reader_lp.c

Go to the documentation of this file.

/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/*                                                                           */
/*                  This file is part of the program and library             */
/*         SCIP --- Solving Constraint Integer Programs                      */
/*                                                                           */
/*  Copyright (c) 2002-2024 Zuse Institute Berlin (ZIB)                      */
/*                                                                           */
/*  Licensed under the Apache License, Version 2.0 (the "License");          */
/*  you may not use this file except in compliance with the License.         */
/*  You may obtain a copy of the License at                                  */
/*                                                                           */
/*      http://www.apache.org/licenses/LICENSE-2.0                           */
/*                                                                           */
/*  Unless required by applicable law or agreed to in writing, software      */
/*  distributed under the License is distributed on an "AS IS" BASIS,        */
/*  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. */
/*  See the License for the specific language governing permissions and      */
/*  limitations under the License.                                           */
/*                                                                           */
/*  You should have received a copy of the Apache-2.0 license                */
/*  along with SCIP; see the file LICENSE. If not visit scipopt.org.         */
/*                                                                           */
/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */

/**@file   reader_lp.c
 * @ingroup DEFPLUGINS_READER
 * @brief  LP file reader
 * @author Tobias Achterberg
 * @author Marc Pfetsch
 * @author Stefan Heinz
 * @author Stefan Vigerske
 * @author Michael Winkler
 * @author Lars Schewe
 *
 * @todo write fixed (non-active) variables, e.g., for transformed problem
 */

/*---+----1----+----2----+----3----+----4----+----5----+----6----+----7----+----8----+----9----+----0----+----1----+----2*/

#include "blockmemshell/memory.h"
#include <ctype.h>
#include "scip/cons_and.h"
#include "scip/cons_bounddisjunction.h"
#include "scip/cons_nonlinear.h"
#include "scip/cons_indicator.h"
#include "scip/cons_knapsack.h"
#include "scip/cons_linear.h"
#include "scip/cons_logicor.h"
#include "scip/cons_setppc.h"
#include "scip/cons_sos1.h"
#include "scip/cons_sos2.h"
#include "scip/cons_varbound.h"
#include "scip/pub_cons.h"
#include "scip/pub_fileio.h"
#include "scip/pub_message.h"
#include "scip/pub_misc.h"
#include "scip/pub_reader.h"
#include "scip/pub_var.h"
#include "scip/reader_lp.h"
#include "scip/scip_cons.h"
#include "scip/scip_mem.h"
#include "scip/scip_message.h"
#include "scip/scip_numerics.h"
#include "scip/scip_param.h"
#include "scip/scip_prob.h"
#include "scip/scip_reader.h"
#include "scip/scip_var.h"
#include <stdlib.h>
#include <string.h>

#if !defined(_WIN32) && !defined(_WIN64)
#include <strings.h> /*lint --e{766}*/ /* needed for strncasecmp() */
#endif


#define READER_NAME             "lpreader"
#define READER_DESC             "file reader for MIPs in IBM CPLEX's LP file format"
#define READER_EXTENSION        "lp"

#define DEFAULT_LINEARIZE_ANDS         TRUE  /**< Should possible \"and\"-constraints be linearized when writing the lp file? */
#define DEFAULT_AGGRLINEARIZATION_ANDS TRUE  /**< Should an aggregated linearization for and constraints be used? */

/*
 * Data structures
 */

#define LP_MAX_LINELEN         65536
#define LP_MAX_PUSHEDTOKENS        2
#define LP_INIT_COEFSSIZE       8192
#define LP_INIT_QUADCOEFSSIZE     16
#define LP_MAX_PRINTLEN          561         /**< the maximum length of any line is 560 + '\\0' = 561*/
#define LP_MAX_NAMELEN           256         /**< the maximum length for any name is 255 + '\\0' = 256 */
#define LP_PRINTLEN              100


/** LP reading data */
struct SCIP_ReaderData
{
   SCIP_Bool             linearizeands;
   SCIP_Bool             aggrlinearizationands;
};


/** Section in LP File */
enum LpSection
{
   LP_START, LP_OBJECTIVE, LP_CONSTRAINTS, LP_BOUNDS, LP_GENERALS, LP_BINARIES, LP_SEMICONTINUOUS, LP_SOS, LP_END
};
typedef enum LpSection LPSECTION;

enum LpExpType
{
   LP_EXP_NONE, LP_EXP_UNSIGNED, LP_EXP_SIGNED
};
typedef enum LpExpType LPEXPTYPE;

enum LpSense
{
   LP_SENSE_NOTHING, LP_SENSE_LE, LP_SENSE_GE, LP_SENSE_EQ
};
typedef enum LpSense LPSENSE;

/** LP reading data */
struct LpInput
{
   SCIP_FILE*            file;
   char*                 linebuf;
   char                  probname[LP_MAX_LINELEN];
   char                  objname[LP_MAX_LINELEN];
   char*                 token;
   char*                 tokenbuf;
   char*                 pushedtokens[LP_MAX_PUSHEDTOKENS];
   int                   npushedtokens;
   int                   linenumber;
   int                   linepos;
   int                   linebufsize;
   LPSECTION             section;
   SCIP_OBJSENSE         objsense;
   SCIP_Bool             inlazyconstraints;  /**< whether we are currently reading the section for lazy constraints */
   SCIP_Bool             inusercuts;         /**< whether we are currently reading the section for user cuts */
   SCIP_Bool             initialconss;       /**< should model constraints be marked as initial? */
   SCIP_Bool             dynamicconss;       /**< should model constraints be subject to aging? */
   SCIP_Bool             dynamiccols;        /**< should columns be added and removed dynamically to the LP? */
   SCIP_Bool             dynamicrows;        /**< should rows be added and removed dynamically to the LP? */
   SCIP_Bool             haserror;
};
typedef struct LpInput LPINPUT;

static const char commentchars[] = "\\";


/*
 * Local methods (for reading)
 */

/** issues an error message and marks the LP data to have errors */
static
void syntaxError(
   SCIP*                 scip,               /**< SCIP data structure */
   LPINPUT*              lpinput,            /**< LP reading data */
   const char*           msg                 /**< error message */
   )
{
   char formatstr[256];

   assert(lpinput != NULL);

   SCIPerrorMessage("Syntax error in line %d ('%s'): %s \n", lpinput->linenumber, lpinput->token, msg);
   if( lpinput->linebuf[lpinput->linebufsize - 1] == '\n' )
   {
      SCIPverbMessage(scip, SCIP_VERBLEVEL_MINIMAL, NULL, "  input: %s", lpinput->linebuf);
   }
   else
   {
      SCIPverbMessage(scip, SCIP_VERBLEVEL_MINIMAL, NULL, "  input: %s\n", lpinput->linebuf);
   }
   (void) SCIPsnprintf(formatstr, 256, "         %%%ds\n", lpinput->linepos);
   SCIPverbMessage(scip, SCIP_VERBLEVEL_MINIMAL, NULL, (const char*)formatstr, "^");
   lpinput->section  = LP_END;
   lpinput->haserror = TRUE;
}

/** returns whether a syntax error was detected */
static
SCIP_Bool hasError(
   LPINPUT*              lpinput             /**< LP reading data */
   )
{
   assert(lpinput != NULL);

   return lpinput->haserror;
}

/** returns whether the given character is a token delimiter */
static
SCIP_Bool isDelimChar(
   char                  c                   /**< input character */
   )
{
   switch (c)
   {
   case ' ':
   case '\f':
   case '\n':
   case '\r':
   case '\t':
   case '\v':
   case '\0':
      return TRUE;
   default:
      return FALSE;
   }
}

/** returns whether the given character is a single token */
static
SCIP_Bool isTokenChar(
   char                  c                   /**< input character */
   )
{
   switch (c)
   {
   case '-':
   case '+':
   case ':':
   case '<':
   case '>':
   case '=':
   case '[':
   case ']':
   case '*':
   case '^':
      return TRUE;
   default:
      return FALSE;
   }
}

/** returns whether the current character is member of a value string */
static
SCIP_Bool isValueChar(
   char                  c,                  /**< input character */
   char                  nextc,              /**< next input character */
   SCIP_Bool             firstchar,          /**< is the given character the first char of the token? */
   SCIP_Bool*            hasdot,             /**< pointer to update the dot flag */
   LPEXPTYPE*            exptype             /**< pointer to update the exponent type */
   )
{
   assert(hasdot != NULL);
   assert(exptype != NULL);

   if( isdigit((unsigned char)c) )
      return TRUE;
   else if( (*exptype == LP_EXP_NONE) && !(*hasdot) && (c == '.') && ( isdigit((unsigned char)nextc) || isspace((unsigned char)nextc) || nextc == 'e' || nextc == 'E') )
   {  /* note: we allow for numbers like "24311." for which the next character should be a space or exponent sign */
      *hasdot = TRUE;
      return TRUE;
   }
   else if( !firstchar && (*exptype == LP_EXP_NONE) && (c == 'e' || c == 'E') )
   {
      if( nextc == '+' || nextc == '-' )
      {
         *exptype = LP_EXP_SIGNED;
         return TRUE;
      }
      else if( isdigit((unsigned char)nextc) )
      {
         *exptype = LP_EXP_UNSIGNED;
         return TRUE;
      }
   }
   else if( (*exptype == LP_EXP_SIGNED) && (c == '+' || c == '-') )
   {
      *exptype = LP_EXP_UNSIGNED;
      return TRUE;
   }

   return FALSE;
}

/** reads the next line from the input file into the line buffer; skips comments;
 *  returns whether a line could be read
 */
static
SCIP_Bool getNextLine(
   SCIP*                 scip,               /**< SCIP data structure */
   LPINPUT*              lpinput             /**< LP reading data */
   )
{
   int i;

   assert(lpinput != NULL);

   /* read next line */
   lpinput->linepos = 0;
   lpinput->linebuf[lpinput->linebufsize - 2] = '\0';

   if( SCIPfgets(lpinput->linebuf, lpinput->linebufsize, lpinput->file) == NULL )
   {
      /* clear the line, this is really necessary here! */
      BMSclearMemoryArray(lpinput->linebuf, lpinput->linebufsize);

      return FALSE;
   }

   lpinput->linenumber++;

   /* if line is too long for our buffer reallocate buffer */
   while( lpinput->linebuf[lpinput->linebufsize - 2] != '\0' )
   {
      int newsize;

      newsize = SCIPcalcMemGrowSize(scip, lpinput->linebufsize + 1);
      SCIP_CALL_ABORT( SCIPreallocBlockMemoryArray(scip, &lpinput->linebuf, lpinput->linebufsize, newsize) );

      lpinput->linebuf[newsize-2] = '\0';
      if ( SCIPfgets(lpinput->linebuf + lpinput->linebufsize - 1, newsize - lpinput->linebufsize + 1, lpinput->file) == NULL )
         return FALSE;
      lpinput->linebufsize = newsize;
   }
   lpinput->linebuf[lpinput->linebufsize - 1] = '\0'; /* we want to use lookahead of one char -> we need two \0 at the end */

   /* skip characters after comment symbol */
   for( i = 0; commentchars[i] != '\0'; ++i )
   {
      char* commentstart;

      commentstart = strchr(lpinput->linebuf, commentchars[i]);
      if( commentstart != NULL )
      {
         *commentstart = '\0';
         *(commentstart+1) = '\0'; /* we want to use lookahead of one char -> we need two \0 at the end */

         break;
      }
   }

   return TRUE;
}

/** swaps the addresses of two pointers */
static
void swapPointers(
   char**                pointer1,           /**< first pointer */
   char**                pointer2            /**< second pointer */
   )
{
   char* tmp;

   tmp = *pointer1;
   *pointer1 = *pointer2;
   *pointer2 = tmp;
}

/** reads the next token from the input file into the token buffer; returns whether a token was read */
static
SCIP_Bool getNextToken(
   SCIP*                 scip,               /**< SCIP data structure */
   LPINPUT*              lpinput             /**< LP reading data */
   )
{
   SCIP_Bool hasdot;
   LPEXPTYPE exptype;
   char* buf;
   int tokenlen;

   assert(lpinput != NULL);
   assert(lpinput->linepos < lpinput->linebufsize);

   /* check the token stack */
   if( lpinput->npushedtokens > 0 )
   {
      swapPointers(&lpinput->token, &lpinput->pushedtokens[lpinput->npushedtokens-1]);
      lpinput->npushedtokens--;

      SCIPdebugMsg(scip, "(line %d) read token again: '%s'\n", lpinput->linenumber, lpinput->token);
      return TRUE;
   }

   /* skip delimiters */
   buf = lpinput->linebuf;
   while( isDelimChar(buf[lpinput->linepos]) )
   {
      if( buf[lpinput->linepos] == '\0' )
      {
         if( !getNextLine(scip, lpinput) )
         {
            lpinput->section = LP_END;
            SCIPdebugMsg(scip, "(line %d) end of file\n", lpinput->linenumber);
            return FALSE;
         }
         assert(lpinput->linepos == 0);
         /* update buf, because the linebuffer may have been reallocated */
         buf = lpinput->linebuf;
      }
      else
         lpinput->linepos++;
   }
   assert(lpinput->linepos < lpinput->linebufsize);
   assert(!isDelimChar(buf[lpinput->linepos]));

   /* check if the token is a value */
   hasdot = FALSE;
   exptype = LP_EXP_NONE;
   if( isValueChar(buf[lpinput->linepos], buf[lpinput->linepos+1], TRUE, &hasdot, &exptype) )
   {
      /* read value token */
      tokenlen = 0;
      do
      {
         assert(tokenlen < LP_MAX_LINELEN);
         assert(!isDelimChar(buf[lpinput->linepos]));
         lpinput->token[tokenlen] = buf[lpinput->linepos];
         tokenlen++;
         lpinput->linepos++;
      }
      while( isValueChar(buf[lpinput->linepos], buf[lpinput->linepos+1], FALSE, &hasdot, &exptype) );
   }
   else
   {
      /* read non-value token */
      tokenlen = 0;
      do
      {
         assert(tokenlen < LP_MAX_LINELEN);
         lpinput->token[tokenlen] = buf[lpinput->linepos];
         tokenlen++;
         lpinput->linepos++;
         if( tokenlen == 1 && isTokenChar(lpinput->token[0]) )
            break;
      }
      while( !isDelimChar(buf[lpinput->linepos]) && !isTokenChar(buf[lpinput->linepos]) );

      /* if the token is a power sign '^', skip a following '2'
       * if the token is an equation sense '<', '>', or '=', skip a following '='
       * if the token is an equality token '=' and the next character is a '<' or '>', replace the token by the inequality sense
       */
      if( tokenlen >= 1 && lpinput->token[tokenlen-1] == '^' && buf[lpinput->linepos] == '2' )
      {
         lpinput->linepos++;
      }
      if( tokenlen >= 1
         && (lpinput->token[tokenlen-1] == '<' || lpinput->token[tokenlen-1] == '>' || lpinput->token[tokenlen-1] == '=')
         && buf[lpinput->linepos] == '=' )
      {
         lpinput->linepos++;
      }
      else if( lpinput->token[tokenlen-1] == '=' && (buf[lpinput->linepos] == '<' || buf[lpinput->linepos] == '>') )
      {
         lpinput->token[tokenlen-1] = buf[lpinput->linepos];
         lpinput->linepos++;
      }
   }
   assert(tokenlen < LP_MAX_LINELEN);
   lpinput->token[tokenlen] = '\0';

   SCIPdebugMsg(scip, "(line %d) read token: '%s'\n", lpinput->linenumber, lpinput->token);

   return TRUE;
}

/** puts the current token on the token stack, such that it is read at the next call to getNextToken() */
static
void pushToken(
   LPINPUT*              lpinput             /**< LP reading data */
   )
{
   assert(lpinput != NULL);
   assert(lpinput->npushedtokens < LP_MAX_PUSHEDTOKENS);

   swapPointers(&lpinput->pushedtokens[lpinput->npushedtokens], &lpinput->token);
   lpinput->npushedtokens++;
}

/** puts the buffered token on the token stack, such that it is read at the next call to getNextToken() */
static
void pushBufferToken(
   LPINPUT*              lpinput             /**< LP reading data */
   )
{
   assert(lpinput != NULL);
   assert(lpinput->npushedtokens < LP_MAX_PUSHEDTOKENS);

   swapPointers(&lpinput->pushedtokens[lpinput->npushedtokens], &lpinput->tokenbuf);
   lpinput->npushedtokens++;
}

/** swaps the current token with the token buffer */
static
void swapTokenBuffer(
   LPINPUT*              lpinput             /**< LP reading data */
   )
{
   assert(lpinput != NULL);

   swapPointers(&lpinput->token, &lpinput->tokenbuf);
}

/** checks whether the current token is a section identifier, and if yes, switches to the corresponding section */
static
SCIP_Bool isNewSection(
   SCIP*                 scip,               /**< SCIP data structure */
   LPINPUT*              lpinput             /**< LP reading data */
   )
{
   SCIP_Bool iscolon;
   size_t len;

   assert(lpinput != NULL);

   /* remember first token by swapping the token buffer */
   swapTokenBuffer(lpinput);

   /* look at next token: if this is a ':', the first token is a name and no section keyword */
   iscolon = FALSE;
   if( getNextToken(scip, lpinput) )
   {
      iscolon = (*lpinput->token == ':');
      pushToken(lpinput);
   }

   /* reinstall the previous token by swapping back the token buffer */
   swapTokenBuffer(lpinput);

   /* check for ':' */
   if( iscolon )
      return FALSE;

   len = strlen(lpinput->token);
   assert(len < LP_MAX_LINELEN);

