ||
const char * | desc, | ||
char * | valueptr, | ||
SCIP_Bool | isadvanced, | ||
char | defaultvalue, | ||
const char * | allowedvalues, | ||
SCIP_DECL_PARAMCHGD((*paramchgd)) | , | ||
SCIP_PARAMDATA * | paramdata | ||
) |
creates a char parameter, sets it to its default value, and adds it to the parameter set
- Parameters
-
paramset parameter set messagehdlr message handler blkmem block memory name name of the parameter desc description of the parameter valueptr pointer to store the current parameter value, or NULL isadvanced is this parameter an advanced parameter? defaultvalue default value of the parameter allowedvalues array with possible parameter values, or NULL if not restricted paramdata locally defined parameter specific data
Definition at line 1616 of file paramset.c.
References NULL, paramCreateChar(), paramsetAdd(), SCIP_CALL, and SCIP_OKAY.
Referenced by SCIPsetAddIntParam().
◆ SCIPparamsetAddString()
SCIP_RETCODE SCIPparamsetAddString | ( | SCIP_PARAMSET * | paramset, |
SCIP_MESSAGEHDLR * | messagehdlr, | ||
BMS_BLKMEM * | blkmem, | ||
const char * | name, | ||
const char * | desc, | ||
char ** | valueptr, | ||
SCIP_Bool | isadvanced, | ||
const char * | defaultvalue, | ||
SCIP_DECL_PARAMCHGD((*paramchgd)) | , | ||
SCIP_PARAMDATA * | paramdata | ||
) |
creates a string parameter, sets it to its default value, and adds it to the parameter set
- Parameters
-
paramset parameter set messagehdlr message handler blkmem block memory name name of the parameter desc description of the parameter valueptr pointer to store the current parameter value, or NULL isadvanced is this parameter an advanced parameter? defaultvalue default value of the parameter paramdata locally defined parameter specific data
Definition at line 1645 of file paramset.c.
References NULL, paramCreateString(), paramsetAdd(), SCIP_CALL, and SCIP_OKAY.
Referenced by SCIPsetAddLongintParam().
◆ SCIPparamsetIsFixed()
SCIP_Bool SCIPparamsetIsFixed | ( | SCIP_PARAMSET * | paramset, |
const char * | name | ||
) |
returns whether an existing parameter is fixed
- Parameters
-
paramset parameter set name name of the parameter
Definition at line 1690 of file paramset.c.
References FALSE, SCIP_ParamSet::hashtable, NULL, SCIPABORT, SCIPerrorMessage, SCIPhashtableRetrieve(), and SCIPparamIsFixed().
Referenced by SCIPparamsetSetToSubscipsOff(), and SCIPsetAddLongintParam().
◆ SCIPparamsetGetParam()
SCIP_PARAM* SCIPparamsetGetParam | ( | SCIP_PARAMSET * | paramset, |
const char * | name | ||
) |
returns the pointer to an existing SCIP parameter
- Parameters
-
paramset parameter set name name of the parameter
Definition at line 1712 of file paramset.c.
References SCIP_ParamSet::hashtable, NULL, and SCIPhashtableRetrieve().
Referenced by SCIPsetAddRealParam().
◆ SCIPparamsetGetBool()
SCIP_RETCODE SCIPparamsetGetBool | ( | SCIP_PARAMSET * | paramset, |
const char * | name, | ||
SCIP_Bool * | value | ||
) |
gets the value of an existing SCIP_Bool parameter
- Parameters
-
paramset parameter set name name of the parameter value pointer to store the parameter
Definition at line 1724 of file paramset.c.
References SCIP_ParamSet::hashtable, NULL, SCIP_Param::paramtype, paramtypeGetName(), SCIP_OKAY, SCIP_PARAMETERUNKNOWN, SCIP_PARAMETERWRONGTYPE, SCIP_PARAMTYPE_BOOL, SCIPerrorMessage, SCIPhashtableRetrieve(), and SCIPparamGetBool().
Referenced by SCIPsetAddRealParam().
◆ SCIPparamsetGetInt()
SCIP_RETCODE SCIPparamsetGetInt | ( | SCIP_PARAMSET * | paramset, |
const char * | name, | ||
int * | value | ||
) |
gets the value of an existing int parameter
- Parameters
-
paramset parameter set name name of the parameter value pointer to store the parameter
Definition at line 1756 of file paramset.c.
References SCIP_ParamSet::hashtable, NULL, SCIP_Param::paramtype, paramtypeGetName(), SCIP_OKAY, SCIP_PARAMETERUNKNOWN, SCIP_PARAMETERWRONGTYPE, SCIP_PARAMTYPE_INT, SCIPerrorMessage, SCIPhashtableRetrieve(), and SCIPparamGetInt().
Referenced by SCIPparamsetSetToSubscipsOff(), and SCIPsetAddCharParam().
◆ SCIPparamsetGetLongint()
SCIP_RETCODE SCIPparamsetGetLongint | ( | SCIP_PARAMSET * | paramset, |
const char * | name, | ||
SCIP_Longint * | value | ||
) |
gets the value of an existing SCIP_Longint parameter
- Parameters
-
paramset parameter set name name of the parameter value pointer to store the parameter
Definition at line 1788 of file paramset.c.
References SCIP_ParamSet::hashtable, NULL, SCIP_Param::paramtype, paramtypeGetName(), SCIP_OKAY, SCIP_PARAMETERUNKNOWN, SCIP_PARAMETERWRONGTYPE, SCIP_PARAMTYPE_LONGINT, SCIPerrorMessage, SCIPhashtableRetrieve(), and SCIPparamGetLongint().
◆ SCIPparamsetGetReal()
SCIP_RETCODE SCIPparamsetGetReal | ( | SCIP_PARAMSET * | paramset, |
const char * | name, | ||
SCIP_Real * | value | ||
) |
gets the value of an existing SCIP_Real parameter
- Parameters
-
paramset parameter set name name of the parameter value pointer to store the parameter
Definition at line 1820 of file paramset.c.
References SCIP_ParamSet::hashtable, NULL, SCIP_Param::paramtype, paramtypeGetName(), SCIP_OKAY, SCIP_PARAMETERUNKNOWN, SCIP_PARAMETERWRONGTYPE, SCIP_PARAMTYPE_REAL, SCIPerrorMessage, SCIPhashtableRetrieve(), and SCIPparamGetReal().
