Detailed Description

methods for global SCIP settings

Author: Tobias Achterberg; Timo Berthold

Definition in file set.c.

#include <assert.h>
#include <string.h>
#include <math.h>
#include "scip/def.h"
#include "scip/set.h"
#include "scip/stat.h"
#include "scip/clock.h"
#include "scip/event.h"
#include "scip/lp.h"
#include "scip/paramset.h"
#include "scip/scip.h"
#include "scip/bandit.h"
#include "scip/branch.h"
#include "scip/conflict.h"
#include "scip/cons.h"
#include "scip/disp.h"
#include "scip/dialog.h"
#include "scip/heur.h"
#include "scip/concsolver.h"
#include "scip/compr.h"
#include "scip/nodesel.h"
#include "scip/presol.h"
#include "scip/pricer.h"
#include "scip/reader.h"
#include "scip/relax.h"
#include "scip/sepa.h"
#include "scip/cutsel.h"
#include "scip/table.h"
#include "scip/prop.h"
#include "scip/benders.h"
#include "scip/expr.h"
#include "scip/nlpi.h"
#include "scip/pub_nlpi.h"
#include "scip/struct_scip.h"
#include "scip/struct_paramset.h"

Go to the source code of this file.

Macros
#define	SCIP_DEFAULT_BRANCH_SCOREFUNC 'p'

#define	SCIP_DEFAULT_BRANCH_SCOREFAC 0.167

#define	SCIP_DEFAULT_BRANCH_PREFERBINARY FALSE

#define	SCIP_DEFAULT_BRANCH_CLAMP 0.2

#define	SCIP_DEFAULT_BRANCH_MIDPULL 0.75

#define	SCIP_DEFAULT_BRANCH_MIDPULLRELDOMTRIG 0.5

#define	SCIP_DEFAULT_BRANCH_LPGAINNORMALIZE 's'

#define	SCIP_DEFAULT_BRANCH_DELAYPSCOST TRUE

#define	SCIP_DEFAULT_BRANCH_DIVINGPSCOST TRUE

#define	SCIP_DEFAULT_BRANCH_FORCEALL FALSE

#define	SCIP_DEFAULT_BRANCH_FIRSTSBCHILD 'a'

#define	SCIP_DEFAULT_BRANCH_CHECKSBSOL TRUE

#define	SCIP_DEFAULT_BRANCH_ROUNDSBSOL TRUE

#define	SCIP_DEFAULT_BRANCH_SUMADJUSTSCORE FALSE

#define	SCIP_DEFAULT_COMPR_ENABLE FALSE

#define	SCIP_DEFAULT_CONF_ENABLE TRUE

#define	SCIP_DEFAULT_CONF_MAXVARSFAC 0.15

#define	SCIP_DEFAULT_CONF_MINMAXVARS 0

#define	SCIP_DEFAULT_CONF_MAXLPLOOPS 2

#define	SCIP_DEFAULT_CONF_LPITERATIONS 10

#define	SCIP_DEFAULT_CONF_USEPROP TRUE

#define	SCIP_DEFAULT_CONF_USEINFLP 'b'

#define	SCIP_DEFAULT_CONF_USEBOUNDLP 'b'

#define	SCIP_DEFAULT_CONF_USESB TRUE

#define	SCIP_DEFAULT_CONF_USEPSEUDO TRUE

#define	SCIP_DEFAULT_CONF_PREFINFPROOF TRUE

#define	SCIP_DEFAULT_CONF_SEPARATE TRUE

#define	SCIP_DEFAULT_CONF_DYNAMIC TRUE

#define	SCIP_DEFAULT_CONF_MAXSTORESIZE 10000

#define	SCIP_DEFAULT_CONF_RECONVLEVELS -1

#define	SCIP_DEFAULT_CONF_CLEANBNDDEPEND TRUE

#define	SCIP_DEFAULT_CONF_FUIPLEVELS -1

#define	SCIP_DEFAULT_CONF_INTERCONSS -1

#define	SCIP_DEFAULT_CONF_MAXCONSS 10

#define	SCIP_DEFAULT_CONF_PREFERBINARY FALSE

#define	SCIP_DEFAULT_CONF_ALLOWLOCAL TRUE

#define	SCIP_DEFAULT_CONF_SETTLELOCAL FALSE

#define	SCIP_DEFAULT_CONF_REPROPAGATE TRUE

#define	SCIP_DEFAULT_CONF_KEEPREPROP TRUE

#define	SCIP_DEFAULT_CONF_REMOVEABLE TRUE

#define	SCIP_DEFAULT_CONF_DEPTHSCOREFAC 1.0

#define	SCIP_DEFAULT_CONF_PROOFSCOREFAC 1.0

#define	SCIP_DEFAULT_CONF_UPLOCKSCOREFAC 0.0

#define	SCIP_DEFAULT_CONF_DOWNLOCKSCOREFAC 0.0

#define	SCIP_DEFAULT_CONF_SCOREFAC 0.98

#define	SCIP_DEFAULT_CONF_RESTARTNUM 0

#define	SCIP_DEFAULT_CONF_RESTARTFAC 1.5

#define	SCIP_DEFAULT_CONF_IGNORERELAXEDBD FALSE

#define	SCIP_DEFAULT_CONF_MAXVARSDETECTIMPLIEDBOUNDS 250

#define	SCIP_DEFAULT_CONF_FULLSHORTENCONFLICT TRUE

#define	SCIP_DEFAULT_CONF_CONFLITWEIGHT 0.0

#define	SCIP_DEFAULT_CONF_CONFLITGRAPHWEIGHT 1.0

#define	SCIP_DEFAULT_CONF_WEIGHTSIZE 0.001

#define	SCIP_DEFAULT_CONF_WEIGHTREPROPDEPTH 0.1

#define	SCIP_DEFAULT_CONF_WEIGHTVALIDDEPTH 1.0

#define	SCIP_DEFAULT_CONF_MINIMPROVE 0.05

#define	SCIP_DEFAULT_CONF_SEPAALTPROOFS FALSE

#define	SCIP_DEFAULT_CONF_USELOCALROWS TRUE

#define	SCIP_DEFAULT_CONS_AGELIMIT 0

#define	SCIP_DEFAULT_CONS_OBSOLETEAGE -1

#define	SCIP_DEFAULT_CONS_DISABLEENFOPS FALSE

#define	SCIP_DEFAULT_DISP_VERBLEVEL SCIP_VERBLEVEL_HIGH

#define	SCIP_DEFAULT_DISP_WIDTH 143

#define	SCIP_DEFAULT_DISP_FREQ 100

#define	SCIP_DEFAULT_DISP_HEADERFREQ 15

#define	SCIP_DEFAULT_DISP_LPINFO FALSE

#define	SCIP_DEFAULT_DISP_ALLVIOLS FALSE

#define	SCIP_DEFAULT_DISP_RELEVANTSTATS TRUE

#define	SCIP_DEFAULT_HEUR_USEUCTSUBSCIP FALSE

#define	SCIP_DEFAULT_HISTORY_VALUEBASED FALSE

#define	SCIP_DEFAULT_HISTORY_ALLOWMERGE FALSE

#define	SCIP_DEFAULT_HISTORY_ALLOWTRANSFER FALSE

#define	SCIP_DEFAULT_LIMIT_TIME 1e+20

#define	SCIP_DEFAULT_LIMIT_MEMORY SCIP_MEM_NOLIMIT

#define	SCIP_DEFAULT_LIMIT_GAP 0.0

#define	SCIP_DEFAULT_LIMIT_ABSGAP 0.0

#define	SCIP_DEFAULT_LIMIT_PRIMAL SCIP_INVALID

#define	SCIP_DEFAULT_LIMIT_DUAL SCIP_INVALID

#define	SCIP_DEFAULT_LIMIT_NODES -1LL

#define	SCIP_DEFAULT_LIMIT_STALLNODES -1LL

#define	SCIP_DEFAULT_LIMIT_SOLUTIONS -1

#define	SCIP_DEFAULT_LIMIT_BESTSOL -1

#define	SCIP_DEFAULT_LIMIT_MAXSOL 100

#define	SCIP_DEFAULT_LIMIT_MAXORIGSOL 10

#define	SCIP_DEFAULT_LIMIT_RESTARTS -1

#define	SCIP_DEFAULT_LIMIT_AUTORESTARTNODES -1

#define	SCIP_DEFAULT_LP_SOLVEFREQ 1

#define	SCIP_DEFAULT_LP_ITERLIM -1LL

#define	SCIP_DEFAULT_LP_ROOTITERLIM -1LL

#define	SCIP_DEFAULT_LP_SOLVEDEPTH -1

#define	SCIP_DEFAULT_LP_INITALGORITHM 's'

#define	SCIP_DEFAULT_LP_RESOLVEALGORITHM 's'

#define	SCIP_DEFAULT_LP_PRICING 'l'