   /* the section keywords are at least 2 characters up to 8 or exactly 15 characters long */
   if( len > 1 && (len < 9 || len == 15) )
   {
      char token[16];
      int c = 0;

      while( lpinput->token[c] != '\0' )
      {
         token[c] = toupper(lpinput->token[c]); /*lint !e734*/
         ++c;
         assert(c < 16);
      }
      token[c] = '\0';

      if( (len == 3 && strcmp(token, "MIN") == 0)
         || (len == 7 && strcmp(token, "MINIMUM") == 0)
         || (len == 8 && strcmp(token, "MINIMIZE") == 0) )
      {
         SCIPdebugMsg(scip, "(line %d) new section: OBJECTIVE\n", lpinput->linenumber);
         lpinput->section = LP_OBJECTIVE;
         lpinput->objsense = SCIP_OBJSENSE_MINIMIZE;
         return TRUE;
      }

      if( (len == 3 && strcmp(token, "MAX") == 0)
         || (len == 7 && strcmp(token, "MAXIMUM") == 0)
         || (len == 8 && strcmp(token, "MAXIMIZE") == 0) )
      {
         SCIPdebugMsg(scip, "(line %d) new section: OBJECTIVE\n", lpinput->linenumber);
         lpinput->section = LP_OBJECTIVE;
         lpinput->objsense = SCIP_OBJSENSE_MAXIMIZE;
         return TRUE;
      }

      if( len == 7 && strcmp(token, "SUBJECT") == 0 )
      {
         /* check if the next token is 'TO' */
         swapTokenBuffer(lpinput);
         if( getNextToken(scip, lpinput) )
         {
            if( strcasecmp(lpinput->token, "TO") == 0 )
            {
               SCIPdebugMsg(scip, "(line %d) new section: CONSTRAINTS\n", lpinput->linenumber);
               lpinput->section = LP_CONSTRAINTS;
               lpinput->inlazyconstraints = FALSE;
               lpinput->inusercuts = FALSE;
               return TRUE;
            }
            else
               pushToken(lpinput);
         }
         swapTokenBuffer(lpinput);
      }

      if( len == 4 && strcmp(token, "SUCH") == 0 )
      {
         /* check if the next token is 'THAT' */
         swapTokenBuffer(lpinput);
         if( getNextToken(scip, lpinput) )
         {
            if( strcasecmp(lpinput->token, "THAT") == 0 )
            {
               SCIPdebugMsg(scip, "(line %d) new section: CONSTRAINTS\n", lpinput->linenumber);
               lpinput->section = LP_CONSTRAINTS;
               lpinput->inlazyconstraints = FALSE;
               lpinput->inusercuts = FALSE;
               return TRUE;
            }
            else
               pushToken(lpinput);
         }
         swapTokenBuffer(lpinput);
      }

      if( (len == 2 && strcmp(token, "ST") == 0)
         || (len == 3 && strcmp(token, "ST.") == 0)
         || (len == 4 && strcmp(token, "S.T.") == 0) )
      {
         SCIPdebugMsg(scip, "(line %d) new section: CONSTRAINTS\n", lpinput->linenumber);
         lpinput->section = LP_CONSTRAINTS;
         lpinput->inlazyconstraints = FALSE;
         lpinput->inusercuts = FALSE;
         return TRUE;
      }

      if( len == 4 && strcmp(token, "LAZY") == 0 )
      {
         /* check if the next token is 'CONSTRAINTS' */
         swapTokenBuffer(lpinput);
         if( getNextToken(scip, lpinput) )
         {
            if( strcasecmp(lpinput->token, "CONSTRAINTS") == 0 )
            {
               SCIPdebugMsg(scip, "(line %d) new section: CONSTRAINTS (lazy)\n", lpinput->linenumber);
               lpinput->section = LP_CONSTRAINTS;
               lpinput->inlazyconstraints = TRUE;
               lpinput->inusercuts = FALSE;
               return TRUE;
            }
            else
               pushToken(lpinput);
         }
         swapTokenBuffer(lpinput);
      }

      if( len == 4 && strcmp(token, "USER") == 0 )
      {
         /* check if the next token is 'CUTS' */
         swapTokenBuffer(lpinput);
         if( getNextToken(scip, lpinput) )
         {
            if( strcasecmp(lpinput->token, "CUTS") == 0 )
            {
               SCIPdebugMsg(scip, "(line %d) new section: CONSTRAINTS (user cuts)\n", lpinput->linenumber);
               lpinput->section = LP_CONSTRAINTS;
               lpinput->inlazyconstraints = FALSE;
               lpinput->inusercuts = TRUE;
               return TRUE;
            }
            else
               pushToken(lpinput);
         }
         swapTokenBuffer(lpinput);
      }

      if( (len == 5 && strcmp(token, "BOUND") == 0)
         || (len == 6 && strcmp(token, "BOUNDS") == 0) )
      {
         SCIPdebugMsg(scip, "(line %d) new section: BOUNDS\n", lpinput->linenumber);
         lpinput->section = LP_BOUNDS;
         return TRUE;
      }

      if( (len == 3 && (strcmp(token, "GEN") == 0 || strcmp(token, "INT") == 0))
         || (len == 7 && (strcmp(token, "GENERAL") == 0 || strcmp(token, "INTEGER") == 0))
         || (len == 8 && (strcmp(token, "GENERALS") == 0 || strcmp(token, "INTEGERS") == 0)) )
      {
         SCIPdebugMsg(scip, "(line %d) new section: GENERALS\n", lpinput->linenumber);
         lpinput->section = LP_GENERALS;
         return TRUE;
      }

      if( (len == 3 && strcmp(token, "BIN") == 0)
         || (len == 6 && strcmp(token, "BINARY") == 0)
         || (len == 8 && strcmp(token, "BINARIES") == 0) )
      {
         SCIPdebugMsg(scip, "(line %d) new section: BINARIES\n", lpinput->linenumber);
         lpinput->section = LP_BINARIES;
         return TRUE;
      }

      if( (len == 4 && strcmp(token, "SEMI") == 0)
         || (len == 5 && strcmp(token, "SEMIS") == 0)
         || (len == 15 && strcmp(token, "SEMI-CONTINUOUS") == 0) )
      {
         SCIPdebugMsg(scip, "(line %d) new section: SEMICONTINUOUS\n", lpinput->linenumber);
         lpinput->section = LP_SEMICONTINUOUS;
         return TRUE;
      }

      if( len == 3 && strcmp(token, "SOS") == 0 )
      {
         SCIPdebugMsg(scip, "(line %d) new section: SOS\n", lpinput->linenumber);
         lpinput->section = LP_SOS;
         return TRUE;
      }

      if( len == 3 && strcmp(token, "END") == 0 )
      {
         SCIPdebugMsg(scip, "(line %d) new section: END\n", lpinput->linenumber);
         lpinput->section = LP_END;
         return TRUE;
      }
   }

   return FALSE;
}

/** returns whether the current token is a sign */
static
SCIP_Bool isSign(
   LPINPUT*              lpinput,            /**< LP reading data */
   int*                  sign                /**< pointer to update the sign */
   )
{
   assert(lpinput != NULL);
   assert(sign != NULL);
   assert(*sign == +1 || *sign == -1);

   if( lpinput->token[1] == '\0' )
   {
      if( *lpinput->token == '+' )
         return TRUE;
      else if( *lpinput->token == '-' )
      {
         *sign *= -1;
         return TRUE;
      }
   }

   return FALSE;
}

/** returns whether the current token is a value */
static
SCIP_Bool isValue(
   SCIP*                 scip,               /**< SCIP data structure */
   LPINPUT*              lpinput,            /**< LP reading data */
   SCIP_Real*            value               /**< pointer to store the value (unchanged, if token is no value) */
   )
{
   assert(lpinput != NULL);
   assert(value != NULL);

   if( strcasecmp(lpinput->token, "INFINITY") == 0 || strcasecmp(lpinput->token, "INF") == 0 )
   {
      *value = SCIPinfinity(scip);
      return TRUE;
   }
   else
   {
      double val;
      char* endptr;

      val = strtod(lpinput->token, &endptr);
      if( endptr != lpinput->token && *endptr == '\0' )
      {
         *value = val;
         return TRUE;
      }
   }

   return FALSE;
}

/** returns whether the current token is an equation sense */
static
SCIP_Bool isSense(
   LPINPUT*              lpinput,            /**< LP reading data */
   LPSENSE*              sense               /**< pointer to store the equation sense, or NULL */
   )
{
   assert(lpinput != NULL);

   if( strcmp(lpinput->token, "<") == 0 )
   {
      if( sense != NULL )
         *sense = LP_SENSE_LE;
      return TRUE;
   }
   else if( strcmp(lpinput->token, ">") == 0 )
   {
      if( sense != NULL )
         *sense = LP_SENSE_GE;
      return TRUE;
   }
   else if( strcmp(lpinput->token, "=") == 0 )
   {
      if( sense != NULL )
         *sense = LP_SENSE_EQ;
      return TRUE;
   }

   return FALSE;
}

/** returns the variable with the given name, or creates a new variable if it does not exist */
static
SCIP_RETCODE getVariable(
   SCIP*                 scip,               /**< SCIP data structure */
   char*                 name,               /**< name of the variable */
   SCIP_VAR**            var,                /**< pointer to store the variable */
   SCIP_Bool*            created             /**< pointer to store whether a new variable was created, or NULL */
   )
{
   assert(name != NULL);
   assert(var != NULL);

   *var = SCIPfindVar(scip, name);
   if( *var == NULL )
   {
      SCIP_VAR* newvar;
      SCIP_Bool dynamiccols;
      SCIP_Bool initial;
      SCIP_Bool removable;

      SCIP_CALL( SCIPgetBoolParam(scip, "reading/dynamiccols", &dynamiccols) );
      initial = !dynamiccols;
      removable = dynamiccols;

      /* create new variable of the given name */
      SCIPdebugMsg(scip, "creating new variable: <%s>\n", name);
      SCIP_CALL( SCIPcreateVar(scip, &newvar, name, 0.0, SCIPinfinity(scip), 0.0, SCIP_VARTYPE_CONTINUOUS,
            initial, removable, NULL, NULL, NULL, NULL, NULL) );
      SCIP_CALL( SCIPaddVar(scip, newvar) );
      *var = newvar;

      /* because the variable was added to the problem, it is captured by SCIP and we can safely release it right now
       * without making the returned *var invalid
       */
      SCIP_CALL( SCIPreleaseVar(scip, &newvar) );

      if( created != NULL )
         *created = TRUE;
   }
   else if( created != NULL )
      *created = FALSE;

   return SCIP_OKAY;
}

/** reads the header of the file */
static
SCIP_RETCODE readStart(
   SCIP*                 scip,               /**< SCIP data structure */
   LPINPUT*              lpinput             /**< LP reading data */
   )
{
   assert(lpinput != NULL);

   /* everything before first section is treated as comment */
   do
   {
      /* get token */
      if( !getNextToken(scip, lpinput) )
         return SCIP_OKAY;
   }
   while( !isNewSection(scip, lpinput) );

   return SCIP_OKAY;
}

/** reads an objective or constraint with name and coefficients */
static
SCIP_RETCODE readCoefficients(
   SCIP*                 scip,               /**< SCIP data structure */
   LPINPUT*              lpinput,            /**< LP reading data */
   SCIP_Bool             isobjective,        /**< indicates whether we are currently reading the coefficients of the objective */
   char*                 name,               /**< pointer to store the name of the line; must be at least of size
                                              *   LP_MAX_LINELEN */
   int*                  coefssize,          /**< size of vars and coefs arrays */
   SCIP_VAR***           vars,               /**< pointer to store the array with variables (must be freed by caller) */
   SCIP_Real**           coefs,              /**< pointer to store the array with coefficients (must be freed by caller) */
   int*                  ncoefs,             /**< pointer to store the number of coefficients */
   int*                  quadcoefssize,      /**< size of quadvars1, quadvars2, quadcoefs arrays */
   SCIP_VAR***           quadvars1,          /**< pointer to store the array with first variables in quadratic terms (must be freed by caller) */
   SCIP_VAR***           quadvars2,          /**< pointer to store the array with second variables in quadratic terms (must be freed by caller) */
   SCIP_Real**           quadcoefs,          /**< pointer to store the array with coefficients in quadratic terms (must be freed by caller) */
   int*                  nquadcoefs,         /**< pointer to store the number of quadratic coefficients */
   SCIP_Real*            objoffset,          /**< pointer to store an objective offset (or NULL if ! isobjective) */
   SCIP_Bool*            newsection          /**< pointer to store whether a new section was encountered */
   )
{
   SCIP_VAR* var = NULL;
   SCIP_Bool havesign;
   SCIP_Bool havevalue;
   SCIP_Bool haveobjoffset = FALSE;
   SCIP_Real coef;
   int coefsign;
   SCIP_Bool inquadpart;
   SCIP_VAR* firstquadvar;

   assert(lpinput != NULL);
   assert(name != NULL);
   assert(coefssize != NULL);
   assert(vars != NULL);
   assert(coefs != NULL);
   assert(ncoefs != NULL);
   assert(quadcoefssize != NULL);
   assert(quadvars1 != NULL);
   assert(quadvars2 != NULL);
   assert(quadcoefs != NULL);
   assert(nquadcoefs != NULL);
   assert(!isobjective || objoffset != NULL);
   assert(newsection != NULL);

   *coefssize = 0;
   *vars = NULL;
   *coefs = NULL;
   *quadvars1 = NULL;
   *quadvars2 = NULL;
   *quadcoefs = NULL;
   *name = '\0';
   *ncoefs = 0;
   *quadcoefssize = 0;
   *nquadcoefs = 0;
   *newsection = FALSE;
   inquadpart = FALSE;

   if( isobjective )
   {
      assert(objoffset != NULL);
      *objoffset = 0.0;
   }

   /* read the first token, which may be the name of the line */
   if( getNextToken(scip, lpinput) )
   {
      /* check if we reached a new section */
      if( isNewSection(scip, lpinput) )
      {
         *newsection = TRUE;
         return SCIP_OKAY;
      }

      /* remember the token in the token buffer */
      swapTokenBuffer(lpinput);

      /* get the next token and check, whether it is a colon */
      if( getNextToken(scip, lpinput) )
      {
         if( strcmp(lpinput->token, ":") == 0 )
         {
            /* the second token was a colon: the first token is the line name */
            (void)SCIPmemccpy(name, lpinput->tokenbuf, '\0', LP_MAX_LINELEN);

            name[LP_MAX_LINELEN - 1] = '\0';
            SCIPdebugMsg(scip, "(line %d) read constraint name: '%s'\n", lpinput->linenumber, name);
         }
         else
         {
            /* the second token was no colon: push the tokens back onto the token stack and parse them as coefficients */
            pushToken(lpinput);
            pushBufferToken(lpinput);
         }
      }
      else
      {
         /* there was only one token left: push it back onto the token stack and parse it as coefficient */
         pushBufferToken(lpinput);
      }
   }

   /* initialize buffers for storing the coefficients */
   *coefssize = LP_INIT_COEFSSIZE;
   SCIP_CALL( SCIPallocBlockMemoryArray(scip, vars, *coefssize) );
   SCIP_CALL( SCIPallocBlockMemoryArray(scip, coefs, *coefssize) );

   *quadcoefssize = LP_INIT_QUADCOEFSSIZE;
   SCIP_CALL( SCIPallocBlockMemoryArray(scip, quadvars1, *quadcoefssize) );
   SCIP_CALL( SCIPallocBlockMemoryArray(scip, quadvars2, *quadcoefssize) );
   SCIP_CALL( SCIPallocBlockMemoryArray(scip, quadcoefs, *quadcoefssize) );

   /* read the coefficients */
   coefsign = +1;
   coef = 1.0;
   havesign = FALSE;
   havevalue = FALSE;
   firstquadvar = NULL;
   *ncoefs = 0;
   *nquadcoefs = 0;
   while( getNextToken(scip, lpinput) )
   {
      /* check whether we reached a new sign token */
      if( lpinput->token[1] == '\0' && ( *lpinput->token == '+' || *lpinput->token == '-' ) )
      {
         /* check whether we found an objective offset */
         if( isobjective && havevalue && var == NULL )
         {
            assert( objoffset != NULL );
            if( haveobjoffset )
            {
               syntaxError(scip, lpinput, "two objective offsets.");
               return SCIP_OKAY;
            }
            SCIPdebugMsg(scip, "(line %d) read objective offset %g\n", lpinput->linenumber, coefsign * coef);
            haveobjoffset = TRUE;
            *objoffset = coefsign * coef;
         }
      }

      /* check if we read a sign */
      if( isSign(lpinput, &coefsign) )
      {
         if( havevalue )
         {
            syntaxError(scip, lpinput, "sign after value without variable.");
            return SCIP_OKAY;
         }

         SCIPdebugMsg(scip, "(line %d) read coefficient sign: %+d\n", lpinput->linenumber, coefsign);
         havesign = TRUE;
         continue;
      }

      /* check if we read a value */
      if( isValue(scip, lpinput, &coef) )
      {
         SCIPdebugMsg(scip, "(line %d) read coefficient value: %g with sign %+d\n", lpinput->linenumber, coef, coefsign);
         if( havevalue )
         {
            syntaxError(scip, lpinput, "two consecutive values.");
            return SCIP_OKAY;
         }
         havevalue = TRUE;
         continue;
      }

      /* check if we reached an equation sense */
      if( isSense(lpinput, NULL) )
      {
         if( isobjective )
         {
            syntaxError(scip, lpinput, "no sense allowed in objective");
            return SCIP_OKAY;
         }

         if( havevalue )
         {
            syntaxError(scip, lpinput, "no constant values allowed for constraints in lp file format");
            return SCIP_OKAY;
         }

         if( havesign )
         {
            syntaxError(scip, lpinput, "constaint has sign without a variable");
            return SCIP_OKAY;
         }

         /* put the sense back onto the token stack */
         pushToken(lpinput);
         break;
      }

      /* check if we reached a new section, that will be only allowed when having no current sign and value and if we
       * are not in the qudratic part
       */
      if( (isobjective || (!havevalue && !havesign)) && !inquadpart && isNewSection(scip, lpinput) )
      {
         if( havesign && !havevalue )
         {
            SCIPwarningMessage(scip, "skipped single sign %c without value or variable in objective\n", coefsign == 1 ? '+' : '-');
         }
         else if( isobjective && havevalue && !SCIPisZero(scip, coef) )
         {
            assert( objoffset != NULL );
            /* check whether we found an objective offset */
            if( haveobjoffset )
            {
               syntaxError(scip, lpinput, "two objective offsets.");
               return SCIP_OKAY;
            }
            SCIPdebugMsg(scip, "(line %d) read objective offset %g\n", lpinput->linenumber, coefsign * coef);
            *objoffset = coefsign * coef;
         }

         *newsection = TRUE;
         return SCIP_OKAY;
      }

      /* check if we start a quadratic part */
      if( *lpinput->token ==  '[' )
      {
         if( inquadpart )
         {
            syntaxError(scip, lpinput, "cannot start quadratic part while already in quadratic part.");
            return SCIP_OKAY;
         }
         if( havesign && coefsign != +1 )
         {
            syntaxError(scip, lpinput, "cannot have '-' in front of quadratic part.");
            return SCIP_OKAY;
         }
         if( havevalue )
         {
            syntaxError(scip, lpinput, "cannot have value in front of quadratic part.");
            return SCIP_OKAY;
         }

         SCIPdebugMsg(scip, "(line %d) start quadratic part\n", lpinput->linenumber);
         inquadpart = TRUE;
         continue;
      }

      /* check if we end a quadratic part */
      if( *lpinput->token == ']' )
      {
         if( !inquadpart )
         {
            syntaxError(scip, lpinput, "cannot end quadratic part before starting one.");
            return SCIP_OKAY;
         }
         if( havesign || havevalue || firstquadvar != NULL )
         {
            if( firstquadvar == NULL )
            {
               syntaxError(scip, lpinput, "expected value or first quadratic variable.");
            }
            else
            {
               syntaxError(scip, lpinput, "expected second quadratic variable.");
            }
            return SCIP_OKAY;
         }