◆ SCIPparamsetGetChar()
SCIP_RETCODE SCIPparamsetGetChar | ( | SCIP_PARAMSET * | paramset, |
const char * | name, | ||
char * | value | ||
) |
gets the value of an existing char parameter
- Parameters
-
paramset parameter set name name of the parameter value pointer to store the parameter
Definition at line 1852 of file paramset.c.
References SCIP_ParamSet::hashtable, NULL, SCIP_Param::paramtype, paramtypeGetName(), SCIP_OKAY, SCIP_PARAMETERUNKNOWN, SCIP_PARAMETERWRONGTYPE, SCIP_PARAMTYPE_CHAR, SCIPerrorMessage, SCIPhashtableRetrieve(), and SCIPparamGetChar().
Referenced by SCIPsetIsParamFixed().
◆ SCIPparamsetGetString()
SCIP_RETCODE SCIPparamsetGetString | ( | SCIP_PARAMSET * | paramset, |
const char * | name, | ||
char ** | value | ||
) |
gets the value of an existing string parameter
- Parameters
-
paramset parameter set name name of the parameter value pointer to store the parameter
Definition at line 1884 of file paramset.c.
References SCIP_ParamSet::hashtable, NULL, SCIP_Param::paramtype, paramtypeGetName(), SCIP_OKAY, SCIP_PARAMETERUNKNOWN, SCIP_PARAMETERWRONGTYPE, SCIP_PARAMTYPE_STRING, SCIPerrorMessage, SCIPhashtableRetrieve(), and SCIPparamGetString().
Referenced by SCIPsetGetParam().
◆ SCIPparamsetFix()
SCIP_RETCODE SCIPparamsetFix | ( | SCIP_PARAMSET * | paramset, |
const char * | name, | ||
SCIP_Bool | fixed | ||
) |
changes the fixing status of an existing parameter
- Parameters
-
paramset parameter set name name of the parameter fixed new fixing status of the parameter
Definition at line 1916 of file paramset.c.
References SCIP_ParamSet::hashtable, NULL, SCIP_OKAY, SCIP_PARAMETERUNKNOWN, SCIPerrorMessage, SCIPhashtableRetrieve(), and SCIPparamSetFixed().
Referenced by SCIPparamsetSetToSubscipsOff(), and SCIPsetGetBoolParam().
◆ SCIPparamsetSetBool()
SCIP_RETCODE SCIPparamsetSetBool | ( | SCIP_PARAMSET * | paramset, |
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr, | ||
const char * | name, | ||
SCIP_Bool | value | ||
) |
changes the value of an existing SCIP_Bool parameter
- Parameters
-
paramset parameter set set global SCIP settings messagehdlr message handler name name of the parameter value new value of the parameter
Definition at line 1940 of file paramset.c.
References FALSE, SCIP_ParamSet::hashtable, NULL, SCIP_Param::paramtype, paramtypeGetName(), SCIP_CALL, SCIP_OKAY, SCIP_PARAMETERUNKNOWN, SCIP_PARAMETERWRONGTYPE, SCIP_PARAMTYPE_BOOL, SCIPerrorMessage, SCIPhashtableRetrieve(), SCIPparamSetBool(), and TRUE.
Referenced by SCIPparamsetCopyParams(), and SCIPsetGetRealParam().
◆ SCIPparamsetSetInt()
SCIP_RETCODE SCIPparamsetSetInt | ( | SCIP_PARAMSET * | paramset, |
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr, | ||
const char * | name, | ||
int | value | ||
) |
changes the value of an existing int parameter
- Parameters
-
paramset parameter set set global SCIP settings messagehdlr message handler name name of the parameter value new value of the parameter
Definition at line 1974 of file paramset.c.
References FALSE, SCIP_ParamSet::hashtable, NULL, SCIP_Param::paramtype, paramtypeGetName(), SCIP_CALL, SCIP_OKAY, SCIP_PARAMETERUNKNOWN, SCIP_PARAMETERWRONGTYPE, SCIP_PARAMTYPE_INT, SCIPerrorMessage, SCIPhashtableRetrieve(), SCIPparamSetInt(), and TRUE.
Referenced by SCIPsetChgBoolParam().
◆ SCIPparamsetSetLongint()
SCIP_RETCODE SCIPparamsetSetLongint | ( | SCIP_PARAMSET * | paramset, |
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr, | ||
const char * | name, | ||
SCIP_Longint | value | ||
) |
changes the value of an existing SCIP_Longint parameter
- Parameters
-
paramset parameter set set global SCIP settings messagehdlr message handler name name of the parameter value new value of the parameter
Definition at line 2008 of file paramset.c.
References FALSE, SCIP_ParamSet::hashtable, NULL, SCIP_Param::paramtype, paramtypeGetName(), SCIP_CALL, SCIP_OKAY, SCIP_PARAMETERUNKNOWN, SCIP_PARAMETERWRONGTYPE, SCIP_PARAMTYPE_LONGINT, SCIPerrorMessage, SCIPhashtableRetrieve(), SCIPparamSetLongint(), and TRUE.
Referenced by SCIPsetChgIntParam().
◆ SCIPparamsetSetReal()
SCIP_RETCODE SCIPparamsetSetReal | ( | SCIP_PARAMSET * | paramset, |
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr, | ||
const char * | name, | ||
SCIP_Real | value | ||
) |
changes the value of an existing SCIP_Real parameter
- Parameters
-
paramset parameter set set global SCIP settings messagehdlr message handler name name of the parameter value new value of the parameter
Definition at line 2042 of file paramset.c.
References FALSE, SCIP_ParamSet::hashtable, NULL, SCIP_Param::paramtype, paramtypeGetName(), SCIP_CALL, SCIP_OKAY, SCIP_PARAMETERUNKNOWN, SCIP_PARAMETERWRONGTYPE, SCIP_PARAMTYPE_REAL, SCIPerrorMessage, SCIPhashtableRetrieve(), SCIPparamSetReal(), and TRUE.
Referenced by SCIPsetSetDefaultIntParam().
◆ SCIPparamsetSetChar()
SCIP_RETCODE SCIPparamsetSetChar | ( | SCIP_PARAMSET * | paramset, |
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr, | ||
const char * | name, | ||
char | value | ||
) |
changes the value of an existing char parameter
- Parameters
-
paramset parameter set set global SCIP settings messagehdlr message handler name name of the parameter value new value of the parameter
Definition at line 2076 of file paramset.c.