#define	SCIP_DEFAULT_LP_CLEARINITIALPROBINGLP TRUE

#define	SCIP_DEFAULT_LP_RESOLVERESTORE FALSE

#define	SCIP_DEFAULT_LP_FREESOLVALBUFFERS FALSE

#define	SCIP_DEFAULT_LP_COLAGELIMIT 10

#define	SCIP_DEFAULT_LP_ROWAGELIMIT 10

#define	SCIP_DEFAULT_LP_CLEANUPCOLS FALSE

#define	SCIP_DEFAULT_LP_CLEANUPCOLSROOT FALSE

#define	SCIP_DEFAULT_LP_CLEANUPROWS TRUE

#define	SCIP_DEFAULT_LP_CLEANUPROWSROOT TRUE

#define	SCIP_DEFAULT_LP_CHECKSTABILITY TRUE

#define	SCIP_DEFAULT_LP_CONDITIONLIMIT -1.0

#define	SCIP_DEFAULT_LP_MARKOWITZ 0.01

#define	SCIP_DEFAULT_LP_CHECKPRIMFEAS TRUE

#define	SCIP_DEFAULT_LP_CHECKDUALFEAS TRUE

#define	SCIP_DEFAULT_LP_CHECKFARKAS TRUE

#define	SCIP_DEFAULT_LP_FASTMIP 1

#define	SCIP_DEFAULT_LP_SCALING 1

#define	SCIP_DEFAULT_LP_PRESOLVING TRUE

#define	SCIP_DEFAULT_LP_LEXDUALALGO FALSE

#define	SCIP_DEFAULT_LP_LEXDUALROOTONLY TRUE

#define	SCIP_DEFAULT_LP_LEXDUALMAXROUNDS 2

#define	SCIP_DEFAULT_LP_LEXDUALBASIC FALSE

#define	SCIP_DEFAULT_LP_LEXDUALSTALLING TRUE

#define	SCIP_DEFAULT_LP_DISABLECUTOFF 2

#define	SCIP_DEFAULT_LP_ROWREPSWITCH 1.2

#define	SCIP_DEFAULT_LP_THREADS 0

#define	SCIP_DEFAULT_LP_RESOLVEITERFAC -1.0

#define	SCIP_DEFAULT_LP_RESOLVEITERMIN 1000

#define	SCIP_DEFAULT_LP_SOLUTIONPOLISHING 3

#define	SCIP_DEFAULT_LP_REFACTORINTERVAL 0

#define	SCIP_DEFAULT_LP_ALWAYSGETDUALS FALSE

#define	SCIP_DEFAULT_NLP_SOLVER ""

#define	SCIP_DEFAULT_NLP_DISABLE FALSE

#define	SCIP_DEFAULT_MEM_SAVEFAC 0.8

#define	SCIP_DEFAULT_MEM_TREEGROWFAC 2.0

#define	SCIP_DEFAULT_MEM_PATHGROWFAC 2.0

#define	SCIP_DEFAULT_MEM_TREEGROWINIT 65536

#define	SCIP_DEFAULT_MEM_PATHGROWINIT 256

#define	SCIP_DEFAULT_MISC_CATCHCTRLC TRUE

#define	SCIP_DEFAULT_MISC_USEVARTABLE TRUE

#define	SCIP_DEFAULT_MISC_USECONSTABLE TRUE

#define	SCIP_DEFAULT_MISC_USESMALLTABLES FALSE

#define	SCIP_DEFAULT_MISC_EXACTSOLVE FALSE

#define	SCIP_DEFAULT_MISC_RESETSTAT TRUE

#define	SCIP_DEFAULT_MISC_IMPROVINGSOLS FALSE

#define	SCIP_DEFAULT_MISC_PRINTREASON TRUE

#define	SCIP_DEFAULT_MISC_ESTIMEXTERNMEM TRUE

#define	SCIP_DEFAULT_MISC_AVOIDMEMOUT TRUE

#define	SCIP_DEFAULT_MISC_TRANSORIGSOLS TRUE

#define	SCIP_DEFAULT_MISC_TRANSSOLSORIG TRUE

#define	SCIP_DEFAULT_MISC_CALCINTEGRAL TRUE

#define	SCIP_DEFAULT_MISC_FINITESOLSTORE FALSE

#define	SCIP_DEFAULT_MISC_OUTPUTORIGSOL TRUE

#define	SCIP_DEFAULT_MISC_ALLOWSTRONGDUALREDS TRUE

#define	SCIP_DEFAULT_MISC_ALLOWWEAKDUALREDS TRUE

#define	SCIP_DEFAULT_MISC_REFERENCEVALUE 1e99

#define	SCIP_DEFAULT_MISC_USESYMMETRY 7

#define	SCIP_DEFAULT_MISC_SCALEOBJ TRUE

#define	SCIP_DEFAULT_MISC_SHOWDIVINGSTATS FALSE

#define	SCIP_DEFAULT_RANDOM_RANDSEEDSHIFT 0

#define	SCIP_DEFAULT_RANDOM_PERMUTATIONSEED 0

#define	SCIP_DEFAULT_RANDOM_LPSEED 0

#define	SCIP_DEFAULT_RANDOM_PERMUTECONSS TRUE

#define	SCIP_DEFAULT_RANDOM_PERMUTEVARS FALSE

#define	SCIP_DEFAULT_NODESEL_CHILDSEL 'h'

#define	SCIP_DEFAULT_PRESOL_ABORTFAC 8e-04

#define	SCIP_DEFAULT_PRESOL_MAXROUNDS -1

#define	SCIP_DEFAULT_PRESOL_MAXRESTARTS -1

#define	SCIP_DEFAULT_PRESOL_CLQTABLEFAC 2.0

#define	SCIP_DEFAULT_PRESOL_RESTARTFAC 0.025

#define	SCIP_DEFAULT_PRESOL_IMMRESTARTFAC 0.10

#define	SCIP_DEFAULT_PRESOL_SUBRESTARTFAC 1.00

#define	SCIP_DEFAULT_PRESOL_RESTARTMINRED 0.10

#define	SCIP_DEFAULT_PRESOL_DONOTMULTAGGR FALSE

#define	SCIP_DEFAULT_PRESOL_DONOTAGGR FALSE

#define	SCIP_DEFAULT_PRICE_ABORTFAC 2.0

#define	SCIP_DEFAULT_PRICE_MAXVARS 100

#define	SCIP_DEFAULT_PRICE_MAXVARSROOT 2000

#define	SCIP_DEFAULT_PRICE_DELVARS FALSE

#define	SCIP_DEFAULT_PRICE_DELVARSROOT FALSE

#define	SCIP_DEFAULT_DECOMP_BENDERSLABELS FALSE

#define	SCIP_DEFAULT_DECOMP_APPLYBENDERS FALSE

#define	SCIP_DEFAULT_DECOMP_MAXGRAPHEDGE 10000

#define	SCIP_DEFAULT_DECOMP_DISABLEMEASURES FALSE

#define	SCIP_DEFAULT_BENDERS_SOLTOL 1e-6

#define	SCIP_DEFAULT_BENDERS_CUTLPSOL TRUE

#define	SCIP_DEFAULT_BENDERS_COPYBENDERS TRUE

#define	SCIP_DEFAULT_REOPT_OBJSIMSOL -1.0

#define	SCIP_DEFAULT_REOPT_OBJSIMROOTLP 0.8

#define	SCIP_DEFAULT_REOPT_OBJSIMDELAY -1.0

#define	SCIP_DEFAULT_REOPT_VARORDERINTERDICTION

#define	SCIP_DEFAULT_REOPT_MAXSAVEDNODES INT_MAX

#define	SCIP_DEFAULT_REOPT_MAXDIFFOFNODES INT_MAX

#define	SCIP_DEFAULT_REOPT_FORCEHEURRESTART 3

#define	SCIP_DEFAULT_REOPT_SAVESOLS INT_MAX

#define	SCIP_DEFAULT_REOPT_SOLVELP 1

#define	SCIP_DEFAULT_REOPT_SOLVELPDIFF 1

#define	SCIP_DEFAULT_REOPT_ENABLE FALSE

#define	SCIP_DEFAULT_REOPT_SEPAGLBINFSUBTREES TRUE

#define	SCIP_DEFAULT_REOPT_SEPABESTSOL FALSE

#define	SCIP_DEFAULT_REOPT_STOREVARHISTOTY FALSE

#define	SCIP_DEFAULT_REOPT_USEPSCOST FALSE

#define	SCIP_DEFAULT_REOPT_COMMONTIMELIMIT FALSE

#define	SCIP_DEFAULT_REOPT_SHRINKINNER TRUE

#define	SCIP_DEFAULT_REOPT_STRONGBRANCHINIT TRUE

#define	SCIP_DEFAULT_REOPT_REDUCETOFRONTIER TRUE

#define	SCIP_DEFAULT_REOPT_SAVECONSPROP FALSE

#define	SCIP_DEFAULT_REOPT_USESPLITCONS TRUE

#define	SCIP_DEFAULT_REOPT_USECUTS FALSE

#define	SCIP_DEFAULT_REOPT_MAXCUTAGE 0

#define	SCIP_DEFAULT_PROP_MAXROUNDS 100

#define	SCIP_DEFAULT_PROP_MAXROUNDSROOT 1000

#define	SCIP_DEFAULT_PROP_ABORTONCUTOFF TRUE

#define	SCIP_DEFAULT_SEPA_MAXBOUNDDIST 1.0

#define	SCIP_DEFAULT_SEPA_MAXLOCALBOUNDDIST 0.0

#define	SCIP_DEFAULT_SEPA_MAXCOEFRATIO 1e+4

#define	SCIP_DEFAULT_SEPA_MAXCOEFRATIOFACROWPREP 10.0

#define	SCIP_DEFAULT_SEPA_MINEFFICACY 1e-4

#define	SCIP_DEFAULT_SEPA_MINEFFICACYROOT 1e-4

#define	SCIP_DEFAULT_SEPA_ORTHOFUNC 'e'

#define	SCIP_DEFAULT_SEPA_EFFICACYNORM 'e'

#define	SCIP_DEFAULT_SEPA_CUTSELRESTART 'a'

#define	SCIP_DEFAULT_SEPA_CUTSELSUBSCIP 'a'