         SCIPdebugMsg(scip, "(line %d) end quadratic part\n", lpinput->linenumber);
         inquadpart = FALSE;

         if( isobjective )
         {
            /* quadratic part in objective has to end with '/2' */
            if( !getNextToken(scip, lpinput) )
            {
               syntaxError(scip, lpinput, "expected '/2' or '/ 2' after end of quadratic part in objective.");
               return SCIP_OKAY;
            }
            if( strcmp(lpinput->token, "/2") == 0 )
            {
               SCIPdebugMsg(scip, "(line %d) saw '/2' or '/ 2' after quadratic part in objective\n", lpinput->linenumber);
            }
            else if( *lpinput->token == '/' )
            {
               /* maybe it says '/ 2' */
               if( !getNextToken(scip, lpinput) || *lpinput->token != '2' )
               {
                  syntaxError(scip, lpinput, "expected '/2' or '/ 2' after end of quadratic part in objective.");
                  return SCIP_OKAY;
               }
               SCIPdebugMsg(scip, "(line %d) saw '/ 2' after quadratic part in objective\n", lpinput->linenumber);
            }
            else
            {
               syntaxError(scip, lpinput, "expected '/2' or '/ 2' after end of quadratic part in objective.");
               return SCIP_OKAY;
            }
         }

         continue;
      }

      /* check if we are in between two quadratic variables */
      if( *lpinput->token == '*' )
      {
         if( !inquadpart )
         {
            syntaxError(scip, lpinput, "cannot have '*' outside of quadratic part.");
            return SCIP_OKAY;
         }
         if( firstquadvar == NULL )
         {
            syntaxError(scip, lpinput, "cannot have '*' before first variable in quadratic term.");
            return SCIP_OKAY;
         }

         continue;
      }

      /* all but the first coefficient need a sign */
      if( !inquadpart && *ncoefs > 0 && !havesign )
      {
         syntaxError(scip, lpinput, "expected sign ('+' or '-') or sense ('<' or '>').");
         return SCIP_OKAY;
      }
      if( inquadpart && *nquadcoefs > 0 && !havesign )
      {
         syntaxError(scip, lpinput, "expected sign ('+' or '-').");
         return SCIP_OKAY;
      }

      /* check if the last variable should be squared */
      var = NULL;
      if( *lpinput->token == '^' )
      {
         if( !inquadpart )
         {
            syntaxError(scip, lpinput, "cannot have squares ('^2') outside of quadratic part.");
            return SCIP_OKAY;
         }
         if( firstquadvar == NULL )
         {
            syntaxError(scip, lpinput, "cannot have square '^2' before variable.");
            return SCIP_OKAY;
         }

         var = firstquadvar;
      }
      else
      {
         /* the token is a variable name: get the corresponding variable (or create a new one) */
         SCIP_CALL( getVariable(scip, lpinput->token, &var, NULL) );
      }

      if( !inquadpart )
      {
         /* insert the linear coefficient */
         SCIPdebugMsg(scip, "(line %d) read linear coefficient: %+g<%s>\n", lpinput->linenumber, coefsign * coef, SCIPvarGetName(var));
         if( !SCIPisZero(scip, coef) )
         {
            /* resize the vars and coefs array if needed */
            if( *ncoefs >= *coefssize )
            {
               int oldcoefssize;
               oldcoefssize = *coefssize;
               *coefssize *= 2;
               *coefssize = MAX(*coefssize, (*ncoefs)+1);
               SCIP_CALL( SCIPreallocBlockMemoryArray(scip, vars, oldcoefssize, *coefssize) );
               SCIP_CALL( SCIPreallocBlockMemoryArray(scip, coefs, oldcoefssize, *coefssize) );
            }
            assert(*ncoefs < *coefssize);

            /* add coefficient */
            (*vars)[*ncoefs] = var;
            (*coefs)[*ncoefs] = coefsign * coef;
            (*ncoefs)++;
         }
      }
      else
      {
         if( firstquadvar == NULL )
         {
            /* if first quadratic variable read, store it and continue; expect second one in next round */
            firstquadvar = var;
            continue;
         }

         /* insert the quadratic coefficient */
         SCIPdebugMsg(scip, "(line %d) read quadratic coefficient: %+g<%s><%s>\n", lpinput->linenumber, (isobjective ? 0.5 : 1) * coefsign * coef, SCIPvarGetName(firstquadvar), SCIPvarGetName(var));
         if( !SCIPisZero(scip, coef) )
         {
            /* resize the vars and coefs array if needed */
            if( *nquadcoefs >= *quadcoefssize )
            {
               int oldquadcoefssize;
               oldquadcoefssize = *quadcoefssize;
               *quadcoefssize *= 2;
               *quadcoefssize = MAX(*quadcoefssize, (*nquadcoefs)+1);
               SCIP_CALL( SCIPreallocBlockMemoryArray(scip, quadcoefs, oldquadcoefssize, *quadcoefssize) );
               SCIP_CALL( SCIPreallocBlockMemoryArray(scip, quadvars2, oldquadcoefssize, *quadcoefssize) );
               SCIP_CALL( SCIPreallocBlockMemoryArray(scip, quadvars1, oldquadcoefssize, *quadcoefssize) );
            }
            assert(*nquadcoefs < *quadcoefssize);

            /* add coefficient */
            (*quadvars1)[*nquadcoefs] = firstquadvar;
            (*quadvars2)[*nquadcoefs] = var;
            (*quadcoefs)[*nquadcoefs] = coefsign * coef;
            if( isobjective )
               (*quadcoefs)[*nquadcoefs] /= 2.0;
            (*nquadcoefs)++;
         }
      }

      /* reset the flags and coefficient value for the next coefficient */
      coefsign = +1;
      coef = 1.0;
      havesign = FALSE;
      havevalue = FALSE;
      firstquadvar = NULL;
   }

   return SCIP_OKAY;
}

/** reads the objective section */
static
SCIP_RETCODE readObjective(
   SCIP*                 scip,               /**< SCIP data structure */
   LPINPUT*              lpinput             /**< LP reading data */
   )
{
   char name[LP_MAX_LINELEN];
   SCIP_VAR** vars;
   SCIP_Real* coefs;
   SCIP_VAR** quadvars1;
   SCIP_VAR** quadvars2;
   SCIP_Real* quadcoefs;
   SCIP_Bool newsection;
   SCIP_Real objoffset;
   int ncoefs;
   int coefssize;
   int quadcoefssize;
   int nquadcoefs;

   assert(lpinput != NULL);

   /* read the objective coefficients */
   SCIP_CALL( readCoefficients(scip, lpinput, TRUE, name, &coefssize, &vars, &coefs, &ncoefs,
         &quadcoefssize, &quadvars1, &quadvars2, &quadcoefs, &nquadcoefs, &objoffset, &newsection) );

   if( ! SCIPisZero(scip, objoffset) )
   {
      SCIP_CALL( SCIPaddOrigObjoffset(scip, objoffset) );
   }

   if( !hasError(lpinput) )
   {
      int i;

      /* set the linear objective values */
      for( i = 0; i < ncoefs; ++i )
      {
         assert(vars != NULL);  /* for lint */
         assert(coefs != NULL);
         SCIP_CALL( SCIPchgVarObj(scip, vars[i], SCIPvarGetObj(vars[i]) + coefs[i]) );
      }

      /* insert dummy variable and constraint to represent quadratic part of objective; note that
       * reading/{initialconss,dynamicconss,dynamicrows,dynamiccols} apply only to model constraints and variables, not
       * to an auxiliary objective constraint (otherwise it can happen that an auxiliary objective variable is loose
       * with infinite best bound, triggering the problem that an LP that is unbounded because of loose variables with
       * infinite best bound cannot be solved)
       */
      if( nquadcoefs > 0 )
      {
         SCIP_VAR*  quadobjvar;
         SCIP_CONS* quadobjcons;
         SCIP_Real  lhs;
         SCIP_Real  rhs;
         SCIP_Real  minusone;

         SCIP_CALL( SCIPcreateVar(scip, &quadobjvar, "quadobjvar", -SCIPinfinity(scip), SCIPinfinity(scip), 1.0,
               SCIP_VARTYPE_CONTINUOUS, TRUE, FALSE, NULL, NULL, NULL, NULL, NULL) );
         SCIP_CALL( SCIPaddVar(scip, quadobjvar) );

         if( lpinput->objsense == SCIP_OBJSENSE_MINIMIZE )
         {
            lhs = -SCIPinfinity(scip);
            rhs = 0.0;
         }
         else
         {
            lhs = 0.0;
            rhs = SCIPinfinity(scip);
         }

         minusone = -1.0;
         SCIP_CALL( SCIPcreateConsQuadraticNonlinear(scip, &quadobjcons, "quadobj", 1, &quadobjvar, &minusone, nquadcoefs, quadvars1, quadvars2, quadcoefs, lhs, rhs,
               TRUE, TRUE, TRUE, TRUE, TRUE, FALSE, FALSE, FALSE, FALSE) );

         SCIP_CALL( SCIPaddCons(scip, quadobjcons) );
         SCIPdebugMsg(scip, "(line %d) added constraint <%s> to represent quadratic objective: ", lpinput->linenumber, SCIPconsGetName(quadobjcons));
         SCIPdebugPrintCons(scip, quadobjcons, NULL);

         SCIP_CALL( SCIPreleaseCons(scip, &quadobjcons) );
         SCIP_CALL( SCIPreleaseVar(scip, &quadobjvar) );
      }
   }

   /* free memory */
   SCIPfreeBlockMemoryArrayNull(scip, &quadcoefs, quadcoefssize);
   SCIPfreeBlockMemoryArrayNull(scip, &quadvars2, quadcoefssize);
   SCIPfreeBlockMemoryArrayNull(scip, &quadvars1, quadcoefssize);
   SCIPfreeBlockMemoryArrayNull(scip, &vars, coefssize);
   SCIPfreeBlockMemoryArrayNull(scip, &coefs, coefssize);

   return SCIP_OKAY; /*lint !e438*/
}

/** create indicator constraint */
static
SCIP_RETCODE createIndicatorConstraint(
   SCIP*                 scip,               /**< SCIP data structure */
   LPINPUT*              lpinput,            /**< LP reading data */
   const char*           name,               /**< name of indicator constraint */
   SCIP_VAR*             binvar,             /**< binary indicator variable */
   SCIP_Real             binvalue            /**< value of indicator part (0/1) */
   )
{
   char name2[LP_MAX_LINELEN];
   SCIP_VAR** linvars;
   SCIP_Real* lincoefs;
   SCIP_VAR** quadvars1;
   SCIP_VAR** quadvars2;
   SCIP_Real* quadcoefs;
   SCIP_CONS* cons;
   SCIP_RETCODE retcode;
   LPSENSE linsense;
   SCIP_Real linsidevalue;
   SCIP_Real linrhs;
   SCIP_Bool newsection;
   SCIP_Bool linConsEQ;
   SCIP_Bool initial;
   SCIP_Bool separate;
   SCIP_Bool enforce;
   SCIP_Bool check;
   SCIP_Bool propagate;
   SCIP_Bool local;
   SCIP_Bool dynamic;
   SCIP_Bool removable;
   int lincoefssize;
   int quadcoefssize;
   int nlincoefs;
   int nquadcoefs;
   int linsidesign;
   int j;

   assert( lpinput != NULL );
   assert( binvar != NULL );

   retcode = SCIP_OKAY;

   /* check that binvalue is 0 or 1 */
   if( !SCIPisFeasEQ(scip, binvalue, 0.0) && !SCIPisFeasEQ(scip, binvalue, 1.0) )
   {
      syntaxError(scip, lpinput, "value for binary variable must be '0' or '1'.");
      return SCIP_OKAY;
   }

   if( SCIPisFeasEQ(scip, binvalue, 0.0) )
   {
      SCIP_VAR* negbinvar;
      SCIP_Bool infeasible;

      /* At this point we force the variable binvar to be binary, since we need the negated variable. We have to check
       * later whether the type of the variable specified in the file agrees with this specification. 
       */
      /* check whether bounds are correct - might already been set if variable is used in another indicator constraint */
      if( SCIPvarGetLbGlobal(binvar) < 0.0 )
         SCIP_CALL( SCIPchgVarLb(scip, binvar, 0.0) );
      if( SCIPvarGetUbGlobal(binvar) > 1.0 )
         SCIP_CALL( SCIPchgVarUb(scip, binvar, 1.0) );
      SCIP_CALL( SCIPchgVarType(scip, binvar, SCIP_VARTYPE_BINARY, &infeasible) );
      /* don't assert feasibility here because the presolver will and should detect a infeasibility */

      SCIP_CALL( SCIPgetNegatedVar(scip, binvar, &negbinvar) );
      binvar = negbinvar;
      assert( binvar != NULL );
   }

   /* read linear constraint */
   SCIP_CALL( readCoefficients(scip, lpinput, FALSE, name2, &lincoefssize, &linvars, &lincoefs, &nlincoefs,
         &quadcoefssize, &quadvars1, &quadvars2, &quadcoefs, &nquadcoefs, NULL, &newsection) );

   if( hasError(lpinput) )
      goto TERMINATE;
   if( newsection )
   {
      syntaxError(scip, lpinput, "expected constraint.");
      goto TERMINATE;
   }
   if( nquadcoefs > 0 )
   {
      /* @todo could introduce auxiliary variable and move quadratic part into quadratic constraint? */
      syntaxError(scip, lpinput, "quadratic indicator constraints not supported.");
      goto TERMINATE;
   }
   if( name2[0] != '\0' )
   {
      syntaxError(scip, lpinput, "did not expect name for linear constraint.");
      goto TERMINATE;
   }

   /* read the constraint sense */
   if( !getNextToken(scip, lpinput) )
   {
      syntaxError(scip, lpinput, "missing constraint sense.");
      goto TERMINATE;
   }
   if( !isSense(lpinput, &linsense) )
   {
      syntaxError(scip, lpinput, "expected constraint sense '<=', '=', or '>='.");
      goto TERMINATE;
   }
   assert(linsense == LP_SENSE_GE || linsense == LP_SENSE_LE || linsense == LP_SENSE_EQ); /*lint !e530*/

   /* read the right hand side */
   linsidesign = +1;
   if( !getNextToken(scip, lpinput) )
   {
      syntaxError(scip, lpinput, "missing right hand side.");
      goto TERMINATE;
   }
   if( isSign(lpinput, &linsidesign) )
   {
      if( !getNextToken(scip, lpinput) )
      {
         syntaxError(scip, lpinput, "missing value of right hand side.");
         goto TERMINATE;
      }
   }
   if( !isValue(scip, lpinput, &linsidevalue) )
   {
      syntaxError(scip, lpinput, "expected value for right hand side.");
      goto TERMINATE;
   }
   linsidevalue *= linsidesign;

   /* assign the left and right hand side, depending on the constraint sense */
   linConsEQ = FALSE;
   switch( linsense ) /*lint !e530*/
   {
   case LP_SENSE_GE:
      linrhs = -linsidevalue;
      for( j = 0; j < nlincoefs; ++j )
         lincoefs[j] *= -1;
      break;
   case LP_SENSE_LE:
      linrhs = linsidevalue;
      break;
   case LP_SENSE_EQ:
      linConsEQ = TRUE;
      linrhs = linsidevalue;
      break;
   case LP_SENSE_NOTHING:
   default:
      /* this case cannot occur because it is caught by the syntax check method isSense() above */
      SCIPerrorMessage("invalid constraint sense <%d>\n", linsense);
      return SCIP_INVALIDDATA;
   }
   assert(lincoefs != NULL);

   /* create and add the indicator constraint */
   initial = lpinput->initialconss && !lpinput->inlazyconstraints && !lpinput->inusercuts;
   separate = TRUE;
   enforce = !lpinput->inusercuts;
   check = !lpinput->inusercuts;
   propagate = TRUE;
   local = FALSE;
   dynamic = lpinput->dynamicconss;
   removable = lpinput->dynamicrows || lpinput->inusercuts;

   retcode = SCIPcreateConsIndicator(scip, &cons, name, binvar, nlincoefs, linvars, lincoefs, linrhs,
      initial, separate, enforce, check, propagate, local, dynamic, removable, FALSE);

   if( retcode != SCIP_OKAY )
      goto TERMINATE;

   SCIP_CALL( SCIPaddCons(scip, cons) );
   SCIPdebugMsg(scip, "(line %d) created constraint%s: ", lpinput->linenumber,
      lpinput->inlazyconstraints ? " (lazy)" : (lpinput->inusercuts ? " (user cut)" : ""));
   SCIPdebugPrintCons(scip, cons, NULL);
   SCIP_CALL( SCIPreleaseCons(scip, &cons) );

   /* create second constraint if it was an equation */
   if( linConsEQ )
   {
      char newname[SCIP_MAXSTRLEN];

      (void) SCIPsnprintf(newname, SCIP_MAXSTRLEN, "%s_eqneg", name);

      for( j = 0; j < nlincoefs; ++j )
         lincoefs[j] *= -1;
      linrhs *= -1;
      retcode = SCIPcreateConsIndicator(scip, &cons, newname, binvar, nlincoefs, linvars, lincoefs, linrhs,
         initial, separate, enforce, check, propagate, local, dynamic, removable, FALSE);

      if( retcode != SCIP_OKAY )
         goto TERMINATE;

      SCIP_CALL( SCIPaddCons(scip, cons) );
      SCIPdebugMsg(scip, "(line %d) created constraint%s: ", lpinput->linenumber,
         lpinput->inlazyconstraints ? " (lazy)" : (lpinput->inusercuts ? " (user cut)" : ""));
      SCIPdebugPrintCons(scip, cons, NULL);
      SCIP_CALL( SCIPreleaseCons(scip, &cons) );
   }

 TERMINATE:
   /* free memory */
   SCIPfreeBlockMemoryArrayNull(scip, &quadvars1, quadcoefssize);
   SCIPfreeBlockMemoryArrayNull(scip, &quadvars2, quadcoefssize);
   SCIPfreeBlockMemoryArrayNull(scip, &quadcoefs, quadcoefssize);
   SCIPfreeBlockMemoryArrayNull(scip, &lincoefs, lincoefssize);
   SCIPfreeBlockMemoryArrayNull(scip, &linvars, lincoefssize);