References FALSE, SCIP_ParamSet::hashtable, NULL, SCIP_Param::paramtype, paramtypeGetName(), SCIP_CALL, SCIP_OKAY, SCIP_PARAMETERUNKNOWN, SCIP_PARAMETERWRONGTYPE, SCIP_PARAMTYPE_CHAR, SCIPerrorMessage, SCIPhashtableRetrieve(), SCIPparamSetChar(), and TRUE.
Referenced by SCIPsetSetLongintParam().
◆ SCIPparamsetSetString()
SCIP_RETCODE SCIPparamsetSetString | ( | SCIP_PARAMSET * | paramset, |
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr, | ||
const char * | name, | ||
const char * | value | ||
) |
changes the value of an existing string parameter
- Parameters
-
paramset parameter set set global SCIP settings messagehdlr message handler name name of the parameter value new value of the parameter
Definition at line 2110 of file paramset.c.
References FALSE, SCIP_ParamSet::hashtable, NULL, SCIP_Param::paramtype, paramtypeGetName(), SCIP_CALL, SCIP_OKAY, SCIP_PARAMETERUNKNOWN, SCIP_PARAMETERWRONGTYPE, SCIP_PARAMTYPE_STRING, SCIPerrorMessage, SCIPhashtableRetrieve(), SCIPparamSetString(), and TRUE.
Referenced by SCIPsetSetRealParam().
◆ SCIPparamsetSetDefaultBool()
SCIP_RETCODE SCIPparamsetSetDefaultBool | ( | SCIP_PARAMSET * | paramset, |
const char * | name, | ||
SCIP_Bool | defaultvalue | ||
) |
changes the default value of an existing SCIP_Bool parameter
- Parameters
-
paramset parameter set name name of the parameter defaultvalue new default value of the parameter
Definition at line 2144 of file paramset.c.
References SCIP_ParamSet::hashtable, NULL, SCIP_Param::paramtype, paramtypeGetName(), SCIP_OKAY, SCIP_PARAMETERUNKNOWN, SCIP_PARAMETERWRONGTYPE, SCIP_PARAMTYPE_BOOL, SCIPerrorMessage, SCIPhashtableRetrieve(), and SCIPparamSetDefaultBool().
Referenced by SCIPsetGetCharParam().
◆ SCIPparamsetSetDefaultInt()
SCIP_RETCODE SCIPparamsetSetDefaultInt | ( | SCIP_PARAMSET * | paramset, |
const char * | name, | ||
int | defaultvalue | ||
) |
changes the default value of an existing int parameter
- Parameters
-
paramset parameter set name name of the parameter defaultvalue new default value of the parameter
Definition at line 2175 of file paramset.c.
References SCIP_ParamSet::hashtable, NULL, SCIP_Param::paramtype, paramtypeGetName(), SCIP_OKAY, SCIP_PARAMETERUNKNOWN, SCIP_PARAMETERWRONGTYPE, SCIP_PARAMTYPE_INT, SCIPerrorMessage, SCIPhashtableRetrieve(), and SCIPparamSetDefaultInt().
Referenced by SCIPsetChgBoolParam().
◆ SCIPparamsetSetDefaultLongint()
SCIP_RETCODE SCIPparamsetSetDefaultLongint | ( | SCIP_PARAMSET * | paramset, |
const char * | name, | ||
SCIP_Longint | defaultvalue | ||
) |
changes the default value of an existing SCIP_Longint parameter
- Parameters
-
paramset parameter set name name of the parameter defaultvalue new default value of the parameter
Definition at line 2206 of file paramset.c.
References SCIP_ParamSet::hashtable, NULL, SCIP_Param::paramtype, paramtypeGetName(), SCIP_OKAY, SCIP_PARAMETERUNKNOWN, SCIP_PARAMETERWRONGTYPE, SCIP_PARAMTYPE_LONGINT, SCIPerrorMessage, SCIPhashtableRetrieve(), and SCIPparamSetDefaultLongint().
◆ SCIPparamsetSetDefaultReal()
SCIP_RETCODE SCIPparamsetSetDefaultReal | ( | SCIP_PARAMSET * | paramset, |
const char * | name, | ||
SCIP_Real | defaultvalue | ||
) |
changes the default value of an existing SCIP_Real parameter
- Parameters
-
paramset parameter set name name of the parameter defaultvalue new default value of the parameter
Definition at line 2237 of file paramset.c.
References SCIP_ParamSet::hashtable, NULL, SCIP_Param::paramtype, paramtypeGetName(), SCIP_OKAY, SCIP_PARAMETERUNKNOWN, SCIP_PARAMETERWRONGTYPE, SCIP_PARAMTYPE_REAL, SCIPerrorMessage, SCIPhashtableRetrieve(), and SCIPparamSetDefaultReal().
◆ SCIPparamsetSetDefaultChar()
SCIP_RETCODE SCIPparamsetSetDefaultChar | ( | SCIP_PARAMSET * | paramset, |
const char * | name, | ||
char | defaultvalue | ||
) |
changes the default value of an existing char parameter
- Parameters
-
paramset parameter set name name of the parameter defaultvalue new default value of the parameter
Definition at line 2268 of file paramset.c.
References SCIP_ParamSet::hashtable, NULL, SCIP_Param::paramtype, paramtypeGetName(), SCIP_OKAY, SCIP_PARAMETERUNKNOWN, SCIP_PARAMETERWRONGTYPE, SCIP_PARAMTYPE_CHAR, SCIPerrorMessage, SCIPhashtableRetrieve(), and SCIPparamSetDefaultChar().
◆ SCIPparamsetSetDefaultString()
SCIP_RETCODE SCIPparamsetSetDefaultString | ( | SCIP_PARAMSET * | paramset, |
const char * | name, | ||
const char * | defaultvalue | ||
) |
changes the default value of an existing string parameter
- Parameters
-
paramset parameter set name name of the parameter defaultvalue new default value of the parameter
Definition at line 2299 of file paramset.c.
References SCIP_ParamSet::hashtable, NULL, SCIP_Param::paramtype, paramtypeGetName(), SCIP_OKAY, SCIP_PARAMETERUNKNOWN, SCIP_PARAMETERWRONGTYPE, SCIP_PARAMTYPE_STRING, SCIPerrorMessage, SCIPhashtableRetrieve(), and SCIPparamSetDefaultString().