#define	SCIP_DEFAULT_SEPA_FILTERCUTPOOLREL FALSE

#define	SCIP_DEFAULT_SEPA_MAXRUNS -1

#define	SCIP_DEFAULT_SEPA_MAXROUNDS -1

#define	SCIP_DEFAULT_SEPA_MAXROUNDSROOT -1

#define	SCIP_DEFAULT_SEPA_MAXROUNDSROOTSUBRUN -1

#define	SCIP_DEFAULT_SEPA_MAXADDROUNDS 1

#define	SCIP_DEFAULT_SEPA_MAXSTALLROUNDSROOT 10

#define	SCIP_DEFAULT_SEPA_MAXSTALLROUNDS 1

#define	SCIP_DEFAULT_SEPA_MAXCUTSGENFACTOR 2.0

#define	SCIP_DEFAULT_SEPA_MAXCUTSROOTGENFACTOR 2.0

#define	SCIP_DEFAULT_SEPA_MAXCUTS 100

#define	SCIP_DEFAULT_SEPA_MAXCUTSROOT 2000

#define	SCIP_DEFAULT_SEPA_CUTAGELIMIT 80

#define	SCIP_DEFAULT_SEPA_POOLFREQ 10

#define	SCIP_DEFAULT_SEPA_MINACTIVITYQUOT 0.8

#define	SCIP_DEFAULT_PARALLEL_MODE 1

#define	SCIP_DEFAULT_PARALLEL_MINNTHREADS 1

#define	SCIP_DEFAULT_PARALLEL_MAXNTHREADS 8

#define	SCIP_DEFAULT_CONCURRENT_CHANGESEEDS TRUE

#define	SCIP_DEFAULT_CONCURRENT_CHANGECHILDSEL TRUE

#define	SCIP_DEFAULT_CONCURRENT_COMMVARBNDS TRUE

#define	SCIP_DEFAULT_CONCURRENT_PRESOLVEBEFORE TRUE

#define	SCIP_DEFAULT_CONCURRENT_INITSEED 5131912

#define	SCIP_DEFAULT_CONCURRENT_FREQINIT 10.0

#define	SCIP_DEFAULT_CONCURRENT_FREQMAX 10.0

#define	SCIP_DEFAULT_CONCURRENT_FREQFACTOR 1.5

#define	SCIP_DEFAULT_CONCURRENT_TARGETPROGRESS 0.001

#define	SCIP_DEFAULT_CONCURRENT_MAXNSOLS 3

#define	SCIP_DEFAULT_CONCURRENT_MAXNSYNCDELAY 7

#define	SCIP_DEFAULT_CONCURRENT_MINSYNCDELAY 10.0

#define	SCIP_DEFAULT_CONCURRENT_NBESTSOLS 10

#define	SCIP_DEFAULT_CONCURRENT_PARAMSETPREFIX ""

#define	SCIP_DEFAULT_TIME_CLOCKTYPE SCIP_CLOCKTYPE_WALL

#define	SCIP_DEFAULT_TIME_ENABLED TRUE

#define	SCIP_DEFAULT_TIME_READING FALSE

#define	SCIP_DEFAULT_TIME_RARECLOCKCHECK FALSE

#define	SCIP_DEFAULT_TIME_STATISTICTIMING TRUE

#define	SCIP_DEFAULT_TIME_NLPIEVAL FALSE

#define	SCIP_DEFAULT_VISUAL_VBCFILENAME "-"

#define	SCIP_DEFAULT_VISUAL_BAKFILENAME "-"

#define	SCIP_DEFAULT_VISUAL_REALTIME TRUE

#define	SCIP_DEFAULT_VISUAL_DISPSOLS FALSE

#define	SCIP_DEFAULT_VISUAL_DISPLB FALSE

#define	SCIP_DEFAULT_VISUAL_OBJEXTERN TRUE

#define	SCIP_DEFAULT_READ_INITIALCONSS TRUE

#define	SCIP_DEFAULT_READ_DYNAMICCONSS TRUE

#define	SCIP_DEFAULT_READ_DYNAMICCOLS FALSE

#define	SCIP_DEFAULT_READ_DYNAMICROWS FALSE

#define	SCIP_DEFAULT_WRITE_GENNAMES_OFFSET 0

#define	SCIP_DEFAULT_WRITE_ALLCONSS FALSE

#define	SCIP_DEFAULT_PRINTZEROS FALSE

Functions
static int	calcGrowSize (int initsize, SCIP_Real growfac, int num)

static	SCIP_DECL_PARAMCHGD (paramChgdFeastol)

static	SCIP_DECL_PARAMCHGD (paramChgdLPFeastolFactor)

static	SCIP_DECL_PARAMCHGD (paramChgdDualfeastol)

static	SCIP_DECL_PARAMCHGD (paramChgdBarrierconvtol)

static	SCIP_DECL_PARAMCHGD (paramChgdInfinity)

static	SCIP_DECL_PARAMCHGD (SCIPparamChgdDispWidth)

static	SCIP_DECL_PARAMCHGD (SCIPparamChgdLimit)

static	SCIP_DECL_PARAMCHGD (paramChgdArraygrowfac)

static	SCIP_DECL_PARAMCHGD (paramChgdArraygrowinit)

static	SCIP_DECL_PARAMCHGD (paramChgdEnableReopt)

static	SCIP_DECL_PARAMCHGD (paramChgdUsesymmetry)

SCIP_RETCODE	SCIPsetSetReoptimizationParams (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr)

void	SCIPsetEnableOrDisablePluginClocks (SCIP_SET *set, SCIP_Bool enabled)

static	SCIP_DECL_PARAMCHGD (paramChgdStatistictiming)

SCIP_RETCODE	SCIPsetCopyPlugins (SCIP_SET sourceset, SCIP_SET targetset, SCIP_Bool copyreaders, SCIP_Bool copypricers, SCIP_Bool copyconshdlrs, SCIP_Bool copyconflicthdlrs, SCIP_Bool copypresolvers, SCIP_Bool copyrelaxators, SCIP_Bool copyseparators, SCIP_Bool copycutselectors, SCIP_Bool copypropagators, SCIP_Bool copyheuristics, SCIP_Bool copyeventhdlrs, SCIP_Bool copynodeselectors, SCIP_Bool copybranchrules, SCIP_Bool copydisplays, SCIP_Bool copydialogs, SCIP_Bool copytables, SCIP_Bool copyexprhdlrs, SCIP_Bool copynlpis, SCIP_Bool *allvalid)

SCIP_RETCODE	SCIPsetCopyParams (SCIP_SET sourceset, SCIP_SET targetset, SCIP_MESSAGEHDLR *messagehdlr)

SCIP_RETCODE	SCIPsetCreate (SCIP_SET *set, SCIP_MESSAGEHDLR messagehdlr, BMS_BLKMEM blkmem, SCIP scip)

SCIP_RETCODE	SCIPsetFree (SCIP_SET *set, BMS_BLKMEM blkmem)

SCIP_STAGE	SCIPsetGetStage (SCIP_SET *set)

SCIP_RETCODE	SCIPsetAddBoolParam (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, BMS_BLKMEM blkmem, const char name, const char desc, SCIP_Bool valueptr, SCIP_Bool isadvanced, SCIP_Bool defaultvalue, SCIP_DECL_PARAMCHGD((paramchgd)), SCIP_PARAMDATA paramdata)

SCIP_RETCODE	SCIPsetAddIntParam (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, BMS_BLKMEM blkmem, const char name, const char desc, int valueptr, SCIP_Bool isadvanced, int defaultvalue, int minvalue, int maxvalue, SCIP_DECL_PARAMCHGD((paramchgd)), SCIP_PARAMDATA paramdata)

SCIP_RETCODE	SCIPsetAddLongintParam (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, BMS_BLKMEM blkmem, const char name, const char desc, SCIP_Longint valueptr, SCIP_Bool isadvanced, SCIP_Longint defaultvalue, SCIP_Longint minvalue, SCIP_Longint maxvalue, SCIP_DECL_PARAMCHGD((paramchgd)), SCIP_PARAMDATA paramdata)

SCIP_RETCODE	SCIPsetAddRealParam (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, BMS_BLKMEM blkmem, const char name, const char desc, SCIP_Real valueptr, SCIP_Bool isadvanced, SCIP_Real defaultvalue, SCIP_Real minvalue, SCIP_Real maxvalue, SCIP_DECL_PARAMCHGD((paramchgd)), SCIP_PARAMDATA paramdata)

SCIP_RETCODE	SCIPsetAddCharParam (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, BMS_BLKMEM blkmem, const char name, const char desc, char valueptr, SCIP_Bool isadvanced, char defaultvalue, const char allowedvalues, SCIP_DECL_PARAMCHGD((paramchgd)), SCIP_PARAMDATA *paramdata)

SCIP_RETCODE	SCIPsetAddStringParam (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, BMS_BLKMEM blkmem, const char name, const char desc, char valueptr, SCIP_Bool isadvanced, const char defaultvalue, SCIP_DECL_PARAMCHGD((paramchgd)), SCIP_PARAMDATA paramdata)

SCIP_Bool	SCIPsetIsParamFixed (SCIP_SET set, const char name)

SCIP_PARAM *	SCIPsetGetParam (SCIP_SET set, const char name)

SCIP_RETCODE	SCIPsetGetBoolParam (SCIP_SET set, const char name, SCIP_Bool *value)

SCIP_RETCODE	SCIPsetGetIntParam (SCIP_SET set, const char name, int *value)

SCIP_RETCODE	SCIPsetGetLongintParam (SCIP_SET set, const char name, SCIP_Longint *value)

SCIP_RETCODE	SCIPsetGetRealParam (SCIP_SET set, const char name, SCIP_Real *value)

SCIP_RETCODE	SCIPsetGetCharParam (SCIP_SET set, const char name, char *value)

SCIP_RETCODE	SCIPsetGetStringParam (SCIP_SET set, const char name, char **value)

SCIP_RETCODE	SCIPsetChgParamFixed (SCIP_SET set, const char name, SCIP_Bool fixed)

SCIP_RETCODE	SCIPsetChgBoolParam (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, SCIP_PARAM *param, SCIP_Bool value)

SCIP_RETCODE	SCIPsetSetBoolParam (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, const char *name, SCIP_Bool value)

SCIP_RETCODE	SCIPsetSetDefaultBoolParam (SCIP_SET set, const char name, SCIP_Bool defaultvalue)

SCIP_RETCODE	SCIPsetChgIntParam (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, SCIP_PARAM *param, int value)

SCIP_RETCODE	SCIPsetSetIntParam (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, const char *name, int value)

SCIP_RETCODE	SCIPsetSetDefaultIntParam (SCIP_SET set, const char name, int defaultvalue)

SCIP_RETCODE	SCIPsetChgLongintParam (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, SCIP_PARAM *param, SCIP_Longint value)

SCIP_RETCODE	SCIPsetSetLongintParam (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, const char *name, SCIP_Longint value)