   SCIP_CALL( retcode );

   return SCIP_OKAY;
}

/** reads the constraints section 
 *
 *  Read linear and indicator constraints.
 *
 *  The CPLEX manual says that indicator constraints are of the following form:
 *
 *  [constraintname:]  binaryvariable = value  ->  linear constraint
 *
 *  We also accept "<->".
 */
static
SCIP_RETCODE readConstraints(
   SCIP*                 scip,               /**< SCIP data structure */
   LPINPUT*              lpinput             /**< LP reading data */
   )
{
   char name[LP_MAX_LINELEN];
   SCIP_CONS* cons;
   SCIP_VAR** vars;
   SCIP_Real* coefs;
   SCIP_VAR** quadvars1;
   SCIP_VAR** quadvars2;
   SCIP_Real* quadcoefs;
   LPSENSE sense;
   SCIP_RETCODE retcode;
   SCIP_Real sidevalue;
   SCIP_Real lhs;
   SCIP_Real rhs;
   SCIP_Bool newsection;
   SCIP_Bool initial;
   SCIP_Bool separate;
   SCIP_Bool enforce;
   SCIP_Bool check;
   SCIP_Bool propagate;
   SCIP_Bool local;
   SCIP_Bool modifiable;
   SCIP_Bool dynamic;
   SCIP_Bool removable;
   SCIP_Bool isIndicatorCons;
   int ncoefs;
   int nquadcoefs;
   int sidesign;
   int quadcoefssize;
   int coefssize;

   assert(lpinput != NULL);

   retcode = SCIP_OKAY;

   /* read coefficients */
   SCIP_CALL( readCoefficients(scip, lpinput, FALSE, name, &coefssize, &vars, &coefs, &ncoefs,
         &quadcoefssize, &quadvars1, &quadvars2, &quadcoefs, &nquadcoefs, NULL, &newsection) );

   if( hasError(lpinput) )
      goto TERMINATE;
   if( newsection )
   {
      if( ncoefs > 0 || nquadcoefs > 0 )
         syntaxError(scip, lpinput, "expected constraint sense '<=', '=', or '>='.");
      goto TERMINATE;
   }

   /* read the constraint sense */
   if( !getNextToken(scip, lpinput) )
   {
      syntaxError(scip, lpinput, "missing constraint sense.");
      goto TERMINATE;
   }
   if( !isSense(lpinput, &sense) )
   {
      syntaxError(scip, lpinput, "expected constraint sense '<=', '=', or '>='.");
      goto TERMINATE;
   }
   assert(sense == LP_SENSE_GE || sense == LP_SENSE_LE || sense == LP_SENSE_EQ); /*lint !e530*/

   /* read the right hand side */
   sidesign = +1;
   if( !getNextToken(scip, lpinput) )
   {
      syntaxError(scip, lpinput, "missing right hand side.");
      goto TERMINATE;
   }
   if( isSign(lpinput, &sidesign) )
   {
      if( !getNextToken(scip, lpinput) )
      {
         syntaxError(scip, lpinput, "missing value of right hand side.");
         goto TERMINATE;
      }
   }
   if( !isValue(scip, lpinput, &sidevalue) )
   {
      syntaxError(scip, lpinput, "expected value as right hand side.");
      goto TERMINATE;
   }
   sidevalue *= sidesign;

   /* assign the left and right hand side, depending on the constraint sense */
   switch( sense ) /*lint !e530*/
   {
   case LP_SENSE_GE:
      lhs = sidevalue;
      rhs = SCIPinfinity(scip);
      break;
   case LP_SENSE_LE:
      lhs = -SCIPinfinity(scip);
      rhs = sidevalue;
      break;
   case LP_SENSE_EQ:
      lhs = sidevalue;
      rhs = sidevalue;
      break;
   case LP_SENSE_NOTHING:
   default:
      /* this case cannot occur because it is caught by the syntax check method isSense() above */
      SCIPerrorMessage("invalid constraint sense <%d>.\n", sense);
      return SCIP_INVALIDDATA;
   }

   /* check whether we read the first part of an indicator constraint */
   isIndicatorCons = FALSE;
   if ( getNextToken(scip, lpinput) && !isNewSection(scip, lpinput) )
   {
      /* check whether we have '<' from a "<->" string */
      if ( *lpinput->token == '<' )
      {
         int linepos = lpinput->linepos-1;

         /* check next token - cannot be a new section */
         if ( getNextToken(scip, lpinput) )
         {
            /* check for "<-" */
            if ( *lpinput->token == '-' )
            {
               /* check next token - cannot be a new section */
               if ( getNextToken(scip, lpinput) )
               {
                  /* check for "<->" */
                  if ( *lpinput->token == '>' )
                  {
                     lpinput->linepos = linepos;
                     (void) SCIPsnprintf(lpinput->token, 2, "<");
                     syntaxError(scip, lpinput,
                        "SCIP does not support equivalence (<->) indicator constraints; consider using the \"->\" form.");
                     goto TERMINATE;
                  }
               }
            }
         }
         /* reset the lpinput for further usage as we have no indicator constraint */
         lpinput->linepos = linepos;
         (void) SCIPsnprintf(lpinput->token, 2, "<");
      }

      /* check for "->" */
      if ( *lpinput->token == '-' )
      {
         /* remember '-' in token buffer */
         swapTokenBuffer(lpinput);

         /* check next token - cannot be a new section */
         if( getNextToken(scip, lpinput) )
         {
            /* check for "->" */
            if ( *lpinput->token == '>' )
               isIndicatorCons = TRUE;
            else
            {
               /* push back last token and '-' */
               pushToken(lpinput);
               pushBufferToken(lpinput);
            }
         }
         else
            pushBufferToken(lpinput);
      }
      else
         pushToken(lpinput);
   }

   if( !isIndicatorCons )
   {
      /* create and add the linear constraint */
      initial = lpinput->initialconss && !lpinput->inlazyconstraints && !lpinput->inusercuts;
      separate = TRUE;
      enforce = !lpinput->inusercuts;
      check = !lpinput->inusercuts;
      propagate = TRUE;
      local = FALSE;
      modifiable = FALSE;
      dynamic = lpinput->dynamicconss;
      removable = lpinput->dynamicrows || lpinput->inusercuts;
      if( nquadcoefs == 0 )
      {
         retcode = SCIPcreateConsLinear(scip, &cons, name, ncoefs, vars, coefs, lhs, rhs,
            initial, separate, enforce, check, propagate, local, modifiable, dynamic, removable, FALSE);
      }
      else
      {
         retcode = SCIPcreateConsQuadraticNonlinear(scip, &cons, name, ncoefs, vars, coefs,
            nquadcoefs, quadvars1, quadvars2, quadcoefs, lhs, rhs,
            initial, separate, enforce, check, propagate, local, modifiable, dynamic, removable);
      }

      if( retcode != SCIP_OKAY )
         goto TERMINATE;

      SCIP_CALL( SCIPaddCons(scip, cons) );
      SCIPdebugMsg(scip, "(line %d) created constraint%s: ", lpinput->linenumber,
         lpinput->inlazyconstraints ? " (lazy)" : (lpinput->inusercuts ? " (user cut)" : ""));
      SCIPdebugPrintCons(scip, cons, NULL);
      SCIP_CALL( SCIPreleaseCons(scip, &cons) );
   }
   else
   {
      /* now we should have an indicator constraint */
      if( ncoefs != 1 || nquadcoefs > 0 )
      {
         syntaxError(scip, lpinput, "Indicator part can only consist of one binary variable.");
         goto TERMINATE;
      }
      assert(coefs != NULL);
      if( !SCIPisEQ(scip, coefs[0], 1.0) )
      {
         syntaxError(scip, lpinput, "There cannot be a coefficient before the binary indicator variable.");
         goto TERMINATE;
      }
      if( sense != LP_SENSE_EQ )
      {
         syntaxError(scip, lpinput, "Indicator part cannot handle equations.");
         goto TERMINATE;
      }
      assert(vars != NULL);
      retcode = createIndicatorConstraint(scip, lpinput, name, vars[0], lhs);
   }

 TERMINATE:
   /* free memory */
   SCIPfreeBlockMemoryArrayNull(scip, &quadcoefs, quadcoefssize);
   SCIPfreeBlockMemoryArrayNull(scip, &quadvars2, quadcoefssize);
   SCIPfreeBlockMemoryArrayNull(scip, &quadvars1, quadcoefssize);
   SCIPfreeBlockMemoryArrayNull(scip, &coefs, coefssize);
   SCIPfreeBlockMemoryArrayNull(scip, &vars, coefssize);

   SCIP_CALL( retcode );

   return SCIP_OKAY;
}

/** reads the bounds section */
static
SCIP_RETCODE readBounds(
   SCIP*                 scip,               /**< SCIP data structure */
   LPINPUT*              lpinput             /**< LP reading data */
   )
{
   assert(lpinput != NULL);

   while( getNextToken(scip, lpinput) )
   {
      SCIP_VAR* var;
      SCIP_Real value;
      SCIP_Real lb;
      SCIP_Real ub;
      int sign;
      SCIP_Bool hassign;
      LPSENSE leftsense;

      /* check if we reached a new section */
      if( isNewSection(scip, lpinput) )
         return SCIP_OKAY;

      /* default bounds are [0,+inf] */
      lb = 0.0;
      ub = SCIPinfinity(scip);
      leftsense = LP_SENSE_NOTHING;

      /* check if the first token is a sign */
      sign = +1;
      hassign = isSign(lpinput, &sign);
      if( hassign && !getNextToken(scip, lpinput) )
      {
         syntaxError(scip, lpinput, "expected value.");
         return SCIP_OKAY;
      }

      /* the first token must be either a value or a variable name */
      if( isValue(scip, lpinput, &value) )
      {
         /* first token is a value: the second token must be a sense */
         if( !getNextToken(scip, lpinput) || !isSense(lpinput, &leftsense) )
         {
            syntaxError(scip, lpinput, "expected bound sense '<=', '=', or '>='.");
            return SCIP_OKAY;
         }

         /* update the bound corresponding to the sense */
         switch( leftsense )
         {
         case LP_SENSE_GE:
            ub = sign * value;
            break;
         case LP_SENSE_LE:
            lb = sign * value;
            break;
         case LP_SENSE_EQ:
            lb = sign * value;
            ub = sign * value;
            break;
         case LP_SENSE_NOTHING:
         default:
            SCIPerrorMessage("invalid bound sense <%d>\n", leftsense);
            return SCIP_INVALIDDATA;
         }
      }
      else if( hassign )
      {
         syntaxError(scip, lpinput, "expected value.");
         return SCIP_OKAY;
      }
      else
         pushToken(lpinput);

      /* the next token must be a variable name */
      if( !getNextToken(scip, lpinput) )
      {
         syntaxError(scip, lpinput, "expected variable name.");
         return SCIP_OKAY;
      }
      SCIP_CALL( getVariable(scip, lpinput->token, &var, NULL) );

      /* the next token might be another sense, or the word "free" */
      if( getNextToken(scip, lpinput) )
      {
         LPSENSE rightsense;

         if( isSense(lpinput, &rightsense) )
         {
            /* check, if the senses fit */
            if( leftsense == LP_SENSE_NOTHING
               || (leftsense == LP_SENSE_LE && rightsense == LP_SENSE_LE)
               || (leftsense == LP_SENSE_GE && rightsense == LP_SENSE_GE) )
            {
               if( !getNextToken(scip, lpinput) )
               {
                  syntaxError(scip, lpinput, "expected value or sign.");
                  return SCIP_OKAY;
               }

               /* check if the next token is a sign */
               sign = +1;
               hassign = isSign(lpinput, &sign);
               if( hassign && !getNextToken(scip, lpinput) )
               {
                  syntaxError(scip, lpinput, "expected value.");
                  return SCIP_OKAY;
               }

               /* the next token must be a value */
               if( !isValue(scip, lpinput, &value) )
               {
                  syntaxError(scip, lpinput, "expected value.");
                  return SCIP_OKAY;
               }

               /* update the bound corresponding to the sense */
               switch( rightsense )
               {
               case LP_SENSE_GE:
                  lb = sign * value;
                  break;
               case LP_SENSE_LE:
                  ub = sign * value;
                  break;
               case LP_SENSE_EQ:
                  lb = sign * value;
                  ub = sign * value;
                  break;
               case LP_SENSE_NOTHING:
               default:
                  SCIPerrorMessage("invalid bound sense <%d>\n", leftsense);
                  return SCIP_INVALIDDATA;
               }
            }
            else
            {
               syntaxError(scip, lpinput, "the two bound senses do not fit.");
               return SCIP_OKAY;
            }
         }
         else if( strcasecmp(lpinput->token, "FREE") == 0 )
         {
            if( leftsense != LP_SENSE_NOTHING )
            {
               syntaxError(scip, lpinput, "variable with bound is marked as 'free'.");
               return SCIP_OKAY;
            }
            lb = -SCIPinfinity(scip);
            ub = SCIPinfinity(scip);
         }
         else
         {
            /* the token was no sense: push it back to the token stack */
            pushToken(lpinput);
         }
      }

      /* change the bounds of the variable if bounds have been given (do not destroy earlier specification of bounds) */
      if( lb != 0.0 )
         SCIP_CALL( SCIPchgVarLb(scip, var, lb) );
      /*lint --e{777}*/
      if( ub != SCIPinfinity(scip) )
         SCIP_CALL( SCIPchgVarUb(scip, var, ub) );
      SCIPdebugMsg(scip, "(line %d) new bounds: <%s>[%g,%g]\n", lpinput->linenumber, SCIPvarGetName(var),
         SCIPvarGetLbGlobal(var), SCIPvarGetUbGlobal(var));
   }

   return SCIP_OKAY;
}

/** reads the generals section */
static
SCIP_RETCODE readGenerals(
   SCIP*                 scip,               /**< SCIP data structure */
   LPINPUT*              lpinput             /**< LP reading data */
   )
{
   assert(lpinput != NULL);

   while( getNextToken(scip, lpinput) )
   {
      SCIP_VAR* var;
      SCIP_Real lb;
      SCIP_Real ub;
      SCIP_Bool created;
      SCIP_Bool infeasible;

      /* check if we reached a new section */
      if( isNewSection(scip, lpinput) )
         return SCIP_OKAY;

      /* the token must be the name of an existing variable */
      SCIP_CALL( getVariable(scip, lpinput->token, &var, &created) );
      if( created )
      {
         syntaxError(scip, lpinput, "unknown variable in generals section.");
         return SCIP_OKAY;
      }

      lb = SCIPvarGetLbGlobal(var);
      ub = SCIPvarGetUbGlobal(var);

      if( !SCIPisFeasIntegral(scip, lb) || !SCIPisFeasIntegral(scip, ub) )
      {
         SCIPwarningMessage(scip, "variable <%s> declared as integer has non-integral bounds[%.14g, %.14g] -> if feasible, bounds will be adjusted\n", SCIPvarGetName(var), lb, ub);
      }

      /* mark the variable to be integral */
      SCIP_CALL( SCIPchgVarType(scip, var, SCIP_VARTYPE_INTEGER, &infeasible) );
      /* don't assert feasibility here because the presolver will and should detect a infeasibility */
   }

   return SCIP_OKAY;
}

/** reads the binaries section */
static
SCIP_RETCODE readBinaries(
   SCIP*                 scip,               /**< SCIP data structure */
   LPINPUT*              lpinput             /**< LP reading data */
   )
{
   assert(lpinput != NULL);

   while( getNextToken(scip, lpinput) )
   {
      SCIP_VAR* var;
      SCIP_Real lb;
      SCIP_Real ub;
      SCIP_Bool created;
      SCIP_Bool infeasible;

      /* check if we reached a new section */
      if( isNewSection(scip, lpinput) )
         return SCIP_OKAY;

      /* the token must be the name of an existing variable */
      SCIP_CALL( getVariable(scip, lpinput->token, &var, &created) );
      if( created )
      {
         syntaxError(scip, lpinput, "unknown variable in binaries section.");
         return SCIP_OKAY;
      }

      lb = SCIPvarGetLbGlobal(var);
      ub = SCIPvarGetUbGlobal(var);

      if( (!SCIPisFeasZero(scip, lb) && !SCIPisFeasEQ(scip, lb, 1.0)) ||
          (!SCIPisFeasZero(scip, ub) && !SCIPisFeasEQ(scip, ub, 1.0) && !SCIPisInfinity(scip, ub)) )
      {
         SCIPwarningMessage(scip, "variable <%s> declared as binary has non-binary bounds[%.14g, %.14g] -> if feasible, bounds will be adjusted\n", SCIPvarGetName(var), lb, ub);
      }

      /* mark the variable to be binary and change its bounds appropriately */
      if( SCIPvarGetLbGlobal(var) < 0.0 )
      {
         SCIP_CALL( SCIPchgVarLb(scip, var, 0.0) );
      }
      if( SCIPvarGetUbGlobal(var) > 1.0 )
      {
         SCIP_CALL( SCIPchgVarUb(scip, var, 1.0) );
      }
      SCIP_CALL( SCIPchgVarType(scip, var, SCIP_VARTYPE_BINARY, &infeasible) );
      /* don't assert feasibility here because the presolver will and should detect a infeasibility */
   }

   return SCIP_OKAY;
}

/** reads the semi-continuous section */
static
SCIP_RETCODE readSemicontinuous(
   SCIP*                 scip,               /**< SCIP data structure */
   LPINPUT*              lpinput             /**< LP reading data */
   )
{
   SCIP_Real oldlb;
   char name[SCIP_MAXSTRLEN];
   SCIP_CONS* cons;
   SCIP_VAR* var;
   SCIP_Bool created;

   SCIP_VAR* vars[2];
   SCIP_BOUNDTYPE boundtypes[2];
   SCIP_Real bounds[2];

   assert(lpinput != NULL);

   /* if section is titles "semi-continuous", then the parser breaks this into parts */
   if( strcasecmp(lpinput->token, "SEMI") == 0 )
   {
      if( !getNextToken(scip, lpinput) )
      {
         syntaxError(scip, lpinput, "unexpected end.");
         return SCIP_OKAY;
      }

      if( strcasecmp(lpinput->token, "-") == 0 )
      {
         if( !getNextToken(scip, lpinput) || strcasecmp(lpinput->token, "CONTINUOUS") != 0 )
         {
            syntaxError(scip, lpinput, "expected 'CONTINUOUS' after 'SEMI-'.");
            return SCIP_OKAY;
         }
      }
      else
      {
         pushToken(lpinput);
      }
   }

   while( getNextToken(scip, lpinput) )
   {
      /* check if we reached a new section */
      if( isNewSection(scip, lpinput) )
         return SCIP_OKAY;

      /* the token must be the name of an existing variable */
      SCIP_CALL( getVariable(scip, lpinput->token, &var, &created) );
      if( created )
      {
         syntaxError(scip, lpinput, "unknown variable in semi-continuous section.");
         return SCIP_OKAY;
      }

      if( SCIPvarGetLbGlobal(var) <= 0.0 )
      {
         SCIPdebugMsg(scip, "ignore semi-continuity of variable <%s> with negative lower bound %g\n", SCIPvarGetName(var), SCIPvarGetLbGlobal(var));
         continue;
      }

      oldlb = SCIPvarGetLbGlobal(var);

      /* change the lower bound to 0.0 */
      SCIP_CALL( SCIPchgVarLb(scip, var, 0.0) );