◆ SCIPparamsetRead()
SCIP_RETCODE SCIPparamsetRead | ( | SCIP_PARAMSET * | paramset, |
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr, | ||
const char * | filename | ||
) |
reads parameters from a file
- Parameters
-
paramset parameter set set global SCIP settings messagehdlr message handler filename file name
Definition at line 2639 of file paramset.c.
References FALSE, NULL, paramsetParse(), SCIP_Bool, SCIP_CALL, SCIP_NOFILE, SCIP_OKAY, SCIP_READERROR, SCIPerrorMessage, and SCIPprintSysError().
Referenced by SCIPsetChgCharParam().
◆ SCIPparamsetWrite()
SCIP_RETCODE SCIPparamsetWrite | ( | SCIP_PARAMSET * | paramset, |
SCIP_MESSAGEHDLR * | messagehdlr, | ||
const char * | filename, | ||
SCIP_Bool | comments, | ||
SCIP_Bool | onlychanged | ||
) |
writes all parameters in the parameter set to a file
- Parameters
-
paramset parameter set messagehdlr message handler filename file name, or NULL for stdout comments should parameter descriptions be written as comments? onlychanged should only the parameters been written, that are changed from default?
Definition at line 2689 of file paramset.c.
References FALSE, SCIP_ParamSet::nparams, NULL, SCIP_ParamSet::params, paramWrite(), SCIP_Bool, SCIP_CALL, SCIP_FILECREATEERROR, SCIP_OKAY, SCIP_SUBVERSION, SCIP_VERSION, SCIPerrorMessage, SCIPmessageFPrintInfo(), SCIPmessagehdlrIsQuiet(), SCIPmessagehdlrSetQuiet(), and SCIPprintSysError().
Referenced by SCIPsetChgCharParam().
◆ SCIPparamsetSetToDefaults()
SCIP_RETCODE SCIPparamsetSetToDefaults | ( | SCIP_PARAMSET * | paramset, |
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr | ||
) |
installs default values for all parameters
- Parameters
-
paramset parameter set set global SCIP settings messagehdlr message handler
Definition at line 2772 of file paramset.c.
References SCIP_ParamSet::nparams, SCIP_ParamSet::params, SCIP_CALL, SCIP_OKAY, and SCIPparamSetToDefault().
Referenced by SCIPparamsetSetEmphasis(), and SCIPsetChgStringParam().
◆ SCIPparamsetSetToDefault()
SCIP_RETCODE SCIPparamsetSetToDefault | ( | SCIP_PARAMSET * | paramset, |
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr, | ||
const char * | paramname | ||
) |
installs default value for a single parameter
- Parameters
-
paramset parameter set set global SCIP settings messagehdlr message handler paramname name of the parameter
Definition at line 2790 of file paramset.c.
References SCIP_ParamSet::hashtable, NULL, paramname, SCIP_CALL, SCIP_OKAY, SCIPhashtableRetrieve(), and SCIPparamSetToDefault().
Referenced by paramsetSetHeuristicsDefault(), paramsetSetPresolvingDefault(), paramsetSetSeparatingDefault(), and SCIPsetSetCharParam().
◆ SCIPparamsetSetEmphasis()
SCIP_RETCODE SCIPparamsetSetEmphasis | ( | SCIP_PARAMSET * | paramset, |
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr, | ||
SCIP_PARAMEMPHASIS | paramemphasis, | ||
SCIP_Bool | quiet | ||
) |
sets parameters to
- SCIP_PARAMEMPHASIS_DEFAULT to use default values (see also SCIPparamsetSetToDefault())
- SCIP_PARAMEMPHASIS_COUNTER to get feasible and "fast" counting process
- SCIP_PARAMEMPHASIS_CPSOLVER to get CP like search (e.g. no LP relaxation)
- SCIP_PARAMEMPHASIS_EASYCIP to solve easy problems fast
- SCIP_PARAMEMPHASIS_FEASIBILITY to detect feasibility fast
- SCIP_PARAMEMPHASIS_HARDLP to be capable to handle hard LPs
- SCIP_PARAMEMPHASIS_OPTIMALITY to prove optimality fast
- SCIP_PARAMEMPHASIS_PHASEFEAS to find feasible solutions during a 3 phase solution process
- SCIP_PARAMEMPHASIS_PHASEIMPROVE to find improved solutions during a 3 phase solution process
- SCIP_PARAMEMPHASIS_PHASEPROOF to proof optimality during a 3 phase solution process
- SCIP_PARAMEMPHASIS_NUMERICS to solve problems which cause numerical issues
sets parameters to
- SCIP_PARAMEMPHASIS_DEFAULT to use default values (see also SCIPparamsetSetToDefault())
- SCIP_PARAMEMPHASIS_COUNTER to get feasible and "fast" counting process
- SCIP_PARAMEMPHASIS_CPSOLVER to get CP like search (e.g. no LP relaxation)
- SCIP_PARAMEMPHASIS_EASYCIP to solve easy problems fast
- SCIP_PARAMEMPHASIS_FEASIBILITY to detect feasibility fast
- SCIP_PARAMEMPHASIS_HARDLP to be capable to handle hard LPs
- SCIP_PARAMEMPHASIS_OPTIMALITY to prove optimality fast
- SCIP_PARAMEMPHASIS_PHASEFEAS to find feasible solutions during a 3 phase solution process
- SCIP_PARAMEMPHASIS_PHASEIMPROVE to find improved solutions during a 3 phase solution process
- SCIP_PARAMEMPHASIS_PHASEPROOF to proof optimality during a 3 phase solution process
- SCIP_PARAMEMPHASIS_NUMERICS to solve problems which cause numerical issues
- SCIP_PARAMEMPHASIS_BENCHMARK to not try to avoid running into memory limit
- Parameters
-
paramset parameter set set global SCIP settings messagehdlr message handler paramemphasis parameter emphasis quiet should the parameter be set quiet (no output)
Definition at line 3817 of file paramset.c.