SCIP_RETCODE	SCIPsetChgRealParam (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, SCIP_PARAM *param, SCIP_Real value)

SCIP_RETCODE	SCIPsetSetRealParam (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, const char *name, SCIP_Real value)

SCIP_RETCODE	SCIPsetChgCharParam (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, SCIP_PARAM *param, char value)

SCIP_RETCODE	SCIPsetSetCharParam (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, const char *name, char value)

SCIP_RETCODE	SCIPsetChgStringParam (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, SCIP_PARAM param, const char value)

SCIP_RETCODE	SCIPsetSetStringParam (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, const char name, const char value)

SCIP_RETCODE	SCIPsetSetParam (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, const char name, const char value)

SCIP_RETCODE	SCIPsetReadParams (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, const char *filename)

SCIP_RETCODE	SCIPsetWriteParams (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, const char *filename, SCIP_Bool comments, SCIP_Bool onlychanged)

SCIP_RETCODE	SCIPsetResetParam (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, const char *name)

SCIP_RETCODE	SCIPsetResetParams (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr)

SCIP_RETCODE	SCIPsetSetEmphasis (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, SCIP_PARAMEMPHASIS paramemphasis, SCIP_Bool quiet)

SCIP_RETCODE	SCIPsetSetSubscipsOff (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, SCIP_Bool quiet)

SCIP_RETCODE	SCIPsetSetHeuristics (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, SCIP_PARAMSETTING paramsetting, SCIP_Bool quiet)

SCIP_RETCODE	SCIPsetSetPresolving (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, SCIP_PARAMSETTING paramsetting, SCIP_Bool quiet)

SCIP_RETCODE	SCIPsetSetSeparating (SCIP_SET set, SCIP_MESSAGEHDLR messagehdlr, SCIP_PARAMSETTING paramsetting, SCIP_Bool quiet)

SCIP_PARAM **	SCIPsetGetParams (SCIP_SET *set)

int	SCIPsetGetNParams (SCIP_SET *set)

SCIP_RETCODE	SCIPsetIncludeReader (SCIP_SET set, SCIP_READER reader)

SCIP_READER *	SCIPsetFindReader (SCIP_SET set, const char name)

SCIP_RETCODE	SCIPsetIncludePricer (SCIP_SET set, SCIP_PRICER pricer)

SCIP_PRICER *	SCIPsetFindPricer (SCIP_SET set, const char name)

void	SCIPsetSortPricers (SCIP_SET *set)

void	SCIPsetSortPricersName (SCIP_SET *set)

SCIP_RETCODE	SCIPsetIncludeBenders (SCIP_SET set, SCIP_BENDERS benders)

SCIP_BENDERS *	SCIPsetFindBenders (SCIP_SET set, const char name)

void	SCIPsetSortBenders (SCIP_SET *set)

void	SCIPsetSortBendersName (SCIP_SET *set)

SCIP_RETCODE	SCIPsetIncludeConshdlr (SCIP_SET set, SCIP_CONSHDLR conshdlr)

void	SCIPsetReinsertConshdlrSepaPrio (SCIP_SET set, SCIP_CONSHDLR conshdlr, int oldpriority)

SCIP_CONSHDLR *	SCIPsetFindConshdlr (SCIP_SET set, const char name)

SCIP_RETCODE	SCIPsetIncludeConflicthdlr (SCIP_SET set, SCIP_CONFLICTHDLR conflicthdlr)

SCIP_CONFLICTHDLR *	SCIPsetFindConflicthdlr (SCIP_SET set, const char name)

void	SCIPsetSortConflicthdlrs (SCIP_SET *set)

void	SCIPsetSortConflicthdlrsName (SCIP_SET *set)

SCIP_RETCODE	SCIPsetIncludePresol (SCIP_SET set, SCIP_PRESOL presol)

SCIP_PRESOL *	SCIPsetFindPresol (SCIP_SET set, const char name)

void	SCIPsetSortPresols (SCIP_SET *set)

void	SCIPsetSortPresolsName (SCIP_SET *set)

SCIP_RETCODE	SCIPsetIncludeRelax (SCIP_SET set, SCIP_RELAX relax)

SCIP_RELAX *	SCIPsetFindRelax (SCIP_SET set, const char name)

void	SCIPsetSortRelaxs (SCIP_SET *set)

void	SCIPsetSortRelaxsName (SCIP_SET *set)

SCIP_RETCODE	SCIPsetIncludeSepa (SCIP_SET set, SCIP_SEPA sepa)

SCIP_SEPA *	SCIPsetFindSepa (SCIP_SET set, const char name)

void	SCIPsetSortSepas (SCIP_SET *set)

void	SCIPsetSortSepasName (SCIP_SET *set)

SCIP_RETCODE	SCIPsetIncludeCutsel (SCIP_SET set, SCIP_CUTSEL cutsel)

SCIP_CUTSEL *	SCIPsetFindCutsel (SCIP_SET set, const char name)

void	SCIPsetSortCutsels (SCIP_SET *set)

SCIP_RETCODE	SCIPsetIncludeProp (SCIP_SET set, SCIP_PROP prop)

SCIP_PROP *	SCIPsetFindProp (SCIP_SET set, const char name)

void	SCIPsetSortProps (SCIP_SET *set)

void	SCIPsetSortPropsPresol (SCIP_SET *set)

void	SCIPsetSortPropsName (SCIP_SET *set)

SCIP_RETCODE	SCIPsetIncludeBanditvtable (SCIP_SET set, SCIP_BANDITVTABLE banditvtable)

SCIP_BANDITVTABLE *	SCIPsetFindBanditvtable (SCIP_SET set, const char name)

SCIP_RETCODE	SCIPsetIncludeConcsolverType (SCIP_SET set, SCIP_CONCSOLVERTYPE concsolvertype)

SCIP_CONCSOLVERTYPE *	SCIPsetFindConcsolverType (SCIP_SET set, const char name)

SCIP_RETCODE	SCIPsetIncludeConcsolver (SCIP_SET set, SCIP_CONCSOLVER concsolver)

SCIP_RETCODE	SCIPsetFreeConcsolvers (SCIP_SET *set)

SCIP_RETCODE	SCIPsetIncludeHeur (SCIP_SET set, SCIP_HEUR heur)

SCIP_HEUR *	SCIPsetFindHeur (SCIP_SET set, const char name)

void	SCIPsetSortHeurs (SCIP_SET *set)

void	SCIPsetSortHeursName (SCIP_SET *set)

SCIP_RETCODE	SCIPsetIncludeCompr (SCIP_SET set, SCIP_COMPR compr)

SCIP_COMPR *	SCIPsetFindCompr (SCIP_SET set, const char name)

void	SCIPsetSortComprs (SCIP_SET *set)

void	SCIPsetSortComprsName (SCIP_SET *set)

SCIP_RETCODE	SCIPsetIncludeEventhdlr (SCIP_SET set, SCIP_EVENTHDLR eventhdlr)

SCIP_EVENTHDLR *	SCIPsetFindEventhdlr (SCIP_SET set, const char name)

SCIP_RETCODE	SCIPsetIncludeNodesel (SCIP_SET set, SCIP_NODESEL nodesel)

SCIP_NODESEL *	SCIPsetFindNodesel (SCIP_SET set, const char name)

SCIP_NODESEL *	SCIPsetGetNodesel (SCIP_SET set, SCIP_STAT stat)

SCIP_RETCODE	SCIPsetIncludeBranchrule (SCIP_SET set, SCIP_BRANCHRULE branchrule)

SCIP_BRANCHRULE *	SCIPsetFindBranchrule (SCIP_SET set, const char name)

void	SCIPsetSortBranchrules (SCIP_SET *set)

void	SCIPsetSortBranchrulesName (SCIP_SET *set)

SCIP_RETCODE	SCIPsetIncludeDisp (SCIP_SET set, SCIP_DISP disp)

SCIP_DISP *	SCIPsetFindDisp (SCIP_SET set, const char name)

SCIP_RETCODE	SCIPsetIncludeTable (SCIP_SET set, SCIP_TABLE table)

SCIP_TABLE *	SCIPsetFindTable (SCIP_SET set, const char name)

SCIP_RETCODE	SCIPsetIncludeDialog (SCIP_SET set, SCIP_DIALOG dialog)

SCIP_Bool	SCIPsetExistsDialog (SCIP_SET set, SCIP_DIALOG dialog)

SCIP_RETCODE	SCIPsetIncludeExprhdlr (SCIP_SET set, SCIP_EXPRHDLR exprhdlr)

SCIP_EXPRHDLR *	SCIPsetFindExprhdlr (SCIP_SET set, const char name)

void	SCIPsetSortExprhdlrs (SCIP_SET *set)

SCIP_RETCODE	SCIPsetIncludeNlpi (SCIP_SET set, SCIP_NLPI nlpi)

SCIP_NLPI *	SCIPsetFindNlpi (SCIP_SET set, const char name)

void	SCIPsetSortNlpis (SCIP_SET *set)

void	SCIPsetSetPriorityNlpi (SCIP_SET set, SCIP_NLPI nlpi, int priority)

SCIP_RETCODE	SCIPsetIncludeExternalCode (SCIP_SET set, const char name, const char *description)

SCIP_RETCODE	SCIPsetInitPlugins (SCIP_SET set, BMS_BLKMEM blkmem, SCIP_STAT *stat)

SCIP_RETCODE	SCIPsetExitPlugins (SCIP_SET set, BMS_BLKMEM blkmem, SCIP_STAT *stat)

SCIP_RETCODE	SCIPsetInitprePlugins (SCIP_SET set, BMS_BLKMEM blkmem, SCIP_STAT *stat)

SCIP_RETCODE	SCIPsetExitprePlugins (SCIP_SET set, BMS_BLKMEM blkmem, SCIP_STAT *stat)

SCIP_RETCODE	SCIPsetInitsolPlugins (SCIP_SET set, BMS_BLKMEM blkmem, SCIP_STAT *stat)