      /* add a bound disjunction constraint to say var <= 0.0 or var >= oldlb */
      (void) SCIPsnprintf(name, SCIP_MAXSTRLEN, "semicont_%s", SCIPvarGetName(var));

      vars[0] = var;
      vars[1] = var;
      boundtypes[0] = SCIP_BOUNDTYPE_UPPER;
      boundtypes[1] = SCIP_BOUNDTYPE_LOWER;
      bounds[0] = 0.0;
      bounds[1] = oldlb;

      SCIP_CALL( SCIPcreateConsBounddisjunction(scip, &cons, name, 2, vars, boundtypes, bounds,
            !(lpinput->dynamiccols), TRUE, TRUE, TRUE, TRUE, FALSE, FALSE, lpinput->dynamicconss, lpinput->dynamiccols, FALSE) );
      SCIP_CALL( SCIPaddCons(scip, cons) );

      SCIPdebugMsg(scip, "add bound disjunction constraint for semi-continuity of <%s>:\n\t", SCIPvarGetName(var));
      SCIPdebugPrintCons(scip, cons, NULL);

      SCIP_CALL( SCIPreleaseCons(scip, &cons) );
   }

   return SCIP_OKAY;
}

/** reads the sos section
 *
 *  The format is as follows:
 *
 *  SOS
 *  <constraint name>: [S1|S2]:: {<variable name>:<weight>}
 *  ...
 *  <constraint name>: [S1|S2]:: {<variable name>:<weight>}
 * */
static
SCIP_RETCODE readSos(
   SCIP*                 scip,               /**< SCIP data structure */
   LPINPUT*              lpinput             /**< LP reading data */
   )
{
   SCIP_Bool initial, separate, enforce, check, propagate;
   SCIP_Bool local, dynamic, removable;
   char name[SCIP_MAXSTRLEN];
   int cnt = 0;

   assert(lpinput != NULL);

   /* standard settings for SOS constraints: */
   initial = lpinput->initialconss;
   separate = TRUE;
   enforce = TRUE;
   check = TRUE;
   propagate = TRUE;
   local = FALSE;
   dynamic = lpinput->dynamicconss;
   removable = lpinput->dynamicrows;

   while( getNextToken(scip, lpinput) )
   {
      int type = -1;
      SCIP_CONS* cons;

      /* check if we reached a new section */
      if( isNewSection(scip, lpinput) )
         return SCIP_OKAY;

      /* check for an SOS constraint name */
      *name = '\0';

      /* remember the token in the token buffer */
      swapTokenBuffer(lpinput);

      /* get the next token and check, whether it is a colon */
      if( getNextToken(scip, lpinput) )
      {
         if( strcmp(lpinput->token, ":") == 0 )
         {
            /* the second token was a colon: the first token is the constraint name */
            (void)SCIPmemccpy(name, lpinput->tokenbuf, '\0', SCIP_MAXSTRLEN);

            name[SCIP_MAXSTRLEN-1] = '\0';
         }
         else
         {
            /* the second token was no colon: push the tokens back onto the token stack and parse it next */
            pushToken(lpinput);
            pushBufferToken(lpinput);
         }
      }
      else
      {
         /* there was only one token left: push it back onto the token stack and parse it next */
         pushBufferToken(lpinput);
      }

      /* get type */
      if( !getNextToken(scip, lpinput) )
      {
         syntaxError(scip, lpinput, "expected SOS type: 'S1::' or 'S2::'.");
         return SCIP_OKAY;
      }
      /* check whether constraint name was left out */
      if( strcmp(lpinput->token, ":") == 0 )
      {
         /* we have to push twice ':' and once the type: */
         pushToken(lpinput);
         lpinput->token[0] = ':';
         lpinput->token[1] = '\0';
         pushToken(lpinput);
         swapTokenBuffer(lpinput);

         /* set artificial name */
         (void) SCIPsnprintf(name, SCIP_MAXSTRLEN, "SOS%d", ++cnt);
      }

      /* check whether it is type 1 or type 2 */
      if( strcmp(lpinput->token, "S1") == 0 )
      {
         type = 1;
         SCIP_CALL( SCIPcreateConsSOS1(scip, &cons, name, 0, NULL, NULL, initial, separate, enforce, check, propagate,
               local, dynamic, removable, FALSE) );
      }
      else if( strcmp(lpinput->token, "S2") == 0 )
      {
         type = 2;
         SCIP_CALL( SCIPcreateConsSOS2(scip, &cons, name, 0, NULL, NULL, initial, separate, enforce, check, propagate,
               local, dynamic, removable, FALSE) );
      }
      else
      {
         syntaxError(scip, lpinput, "SOS constraint type other than 1 or 2 appeared.");
         return SCIP_OKAY;
      }
      assert( type == 1 || type == 2 );

      SCIPdebugMsg(scip, "created SOS%d constraint <%s>\n", type, name);

      /* make sure that a colons follows */
      if( !getNextToken(scip, lpinput) || strcmp(lpinput->token, ":") != 0 )
      {
         syntaxError(scip, lpinput, "SOS constraint type has to be followed by two colons.");
         return SCIP_OKAY;
      }

      /* make sure that another colons follows */
      if( !getNextToken(scip, lpinput) || strcmp(lpinput->token, ":") != 0 )
      {
         syntaxError(scip, lpinput, "SOS constraint type has to be followed by two colons.");
         return SCIP_OKAY;
      }

      /* parse elements of SOS constraint */
      while( getNextToken(scip, lpinput) )
      {
         SCIP_VAR* var;
         SCIP_Real weight;

         /* check if we reached a new section */
         if( isNewSection(scip, lpinput) )
            break;

         /* remember the token in the token buffer */
         swapTokenBuffer(lpinput);

         /* get variable and colon */
         var = SCIPfindVar(scip, lpinput->tokenbuf);

         /* if token is a variable name */
         if( var == NULL )
         {
            pushBufferToken(lpinput);
            break;
         }
         else
         {
            SCIPdebugMsg(scip, "found variable <%s>\n", SCIPvarGetName(var));
            if( !getNextToken(scip, lpinput) || strcmp(lpinput->token, ":") != 0 )
            {
               syntaxError(scip, lpinput, "expected colon and weight.");
               return SCIP_OKAY;
            }
            /* check next token */
            if( !getNextToken(scip, lpinput) )
            {
               /* push back token, since it could be the name of a new constraint */
               pushToken(lpinput);
               pushBufferToken(lpinput);
               break;
            }
            else
            {
               int sign = +1;

               /* get sign */
               if( isSign(lpinput, &sign) )
               {
                  (void) getNextToken(scip, lpinput);
               }

               /* get weight */
               if( !isValue(scip, lpinput, &weight) )
               {
                  /* push back token, since it could be the name of a new constraint */
                  pushToken(lpinput);
                  pushBufferToken(lpinput);
                  break;
               }
               else
               {
                  /* we now know that we have a variable/weight pair -> add variable*/
                  switch( type )
                  {
                  case 1: 
                     SCIP_CALL( SCIPaddVarSOS1(scip, cons, var, sign * weight) );
                     break;
                  case 2: 
                     SCIP_CALL( SCIPaddVarSOS2(scip, cons, var, sign * weight) );
                     break;
                  default: 
                     SCIPerrorMessage("unknown SOS type: <%d>\n", type); /* should not happen */
                     SCIPABORT();
                     return SCIP_INVALIDDATA;  /*lint !e527*/
                  }
                  SCIPdebugMsg(scip, "added variable <%s> with weight %g.\n", SCIPvarGetName(var), weight);
               }
            }
         }
      }

      /* add the SOS constraint */
      SCIP_CALL( SCIPaddCons(scip, cons) );
      SCIPdebugMsg(scip, "(line %d) added constraint <%s>: ", lpinput->linenumber, SCIPconsGetName(cons));
      SCIPdebugPrintCons(scip, cons, NULL);
      SCIP_CALL( SCIPreleaseCons(scip, &cons) );
   }

   return SCIP_OKAY;
}

/** reads an LP file
 *
 *  @todo check whether variables forced to be binary for the creation of indicator constraints are
 *  really specified to be binary (or general with 0/1 bounds) in the file.
 */
static
SCIP_RETCODE readLPFile(
   SCIP*                 scip,               /**< SCIP data structure */
   LPINPUT*              lpinput,            /**< LP reading data */
   const char*           filename            /**< name of the input file */
   )
{
   assert(lpinput != NULL);

   /* open file */
   lpinput->file = SCIPfopen(filename, "r");
   if( lpinput->file == NULL )
   {
      SCIPerrorMessage("cannot open file <%s> for reading\n", filename);
      SCIPprintSysError(filename);
      return SCIP_NOFILE;
   }

   /* create problem */
   SCIP_CALL( SCIPcreateProb(scip, filename, NULL, NULL, NULL, NULL, NULL, NULL, NULL) );

   /* parse the file */
   lpinput->section = LP_START;
   while( lpinput->section != LP_END && !hasError(lpinput) )
   {
      switch( lpinput->section )
      {
      case LP_START:
         SCIP_CALL( readStart(scip, lpinput) );
         break;

      case LP_OBJECTIVE:
         SCIP_CALL( readObjective(scip, lpinput) );
         break;

      case LP_CONSTRAINTS:
         SCIP_CALL( readConstraints(scip, lpinput) );
         break;

      case LP_BOUNDS:
         SCIP_CALL( readBounds(scip, lpinput) );
         break;

      case LP_GENERALS:
         SCIP_CALL( readGenerals(scip, lpinput) );
         break;

      case LP_BINARIES:
         SCIP_CALL( readBinaries(scip, lpinput) );
         break;

      case LP_SEMICONTINUOUS:
         SCIP_CALL( readSemicontinuous(scip, lpinput) );
         break;

      case LP_SOS:
         SCIP_CALL( readSos(scip, lpinput) );
         break;

      case LP_END: /* this is already handled in the while() loop */
      default:
         SCIPerrorMessage("invalid LP file section <%d>\n", lpinput->section);
         return SCIP_INVALIDDATA;
      }
   }

   /* close file */
   SCIPfclose(lpinput->file);

   return SCIP_OKAY;
}


/*
 * Local methods (for writing)
 */

/** hash key retrieval function for variables */
static
SCIP_DECL_HASHGETKEY(hashGetKeyVar)
{  /*lint --e{715}*/
   return elem;
}

/** returns TRUE iff the indices of both variables are equal */
static
SCIP_DECL_HASHKEYEQ(hashKeyEqVar)
{  /*lint --e{715}*/
   if( key1 == key2 )
      return TRUE;
   return FALSE;
}

/** returns the hash value of the key */
static
SCIP_DECL_HASHKEYVAL(hashKeyValVar)
{  /*lint --e{715}*/
   assert( SCIPvarGetIndex((SCIP_VAR*) key) >= 0 );
   return (unsigned int) SCIPvarGetIndex((SCIP_VAR*) key);
}

/** transforms given variables, scalars, and constant to the corresponding active variables, scalars, and constant */
static
SCIP_RETCODE getActiveVariables(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_VAR***           vars,               /**< pointer to vars array to get active variables for */
   SCIP_Real**           scalars,            /**< pointer to scalars a_1, ..., a_n in linear sum a_1*x_1 + ... + a_n*x_n + c */
   int*                  nvars,              /**< pointer to number of variables and values in vars and vals array */
   SCIP_Real*            constant,           /**< pointer to constant c in linear sum a_1*x_1 + ... + a_n*x_n + c  */
   SCIP_Bool             transformed         /**< transformed constraint? */
   )
{
   int requiredsize;
   int v;

   assert(scip != NULL);
   assert(vars != NULL);
   assert(scalars != NULL);
   assert(nvars != NULL);
   assert(*vars != NULL || *nvars == 0);
   assert(*scalars != NULL || *nvars == 0);
   assert(constant != NULL);

   if( transformed )
   {
      SCIP_CALL( SCIPgetProbvarLinearSum(scip, *vars, *scalars, nvars, *nvars, constant, &requiredsize, TRUE) );

      if( requiredsize > *nvars )
      {
         SCIP_CALL( SCIPreallocBufferArray(scip, vars, requiredsize) );
         SCIP_CALL( SCIPreallocBufferArray(scip, scalars, requiredsize) );

         SCIP_CALL( SCIPgetProbvarLinearSum(scip, *vars, *scalars, nvars, requiredsize, constant, &requiredsize, TRUE) );
         assert( requiredsize <= *nvars );
      }
   }
   else
   {
      if( *nvars > 0 && ( *vars == NULL || *scalars == NULL ) ) /*lint !e774 !e845*/
      {
         SCIPerrorMessage("Null pointer in LP reader\n"); /* should not happen */
         SCIPABORT();
         return SCIP_INVALIDDATA;  /*lint !e527*/
      }

      for( v = 0; v < *nvars; ++v )
      {
         SCIP_CALL( SCIPvarGetOrigvarSum(&(*vars)[v], &(*scalars)[v], constant) );

         /* negated variables with an original counterpart may also be returned by SCIPvarGetOrigvarSum();
          * make sure we get the original variable in that case
          */
         if( SCIPvarGetStatus((*vars)[v]) == SCIP_VARSTATUS_NEGATED )
         {
            (*vars)[v] = SCIPvarGetNegatedVar((*vars)[v]);
            *constant += (*scalars)[v];
            (*scalars)[v] *= -1.0;
         }
      }
   }
   return SCIP_OKAY;
}

/** clears the given line buffer */
static
void clearLine(
   char*                 linebuffer,         /**< line */
   int*                  linecnt             /**< number of characters in line */
   )
{
   assert( linebuffer != NULL );
   assert( linecnt != NULL );

   (*linecnt) = 0;
   linebuffer[0] = '\0';
}

/** ends the given line with '\\0' and prints it to the given file stream */
static
void endLine(
   SCIP*                 scip,               /**< SCIP data structure */
   FILE*                 file,               /**< output file (or NULL for standard output) */
   char*                 linebuffer,         /**< line */
   int*                  linecnt             /**< number of characters in line */
   )
{
   assert( scip != NULL );
   assert( linebuffer != NULL );
   assert( linecnt != NULL );
   assert( 0 <= *linecnt && *linecnt < LP_MAX_PRINTLEN );

   if( (*linecnt) > 0 )
   {
      linebuffer[(*linecnt)] = '\0';
      SCIPinfoMessage(scip, file, "%s\n", linebuffer);
      clearLine(linebuffer, linecnt);
   }
}

/** appends extension to line and prints it to the give file stream if the
 *  line exceeded the length given in the define LP_PRINTLEN */
static
void appendLine(
   SCIP*                 scip,               /**< SCIP data structure */
   FILE*                 file,               /**< output file (or NULL for standard output) */
   char*                 linebuffer,         /**< line */
   int*                  linecnt,            /**< number of characters in line */
   const char*           extension           /**< string to extent the line */
   )
{
   assert( scip != NULL );
   assert( linebuffer != NULL );
   assert( linecnt != NULL );
   assert( extension != NULL );
   assert( strlen(linebuffer) + strlen(extension) < LP_MAX_PRINTLEN );

   /* NOTE: avoid
    *   sprintf(linebuffer, "%s%s", linebuffer, extension); 
    * because of overlapping memory areas in memcpy used in sprintf.
    */
   (void) strncat(linebuffer, extension, LP_MAX_PRINTLEN - strlen(linebuffer));

   (*linecnt) += (int) strlen(extension);

   SCIPdebugMsg(scip, "linebuffer <%s>, length = %lu\n", linebuffer, (unsigned long)strlen(linebuffer));

   if( (*linecnt) > LP_PRINTLEN )
      endLine(scip, file, linebuffer, linecnt);
}


/* print row in LP format to file stream */
static
SCIP_RETCODE printRow(
   SCIP*                 scip,               /**< SCIP data structure */
   FILE*                 file,               /**< output file (or NULL for standard output) */
   const char*           rowname,            /**< row name */
   const char*           rownameextension,   /**< row name extension */
   const char*           type,               /**< row type ("=", "<=", or ">=") */
   SCIP_VAR**            linvars,            /**< array of linear variables */
   SCIP_Real*            linvals,            /**< array of linear coefficient values */
   int                   nlinvars,           /**< number of linear variables */
   SCIP_EXPR*            quadexpr,           /**< quadratic expression */
   SCIP_Real             rhs,                /**< right hand side */
   SCIP_Bool             transformed         /**< transformed constraint? */
   )
{
   int v;
   char linebuffer[LP_MAX_PRINTLEN+1] = { '\0' };
   int linecnt;

   char varname[LP_MAX_NAMELEN];
   char varname2[LP_MAX_NAMELEN];
   char consname[LP_MAX_NAMELEN + 1]; /* an extra character for ':' */
   char buffer[LP_MAX_PRINTLEN];

   assert( scip != NULL );
   assert( strcmp(type, "=") == 0 || strcmp(type, "<=") == 0 || strcmp(type, ">=") == 0 );
   assert( nlinvars == 0 || (linvars != NULL && linvals != NULL) );

   clearLine(linebuffer, &linecnt);

   /* start each line with a space */
   appendLine(scip, file, linebuffer, &linecnt, " ");

   /* print row name */
   if( strlen(rowname) > 0 || strlen(rownameextension) > 0 )
   {
      (void) SCIPsnprintf(consname, LP_MAX_NAMELEN + 1, "%s%s:", rowname, rownameextension);
      appendLine(scip, file, linebuffer, &linecnt, consname);
   }

   /* print coefficients */
   for( v = 0; v < nlinvars; ++v )
   {
      SCIP_VAR* var;

      assert(linvars != NULL);  /* for lint */
      assert(linvals != NULL);

      var = linvars[v];
      assert( var != NULL );

      /* we start a new line; therefore we tab this line */
      if( linecnt == 0 )
         appendLine(scip, file, linebuffer, &linecnt, " ");

      (void) SCIPsnprintf(varname, LP_MAX_NAMELEN, "%s", SCIPvarGetName(var));
      (void) SCIPsnprintf(buffer, LP_MAX_PRINTLEN, " %+.15g %s", linvals[v], varname);

      appendLine(scip, file, linebuffer, &linecnt, buffer);
   }

   /* print quadratic part */
   if( quadexpr != NULL )
   {
      SCIP_EXPR** linexprs;
      SCIP_VAR** activevars;
      SCIP_Real* activevals;
      SCIP_Real* lincoefs;
      SCIP_Real constant;
      SCIP_Real activeconstant = 0.0;
      int nbilinexprterms;
      int nactivevars;
      int nquadexprs;
      int nlinexprs;

      /* get data from the quadratic expression */
      SCIPexprGetQuadraticData(quadexpr, &constant, &nlinexprs, &linexprs, &lincoefs, &nquadexprs, &nbilinexprterms,
            NULL, NULL);