References FALSE, h, SCIP_ParamSet::hashtable, NULL, paramname, paramSetBool(), paramSetChar(), paramSetInt(), paramSetReal(), paramsetSetHeuristicsAggressive(), paramsetSetHeuristicsFast(), paramsetSetHeuristicsOff(), paramsetSetPresolvingFast(), paramsetSetSeparatingAggressive(), paramsetSetSeparatingFast(), paramsetSetSeparatingOff(), SCIP_CALL, SCIP_INVALIDCALL, SCIP_MAXSTRLEN, SCIP_OKAY, SCIP_PARAMEMPHASIS_BENCHMARK, SCIP_PARAMEMPHASIS_COUNTER, SCIP_PARAMEMPHASIS_CPSOLVER, SCIP_PARAMEMPHASIS_DEFAULT, SCIP_PARAMEMPHASIS_EASYCIP, SCIP_PARAMEMPHASIS_FEASIBILITY, SCIP_PARAMEMPHASIS_HARDLP, SCIP_PARAMEMPHASIS_NUMERICS, SCIP_PARAMEMPHASIS_OPTIMALITY, SCIP_PARAMEMPHASIS_PHASEFEAS, SCIP_PARAMEMPHASIS_PHASEIMPROVE, SCIP_PARAMEMPHASIS_PHASEPROOF, SCIPerrorMessage, SCIPhashtableRetrieve(), SCIPheurGetName(), SCIPheurUsesSubscip(), SCIPparamsetSetToDefaults(), SCIPsetFindConshdlr(), SCIPsnprintf(), and TRUE.
Referenced by emphasisParse(), and SCIPsetSetStringParam().
◆ SCIPparamsetSetToSubscipsOff()
SCIP_RETCODE SCIPparamsetSetToSubscipsOff | ( | SCIP_PARAMSET * | paramset, |
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr, | ||
SCIP_Bool | quiet | ||
) |
sets parameters to deactivate separators and heuristics that use auxiliary SCIP instances; should be called for auxiliary SCIP instances to avoid recursion
- Parameters
-
paramset parameter set set global SCIP settings messagehdlr message handler quiet should the parameter be set quiet (no output)
Definition at line 4085 of file paramset.c.
References FALSE, NULL, paramname, paramSetInt(), SCIP_CALL, SCIP_MAXSTRLEN, SCIP_OKAY, SCIPheurGetName(), SCIPheurUsesSubscip(), SCIPmessageFPrintInfo(), SCIPparamsetFix(), SCIPparamsetGetInt(), SCIPparamsetIsFixed(), SCIPsepaGetName(), SCIPsepaUsesSubscip(), SCIPsetFindConshdlr(), SCIPsnprintf(), and TRUE.
Referenced by SCIPsetReadParams().
◆ SCIPparamsetSetHeuristics()
SCIP_RETCODE SCIPparamsetSetHeuristics | ( | SCIP_PARAMSET * | paramset, |
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr, | ||
SCIP_PARAMSETTING | paramsetting, | ||
SCIP_Bool | quiet | ||
) |
sets heuristic parameters values to
- SCIP_PARAMSETTING_DEFAULT which are the default values of all heuristic parameters
- SCIP_PARAMSETTING_FAST such that the time spend for heuristic is decreased
- SCIP_PARAMSETTING_AGGRESSIVE such that the heuristic are called more aggregative
- SCIP_PARAMSETTING_OFF which turn off all heuristics
sets heuristic parameters values to
- SCIP_PARAMSETTING_DEFAULT which are the default values of all heuristic parameters
- SCIP_PARAMSETTING_FAST such that the time spent on heuristics is decreased
- SCIP_PARAMSETTING_AGGRESSIVE such that the heuristics are called more aggressively
- SCIP_PARAMSETTING_OFF which turn off all heuristics
- Parameters
-
paramset parameter set set global SCIP settings messagehdlr message handler paramsetting parameter settings quiet should the parameter be set quiet (no output)
Definition at line 4190 of file paramset.c.
References paramsetSetHeuristicsAggressive(), paramsetSetHeuristicsDefault(), paramsetSetHeuristicsFast(), paramsetSetHeuristicsOff(), SCIP_CALL, SCIP_INVALIDCALL, SCIP_OKAY, SCIP_PARAMSETTING_AGGRESSIVE, SCIP_PARAMSETTING_DEFAULT, SCIP_PARAMSETTING_FAST, SCIP_PARAMSETTING_OFF, and SCIPerrorMessage.
Referenced by SCIPsetWriteParams().
◆ SCIPparamsetSetPresolving()
SCIP_RETCODE SCIPparamsetSetPresolving | ( | SCIP_PARAMSET * | paramset, |
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr, | ||
SCIP_PARAMSETTING | paramsetting, | ||
SCIP_Bool | quiet | ||
) |
sets presolving parameters to
- SCIP_PARAMSETTING_DEFAULT which are the default values of all presolving parameters
- SCIP_PARAMSETTING_FAST such that the time spend for presolving is decreased
- SCIP_PARAMSETTING_AGGRESSIVE such that the presolving is more aggregative
- SCIP_PARAMSETTING_OFF which turn off all presolving
sets presolving parameters to
- SCIP_PARAMSETTING_DEFAULT which are the default values of all presolving parameters
- SCIP_PARAMSETTING_FAST such that the time spent on presolving is decreased
- SCIP_PARAMSETTING_AGGRESSIVE such that the presolving is more aggressive
- SCIP_PARAMSETTING_OFF which turn off all presolving
- Parameters
-
paramset parameter set set global SCIP settings messagehdlr message handler paramsetting parameter settings quiet should the parameter be set quiet (no output)
Definition at line 4226 of file paramset.c.
References paramsetSetPresolvingAggressive(), paramsetSetPresolvingDefault(), paramsetSetPresolvingFast(), paramsetSetPresolvingOff(), SCIP_CALL, SCIP_INVALIDCALL, SCIP_OKAY, SCIP_PARAMSETTING_AGGRESSIVE, SCIP_PARAMSETTING_DEFAULT, SCIP_PARAMSETTING_FAST, SCIP_PARAMSETTING_OFF, and SCIPerrorMessage.
Referenced by SCIPsetResetParams().
◆ SCIPparamsetSetSeparating()
SCIP_RETCODE SCIPparamsetSetSeparating | ( | SCIP_PARAMSET * | paramset, |
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr, | ||
SCIP_PARAMSETTING | paramsetting, | ||
SCIP_Bool | quiet | ||
) |
sets separating parameters to
- SCIP_PARAMSETTING_DEFAULT which are the default values of all separating parameters
- SCIP_PARAMSETTING_FAST such that the time spend for separating is decreased
- SCIP_PARAMSETTING_AGGRESSIVE such that the separating is done more aggregative
- SCIP_PARAMSETTING_OFF which turn off all separating
sets separating parameters to
- SCIP_PARAMSETTING_DEFAULT which are the default values of all separating parameters
- SCIP_PARAMSETTING_FAST such that the time spent on separating is decreased
- SCIP_PARAMSETTING_AGGRESSIVE such that separating is more aggressive
- SCIP_PARAMSETTING_OFF which turn off all separating
- Parameters
-
paramset parameter set set global SCIP settings messagehdlr message handler paramsetting parameter settings quiet should the parameter be set quiet (no output)
Definition at line 4262 of file paramset.c.