SCIP_RETCODE	SCIPsetExitsolPlugins (SCIP_SET set, BMS_BLKMEM blkmem, SCIP_STAT *stat, SCIP_Bool restart)

int	SCIPsetCalcMemGrowSize (SCIP_SET *set, int num)

int	SCIPsetCalcTreeGrowSize (SCIP_SET *set, int num)

int	SCIPsetCalcPathGrowSize (SCIP_SET *set, int num)

SCIP_RETCODE	SCIPsetSetVerbLevel (SCIP_SET *set, SCIP_VERBLEVEL verblevel)

SCIP_RETCODE	SCIPsetSetFeastol (SCIP_SET set, SCIP_LP lp, SCIP_Real feastol)

SCIP_RETCODE	SCIPsetSetDualfeastol (SCIP_SET *set, SCIP_Real dualfeastol)

SCIP_RETCODE	SCIPsetSetBarrierconvtol (SCIP_SET *set, SCIP_Real barrierconvtol)

SCIP_Real	SCIPsetSetRelaxfeastol (SCIP_SET *set, SCIP_Real relaxfeastol)

void	SCIPsetSetLimitChanged (SCIP_SET *set)

int	SCIPsetGetPriceMaxvars (SCIP_SET *set, SCIP_Bool root)

SCIP_Real	SCIPsetGetSepaMaxcutsGenFactor (SCIP_SET *set, SCIP_Bool root)

int	SCIPsetGetSepaMaxcuts (SCIP_SET *set, SCIP_Bool root)

SCIP_Real	SCIPsetGetSepaMaxCoefRatioRowprep (SCIP_SET *set)

SCIP_Real	SCIPsetGetReferencevalue (SCIP_SET *set)

SCIP_DEBUGSOLDATA *	SCIPsetGetDebugSolData (SCIP_SET *set)

SCIP_Real	SCIPsetInfinity (SCIP_SET *set)

SCIP_Real	SCIPsetGetHugeValue (SCIP_SET *set)

SCIP_Real	SCIPsetEpsilon (SCIP_SET *set)

SCIP_Real	SCIPsetSumepsilon (SCIP_SET *set)

SCIP_Real	SCIPsetFeastol (SCIP_SET *set)

SCIP_Real	SCIPsetDualfeastol (SCIP_SET *set)

SCIP_Real	SCIPsetLPFeastolFactor (SCIP_SET *set)

SCIP_Real	SCIPsetBarrierconvtol (SCIP_SET *set)

SCIP_Real	SCIPsetPseudocosteps (SCIP_SET *set)

SCIP_Real	SCIPsetPseudocostdelta (SCIP_SET *set)

SCIP_Real	SCIPsetCutoffbounddelta (SCIP_SET *set)

SCIP_Real	SCIPsetRelaxfeastol (SCIP_SET *set)

SCIP_Real	SCIPsetRecompfac (SCIP_SET *set)

SCIP_Bool	SCIPsetIsInfinity (SCIP_SET *set, SCIP_Real val)

SCIP_Bool	SCIPsetIsHugeValue (SCIP_SET *set, SCIP_Real val)

SCIP_Bool	SCIPsetIsEQ (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsLT (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsLE (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsGT (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsGE (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsZero (SCIP_SET *set, SCIP_Real val)

SCIP_Bool	SCIPsetIsPositive (SCIP_SET *set, SCIP_Real val)

SCIP_Bool	SCIPsetIsNegative (SCIP_SET *set, SCIP_Real val)

SCIP_Bool	SCIPsetIsIntegral (SCIP_SET *set, SCIP_Real val)

SCIP_Bool	SCIPsetIsScalingIntegral (SCIP_SET *set, SCIP_Real val, SCIP_Real scalar)

SCIP_Bool	SCIPsetIsFracIntegral (SCIP_SET *set, SCIP_Real val)

SCIP_Real	SCIPsetFloor (SCIP_SET *set, SCIP_Real val)

SCIP_Real	SCIPsetCeil (SCIP_SET *set, SCIP_Real val)

SCIP_Real	SCIPsetRound (SCIP_SET *set, SCIP_Real val)

SCIP_Real	SCIPsetFrac (SCIP_SET *set, SCIP_Real val)

SCIP_Bool	SCIPsetIsSumEQ (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsSumLT (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsSumLE (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsSumGT (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsSumGE (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsSumZero (SCIP_SET *set, SCIP_Real val)

SCIP_Bool	SCIPsetIsSumPositive (SCIP_SET *set, SCIP_Real val)

SCIP_Bool	SCIPsetIsSumNegative (SCIP_SET *set, SCIP_Real val)

SCIP_Real	SCIPsetSumFloor (SCIP_SET *set, SCIP_Real val)

SCIP_Real	SCIPsetSumCeil (SCIP_SET *set, SCIP_Real val)

SCIP_Real	SCIPsetSumRound (SCIP_SET *set, SCIP_Real val)

SCIP_Real	SCIPsetSumFrac (SCIP_SET *set, SCIP_Real val)

SCIP_Bool	SCIPsetIsFeasEQ (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsFeasLT (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsFeasLE (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsFeasGT (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsFeasGE (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsFeasZero (SCIP_SET *set, SCIP_Real val)

SCIP_Bool	SCIPsetIsFeasPositive (SCIP_SET *set, SCIP_Real val)

SCIP_Bool	SCIPsetIsFeasNegative (SCIP_SET *set, SCIP_Real val)

SCIP_Bool	SCIPsetIsFeasIntegral (SCIP_SET *set, SCIP_Real val)

SCIP_Bool	SCIPsetIsFeasFracIntegral (SCIP_SET *set, SCIP_Real val)

SCIP_Real	SCIPsetFeasFloor (SCIP_SET *set, SCIP_Real val)

SCIP_Real	SCIPsetFeasCeil (SCIP_SET *set, SCIP_Real val)

SCIP_Real	SCIPsetFeasRound (SCIP_SET *set, SCIP_Real val)

SCIP_Real	SCIPsetFeasFrac (SCIP_SET *set, SCIP_Real val)

SCIP_Bool	SCIPsetIsDualfeasEQ (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsDualfeasLT (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsDualfeasLE (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsDualfeasGT (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsDualfeasGE (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsDualfeasZero (SCIP_SET *set, SCIP_Real val)

SCIP_Bool	SCIPsetIsDualfeasPositive (SCIP_SET *set, SCIP_Real val)

SCIP_Bool	SCIPsetIsDualfeasNegative (SCIP_SET *set, SCIP_Real val)

SCIP_Bool	SCIPsetIsDualfeasIntegral (SCIP_SET *set, SCIP_Real val)

SCIP_Bool	SCIPsetIsDualfeasFracIntegral (SCIP_SET *set, SCIP_Real val)

SCIP_Real	SCIPsetDualfeasFloor (SCIP_SET *set, SCIP_Real val)

SCIP_Real	SCIPsetDualfeasCeil (SCIP_SET *set, SCIP_Real val)

SCIP_Real	SCIPsetDualfeasRound (SCIP_SET *set, SCIP_Real val)

SCIP_Real	SCIPsetDualfeasFrac (SCIP_SET *set, SCIP_Real val)

SCIP_Bool	SCIPsetIsLbBetter (SCIP_SET *set, SCIP_Real newlb, SCIP_Real oldlb, SCIP_Real oldub)

SCIP_Bool	SCIPsetIsUbBetter (SCIP_SET *set, SCIP_Real newub, SCIP_Real oldlb, SCIP_Real oldub)

SCIP_Bool	SCIPsetIsEfficacious (SCIP_SET *set, SCIP_Bool root, SCIP_Real efficacy)

SCIP_Bool	SCIPsetIsRelEQ (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsRelLT (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsRelLE (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsRelGT (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsRelGE (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsSumRelEQ (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsSumRelLT (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsSumRelLE (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsSumRelGT (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetIsSumRelGE (SCIP_SET *set, SCIP_Real val1, SCIP_Real val2)

SCIP_Bool	SCIPsetGetSubscipsOff (SCIP_SET *set)

SCIP_Bool	SCIPsetIsUpdateUnreliable (SCIP_SET *set, SCIP_Real newvalue, SCIP_Real oldvalue)

void	SCIPsetPrintDebugMessage (SCIP_SET set, const char sourcefile, int sourceline, const char *formatstr,...)

void	SCIPsetDebugMessagePrint (SCIP_SET set, const char formatstr,...)

unsigned int	SCIPsetInitializeRandomSeed (SCIP_SET *set, unsigned int initialseedvalue)

Macro Definition Documentation

◆ SCIP_DEFAULT_BRANCH_SCOREFUNC

#define SCIP_DEFAULT_BRANCH_SCOREFUNC 'p'

branching score function ('s'um, 'p'roduct)

Definition at line 81 of file set.c.

◆ SCIP_DEFAULT_BRANCH_SCOREFAC

#define SCIP_DEFAULT_BRANCH_SCOREFAC 0.167

branching score factor to weigh downward and upward gain prediction in sum score function

Definition at line 83 of file set.c.

◆ SCIP_DEFAULT_BRANCH_PREFERBINARY

#define SCIP_DEFAULT_BRANCH_PREFERBINARY FALSE

should branching on binary variables be preferred?

Definition at line 84 of file set.c.

◆ SCIP_DEFAULT_BRANCH_CLAMP

#define SCIP_DEFAULT_BRANCH_CLAMP 0.2

minimal fractional distance of branching point to a continuous variable' bounds; a value of 0.5 leads to branching always in the middle of a bounded domain

Definition at line 86 of file set.c.

◆ SCIP_DEFAULT_BRANCH_MIDPULL

#define SCIP_DEFAULT_BRANCH_MIDPULL 0.75

fraction by which to move branching point of a continuous variable towards the middle of the domain

Definition at line 87 of file set.c.

◆ SCIP_DEFAULT_BRANCH_MIDPULLRELDOMTRIG

#define SCIP_DEFAULT_BRANCH_MIDPULLRELDOMTRIG 0.5

multiply midpull by relative domain width if the latter is below this value

Definition at line 88 of file set.c.