      /* allocate memory to store active linear variables */
      SCIP_CALL( SCIPallocBufferArray(scip, &activevars, nlinexprs) );
      SCIP_CALL( SCIPduplicateBufferArray(scip, &activevals, lincoefs, nlinexprs) );
      nactivevars = nlinexprs;

      for( v = 0; v < nlinexprs; ++v )
      {
         assert(linexprs != NULL && linexprs[v] != NULL);
         assert(SCIPisExprVar(scip, linexprs[v]));

         activevars[v] = SCIPgetVarExprVar(linexprs[v]);
         assert(activevars[v] != NULL);
      }

      /* get active variables */
      SCIP_CALL( getActiveVariables(scip, &activevars, &activevals, &nactivevars, &activeconstant, transformed) );
      constant += activeconstant;

      /* print linear coefficients of linear variables */
      for( v = 0; v < nactivevars; ++v )
      {
         SCIP_VAR* var;

         assert(activevars != NULL);  /* for lint */
         assert(activevals != NULL);

         var = activevars[v];
         assert( var != NULL );

         /* we start a new line; therefore we tab this line */
         if( linecnt == 0 )
            appendLine(scip, file, linebuffer, &linecnt, " ");

         (void) SCIPsnprintf(varname, LP_MAX_NAMELEN, "%s", SCIPvarGetName(var));
         (void) SCIPsnprintf(buffer, LP_MAX_PRINTLEN, " %+.15g %s", activevals[v], varname);

         appendLine(scip, file, linebuffer, &linecnt, buffer);
      }

      /* free memory for active linear variables */
      SCIPfreeBufferArray(scip, &activevals);
      SCIPfreeBufferArray(scip, &activevars);

      /* adjust rhs if there is a constant */
      if( constant != 0.0 && !SCIPisInfinity(scip, rhs) )
         rhs -= constant;

      /* print linear coefficients of quadratic variables */
      for( v = 0; v < nquadexprs; ++v )
      {
         SCIP_EXPR* expr;
         SCIP_VAR* var;
         SCIP_Real lincoef;

         /* get linear coefficient and variable of quadratic term */
         SCIPexprGetQuadraticQuadTerm(quadexpr, v, &expr, &lincoef, NULL, NULL, NULL, NULL);
         assert(expr != NULL);
         assert(SCIPisExprVar(scip, expr));

         var = SCIPgetVarExprVar(expr);
         assert(var != NULL);

         if( lincoef == 0.0 )
            continue;

         /* we start a new line; therefore we tab this line */
         if( linecnt == 0 )
            appendLine(scip, file, linebuffer, &linecnt, " ");

         (void) SCIPsnprintf(varname, LP_MAX_NAMELEN, "%s", SCIPvarGetName(var));
         (void) SCIPsnprintf(buffer, LP_MAX_PRINTLEN, " %+.15g %s", lincoef, varname);

         appendLine(scip, file, linebuffer, &linecnt, buffer);
      }

      /* start quadratic part */
      appendLine(scip, file, linebuffer, &linecnt, " + [");

      /* print square terms */
      for( v = 0; v < nquadexprs; ++v )
      {
         SCIP_EXPR* expr;
         SCIP_VAR* var;
         SCIP_Real sqrcoef;

         /* get square coefficient and variable of quadratic term */
         SCIPexprGetQuadraticQuadTerm(quadexpr, v, &expr, NULL, &sqrcoef, NULL, NULL, NULL);
         assert(expr != NULL);
         assert(SCIPisExprVar(scip, expr));

         var = SCIPgetVarExprVar(expr);
         assert(var != NULL);

         if( sqrcoef == 0.0 )
            continue;

         /* we start a new line; therefore we tab this line */
         if( linecnt == 0 )
            appendLine(scip, file, linebuffer, &linecnt, " ");

         (void) SCIPsnprintf(varname, LP_MAX_NAMELEN, "%s", SCIPvarGetName(var));
         (void) SCIPsnprintf(buffer, LP_MAX_PRINTLEN, " %+.15g %s^2", sqrcoef, varname);

         appendLine(scip, file, linebuffer, &linecnt, buffer);
      }

      /* print bilinear terms */
      for( v = 0; v < nbilinexprterms; ++v )
      {
         SCIP_EXPR* expr1;
         SCIP_EXPR* expr2;
         SCIP_VAR* var1;
         SCIP_VAR* var2;
         SCIP_Real bilincoef;

         /* get coefficient and variables of bilinear */
         SCIPexprGetQuadraticBilinTerm(quadexpr, v, &expr1, &expr2, &bilincoef, NULL, NULL);
         assert(expr1 != NULL);
         assert(SCIPisExprVar(scip, expr1));
         assert(expr2 != NULL);
         assert(SCIPisExprVar(scip, expr2));

         var1 = SCIPgetVarExprVar(expr1);
         assert(var1 != NULL);
         var2 = SCIPgetVarExprVar(expr2);
         assert(var2 != NULL);

         /* we start a new line; therefore we tab this line */
         if( linecnt == 0 )
            appendLine(scip, file, linebuffer, &linecnt, " ");

         (void) SCIPsnprintf(varname,  LP_MAX_NAMELEN, "%s", SCIPvarGetName(var1));
         (void) SCIPsnprintf(varname2, LP_MAX_NAMELEN, "%s", SCIPvarGetName(var2));
         (void) SCIPsnprintf(buffer, LP_MAX_PRINTLEN, " %+.15g %s * %s", bilincoef, varname, varname2);

         appendLine(scip, file, linebuffer, &linecnt, buffer);
      }

      /* end quadratic part */
      appendLine(scip, file, linebuffer, &linecnt, " ]");
   }

   /* print left hand side */
   if( SCIPisZero(scip, rhs) )
      rhs = 0.0;

   (void) SCIPsnprintf(buffer, LP_MAX_PRINTLEN, " %s %+.15g", type, rhs);

   /* we start a new line; therefore we tab this line */
   if( linecnt == 0 )
      appendLine(scip, file, linebuffer, &linecnt, " ");
   appendLine(scip, file, linebuffer, &linecnt, buffer);

   endLine(scip, file, linebuffer, &linecnt);

   return SCIP_OKAY;
}

/** prints given (linear or) quadratic constraint information in LP format to file stream */
static
SCIP_RETCODE printQuadraticCons(
   SCIP*                 scip,               /**< SCIP data structure */
   FILE*                 file,               /**< output file (or NULL for standard output) */
   const char*           rowname,            /**< name of the row */
   SCIP_VAR**            linvars,            /**< array of linear variables */
   SCIP_Real*            linvals,            /**< array of linear coefficients values (or NULL if all linear coefficient values are 1) */
   int                   nlinvars,           /**< number of linear variables */
   SCIP_EXPR*            quadexpr,           /**< quadratic expression (or NULL if nlinvars > 0) */
   SCIP_Real             lhs,                /**< left hand side */
   SCIP_Real             rhs,                /**< right hand side */
   SCIP_Bool             transformed         /**< transformed constraint? */
   )
{
   int v;
   SCIP_VAR** activevars = NULL;
   SCIP_Real* activevals = NULL;
   int nactivevars;
   SCIP_Real activeconstant = 0.0;

   assert( scip != NULL );
   assert( rowname != NULL );
   assert( quadexpr == NULL || nlinvars == 0);

   /* The LP format does not forbid that the variable array is empty */
   assert( nlinvars == 0 || linvars != NULL );
   assert( lhs <= rhs );

   if( SCIPisInfinity(scip, -lhs) && SCIPisInfinity(scip, rhs) )
      return SCIP_OKAY;

   nactivevars = nlinvars;
   if( nlinvars > 0 )
   {
      /* duplicate variable and value array */
      SCIP_CALL( SCIPduplicateBufferArray(scip, &activevars, linvars, nactivevars ) );
      if( linvals != NULL )
      {
         SCIP_CALL( SCIPduplicateBufferArray(scip, &activevals, linvals, nactivevars ) );
      }
      else
      {
         SCIP_CALL( SCIPallocBufferArray(scip, &activevals, nactivevars) );

         for( v = 0; v < nactivevars; ++v )
            activevals[v] = 1.0;
      }

      /* retransform given variables to active variables */
      SCIP_CALL( getActiveVariables(scip, &activevars, &activevals, &nactivevars, &activeconstant, transformed) );
   }

   /* print row(s) in LP format */
   if( SCIPisEQ(scip, lhs, rhs) )
   {
      assert( !SCIPisInfinity(scip, rhs) );

      /* equal constraint */
      SCIP_CALL( printRow(scip, file, rowname, "", "=", activevars, activevals, nactivevars, quadexpr,
         rhs - activeconstant, transformed) );
   }
   else
   {
      if( !SCIPisInfinity(scip, -lhs) )
      {
         /* print inequality ">=" */
         SCIP_CALL( printRow(scip, file, rowname, SCIPisInfinity(scip, rhs) ? "" : "_lhs", ">=", activevars, activevals,
            nactivevars, quadexpr, lhs - activeconstant, transformed) );
      }
      if( !SCIPisInfinity(scip, rhs) )
      {
         /* print inequality "<=" */
         SCIP_CALL( printRow(scip, file, rowname, SCIPisInfinity(scip, -lhs) ? "" : "_rhs", "<=", activevars, activevals,
            nactivevars, quadexpr, rhs - activeconstant, transformed) );
      }
   }

   if( nlinvars > 0 )
   {
      /* free buffer arrays */
      SCIPfreeBufferArray(scip, &activevals);
      SCIPfreeBufferArray(scip, &activevars);
   }

   return SCIP_OKAY;
}

/** prints given SOS constraint information in LP format to file stream */
static
void printSosCons(
   SCIP*                 scip,               /**< SCIP data structure */
   FILE*                 file,               /**< output file (or NULL for standard output) */
   const char*           rowname,            /**< name of the row */
   SCIP_VAR**            vars,               /**< array of variables */
   SCIP_Real*            weights,            /**< array of weight values (or NULL) */
   int                   nvars,              /**< number of variables */
   int                   type                /**< SOS type (SOS1 or SOS2) */
   )
{
   int v;

   char linebuffer[LP_MAX_PRINTLEN+1];
   int linecnt;
   char buffer[LP_MAX_PRINTLEN];
   char varname[LP_MAX_NAMELEN];

   assert( scip != NULL );
   assert( file != NULL );
   assert( type == 1 || type == 2 );

   clearLine(linebuffer, &linecnt);

   /* start each line with a space */
   appendLine(scip, file, linebuffer, &linecnt, " ");
   assert( strlen(rowname) < LP_MAX_NAMELEN );

   if( strlen(rowname) > 0 )
   {
      (void) SCIPsnprintf(buffer, LP_MAX_PRINTLEN, "%s:", rowname);
      appendLine(scip, file, linebuffer, &linecnt, buffer);
   }

   /* SOS type */
   (void) SCIPsnprintf(buffer, LP_MAX_PRINTLEN, " S%d::", type);
   appendLine(scip, file, linebuffer, &linecnt, buffer);

   for( v = 0; v < nvars; ++v )
   {
      (void) SCIPsnprintf(varname, LP_MAX_NAMELEN, "%s", SCIPvarGetName(vars[v]));

      if( weights != NULL )
         (void) SCIPsnprintf(buffer, LP_MAX_PRINTLEN, " %s:%.15g", varname, weights[v]);
      else
         (void) SCIPsnprintf(buffer, LP_MAX_PRINTLEN, " %s:%d", varname, v);

      if(linecnt == 0 )
      {
         /* we start a new line; therefore we tab this line */
         appendLine(scip, file, linebuffer, &linecnt, " ");
      }
      appendLine(scip, file, linebuffer, &linecnt, buffer);
   }

   endLine(scip, file, linebuffer, &linecnt);
}

/** prints a linearization of an and-constraint into the given file */
static
SCIP_RETCODE printAndCons(
   SCIP*                 scip,               /**< SCIP data structure */
   FILE*                 file,               /**< output file (or NULL for standard output) */
   const char*           consname,           /**< name of the constraint */
   SCIP_CONS*            cons,               /**< and constraint */
   SCIP_Bool             aggrlinearizationands,/**< print weak or strong realaxation */
   SCIP_Bool             transformed         /**< transformed constraint? */
   )
{
   SCIP_VAR** vars;
   SCIP_VAR** operands;
   SCIP_VAR* resultant;
   SCIP_Real* vals;
   char rowname[LP_MAX_NAMELEN];
   int nvars;
   int v;

   assert(scip != NULL);
   assert(consname != NULL);
   assert(cons != NULL);

   nvars = SCIPgetNVarsAnd(scip, cons);
   operands = SCIPgetVarsAnd(scip, cons);
   resultant = SCIPgetResultantAnd(scip, cons);

   /* allocate buffer array */
   SCIP_CALL( SCIPallocBufferArray(scip, &vars, nvars + 1) );
   SCIP_CALL( SCIPallocBufferArray(scip, &vals, nvars + 1) );

   /* the tight relaxtion, number of and-constraint operands rows */
   if( !aggrlinearizationands )
   {
      vars[0] = resultant;
      vals[0] = 1.0;
      vals[1] = -1.0;

      /* print operator rows */
      for( v = 0; v < nvars; ++v )
      {
         (void) SCIPsnprintf(rowname, LP_MAX_NAMELEN, "%s_%d", consname, v);
         vars[1] = operands[v];

         /* print for each operator a row */
         SCIP_CALL( printQuadraticCons(scip, file, rowname, vars, vals, 2, NULL, -SCIPinfinity(scip), 0.0,
            transformed) );
      }
   }

   /* prepare for next row */
   for( v = nvars - 1; v >= 0; --v )
   {
      vars[v] = operands[v];
      vals[v] = -1.0;
   }

   vars[nvars] = resultant;

   /* the weak relaxtion, only one constraint */
   if( aggrlinearizationands )
   {
      /* adjust rowname of constraint */
      (void) SCIPsnprintf(rowname, LP_MAX_NAMELEN, "%s_operators", consname);

      vals[nvars] = (SCIP_Real) nvars;

      /* print aggregated operator row */
      SCIP_CALL( printQuadraticCons(scip, file, rowname, vars, vals, nvars + 1, NULL, -SCIPinfinity(scip), 0.0,
         transformed) );
   }

   /* create additional linear constraint */
   (void) SCIPsnprintf(rowname, LP_MAX_NAMELEN, "%s_add", consname);

   vals[nvars] = 1.0;

   SCIP_CALL( printQuadraticCons(scip, file, rowname, vars, vals, nvars + 1, NULL, -nvars + 1.0, SCIPinfinity(scip),
      transformed) );

   /* free buffer array */
   SCIPfreeBufferArray(scip, &vals);
   SCIPfreeBufferArray(scip, &vars);

   return SCIP_OKAY;
}

/** check whether given variables are aggregated and put them into an array without duplication */
static
SCIP_RETCODE collectAggregatedVars(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_VAR**            vars,               /**< variable array */
   int                   nvars,              /**< number of active variables in the problem */
   SCIP_VAR***           aggvars,            /**< pointer to array storing the aggregated variables on output */
   int*                  naggvars,           /**< pointer to number of aggregated variables on output */
   int*                  saggvars,           /**< pointer to number of slots in aggvars array */
   SCIP_HASHTABLE*       varAggregated       /**< hashtable for checking duplicates */
   )
{
   int v;

   assert( scip != NULL );
   assert( aggvars != NULL );
   assert( naggvars != NULL );
   assert( saggvars != NULL );

   /* check variables */
   for( v = 0; v < nvars; ++v )
   {
      SCIP_VARSTATUS status;
      SCIP_VAR* var;

      var = vars[v];
      status = SCIPvarGetStatus(var);

      /* collect aggregated variables in a list */
      if( status >= SCIP_VARSTATUS_AGGREGATED )
      {
         assert( status == SCIP_VARSTATUS_AGGREGATED || status == SCIP_VARSTATUS_MULTAGGR || status == SCIP_VARSTATUS_NEGATED );
         assert( varAggregated != NULL );

         if( ! SCIPhashtableExists(varAggregated, (void*) var) )
         {
            /* possibly enlarge array */
            if ( *saggvars <= *naggvars )
            {
               int newsize;
               newsize = SCIPcalcMemGrowSize(scip, *naggvars + 1);
               assert( newsize > *saggvars );
               SCIP_CALL( SCIPreallocBlockMemoryArray(scip, &aggvars, *saggvars, newsize) );
               *saggvars = newsize;
            }

            (*aggvars)[*naggvars] = var;
            (*naggvars)++;
            SCIP_CALL( SCIPhashtableInsert(varAggregated, (void*) var) );
            assert( *naggvars <= *saggvars );
         }
      }
   }
   return SCIP_OKAY;
}

/** print aggregated variable-constraints */
static
SCIP_RETCODE printAggregatedCons(
   SCIP*                 scip,               /**< SCIP data structure */
   FILE*                 file,               /**< output file (or NULL for standard output) */
   SCIP_Bool             transformed,        /**< TRUE iff problem is the transformed problem */
   int                   nvars,              /**< number of active variables in the problem */
   int                   nAggregatedVars,    /**< number of aggregated variables */
   SCIP_VAR**            aggregatedVars      /**< array storing the aggregated variables */
   )
{
   int j;

   SCIP_VAR** activevars;
   SCIP_Real* activevals;
   int nactivevars;
   SCIP_Real activeconstant = 0.0;
   char consname[LP_MAX_NAMELEN];

   assert( scip != NULL );

   /* write aggregation constraints */
   SCIP_CALL( SCIPallocBufferArray(scip, &activevars, nvars) );
   SCIP_CALL( SCIPallocBufferArray(scip, &activevals, nvars) );

   for( j = 0; j < nAggregatedVars; ++j )
   {
      /* set up list to obtain substitution variables */
      nactivevars = 1;

      activevars[0] = aggregatedVars[j];
      activevals[0] = 1.0;
      activeconstant = 0.0;

      /* retransform given variables to active variables */
      SCIP_CALL( getActiveVariables(scip, &activevars, &activevals, &nactivevars, &activeconstant, transformed) );

      activevals[nactivevars] = -1.0;
      activevars[nactivevars] = aggregatedVars[j];
      ++nactivevars;

      /* output constraint */
      (void) SCIPsnprintf(consname, LP_MAX_NAMELEN, "aggr_%s", SCIPvarGetName(aggregatedVars[j]));
      SCIP_CALL( printRow(scip, file, consname, "", "=", activevars, activevals, nactivevars, NULL, - activeconstant,
         transformed) );
   }

   /* free buffer arrays */
   SCIPfreeBufferArray(scip, &activevals);
   SCIPfreeBufferArray(scip, &activevars);

   return SCIP_OKAY;
}

/** method check if the variable names are not longer than LP_MAX_NAMELEN */
static
void checkVarnames(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_VAR**            vars,               /**< array of variables */
   int                   nvars               /**< number of variables */
   )
{
   SCIP_Bool printwarning;
   int v;

   assert(scip != NULL);
   assert(vars != NULL || nvars == 0);

   printwarning = TRUE;