References paramsetSetSeparatingAggressive(), paramsetSetSeparatingDefault(), paramsetSetSeparatingFast(), paramsetSetSeparatingOff(), SCIP_CALL, SCIP_INVALIDCALL, SCIP_OKAY, SCIP_PARAMSETTING_AGGRESSIVE, SCIP_PARAMSETTING_DEFAULT, SCIP_PARAMSETTING_FAST, SCIP_PARAMSETTING_OFF, and SCIPerrorMessage.
Referenced by SCIPsetResetParams().
◆ SCIPparamsetGetParams()
SCIP_PARAM** SCIPparamsetGetParams | ( | SCIP_PARAMSET * | paramset | ) |
returns the array of parameters
- Parameters
-
paramset parameter set
Definition at line 4293 of file paramset.c.
References NULL, and SCIP_ParamSet::params.
Referenced by SCIPsetSetEmphasis().
◆ SCIPparamsetGetNParams()
int SCIPparamsetGetNParams | ( | SCIP_PARAMSET * | paramset | ) |
returns the number of parameters in the parameter set
- Parameters
-
paramset parameter set
Definition at line 4303 of file paramset.c.
References SCIP_ParamSet::nparams, and NULL.
Referenced by SCIPsetSetSubscipsOff().
◆ SCIPparamsetCopyParams()
SCIP_RETCODE SCIPparamsetCopyParams | ( | SCIP_PARAMSET * | sourceparamset, |
SCIP_PARAMSET * | targetparamset, | ||
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr | ||
) |
copies all parameter values of the source parameter set to the corresponding parameters in the target set
copies all parameter values of the source parameter set to the corresponding parameters in the target set
by default reoptimization is disabled after copying the parameters. if you want to use reoptimization, you have to enable it explicitly.
- Parameters
-
sourceparamset source parameter set targetparamset target parameter set set global SCIP settings of target SCIP messagehdlr message handler of target SCIP
Definition at line 4317 of file paramset.c.
References FALSE, SCIP_ParamSet::hashtable, SCIP_Param::name, SCIP_ParamSet::nparams, NULL, paramCopyBool(), paramCopyChar(), paramCopyInt(), paramCopyLongint(), paramCopyReal(), paramCopyString(), paramname, SCIP_ParamSet::params, SCIP_CALL, SCIP_INVALIDDATA, SCIP_OKAY, SCIP_PARAMTYPE_BOOL, SCIP_PARAMTYPE_CHAR, SCIP_PARAMTYPE_INT, SCIP_PARAMTYPE_LONGINT, SCIP_PARAMTYPE_REAL, SCIP_PARAMTYPE_STRING, SCIPerrorMessage, SCIPhashtableRetrieve(), SCIPparamGetName(), SCIPparamGetType(), SCIPparamIsFixed(), SCIPparamSetFixed(), SCIPparamsetSetBool(), SCIPsetChgParamFixed(), SCIPsetIsParamFixed(), and SCIPsetSetReoptimizationParams().
Referenced by SCIPsetCopyPlugins().
◆ SCIPparamIsValidBool()
SCIP_Bool SCIPparamIsValidBool | ( | SCIP_PARAM * | param, |
SCIP_Bool | value | ||
) |
checks whether value of SCIP_Bool parameter is valid
checks whether value of bool parameter is valid
- Parameters
-
param parameter value value to check
Definition at line 4422 of file paramset.c.
References FALSE, NULL, and TRUE.
Referenced by SCIPisBoolParamValid().
◆ SCIPparamIsValidInt()
SCIP_Bool SCIPparamIsValidInt | ( | SCIP_PARAM * | param, |
int | value | ||
) |
checks whether value of integer parameter is valid
- Parameters
-
param parameter value value to check
Definition at line 4432 of file paramset.c.
References SCIP_Param::data, SCIP_Param::intparam, SCIP_IntParam::minvalue, and NULL.
Referenced by SCIPisIntParamValid().
◆ SCIPparamIsValidLongint()
SCIP_Bool SCIPparamIsValidLongint | ( | SCIP_PARAM * | param, |
SCIP_Longint | value | ||
) |
checks whether value of SCIP_Longint parameter is valid
- Parameters
-
param parameter value value to check
Definition at line 4443 of file paramset.c.
References SCIP_Param::data, SCIP_Param::longintparam, SCIP_LongintParam::minvalue, and NULL.
Referenced by SCIPisLongintParamValid().
◆ SCIPparamIsValidReal()
SCIP_Bool SCIPparamIsValidReal | ( | SCIP_PARAM * | param, |
SCIP_Real | value | ||
) |
checks whether value of SCIP_Real parameter is valid
- Parameters
-
param parameter value value to check
Definition at line 4454 of file paramset.c.
References SCIP_Param::data, SCIP_RealParam::minvalue, NULL, and SCIP_Param::realparam.
Referenced by SCIPisRealParamValid().
◆ SCIPparamIsValidChar()
SCIP_Bool SCIPparamIsValidChar | ( | SCIP_PARAM * | param, |
const char | value | ||
) |
checks whether value of char parameter is valid
- Parameters
-
param parameter value value to check
Definition at line 4465 of file paramset.c.
References SCIP_CharParam::allowedvalues, SCIP_Param::charparam, SCIP_Param::data, FALSE, NULL, and TRUE.
Referenced by SCIPisCharParamValid().
◆ SCIPparamIsValidString()
SCIP_Bool SCIPparamIsValidString | ( | SCIP_PARAM * | param, |
const char * | value | ||
) |
checks whether value of string parameter is valid
- Parameters
-
param parameter value value to check
Definition at line 4491 of file paramset.c.
References FALSE, NULL, and TRUE.
Referenced by SCIPisStringParamValid().