◆ SCIP_DEFAULT_BRANCH_LPGAINNORMALIZE

#define SCIP_DEFAULT_BRANCH_LPGAINNORMALIZE 's'

strategy for normalizing LP gain when updating pseudo costs of continuous variables

Definition at line 89 of file set.c.

◆ SCIP_DEFAULT_BRANCH_DELAYPSCOST

#define SCIP_DEFAULT_BRANCH_DELAYPSCOST TRUE

should updating pseudo costs of continuous variables be delayed to after separation

Definition at line 90 of file set.c.

◆ SCIP_DEFAULT_BRANCH_DIVINGPSCOST

#define SCIP_DEFAULT_BRANCH_DIVINGPSCOST TRUE

should pseudo costs be updated also in diving and probing mode?

Definition at line 91 of file set.c.

◆ SCIP_DEFAULT_BRANCH_FORCEALL

#define SCIP_DEFAULT_BRANCH_FORCEALL FALSE

should all strong branching children be regarded even if one is detected to be infeasible? (only with propagation)

Definition at line 93 of file set.c.

◆ SCIP_DEFAULT_BRANCH_FIRSTSBCHILD

#define SCIP_DEFAULT_BRANCH_FIRSTSBCHILD 'a'

child node to be regarded first during strong branching (only with propagation): 'u'p child, 'd'own child, 'h'istory-based, or 'a'utomatic

Definition at line 94 of file set.c.

◆ SCIP_DEFAULT_BRANCH_CHECKSBSOL

#define SCIP_DEFAULT_BRANCH_CHECKSBSOL TRUE

should LP solutions during strong branching with propagation be checked for feasibility?

Definition at line 95 of file set.c.

◆ SCIP_DEFAULT_BRANCH_ROUNDSBSOL

#define SCIP_DEFAULT_BRANCH_ROUNDSBSOL TRUE

should LP solutions during strong branching with propagation be rounded? (only when checksbsol=TRUE)

Definition at line 96 of file set.c.

◆ SCIP_DEFAULT_BRANCH_SUMADJUSTSCORE

#define SCIP_DEFAULT_BRANCH_SUMADJUSTSCORE FALSE

score adjustment near zero by adding epsilon (TRUE) or using maximum (FALSE)

Definition at line 97 of file set.c.

◆ SCIP_DEFAULT_COMPR_ENABLE

#define SCIP_DEFAULT_COMPR_ENABLE FALSE

should automatic tree compression in reoptimization after presolving be enabled?

Definition at line 101 of file set.c.

◆ SCIP_DEFAULT_CONF_ENABLE

#define SCIP_DEFAULT_CONF_ENABLE TRUE

conflict analysis be enabled?

Definition at line 106 of file set.c.

◆ SCIP_DEFAULT_CONF_MAXVARSFAC

#define SCIP_DEFAULT_CONF_MAXVARSFAC 0.15

maximal fraction of variables involved in a conflict constraint

Definition at line 107 of file set.c.

◆ SCIP_DEFAULT_CONF_MINMAXVARS

#define SCIP_DEFAULT_CONF_MINMAXVARS 0

minimal absolute maximum of variables involved in a conflict constraint

Definition at line 108 of file set.c.

◆ SCIP_DEFAULT_CONF_MAXLPLOOPS

#define SCIP_DEFAULT_CONF_MAXLPLOOPS 2

maximal number of LP resolving loops during conflict analysis (-1: no limit)

Definition at line 110 of file set.c.

◆ SCIP_DEFAULT_CONF_LPITERATIONS

#define SCIP_DEFAULT_CONF_LPITERATIONS 10

maximal number of LP iterations in each LP resolving loop (-1: no limit)

Definition at line 112 of file set.c.

◆ SCIP_DEFAULT_CONF_USEPROP

#define SCIP_DEFAULT_CONF_USEPROP TRUE

should propagation conflict analysis be used?

Definition at line 113 of file set.c.

◆ SCIP_DEFAULT_CONF_USEINFLP

#define SCIP_DEFAULT_CONF_USEINFLP 'b'

should infeasible LP conflict analysis be used? ('o'ff, 'c'onflict graph, 'd'ual ray, 'b'oth conflict graph and dual ray)

Definition at line 116 of file set.c.

◆ SCIP_DEFAULT_CONF_USEBOUNDLP

#define SCIP_DEFAULT_CONF_USEBOUNDLP 'b'

should bound exceeding LP conflict analysis be used? ('o'ff, 'c'onflict graph, 'd'ual ray, 'b'oth conflict graph and dual solution)

Definition at line 119 of file set.c.

◆ SCIP_DEFAULT_CONF_USESB

#define SCIP_DEFAULT_CONF_USESB TRUE

should infeasible/bound exceeding strong branching conflict analysis be used?

Definition at line 121 of file set.c.

◆ SCIP_DEFAULT_CONF_USEPSEUDO

#define SCIP_DEFAULT_CONF_USEPSEUDO TRUE

should pseudo solution conflict analysis be used?

Definition at line 122 of file set.c.

◆ SCIP_DEFAULT_CONF_PREFINFPROOF

#define SCIP_DEFAULT_CONF_PREFINFPROOF TRUE

prefer infeasibility proof to boundexceeding proof

Definition at line 123 of file set.c.

◆ SCIP_DEFAULT_CONF_SEPARATE

#define SCIP_DEFAULT_CONF_SEPARATE TRUE

should the conflict constraints be separated?

Definition at line 124 of file set.c.

◆ SCIP_DEFAULT_CONF_DYNAMIC

#define SCIP_DEFAULT_CONF_DYNAMIC TRUE

should the conflict constraints be subject to aging?

Definition at line 125 of file set.c.

◆ SCIP_DEFAULT_CONF_MAXSTORESIZE

#define SCIP_DEFAULT_CONF_MAXSTORESIZE 10000

maximal size of the conflict pool

Definition at line 130 of file set.c.

◆ SCIP_DEFAULT_CONF_RECONVLEVELS

#define SCIP_DEFAULT_CONF_RECONVLEVELS -1

number of depth levels up to which UIP reconvergence constraints are generated (-1: generate reconvergence constraints in all depth levels)

Definition at line 132 of file set.c.

◆ SCIP_DEFAULT_CONF_CLEANBNDDEPEND

#define SCIP_DEFAULT_CONF_CLEANBNDDEPEND TRUE

should conflicts based on an old cutoff bound removed?

Definition at line 133 of file set.c.

◆ SCIP_DEFAULT_CONF_FUIPLEVELS

#define SCIP_DEFAULT_CONF_FUIPLEVELS -1

number of depth levels up to which first UIP's are used in conflict analysis (-1: use All-FirstUIP rule)

Definition at line 135 of file set.c.

◆ SCIP_DEFAULT_CONF_INTERCONSS

#define SCIP_DEFAULT_CONF_INTERCONSS -1

maximal number of intermediate conflict constraints generated in conflict graph (-1: use every intermediate constraint)

Definition at line 137 of file set.c.

◆ SCIP_DEFAULT_CONF_MAXCONSS

#define SCIP_DEFAULT_CONF_MAXCONSS 10

maximal number of conflict constraints accepted at an infeasible node (-1: use all generated conflict constraints)

Definition at line 139 of file set.c.

◆ SCIP_DEFAULT_CONF_PREFERBINARY

#define SCIP_DEFAULT_CONF_PREFERBINARY FALSE

should binary conflicts be preferred?

Definition at line 140 of file set.c.

◆ SCIP_DEFAULT_CONF_ALLOWLOCAL

#define SCIP_DEFAULT_CONF_ALLOWLOCAL TRUE

should conflict constraints be generated that are only valid locally?

Definition at line 141 of file set.c.

◆ SCIP_DEFAULT_CONF_SETTLELOCAL

#define SCIP_DEFAULT_CONF_SETTLELOCAL FALSE

should conflict constraints be attached only to the local subtree where they can be useful?

Definition at line 143 of file set.c.

◆ SCIP_DEFAULT_CONF_REPROPAGATE

#define SCIP_DEFAULT_CONF_REPROPAGATE TRUE

should earlier nodes be repropagated in order to replace branching decisions by deductions?

Definition at line 145 of file set.c.

◆ SCIP_DEFAULT_CONF_KEEPREPROP

#define SCIP_DEFAULT_CONF_KEEPREPROP TRUE

should constraints be kept for repropagation even if they are too long?

Definition at line 146 of file set.c.

◆ SCIP_DEFAULT_CONF_REMOVEABLE

#define SCIP_DEFAULT_CONF_REMOVEABLE TRUE

should the conflict's relaxations be subject to LP aging and cleanup?

Definition at line 147 of file set.c.

◆ SCIP_DEFAULT_CONF_DEPTHSCOREFAC

#define SCIP_DEFAULT_CONF_DEPTHSCOREFAC 1.0

score factor for depth level in bound relaxation heuristic of LP analysis

Definition at line 148 of file set.c.

◆ SCIP_DEFAULT_CONF_PROOFSCOREFAC

#define SCIP_DEFAULT_CONF_PROOFSCOREFAC 1.0

score factor for impact on acticity in bound relaxation heuristic of LP analysis

Definition at line 149 of file set.c.

◆ SCIP_DEFAULT_CONF_UPLOCKSCOREFAC

#define SCIP_DEFAULT_CONF_UPLOCKSCOREFAC 0.0

score factor for up locks in bound relaxation heuristic of LP analysis

Definition at line 150 of file set.c.

◆ SCIP_DEFAULT_CONF_DOWNLOCKSCOREFAC

#define SCIP_DEFAULT_CONF_DOWNLOCKSCOREFAC 0.0

score factor for down locks in bound relaxation heuristic of LP analysis

Definition at line 151 of file set.c.

◆ SCIP_DEFAULT_CONF_SCOREFAC

#define SCIP_DEFAULT_CONF_SCOREFAC 0.98

factor to decrease importance of variables' earlier conflict scores

Definition at line 152 of file set.c.