   /* check if the variable names are not to long */
   for( v = 0; v < nvars; ++v )
   {
      if( strlen(SCIPvarGetName(vars[v])) > LP_MAX_NAMELEN )  /*lint !e613*/
      {
         SCIPwarningMessage(scip, "there is a variable name which has to be cut down to %d characters; LP might be corrupted\n", 
            LP_MAX_NAMELEN - 1);
         return;
      }

      /* check if variable name starts with a digit */
      if( printwarning && isdigit((unsigned char)SCIPvarGetName(vars[v])[0]) ) /*lint !e613*/
      {
         SCIPwarningMessage(scip, "violation of LP format - a variable name starts with a digit; " \
            "it is not possible to read the generated LP file with SCIP; " \
            "use write/genproblem or write/gentransproblem for generic variable names\n");
         printwarning = FALSE;
      }
   }
}

/** method check if the constraint names are not longer than LP_MAX_NAMELEN */
static
void checkConsnames(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_CONS**           conss,              /**< array of constraints */
   int                   nconss,             /**< number of constraints */
   SCIP_Bool             transformed         /**< TRUE iff problem is the transformed problem */
   )
{
   int c;
   SCIP_CONS* cons;
   SCIP_CONSHDLR* conshdlr;
   const char* conshdlrname;
   SCIP_Bool printwarning = TRUE;

   assert( scip != NULL );
   assert( conss != NULL || nconss == 0 );

   for( c = 0; c < nconss; ++c )
   {
      int len;

      assert(conss != NULL); /* for lint */
      cons = conss[c];
      assert(cons != NULL );

      /* in case the transformed is written only constraints are posted which are enabled in the current node */
      assert(!transformed || SCIPconsIsEnabled(cons));

      conshdlr = SCIPconsGetHdlr(cons);
      assert( conshdlr != NULL );

      conshdlrname = SCIPconshdlrGetName(conshdlr);
      assert( transformed == SCIPconsIsTransformed(cons) );

      len = (int) strlen(SCIPconsGetName(cons));

      if( strcmp(conshdlrname, "linear") == 0 )
      {
         SCIP_Real lhs = SCIPgetLhsLinear(scip, cons);
         SCIP_Real rhs = SCIPgetRhsLinear(scip, cons);

         if( (SCIPisEQ(scip, lhs, rhs) && len > LP_MAX_NAMELEN) || ( !SCIPisEQ(scip, lhs, rhs) && len > LP_MAX_NAMELEN - 4) )
         {
            SCIPwarningMessage(scip, "there is a constraint name which has to be cut down to %d characters;\n", LP_MAX_NAMELEN - 1);
            return;
         }
      }
      else if( len > LP_MAX_NAMELEN )
      {
         SCIPwarningMessage(scip, "there is a constraint name which has to be cut down to %d characters;\n", LP_MAX_NAMELEN - 1);
         return;
      }

      /* check if constraint name starts with a digit */
      if( printwarning && isdigit((unsigned char)SCIPconsGetName(cons)[0]) )
      {
         SCIPwarningMessage(scip, "violation of LP format - a constraint name starts with a digit; " \
            "it is not possible to read the generated LP file with SCIP; " \
            "use write/genproblem or write/gentransproblem for generic variable names\n");
         printwarning = FALSE;
      }
   }
}

/*
 * Callback methods of reader
 */

/** copy method for reader plugins (called when SCIP copies plugins) */
static
SCIP_DECL_READERCOPY(readerCopyLp)
{  /*lint --e{715}*/
   assert(scip != NULL);
   assert(reader != NULL);
   assert(strcmp(SCIPreaderGetName(reader), READER_NAME) == 0);

   /* call inclusion method of reader */
   SCIP_CALL( SCIPincludeReaderLp(scip) );

   return SCIP_OKAY;
}

/** destructor of reader to free user data (called when SCIP is exiting) */
static
SCIP_DECL_READERFREE(readerFreeLp)
{
   SCIP_READERDATA* readerdata;

   assert(strcmp(SCIPreaderGetName(reader), READER_NAME) == 0);
   readerdata = SCIPreaderGetData(reader);
   assert(readerdata != NULL);
   SCIPfreeBlockMemory(scip, &readerdata);

   return SCIP_OKAY;
}

/** problem reading method of reader */
static
SCIP_DECL_READERREAD(readerReadLp)
{  /*lint --e{715}*/

   SCIP_CALL( SCIPreadLp(scip, reader, filename, result) );

   return SCIP_OKAY;
}


/** problem writing method of reader */
static
SCIP_DECL_READERWRITE(readerWriteLp)
{  /*lint --e{715}*/
   assert(reader != NULL);
   assert(strcmp(SCIPreaderGetName(reader), READER_NAME) == 0);

   SCIP_CALL( SCIPwriteLp(scip, file, name, transformed, objsense, objscale, objoffset, vars,
         nvars, nbinvars, nintvars, nimplvars, ncontvars, conss, nconss, result) );

   return SCIP_OKAY;
}


/*
 * reader specific interface methods
 */

/** includes the lp file reader in SCIP */
SCIP_RETCODE SCIPincludeReaderLp(
   SCIP*                 scip                /**< SCIP data structure */
   )
{
   SCIP_READERDATA* readerdata;
   SCIP_READER* reader;

   /* create reader data */
   SCIP_CALL( SCIPallocBlockMemory(scip, &readerdata) );

   /* include reader */
   SCIP_CALL( SCIPincludeReaderBasic(scip, &reader, READER_NAME, READER_DESC, READER_EXTENSION, readerdata) );

   /* set non fundamental callbacks via setter functions */
   SCIP_CALL( SCIPsetReaderCopy(scip, reader, readerCopyLp) );
   SCIP_CALL( SCIPsetReaderFree(scip, reader, readerFreeLp) );
   SCIP_CALL( SCIPsetReaderRead(scip, reader, readerReadLp) );
   SCIP_CALL( SCIPsetReaderWrite(scip, reader, readerWriteLp) );

   /* add lp-reader parameters */
   SCIP_CALL( SCIPaddBoolParam(scip,
         "reading/" READER_NAME "/linearize-and-constraints",
         "should possible \"and\" constraint be linearized when writing the lp file?",
         &readerdata->linearizeands, TRUE, DEFAULT_LINEARIZE_ANDS, NULL, NULL) );
   SCIP_CALL( SCIPaddBoolParam(scip,
         "reading/" READER_NAME "/aggrlinearization-ands",
         "should an aggregated linearization for and constraints be used?",
         &readerdata->aggrlinearizationands, TRUE, DEFAULT_AGGRLINEARIZATION_ANDS, NULL, NULL) );

   return SCIP_OKAY;
}


/** reads problem from file */
SCIP_RETCODE SCIPreadLp(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_READER*          reader,             /**< the file reader itself */
   const char*           filename,           /**< full path and name of file to read, or NULL if stdin should be used */
   SCIP_RESULT*          result              /**< pointer to store the result of the file reading call */
   )
{  /*lint --e{715}*/
   SCIP_RETCODE retcode;
   LPINPUT lpinput;
   int i;

   assert(scip != NULL);
   assert(reader != NULL);

   /* initialize LP input data */
   lpinput.file = NULL;
   SCIP_CALL( SCIPallocBlockMemoryArray(scip, &lpinput.linebuf, LP_MAX_LINELEN) );
   lpinput.linebuf[0] = '\0';
   lpinput.linebufsize = LP_MAX_LINELEN;
   lpinput.probname[0] = '\0';
   lpinput.objname[0] = '\0';
   SCIP_CALL( SCIPallocBlockMemoryArray(scip, &lpinput.token, LP_MAX_LINELEN) ); /*lint !e506*/
   lpinput.token[0] = '\0';
   SCIP_CALL( SCIPallocBlockMemoryArray(scip, &lpinput.tokenbuf, LP_MAX_LINELEN) ); /*lint !e506*/
   lpinput.tokenbuf[0] = '\0';
   for( i = 0; i < LP_MAX_PUSHEDTOKENS; ++i )
   {
      SCIP_CALL( SCIPallocBlockMemoryArray(scip, &(lpinput.pushedtokens[i]), LP_MAX_LINELEN) );  /*lint !e866 !e506*/
   }

   lpinput.npushedtokens = 0;
   lpinput.linenumber = 0;
   lpinput.linepos = 0;
   lpinput.section = LP_START;
   lpinput.objsense = SCIP_OBJSENSE_MINIMIZE;
   lpinput.inlazyconstraints = FALSE;
   lpinput.inusercuts = FALSE;
   lpinput.haserror = FALSE;

   SCIP_CALL( SCIPgetBoolParam(scip, "reading/initialconss", &(lpinput.initialconss)) );
   SCIP_CALL( SCIPgetBoolParam(scip, "reading/dynamicconss", &(lpinput.dynamicconss)) );
   SCIP_CALL( SCIPgetBoolParam(scip, "reading/dynamiccols", &(lpinput.dynamiccols)) );
   SCIP_CALL( SCIPgetBoolParam(scip, "reading/dynamicrows", &(lpinput.dynamicrows)) );

   /* read the file */
   retcode = readLPFile(scip, &lpinput, filename);

   /* free dynamically allocated memory */
   for( i = 0; i < LP_MAX_PUSHEDTOKENS; ++i )
   {
      SCIPfreeBlockMemoryArray(scip, &lpinput.pushedtokens[i], LP_MAX_LINELEN);
   }
   SCIPfreeBlockMemoryArray(scip, &lpinput.tokenbuf, LP_MAX_LINELEN);
   SCIPfreeBlockMemoryArray(scip, &lpinput.token, LP_MAX_LINELEN);
   SCIPfreeBlockMemoryArray(scip, &lpinput.linebuf, lpinput.linebufsize);

   if( retcode == SCIP_PLUGINNOTFOUND )
      retcode = SCIP_READERROR;

   /* check for correct return value */
   SCIP_CALL( retcode );

   /* evaluate the result */
   if( lpinput.haserror )
      return SCIP_READERROR;
   else
   {
      /* set objective sense */
      SCIP_CALL( SCIPsetObjsense(scip, lpinput.objsense) );
      *result = SCIP_SUCCESS;
   }

   return SCIP_OKAY;
}


/** writes problem to file */
SCIP_RETCODE SCIPwriteLp(
   SCIP*                 scip,               /**< SCIP data structure */
   FILE*                 file,               /**< output file, or NULL if standard output should be used */
   const char*           name,               /**< problem name */
   SCIP_Bool             transformed,        /**< TRUE iff problem is the transformed problem */
   SCIP_OBJSENSE         objsense,           /**< objective sense */
   SCIP_Real             objscale,           /**< scalar applied to objective function; external objective value is
                                              *   extobj = objsense * objscale * (intobj + objoffset) */
   SCIP_Real             objoffset,          /**< objective offset from bound shifting and fixing */
   SCIP_VAR**            vars,               /**< array with active variables ordered binary, integer, implicit, continuous */
   int                   nvars,              /**< number of active variables in the problem */
   int                   nbinvars,           /**< number of binary variables */
   int                   nintvars,           /**< number of general integer variables */
   int                   nimplvars,          /**< number of implicit integer variables */
   int                   ncontvars,          /**< number of continuous variables */
   SCIP_CONS**           conss,              /**< array with constraints of the problem */
   int                   nconss,             /**< number of constraints in the problem */
   SCIP_RESULT*          result              /**< pointer to store the result of the file writing call */
   )
{
   SCIP_READER* reader;
   SCIP_READERDATA* readerdata;
   SCIP_Bool linearizeands;
   SCIP_Bool aggrlinearizationands;
   int c;
   int v;

   int linecnt;
   char linebuffer[LP_MAX_PRINTLEN+1];

   char varname[LP_MAX_NAMELEN];
   char buffer[LP_MAX_PRINTLEN];

   SCIP_CONSHDLR* conshdlr;
   SCIP_CONSHDLR* conshdlrInd;
   const char* conshdlrname;
   SCIP_CONS* cons;
   SCIP_CONS** consSOS1;
   SCIP_CONS** consSOS2;
   SCIP_CONS** consExpr;
   SCIP_CONS** consIndicator;
   int nConsSOS1 = 0;
   int nConsSOS2 = 0;
   int nConsExpr = 0;
   int nConsIndicator = 0;
   char consname[LP_MAX_NAMELEN];

   SCIP_VAR** aggvars;
   SCIP_VAR** tmpvars;
   int tmpvarssize;
   int naggvars = 0;
   int saggvars;
   SCIP_HASHTABLE* varAggregated;
   SCIP_HASHMAP* consHidden;

   SCIP_VAR** consvars;
   SCIP_Real* consvals;
   int nconsvars;

   SCIP_VAR* var;
   SCIP_Real lb;
   SCIP_Real ub;

   SCIP_Bool zeroobj;

   assert(scip != NULL);

   /* find indicator constraint handler */
   conshdlrInd = SCIPfindConshdlr(scip, "indicator");
   consHidden = NULL;

   /* if indicator constraint handler is present */
   if( conshdlrInd != NULL )
   {
      /* create hashtable storing linear constraints that should not be output */
      SCIP_CALL( SCIPhashmapCreate(&consHidden, SCIPblkmem(scip), 500) );

      /* loop through indicator constraints (works only in transformed problem) */
      if( transformed )
      {
         SCIP_CONS** consInd;
         int nConsInd;

         consInd = SCIPconshdlrGetConss(conshdlrInd);
         nConsInd = SCIPconshdlrGetNConss(conshdlrInd);
         SCIPdebugMsg(scip, "Number of indicator constraints: %d\n", nConsInd);

         for( c = 0; c < nConsInd; ++c )
         {
            assert( consInd[c] != NULL );
            cons = SCIPgetLinearConsIndicator(consInd[c]);

            assert( !SCIPhashmapExists(consHidden, (void*) cons) );
            SCIP_CALL( SCIPhashmapSetImage(consHidden, (void*) cons, (void*) TRUE) );
            SCIPdebugMsg(scip, "Marked linear constraint <%s> as hidden.\n", SCIPconsGetName(cons));
         }
      }
      else
      {
         /* otherwise we have to pass through all constraints */
         for( c = 0; c < nconss; ++c )
         {
            cons = conss[c];
            assert( cons != NULL);

            conshdlr = SCIPconsGetHdlr(cons);
            assert( conshdlr != NULL );
            conshdlrname = SCIPconshdlrGetName(conshdlr);

            if( strcmp(conshdlrname, "indicator") == 0 )
            {
               SCIP_CONS* lincons;

               lincons = SCIPgetLinearConsIndicator(cons);
               assert( lincons != NULL );

               assert( !SCIPhashmapExists(consHidden, (void*) lincons) );
               SCIP_CALL( SCIPhashmapSetImage(consHidden, (void*) lincons, (void*) TRUE) );
               SCIPdebugMsg(scip, "Marked linear constraint <%s> as hidden.\n", SCIPconsGetName(lincons));
            }
         }
      }
   }

   /* check if the variable names are not to long */
   checkVarnames(scip, vars, nvars);
   /* check if the constraint names are to long */
   checkConsnames(scip, conss, nconss, transformed);

   /* print statistics as comment to file */
   SCIPinfoMessage(scip, file, "\\ SCIP STATISTICS\n");
   SCIPinfoMessage(scip, file, "\\   Problem name     : %s\n", name);
   SCIPinfoMessage(scip, file, "\\   Variables        : %d (%d binary, %d integer, %d implicit integer, %d continuous)\n",
      nvars, nbinvars, nintvars, nimplvars, ncontvars);
   SCIPinfoMessage(scip, file, "\\   Constraints      : %d\n", nconss);

   /* print objective sense */
   SCIPinfoMessage(scip, file, "%s\n", objsense == SCIP_OBJSENSE_MINIMIZE ? "Minimize" : "Maximize");

   clearLine(linebuffer, &linecnt);
   appendLine(scip, file, linebuffer, &linecnt, " Obj:");

   zeroobj = TRUE;
   for( v = 0; v < nvars; ++v )
   {
      var = vars[v];

#ifndef NDEBUG
      /* in case the original problem has to be written, the variables have to be either "original" or "negated" */
      if( ! transformed )
         assert( SCIPvarGetStatus(var) == SCIP_VARSTATUS_ORIGINAL || SCIPvarGetStatus(var) == SCIP_VARSTATUS_NEGATED );
#endif

      if( SCIPisZero(scip, SCIPvarGetObj(var)) )
         continue;

      zeroobj = FALSE;

      /* we start a new line; therefore we tab this line */
      if( linecnt == 0 )
         appendLine(scip, file, linebuffer, &linecnt, "     ");

      (void) SCIPsnprintf(varname, LP_MAX_NAMELEN, "%s", SCIPvarGetName(var));
      (void) SCIPsnprintf(buffer, LP_MAX_PRINTLEN, " %+.15g %s", objscale * SCIPvarGetObj(var), varname );

      appendLine(scip, file, linebuffer, &linecnt, buffer);
   }

   /* add objective offset */
   if ( ! SCIPisZero(scip, objoffset) )
   {
      (void) SCIPsnprintf(buffer, LP_MAX_PRINTLEN, " %+.15g", objscale * objoffset);
      appendLine(scip, file, linebuffer, &linecnt, buffer);
   }
   else
   {
      /* add a linear term to avoid troubles when reading the lp file with another MIP solver */
      if( zeroobj && nvars >= 1 )
      {
         (void) SCIPsnprintf(varname, LP_MAX_NAMELEN, "%s", SCIPvarGetName(vars[0]));
         (void) SCIPsnprintf(buffer, LP_MAX_PRINTLEN, " 0 %s", varname );

         appendLine(scip, file, linebuffer, &linecnt, buffer);
      }
   }

   endLine(scip, file, linebuffer, &linecnt);

   /* print "Subject to" section */
   SCIPinfoMessage(scip, file, "Subject to\n");

   reader = SCIPfindReader(scip, READER_NAME);
   if( reader != NULL )
   {
      readerdata = SCIPreaderGetData(reader);
      assert(readerdata != NULL);

      linearizeands = readerdata->linearizeands;
      aggrlinearizationands = readerdata->aggrlinearizationands;
   }
   else
   {
      linearizeands = DEFAULT_LINEARIZE_ANDS;
      aggrlinearizationands = DEFAULT_AGGRLINEARIZATION_ANDS;
   }

   /* collect SOS, quadratic, and SOC constraints in array for later output */
   SCIP_CALL( SCIPallocBufferArray(scip, &consSOS1, nconss) );
   SCIP_CALL( SCIPallocBufferArray(scip, &consSOS2, nconss) );
   SCIP_CALL( SCIPallocBufferArray(scip, &consExpr, nconss) );
   SCIP_CALL( SCIPallocBufferArray(scip, &consIndicator, nconss) );

   tmpvarssize = SCIPgetNTotalVars(scip);
   SCIP_CALL( SCIPallocBufferArray(scip, &tmpvars, tmpvarssize) );

   for( c = 0; c < nconss; ++c )
   {
      cons = conss[c];
      assert( cons != NULL);