◆ SCIPparamSetBool()
SCIP_RETCODE SCIPparamSetBool | ( | SCIP_PARAM * | param, |
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr, | ||
SCIP_Bool | value, | ||
SCIP_Bool | initialize, | ||
SCIP_Bool | quiet | ||
) |
sets value of SCIP_Bool parameter
- Parameters
-
param parameter set global SCIP settings, or NULL if param change method should not be called messagehdlr message handler value new value of the parameter initialize is this the initialization of the parameter? quiet should the parameter be set quiet (no output)
Definition at line 4509 of file paramset.c.
References SCIP_Param::boolparam, SCIP_BoolParam::curvalue, SCIP_Param::data, FALSE, NULL, paramTestBool(), paramTestFixed(), paramWrite(), SCIP_Bool, SCIP_CALL, SCIP_CALL_QUIET, SCIP_OKAY, SCIP_PARAMETERWRONGVAL, SCIPparamGetBool(), TRUE, and SCIP_BoolParam::valueptr.
Referenced by paramCopyBool(), paramCreateBool(), paramParseBool(), paramSetBool(), SCIPparamsetSetBool(), and SCIPparamSetToDefault().
◆ SCIPparamSetInt()
SCIP_RETCODE SCIPparamSetInt | ( | SCIP_PARAM * | param, |
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr, | ||
int | value, | ||
SCIP_Bool | initialize, | ||
SCIP_Bool | quiet | ||
) |
sets value of int parameter
- Parameters
-
param parameter set global SCIP settings, or NULL if param change method should not be called messagehdlr message handler value new value of the parameter initialize is this the initialization of the parameter? quiet should the parameter be set quiet (no output)
Definition at line 4571 of file paramset.c.
References SCIP_IntParam::curvalue, SCIP_Param::data, FALSE, SCIP_Param::intparam, NULL, paramTestFixed(), paramTestInt(), paramWrite(), SCIP_CALL, SCIP_CALL_QUIET, SCIP_OKAY, SCIP_PARAMETERWRONGVAL, SCIPparamGetInt(), TRUE, and SCIP_IntParam::valueptr.
Referenced by paramCopyInt(), paramCreateInt(), paramParseInt(), paramSetInt(), SCIPparamsetSetInt(), SCIPparamSetToDefault(), and SCIPsetGetStringParam().
◆ SCIPparamSetLongint()
SCIP_RETCODE SCIPparamSetLongint | ( | SCIP_PARAM * | param, |
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr, | ||
SCIP_Longint | value, | ||
SCIP_Bool | initialize, | ||
SCIP_Bool | quiet | ||
) |
sets value of SCIP_Longint parameter
- Parameters
-
param parameter set global SCIP settings, or NULL if param change method should not be called messagehdlr message handler value new value of the parameter initialize is this the initialization of the parameter? quiet should the parameter be set quiet (no output)
Definition at line 4633 of file paramset.c.
References SCIP_LongintParam::curvalue, SCIP_Param::data, FALSE, SCIP_Param::longintparam, NULL, paramTestFixed(), paramTestLongint(), paramWrite(), SCIP_CALL, SCIP_CALL_QUIET, SCIP_Longint, SCIP_OKAY, SCIP_PARAMETERWRONGVAL, SCIPparamGetLongint(), TRUE, and SCIP_LongintParam::valueptr.
Referenced by paramCopyLongint(), paramCreateLongint(), paramParseLongint(), paramSetLongint(), SCIPparamsetSetLongint(), and SCIPparamSetToDefault().
◆ SCIPparamSetReal()
SCIP_RETCODE SCIPparamSetReal | ( | SCIP_PARAM * | param, |
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr, | ||
SCIP_Real | value, | ||
SCIP_Bool | initialize, | ||
SCIP_Bool | quiet | ||
) |
sets value of SCIP_Real parameter
- Parameters
-
param parameter set global SCIP settings, or NULL if param change method should not be called messagehdlr message handler value new value of the parameter initialize is this the initialization of the parameter? quiet should the parameter be set quiet (no output)
Definition at line 4695 of file paramset.c.
References SCIP_RealParam::curvalue, SCIP_Param::data, FALSE, MAX, NULL, paramTestFixed(), paramTestReal(), paramWrite(), SCIP_Param::realparam, SCIP_CALL, SCIP_CALL_QUIET, SCIP_OKAY, SCIP_PARAMETERWRONGVAL, SCIP_Real, SCIP_REAL_MAX, SCIP_REAL_MIN, SCIPparamGetReal(), TRUE, and SCIP_RealParam::valueptr.
Referenced by paramCopyReal(), paramCreateReal(), paramParseReal(), paramSetReal(), SCIPparamsetSetReal(), and SCIPparamSetToDefault().
◆ SCIPparamSetChar()
SCIP_RETCODE SCIPparamSetChar | ( | SCIP_PARAM * | param, |
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr, | ||
char | value, | ||
SCIP_Bool | initialize, | ||
SCIP_Bool | quiet | ||
) |
sets value of char parameter
- Parameters
-
param parameter set global SCIP settings, or NULL if param change method should not be called messagehdlr message handler value new value of the parameter initialize is this the initialization of the parameter? quiet should the parameter be set quiet (no output)
Definition at line 4759 of file paramset.c.
References SCIP_Param::charparam, SCIP_CharParam::curvalue, SCIP_Param::data, FALSE, NULL, paramTestChar(), paramTestFixed(), paramWrite(), SCIP_CALL, SCIP_CALL_QUIET, SCIP_OKAY, SCIP_PARAMETERWRONGVAL, SCIPparamGetChar(), TRUE, and SCIP_CharParam::valueptr.
Referenced by paramCopyChar(), paramCreateChar(), paramParseChar(), paramSetChar(), SCIPparamsetSetChar(), SCIPparamSetToDefault(), and SCIPsetChgLongintParam().
◆ SCIPparamSetString()
SCIP_RETCODE SCIPparamSetString | ( | SCIP_PARAM * | param, |
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr, | ||
const char * | value, | ||
SCIP_Bool | initialize, | ||
SCIP_Bool | quiet | ||
) |
sets value of string parameter
- Parameters
-
param parameter set global SCIP settings, or NULL if param change method should not be called messagehdlr message handler value new value of the parameter initialize is this the initialization of the parameter? quiet should the parameter be set quiet (no output)
Definition at line 4820 of file paramset.c.
References BMSduplicateMemoryArray, BMSfreeMemoryArrayNull, SCIP_StringParam::curvalue, SCIP_Param::data, FALSE, NULL, paramTestFixed(), paramTestString(), paramWrite(), SCIP_ALLOC, SCIP_CALL, SCIP_CALL_QUIET, SCIP_OKAY, SCIP_PARAMETERWRONGVAL, SCIP_Param::stringparam, TRUE, and SCIP_StringParam::valueptr.