◆ SCIP_DEFAULT_CONF_RESTARTNUM

#define SCIP_DEFAULT_CONF_RESTARTNUM 0

number of successful conflict analysis calls that trigger a restart (0: disable conflict restarts)

Definition at line 154 of file set.c.

◆ SCIP_DEFAULT_CONF_RESTARTFAC

#define SCIP_DEFAULT_CONF_RESTARTFAC 1.5

factor to increase restartnum with after each restart

Definition at line 155 of file set.c.

◆ SCIP_DEFAULT_CONF_IGNORERELAXEDBD

#define SCIP_DEFAULT_CONF_IGNORERELAXEDBD FALSE

should relaxed bounds be ignored?

Definition at line 156 of file set.c.

◆ SCIP_DEFAULT_CONF_MAXVARSDETECTIMPLIEDBOUNDS

#define SCIP_DEFAULT_CONF_MAXVARSDETECTIMPLIEDBOUNDS 250

maximal number of variables to try to detect global bound implications and shorten the whole conflict set (0: disabled)

Definition at line 157 of file set.c.

◆ SCIP_DEFAULT_CONF_FULLSHORTENCONFLICT

#define SCIP_DEFAULT_CONF_FULLSHORTENCONFLICT TRUE

try to shorten the whole conflict set or terminate early (depending on the 'maxvarsdetectimpliedbounds' parameter)

Definition at line 158 of file set.c.

◆ SCIP_DEFAULT_CONF_CONFLITWEIGHT

#define SCIP_DEFAULT_CONF_CONFLITWEIGHT 0.0

the weight the VSIDS score is weight by updating the VSIDS for a variable if it is part of a conflict

Definition at line 159 of file set.c.

◆ SCIP_DEFAULT_CONF_CONFLITGRAPHWEIGHT

#define SCIP_DEFAULT_CONF_CONFLITGRAPHWEIGHT 1.0

the weight the VSIDS score is weight by updating the VSIDS for a variable if it is part of a conflict graph

Definition at line 160 of file set.c.

◆ SCIP_DEFAULT_CONF_WEIGHTSIZE

#define SCIP_DEFAULT_CONF_WEIGHTSIZE 0.001

weight of the size of a conflict used in score calculation

Definition at line 161 of file set.c.

◆ SCIP_DEFAULT_CONF_WEIGHTREPROPDEPTH

#define SCIP_DEFAULT_CONF_WEIGHTREPROPDEPTH 0.1

weight of the repropagation depth of a conflict used in score calculation

Definition at line 162 of file set.c.

◆ SCIP_DEFAULT_CONF_WEIGHTVALIDDEPTH

#define SCIP_DEFAULT_CONF_WEIGHTVALIDDEPTH 1.0

weight of the valid depth of a conflict used in score calculation

Definition at line 163 of file set.c.

◆ SCIP_DEFAULT_CONF_MINIMPROVE

#define SCIP_DEFAULT_CONF_MINIMPROVE 0.05

minimal improvement of primal bound to remove conflicts based on a previous incumbent

Definition at line 164 of file set.c.

◆ SCIP_DEFAULT_CONF_SEPAALTPROOFS

#define SCIP_DEFAULT_CONF_SEPAALTPROOFS FALSE

apply cut generating functions to construct alternative proofs

Definition at line 168 of file set.c.

◆ SCIP_DEFAULT_CONF_USELOCALROWS

#define SCIP_DEFAULT_CONF_USELOCALROWS TRUE

use local rows to construct infeasibility proofs

Definition at line 169 of file set.c.

◆ SCIP_DEFAULT_CONS_AGELIMIT

#define SCIP_DEFAULT_CONS_AGELIMIT 0

maximum age an unnecessary constraint can reach before it is deleted (0: dynamic adjustment, -1: constraints are never deleted)

Definition at line 174 of file set.c.

◆ SCIP_DEFAULT_CONS_OBSOLETEAGE

#define SCIP_DEFAULT_CONS_OBSOLETEAGE -1

age of a constraint after which it is marked obsolete (0: dynamic adjustment, -1: constraints are never marked obsolete)

Definition at line 176 of file set.c.

◆ SCIP_DEFAULT_CONS_DISABLEENFOPS

#define SCIP_DEFAULT_CONS_DISABLEENFOPS FALSE

should enforcement of pseudo solution be disabled?

Definition at line 177 of file set.c.

◆ SCIP_DEFAULT_DISP_VERBLEVEL

#define SCIP_DEFAULT_DISP_VERBLEVEL SCIP_VERBLEVEL_HIGH

verbosity level of output

Definition at line 182 of file set.c.

◆ SCIP_DEFAULT_DISP_WIDTH

#define SCIP_DEFAULT_DISP_WIDTH 143

maximal number of characters in a node information line

Definition at line 183 of file set.c.

◆ SCIP_DEFAULT_DISP_FREQ

#define SCIP_DEFAULT_DISP_FREQ 100

frequency for displaying node information lines

Definition at line 184 of file set.c.

◆ SCIP_DEFAULT_DISP_HEADERFREQ

#define SCIP_DEFAULT_DISP_HEADERFREQ 15

frequency for displaying header lines (every n'th node info line)

Definition at line 185 of file set.c.

◆ SCIP_DEFAULT_DISP_LPINFO

#define SCIP_DEFAULT_DISP_LPINFO FALSE

should the LP solver display status messages?

Definition at line 186 of file set.c.

◆ SCIP_DEFAULT_DISP_ALLVIOLS

#define SCIP_DEFAULT_DISP_ALLVIOLS FALSE

display all violations of the best solution after the solving process finished?

Definition at line 187 of file set.c.

◆ SCIP_DEFAULT_DISP_RELEVANTSTATS

#define SCIP_DEFAULT_DISP_RELEVANTSTATS TRUE

should the relevant statistics be displayed at the end of solving?

Definition at line 188 of file set.c.

◆ SCIP_DEFAULT_HEUR_USEUCTSUBSCIP

#define SCIP_DEFAULT_HEUR_USEUCTSUBSCIP FALSE

should setting of common subscip parameters include the activation of the UCT node selector?

Definition at line 192 of file set.c.

◆ SCIP_DEFAULT_HISTORY_VALUEBASED

#define SCIP_DEFAULT_HISTORY_VALUEBASED FALSE

should statistics be collected for variable domain value pairs

Definition at line 196 of file set.c.

◆ SCIP_DEFAULT_HISTORY_ALLOWMERGE

#define SCIP_DEFAULT_HISTORY_ALLOWMERGE FALSE

should variable histories be merged from sub-SCIPs whenever possible?

Definition at line 197 of file set.c.

◆ SCIP_DEFAULT_HISTORY_ALLOWTRANSFER

#define SCIP_DEFAULT_HISTORY_ALLOWTRANSFER FALSE

should variable histories be transferred to initialize SCIP copies?

Definition at line 198 of file set.c.

◆ SCIP_DEFAULT_LIMIT_TIME

#define SCIP_DEFAULT_LIMIT_TIME 1e+20

maximal time in seconds to run

Definition at line 202 of file set.c.

◆ SCIP_DEFAULT_LIMIT_MEMORY

#define SCIP_DEFAULT_LIMIT_MEMORY SCIP_MEM_NOLIMIT

maximal memory usage in MB

Definition at line 203 of file set.c.

◆ SCIP_DEFAULT_LIMIT_GAP

#define SCIP_DEFAULT_LIMIT_GAP 0.0

solving stops, if the gap is below the given value

Definition at line 204 of file set.c.

◆ SCIP_DEFAULT_LIMIT_ABSGAP

#define SCIP_DEFAULT_LIMIT_ABSGAP 0.0

solving stops, if the absolute difference between primal and dual bound reaches this value

Definition at line 206 of file set.c.

◆ SCIP_DEFAULT_LIMIT_PRIMAL

#define SCIP_DEFAULT_LIMIT_PRIMAL SCIP_INVALID

solving stops, if primal bound is at least as good as given value

Definition at line 207 of file set.c.

◆ SCIP_DEFAULT_LIMIT_DUAL

#define SCIP_DEFAULT_LIMIT_DUAL SCIP_INVALID

solving stops, if dual bound is at least as good as given value

Definition at line 208 of file set.c.

◆ SCIP_DEFAULT_LIMIT_NODES

#define SCIP_DEFAULT_LIMIT_NODES -1LL

maximal number of nodes to process (-1: no limit)

Definition at line 209 of file set.c.

◆ SCIP_DEFAULT_LIMIT_STALLNODES

#define SCIP_DEFAULT_LIMIT_STALLNODES -1LL

solving stops, if the given number of nodes was processed since the last improvement of the primal solution value (-1: no limit)

Definition at line 211 of file set.c.

◆ SCIP_DEFAULT_LIMIT_SOLUTIONS

#define SCIP_DEFAULT_LIMIT_SOLUTIONS -1

solving stops, if given number of sols were found (-1: no limit)

Definition at line 212 of file set.c.

◆ SCIP_DEFAULT_LIMIT_BESTSOL

#define SCIP_DEFAULT_LIMIT_BESTSOL -1

solving stops, if given number of solution improvements were found (-1: no limit)

Definition at line 214 of file set.c.

◆ SCIP_DEFAULT_LIMIT_MAXSOL

#define SCIP_DEFAULT_LIMIT_MAXSOL 100

maximal number of solutions to store in the solution storage

Definition at line 215 of file set.c.

◆ SCIP_DEFAULT_LIMIT_MAXORIGSOL

#define SCIP_DEFAULT_LIMIT_MAXORIGSOL 10

maximal number of solutions candidates to store in the solution storage of the original problem

Definition at line 216 of file set.c.

◆ SCIP_DEFAULT_LIMIT_RESTARTS

#define SCIP_DEFAULT_LIMIT_RESTARTS -1

solving stops, if the given number of restarts was triggered (-1: no limit)

Definition at line 217 of file set.c.

◆ SCIP_DEFAULT_LIMIT_AUTORESTARTNODES

#define SCIP_DEFAULT_LIMIT_AUTORESTARTNODES -1

if solve exceeds this number of nodes, an automatic restart is triggered (-1: no automatic restart)

Definition at line 218 of file set.c.