      /* in case the transformed is written only constraints are posted which are enabled in the current node */
      assert(!transformed || SCIPconsIsEnabled(cons));

      /* skip marked constraints in connection with indicator constraints */
      if( conshdlrInd != NULL && SCIPhashmapExists(consHidden, (void*) cons) )
      {
         assert( strcmp(SCIPconshdlrGetName(SCIPconsGetHdlr(cons)), "linear") == 0 );
         continue;
      }

      conshdlr = SCIPconsGetHdlr(cons);
      assert( conshdlr != NULL );

      (void) SCIPsnprintf(consname, LP_MAX_NAMELEN, "%s", SCIPconsGetName(cons));
      conshdlrname = SCIPconshdlrGetName(conshdlr);
      assert( transformed == SCIPconsIsTransformed(cons) );

      if( strcmp(conshdlrname, "linear") == 0 )
      {
         SCIP_CALL( printQuadraticCons(scip, file, consname,
               SCIPgetVarsLinear(scip, cons), SCIPgetValsLinear(scip, cons), SCIPgetNVarsLinear(scip, cons),
               NULL, SCIPgetLhsLinear(scip, cons), SCIPgetRhsLinear(scip, cons), transformed) );
      }
      else if( strcmp(conshdlrname, "setppc") == 0 )
      {
         consvars = SCIPgetVarsSetppc(scip, cons);
         nconsvars = SCIPgetNVarsSetppc(scip, cons);

         switch( SCIPgetTypeSetppc(scip, cons) )
         {
         case SCIP_SETPPCTYPE_PARTITIONING :
            SCIP_CALL( printQuadraticCons(scip, file, consname,
                  consvars, NULL, nconsvars, NULL, 1.0, 1.0, transformed) );
            break;
         case SCIP_SETPPCTYPE_PACKING :
            SCIP_CALL( printQuadraticCons(scip, file, consname,
                  consvars, NULL, nconsvars, NULL, -SCIPinfinity(scip), 1.0, transformed) );
            break;
         case SCIP_SETPPCTYPE_COVERING :
            SCIP_CALL( printQuadraticCons(scip, file, consname,
                  consvars, NULL, nconsvars, NULL, 1.0, SCIPinfinity(scip), transformed) );
            break;
         }
      }
      else if( strcmp(conshdlrname, "logicor") == 0 )
      {
         SCIP_CALL( printQuadraticCons(scip, file, consname,
               SCIPgetVarsLogicor(scip, cons), NULL, SCIPgetNVarsLogicor(scip, cons),
               NULL, 1.0, SCIPinfinity(scip), transformed) );
      }
      else if( strcmp(conshdlrname, "knapsack") == 0 )
      {
         SCIP_Longint* weights;

         consvars = SCIPgetVarsKnapsack(scip, cons);
         nconsvars = SCIPgetNVarsKnapsack(scip, cons);

         /* copy Longint array to SCIP_Real array */
         weights = SCIPgetWeightsKnapsack(scip, cons);
         SCIP_CALL( SCIPallocBufferArray(scip, &consvals, nconsvars) );
         for( v = 0; v < nconsvars; ++v )
            consvals[v] = (SCIP_Real)weights[v];

         SCIP_CALL( printQuadraticCons(scip, file, consname, consvars, consvals, nconsvars,
               NULL, -SCIPinfinity(scip), (SCIP_Real) SCIPgetCapacityKnapsack(scip, cons), transformed) );

         SCIPfreeBufferArray(scip, &consvals);
      }
      else if( strcmp(conshdlrname, "varbound") == 0 )
      {
         SCIP_CALL( SCIPallocBufferArray(scip, &consvars, 2) );
         SCIP_CALL( SCIPallocBufferArray(scip, &consvals, 2) );

         consvars[0] = SCIPgetVarVarbound(scip, cons);
         consvars[1] = SCIPgetVbdvarVarbound(scip, cons);

         consvals[0] = 1.0;
         consvals[1] = SCIPgetVbdcoefVarbound(scip, cons);

         SCIP_CALL( printQuadraticCons(scip, file, consname, consvars, consvals, 2, NULL,
               SCIPgetLhsVarbound(scip, cons), SCIPgetRhsVarbound(scip, cons), transformed) );

         SCIPfreeBufferArray(scip, &consvals);
         SCIPfreeBufferArray(scip, &consvars);
      }
      else if( strcmp(conshdlrname, "SOS1") == 0 )
      {
         /* store constraint */
         consSOS1[nConsSOS1++] = cons;
      }
      else if( strcmp(conshdlrname, "SOS2") == 0 )
      {
         /* store constraint */
         consSOS2[nConsSOS2++] = cons;
      }
      else if( strcmp(conshdlrname, "indicator") == 0 )
      {
         SCIP_CONS* lincons;
         SCIP_VAR* binvar;
         SCIP_VAR* slackvar;
         SCIP_VAR** linvars;
         SCIP_Real* linvals;
         int nlinvars;
         int cnt;
         int rhs;

         assert( conshdlrInd != NULL );

         lincons = SCIPgetLinearConsIndicator(cons);
         binvar = SCIPgetBinaryVarIndicator(cons);
         slackvar = SCIPgetSlackVarIndicator(cons);

         assert( lincons != NULL );
         assert( binvar != NULL );
         assert( slackvar != NULL );

         rhs = 1;
         if ( SCIPvarIsNegated(binvar) )
         {
            rhs = 0;
            binvar = SCIPvarGetNegatedVar(binvar);
         }

         /* collect linear constraint information (remove slack variable) */
         linvars = SCIPgetVarsLinear(scip, lincons);
         linvals = SCIPgetValsLinear(scip, lincons);
         nlinvars = SCIPgetNVarsLinear(scip, lincons);
         assert( linvars != NULL );
         assert( linvals != NULL );

         /* linvars always contains slack variable, thus nlinvars >= 1 */
         if( nlinvars > 1 && !SCIPconsIsDeleted(lincons) )
         {
            (void) SCIPsnprintf(varname, LP_MAX_NAMELEN, "%s", SCIPvarGetName(binvar) );
            if( strlen(consname) > 0 )
               SCIPinfoMessage(scip, file, " %s: %s = %d ->", consname, varname, rhs);
            else
               SCIPinfoMessage(scip, file, " %s = %d ->", varname, rhs);

            SCIP_CALL( SCIPallocBufferArray(scip, &consvars, nlinvars-1) );
            SCIP_CALL( SCIPallocBufferArray(scip, &consvals, nlinvars-1) );

            cnt = 0;
            for( v = 0; v < nlinvars; ++v )
            {
               var = linvars[v];
               if( var != slackvar )
               {
                  consvars[cnt] = var;
                  consvals[cnt++] = linvals[v];
               }
            }
            /* if slackvariable is fixed, it might have been removed from constraint */
            assert( nlinvars == 0 || cnt == nlinvars-1 || SCIPisFeasEQ(scip, SCIPvarGetLbGlobal(slackvar), SCIPvarGetUbGlobal(slackvar)) );

            SCIP_CALL( printQuadraticCons(scip, file, "", consvars, consvals, cnt, NULL,
                  SCIPgetLhsLinear(scip, lincons), SCIPgetRhsLinear(scip, lincons), transformed) );

            SCIPfreeBufferArray(scip, &consvals);
            SCIPfreeBufferArray(scip, &consvars);
         }

         /* store constraint */
         consIndicator[nConsIndicator++] = cons;
      }
      else if( strcmp(conshdlrname, "nonlinear") == 0 )
      {
         SCIP_Bool isquadratic;

         /* check whether there is a quadratic representation of the nonlinear constraint */
         SCIP_CALL( SCIPcheckQuadraticNonlinear(scip, cons, &isquadratic) );

         /* we cannot handle nonlinear constraint that are not quadratically representable */
         if( !isquadratic )
         {
            SCIPwarningMessage(scip, "constraint handler <%s> cannot print constraint\n", SCIPconshdlrGetName(SCIPconsGetHdlr(cons)));
            SCIPinfoMessage(scip, file, "\\ ");
            SCIP_CALL( SCIPprintCons(scip, cons, file) );
            SCIPinfoMessage(scip, file, ";\n");

            return SCIP_OKAY;
         }

         SCIP_CALL( printQuadraticCons(scip, file, consname, NULL, NULL, 0, SCIPgetExprNonlinear(cons),
            SCIPgetLhsNonlinear(cons), SCIPgetRhsNonlinear(cons), transformed) );

         consExpr[nConsExpr++] = cons;
      }
      else if( strcmp(conshdlrname, "and") == 0 )
      {
         if( linearizeands )
         {
            SCIP_CALL( printAndCons(scip, file, consname, cons, aggrlinearizationands, transformed) );
         }
         else
         {
            SCIPwarningMessage(scip, "change parameter \"reading/" READER_NAME "/linearize-and-constraints\" to TRUE to print and-constraints\n");
            SCIPinfoMessage(scip, file, "\\ ");
            SCIP_CALL( SCIPprintCons(scip, cons, file) );
            SCIPinfoMessage(scip, file, ";\n");
         }
      }
      else
      {
         SCIPwarningMessage(scip, "constraint handler <%s> cannot print requested format\n", conshdlrname );
         SCIPinfoMessage(scip, file, "\\ ");
         SCIP_CALL( SCIPprintCons(scip, cons, file) );
         SCIPinfoMessage(scip, file, ";\n");
      }
   }

   /* allocate array for storing aggregated and negated variables (dynamically adjusted) */
   saggvars = MAX(10, nvars);
   SCIP_CALL( SCIPallocBlockMemoryArray(scip, &aggvars, saggvars) );

   /* create hashtable for storing aggregated variables */
   SCIP_CALL( SCIPhashtableCreate(&varAggregated, SCIPblkmem(scip), saggvars, hashGetKeyVar, hashKeyEqVar, hashKeyValVar, NULL) );

   /* check for aggregated variables in SOS1 constraints and output aggregations as linear constraints */
   for( c = 0; c < nConsSOS1; ++c )
   {
      cons = consSOS1[c];
      consvars = SCIPgetVarsSOS1(scip, cons);
      nconsvars = SCIPgetNVarsSOS1(scip, cons);

      SCIP_CALL( collectAggregatedVars(scip, consvars, nconsvars, &aggvars, &naggvars, &saggvars, varAggregated) );
   }

   /* check for aggregated variables in SOS2 constraints and output aggregations as linear constraints */
   for( c = 0; c < nConsSOS2; ++c )
   {
      cons = consSOS2[c];
      consvars = SCIPgetVarsSOS2(scip, cons);
      nconsvars = SCIPgetNVarsSOS2(scip, cons);

      SCIP_CALL( collectAggregatedVars(scip, consvars, nconsvars, &aggvars, &naggvars, &saggvars, varAggregated) );
   }

   /* check for aggregated variables in nonlinear constraints and output aggregations as linear constraints */
   for( c = 0; c < nConsExpr; ++c )
   {
      SCIP_Bool success;
      int ntmpvars;

      /* get variables of the nonlinear constraint */
      SCIP_CALL( SCIPgetConsNVars(scip, consExpr[c], &ntmpvars, &success) );
      assert(success);
      if( ntmpvars > tmpvarssize )
      {
         tmpvarssize = SCIPcalcMemGrowSize(scip, ntmpvars);
         SCIP_CALL( SCIPreallocBufferArray(scip, &tmpvars, tmpvarssize) );
      }
      SCIP_CALL( SCIPgetConsVars(scip, consExpr[c], tmpvars, tmpvarssize, &success) );
      assert(success);

      SCIP_CALL( collectAggregatedVars(scip, tmpvars, ntmpvars, &aggvars, &naggvars, &saggvars, varAggregated) );
   }

   /* check for aggregated variables in indicator constraints and output aggregations as linear constraints */
   for( c = 0; c < nConsIndicator; ++c )
   {
      SCIP_VAR* binvar;

      cons = consIndicator[c];
      binvar = SCIPgetBinaryVarIndicator(cons);
      if ( ! SCIPvarIsNegated(binvar) )
      {
         /* we take care of negated variables above, but not of aggregated variables */
         SCIP_CALL( collectAggregatedVars(scip, &binvar, 1, &aggvars, &naggvars, &saggvars, varAggregated) );
      }
   }

   /* print aggregation constraints */
   SCIP_CALL( printAggregatedCons(scip, file, transformed, nvars, naggvars, aggvars) );

   /* print "Bounds" section */
   SCIPinfoMessage(scip, file, "Bounds\n");
   for( v = 0; v < nvars; ++v )
   {
      var = vars[v];
      assert( var != NULL );
      (void) SCIPsnprintf(varname, LP_MAX_NAMELEN, "%s", SCIPvarGetName(var) );

      if( transformed )
      {
         /* in case the transformed is written only local bounds are posted which are valid in the current node */
         lb = SCIPvarGetLbLocal(var);
         ub = SCIPvarGetUbLocal(var);
      }
      else
      {
         lb = SCIPvarGetLbOriginal(var);
         ub = SCIPvarGetUbOriginal(var);
      }

      if( SCIPisInfinity(scip, -lb) && SCIPisInfinity(scip, ub) )
         SCIPinfoMessage(scip, file, " %s free\n", varname);
      else
      {
         /* print lower bound */
         if( SCIPisInfinity(scip, -lb) )
            SCIPinfoMessage(scip, file, " -inf <= ");
         else
         {
            if( SCIPisZero(scip, lb) )
            {
               /* variables are nonnegative by default - so we skip these variables */
               if( SCIPisInfinity(scip, ub) )
                  continue;
               lb = 0.0;
            }

            SCIPinfoMessage(scip, file, " %.15g <= ", lb);
         }
         /* print variable name */
         SCIPinfoMessage(scip, file, "%s", varname);

         /* print upper bound as far this one is not infinity */
         if( !SCIPisInfinity(scip, ub) )
            SCIPinfoMessage(scip, file, " <= %.15g", ub);

         SCIPinfoMessage(scip, file, "\n");
      }
   }

   /* output aggregated variables as 'free' */
   for( v = 0; v < naggvars; ++v )
   {
      var = aggvars[v];
      assert( var != NULL );
      (void) SCIPsnprintf(varname, LP_MAX_NAMELEN, "%s", SCIPvarGetName(var) );

      SCIPinfoMessage(scip, file, " %s free\n", varname);
   }

   /* print binaries section */
   if( nbinvars > 0 )
   {
      SCIPinfoMessage(scip, file, "Binaries\n");

      clearLine(linebuffer, &linecnt);

      /* output active variables */
      for( v = 0; v < nvars; ++v )
      {
         var = vars[v];
         assert( var != NULL );

         if( SCIPvarGetType(var) == SCIP_VARTYPE_BINARY )
         {
            (void) SCIPsnprintf(varname, LP_MAX_NAMELEN, "%s", SCIPvarGetName(var) );
            (void) SCIPsnprintf(buffer, LP_MAX_PRINTLEN, " %s", varname);
            appendLine(scip, file, linebuffer, &linecnt, buffer);
         }
      }

      /* possibly output aggregated variables */
      for( v = 0; v < naggvars; ++v )
      {
         var = aggvars[v];
         assert( var != NULL );

         if( SCIPvarGetType(var) == SCIP_VARTYPE_BINARY )
         {
            (void) SCIPsnprintf(varname, LP_MAX_NAMELEN, "%s", SCIPvarGetName(var) );
            (void) SCIPsnprintf(buffer, LP_MAX_PRINTLEN, " %s", varname);
            appendLine(scip, file, linebuffer, &linecnt, buffer);
         }
      }

      endLine(scip, file, linebuffer, &linecnt);
   }

   /* print generals section */
   if( nintvars > 0 )
   {
      SCIPinfoMessage(scip, file, "Generals\n");

      /* output active variables */
      for( v = 0; v < nvars; ++v )
      {
         var = vars[v];
         assert( var != NULL );

         if( SCIPvarGetType(var) == SCIP_VARTYPE_INTEGER )
         {
            (void) SCIPsnprintf(varname, LP_MAX_NAMELEN, "%s", SCIPvarGetName(var) );
            (void) SCIPsnprintf(buffer, LP_MAX_PRINTLEN, " %s", varname);
            appendLine(scip, file, linebuffer, &linecnt, buffer);
         }
      }

      /* possibly output aggregated variables */
      for( v = 0; v < naggvars; ++v )
      {
         var = aggvars[v];
         assert( var != NULL );

         if( SCIPvarGetType(var) == SCIP_VARTYPE_INTEGER )
         {
            (void) SCIPsnprintf(varname, LP_MAX_NAMELEN, "%s", SCIPvarGetName(var) );
            (void) SCIPsnprintf(buffer, LP_MAX_PRINTLEN, " %s", varname);
            appendLine(scip, file, linebuffer, &linecnt, buffer);
         }
      }

      endLine(scip, file, linebuffer, &linecnt);
   }

   /* free space */
   SCIPfreeBlockMemoryArray(scip, &aggvars, saggvars);
   SCIPhashtableFree(&varAggregated);
   if( conshdlrInd != NULL )
      SCIPhashmapFree(&consHidden);

   /* print SOS section */
   if( nConsSOS1 > 0 || nConsSOS2 > 0 )
   {
      SCIP_Real* weights;
      SCIPinfoMessage(scip, file, "SOS\n");

      /* first output SOS1 constraints */
      for( c = 0; c < nConsSOS1; ++c )
      {
         cons = consSOS1[c];
         consvars = SCIPgetVarsSOS1(scip, cons);
         nconsvars = SCIPgetNVarsSOS1(scip, cons);
         weights = SCIPgetWeightsSOS1(scip, cons);

         (void) SCIPsnprintf(consname, LP_MAX_NAMELEN, "%s", SCIPconsGetName(cons) );
         printSosCons(scip, file, consname, consvars, weights, nconsvars, 1);
      }

      /* next output SOS2 constraints */
      for( c = 0; c < nConsSOS2; ++c )
      {
         cons = consSOS2[c];
         consvars = SCIPgetVarsSOS2(scip, cons);
         nconsvars = SCIPgetNVarsSOS2(scip, cons);
         weights = SCIPgetWeightsSOS2(scip, cons);

         (void) SCIPsnprintf(consname, LP_MAX_NAMELEN, "%s", SCIPconsGetName(cons) );
         printSosCons(scip, file, consname, consvars, weights, nconsvars, 2);
      }
   }

   /* free space */
   SCIPfreeBufferArray(scip, &tmpvars);
   SCIPfreeBufferArray(scip, &consIndicator);
   SCIPfreeBufferArray(scip, &consExpr);
   SCIPfreeBufferArray(scip, &consSOS2);
   SCIPfreeBufferArray(scip, &consSOS1);

   /* end of lp format */
   SCIPinfoMessage(scip, file, "%s\n", "End");

   *result = SCIP_SUCCESS;

   return SCIP_OKAY;
}