Referenced by paramCopyString(), paramCreateString(), paramParseString(), SCIPparamsetSetString(), SCIPparamSetToDefault(), and SCIPsetChgRealParam().
◆ SCIPparamSetDefaultBool()
void SCIPparamSetDefaultBool | ( | SCIP_PARAM * | param, |
SCIP_Bool | defaultvalue | ||
) |
sets default value of SCIP_Bool parameter
changes default value of SCIP_Bool parameter
- Parameters
-
param parameter defaultvalue new default value
Definition at line 4891 of file paramset.c.
References SCIP_Param::boolparam, SCIP_Param::data, SCIP_BoolParam::defaultvalue, NULL, SCIP_Param::paramtype, and SCIP_PARAMTYPE_BOOL.
Referenced by SCIPparamsetSetDefaultBool().
◆ SCIPparamSetDefaultInt()
void SCIPparamSetDefaultInt | ( | SCIP_PARAM * | param, |
int | defaultvalue | ||
) |
sets default value of int parameter
changes default value of int parameter
- Parameters
-
param parameter defaultvalue new default value
Definition at line 4903 of file paramset.c.
References SCIP_Param::data, SCIP_IntParam::defaultvalue, SCIP_Param::intparam, SCIP_IntParam::maxvalue, SCIP_IntParam::minvalue, NULL, SCIP_Param::paramtype, and SCIP_PARAMTYPE_INT.
Referenced by SCIPparamsetSetDefaultInt().
◆ SCIPparamSetDefaultLongint()
void SCIPparamSetDefaultLongint | ( | SCIP_PARAM * | param, |
SCIP_Longint | defaultvalue | ||
) |
sets default value of SCIP_Longint parameter
- Parameters
-
param parameter defaultvalue new default value
Definition at line 4917 of file paramset.c.
References SCIP_Param::data, SCIP_LongintParam::defaultvalue, SCIP_Param::longintparam, SCIP_LongintParam::maxvalue, SCIP_LongintParam::minvalue, NULL, SCIP_Param::paramtype, and SCIP_PARAMTYPE_LONGINT.
Referenced by SCIPparamsetSetDefaultLongint().
◆ SCIPparamSetDefaultReal()
void SCIPparamSetDefaultReal | ( | SCIP_PARAM * | param, |
SCIP_Real | defaultvalue | ||
) |
sets default value of SCIP_Real parameter
- Parameters
-
param parameter defaultvalue new default value
Definition at line 4931 of file paramset.c.
References SCIP_Param::data, SCIP_RealParam::defaultvalue, SCIP_RealParam::maxvalue, SCIP_RealParam::minvalue, NULL, SCIP_Param::paramtype, SCIP_Param::realparam, and SCIP_PARAMTYPE_REAL.
Referenced by SCIPparamsetSetDefaultReal().
◆ SCIPparamSetDefaultChar()
void SCIPparamSetDefaultChar | ( | SCIP_PARAM * | param, |
char | defaultvalue | ||
) |
sets default value of char parameter
- Parameters
-
param parameter defaultvalue new default value
Definition at line 4945 of file paramset.c.
References SCIP_Param::charparam, SCIP_Param::data, SCIP_CharParam::defaultvalue, NULL, SCIP_Param::paramtype, and SCIP_PARAMTYPE_CHAR.
Referenced by SCIPparamsetSetDefaultChar().
◆ SCIPparamSetDefaultString()
void SCIPparamSetDefaultString | ( | SCIP_PARAM * | param, |
const char * | defaultvalue | ||
) |
sets default value of string parameter
- Parameters
-
param parameter defaultvalue new default value
Definition at line 4957 of file paramset.c.
References BMSduplicateMemoryArray, BMSfreeMemoryArray, SCIP_Param::data, SCIP_StringParam::defaultvalue, NULL, SCIP_Param::paramtype, SCIP_ALLOC_ABORT, SCIP_PARAMTYPE_STRING, and SCIP_Param::stringparam.
Referenced by SCIPparamsetSetDefaultString().
◆ SCIPparamSetToDefault()
SCIP_RETCODE SCIPparamSetToDefault | ( | SCIP_PARAM * | param, |
SCIP_SET * | set, | ||
SCIP_MESSAGEHDLR * | messagehdlr | ||
) |
sets the parameter to its default setting
- Parameters
-
param parameter set global SCIP settings messagehdlr message handler
Definition at line 4970 of file paramset.c.
References FALSE, SCIP_Param::name, NULL, SCIP_Param::paramtype, SCIP_CALL, SCIP_INVALIDDATA, SCIP_OKAY, SCIP_PARAMTYPE_BOOL, SCIP_PARAMTYPE_CHAR, SCIP_PARAMTYPE_INT, SCIP_PARAMTYPE_LONGINT, SCIP_PARAMTYPE_REAL, SCIP_PARAMTYPE_STRING, SCIPerrorMessage, SCIPparamGetBoolDefault(), SCIPparamGetCharDefault(), SCIPparamGetIntDefault(), SCIPparamGetLongintDefault(), SCIPparamGetRealDefault(), SCIPparamGetStringDefault(), SCIPparamIsFixed(), SCIPparamSetBool(), SCIPparamSetChar(), SCIPparamSetInt(), SCIPparamSetLongint(), SCIPparamSetReal(), SCIPparamSetString(), SCIPsetDebugMsg, and TRUE.
Referenced by SCIPparamsetSetToDefault(), and SCIPparamsetSetToDefaults().
◆ SCIPparamWrite()
SCIP_RETCODE SCIPparamWrite | ( | SCIP_PARAM * | param, |
SCIP_MESSAGEHDLR * | messagehdlr, | ||
const char * | filename, | ||
SCIP_Bool | comments, | ||
SCIP_Bool | onlychanged | ||
) |
writes a single parameter to a file
- Parameters
-
param parameter messagehdlr message handler filename file name, or NULL for stdout comments should parameter descriptions be written as comments? onlychanged should only the parameters been written, that are changed from default?
Definition at line 5021 of file paramset.c.
References NULL, paramWrite(), SCIP_CALL, SCIP_FILECREATEERROR, SCIP_OKAY, SCIPerrorMessage, and SCIPprintSysError().
Referenced by SCIPwriteParam().