◆ SCIP_DEFAULT_LP_SOLVEFREQ

#define SCIP_DEFAULT_LP_SOLVEFREQ 1

frequency for solving LP at the nodes; -1: never; 0: only root LP

Definition at line 222 of file set.c.

◆ SCIP_DEFAULT_LP_ITERLIM

#define SCIP_DEFAULT_LP_ITERLIM -1LL

iteration limit for each single LP solve; -1: no limit

Definition at line 223 of file set.c.

◆ SCIP_DEFAULT_LP_ROOTITERLIM

#define SCIP_DEFAULT_LP_ROOTITERLIM -1LL

iteration limit for initial root LP solve; -1: no limit

Definition at line 224 of file set.c.

◆ SCIP_DEFAULT_LP_SOLVEDEPTH

#define SCIP_DEFAULT_LP_SOLVEDEPTH -1

maximal depth for solving LPs (-1: no depth limit)

Definition at line 225 of file set.c.

◆ SCIP_DEFAULT_LP_INITALGORITHM

#define SCIP_DEFAULT_LP_INITALGORITHM 's'

LP algorithm for solving initial LP relaxations ('s'implex, 'b'arrier, barrier with 'c'rossover)

Definition at line 227 of file set.c.

◆ SCIP_DEFAULT_LP_RESOLVEALGORITHM

#define SCIP_DEFAULT_LP_RESOLVEALGORITHM 's'

LP algorithm for resolving LP relaxations if a starting basis exists ('s'implex, 'b'arrier, barrier with 'c'rossover)

Definition at line 229 of file set.c.

◆ SCIP_DEFAULT_LP_PRICING

#define SCIP_DEFAULT_LP_PRICING 'l'

LP pricing strategy ('l'pi default, 'a'uto, 'f'ull pricing, 'p'artial, 's'teepest edge pricing, 'q'uickstart steepest edge pricing, 'd'evex pricing)

Definition at line 232 of file set.c.

◆ SCIP_DEFAULT_LP_CLEARINITIALPROBINGLP

#define SCIP_DEFAULT_LP_CLEARINITIALPROBINGLP TRUE

should lp state be cleared at the end of probing mode when lp was initially unsolved, e.g., when called right after presolving?

Definition at line 234 of file set.c.

◆ SCIP_DEFAULT_LP_RESOLVERESTORE

#define SCIP_DEFAULT_LP_RESOLVERESTORE FALSE

should the LP be resolved to restore the state at start of diving (if FALSE we buffer the solution values)?

Definition at line 235 of file set.c.

◆ SCIP_DEFAULT_LP_FREESOLVALBUFFERS

#define SCIP_DEFAULT_LP_FREESOLVALBUFFERS FALSE

should the buffers for storing LP solution values during diving be freed at end of diving?

Definition at line 236 of file set.c.

◆ SCIP_DEFAULT_LP_COLAGELIMIT

#define SCIP_DEFAULT_LP_COLAGELIMIT 10

maximum age a dynamic column can reach before it is deleted from SCIP_LP (-1: don't delete columns due to aging)

Definition at line 238 of file set.c.

◆ SCIP_DEFAULT_LP_ROWAGELIMIT

#define SCIP_DEFAULT_LP_ROWAGELIMIT 10

maximum age a dynamic row can reach before it is deleted from SCIP_LP (-1: don't delete rows due to aging)

Definition at line 240 of file set.c.

◆ SCIP_DEFAULT_LP_CLEANUPCOLS

#define SCIP_DEFAULT_LP_CLEANUPCOLS FALSE

should new non-basic columns be removed after LP solving?

Definition at line 241 of file set.c.

◆ SCIP_DEFAULT_LP_CLEANUPCOLSROOT

#define SCIP_DEFAULT_LP_CLEANUPCOLSROOT FALSE

should new non-basic columns be removed after root LP solving?

Definition at line 242 of file set.c.

◆ SCIP_DEFAULT_LP_CLEANUPROWS

#define SCIP_DEFAULT_LP_CLEANUPROWS TRUE

should new basic rows be removed after LP solving?

Definition at line 243 of file set.c.

◆ SCIP_DEFAULT_LP_CLEANUPROWSROOT

#define SCIP_DEFAULT_LP_CLEANUPROWSROOT TRUE

should new basic rows be removed after root LP solving?

Definition at line 244 of file set.c.

◆ SCIP_DEFAULT_LP_CHECKSTABILITY

#define SCIP_DEFAULT_LP_CHECKSTABILITY TRUE

should LP solver's return status be checked for stability?

Definition at line 245 of file set.c.

◆ SCIP_DEFAULT_LP_CONDITIONLIMIT

#define SCIP_DEFAULT_LP_CONDITIONLIMIT -1.0

maximum condition number of LP basis counted as stable (-1.0: no limit)

Definition at line 246 of file set.c.

◆ SCIP_DEFAULT_LP_MARKOWITZ

#define SCIP_DEFAULT_LP_MARKOWITZ 0.01

minimal Markowitz threshold to control sparsity/stability in LU factorization

Definition at line 247 of file set.c.

◆ SCIP_DEFAULT_LP_CHECKPRIMFEAS

#define SCIP_DEFAULT_LP_CHECKPRIMFEAS TRUE

should LP solutions be checked for primal feasibility to resolve LP at numerical troubles?

Definition at line 248 of file set.c.

◆ SCIP_DEFAULT_LP_CHECKDUALFEAS

#define SCIP_DEFAULT_LP_CHECKDUALFEAS TRUE

should LP solutions be checked for dual feasibility to resolve LP at numerical troubles?

Definition at line 249 of file set.c.

◆ SCIP_DEFAULT_LP_CHECKFARKAS

#define SCIP_DEFAULT_LP_CHECKFARKAS TRUE

should infeasibility proofs from the LP be checked?

Definition at line 250 of file set.c.

◆ SCIP_DEFAULT_LP_FASTMIP

#define SCIP_DEFAULT_LP_FASTMIP 1

should FASTMIP setting of LP solver be used?

Definition at line 251 of file set.c.

◆ SCIP_DEFAULT_LP_SCALING

#define SCIP_DEFAULT_LP_SCALING 1

LP scaling (0: none, 1: normal, 2: aggressive)

Definition at line 252 of file set.c.

◆ SCIP_DEFAULT_LP_PRESOLVING

#define SCIP_DEFAULT_LP_PRESOLVING TRUE

should presolving of LP solver be used?

Definition at line 253 of file set.c.

◆ SCIP_DEFAULT_LP_LEXDUALALGO

#define SCIP_DEFAULT_LP_LEXDUALALGO FALSE

should the dual lexicographic algorithm be used?

Definition at line 254 of file set.c.

◆ SCIP_DEFAULT_LP_LEXDUALROOTONLY

#define SCIP_DEFAULT_LP_LEXDUALROOTONLY TRUE

should the lexicographic dual algorithm be applied only at the root node

Definition at line 255 of file set.c.

◆ SCIP_DEFAULT_LP_LEXDUALMAXROUNDS

#define SCIP_DEFAULT_LP_LEXDUALMAXROUNDS 2

maximum number of rounds in the dual lexicographic algorithm

Definition at line 256 of file set.c.

◆ SCIP_DEFAULT_LP_LEXDUALBASIC

#define SCIP_DEFAULT_LP_LEXDUALBASIC FALSE

choose fractional basic variables in lexicographic dual algorithm

Definition at line 257 of file set.c.

◆ SCIP_DEFAULT_LP_LEXDUALSTALLING

#define SCIP_DEFAULT_LP_LEXDUALSTALLING TRUE

turn on the lex dual algorithm only when stalling?

Definition at line 258 of file set.c.

◆ SCIP_DEFAULT_LP_DISABLECUTOFF

#define SCIP_DEFAULT_LP_DISABLECUTOFF 2

disable the cutoff bound in the LP solver? (0: enabled, 1: disabled, 2: auto)

Definition at line 259 of file set.c.

◆ SCIP_DEFAULT_LP_ROWREPSWITCH

#define SCIP_DEFAULT_LP_ROWREPSWITCH 1.2

simplex algorithm shall use row representation of the basis if number of rows divided by number of columns exceeds this value

Definition at line 261 of file set.c.

◆ SCIP_DEFAULT_LP_THREADS

#define SCIP_DEFAULT_LP_THREADS 0

number of threads used for solving the LP (0: automatic)

Definition at line 262 of file set.c.

◆ SCIP_DEFAULT_LP_RESOLVEITERFAC

#define SCIP_DEFAULT_LP_RESOLVEITERFAC -1.0

factor of average LP iterations that is used as LP iteration limit for LP resolve (-1.0: unlimited)

Definition at line 264 of file set.c.

◆ SCIP_DEFAULT_LP_RESOLVEITERMIN

#define SCIP_DEFAULT_LP_RESOLVEITERMIN 1000

minimum number of iterations that are allowed for LP resolve

Definition at line 265 of file set.c.

◆ SCIP_DEFAULT_LP_SOLUTIONPOLISHING

#define SCIP_DEFAULT_LP_SOLUTIONPOLISHING 3

LP solution polishing method (0: disabled, 1: only root, 2: always, 3: auto)

Definition at line 266 of file set.c.

◆ SCIP_DEFAULT_LP_REFACTORINTERVAL

#define SCIP_DEFAULT_LP_REFACTORINTERVAL 0

LP refactorization interval (0: automatic)

Definition at line 267 of file set.c.

◆ SCIP_DEFAULT_LP_ALWAYSGETDUALS

#define SCIP_DEFAULT_LP_ALWAYSGETDUALS FALSE

should the dual solution always be collected

Definition at line 268 of file set.c.

◆ SCIP_DEFAULT_NLP_SOLVER

#define SCIP_DEFAULT_NLP_SOLVER ""

name of NLP solver to use, or "" if solver should be chosen by priority

Definition at line 272 of file set.c.

◆ SCIP_DEFAULT_NLP_DISABLE

#define SCIP_DEFAULT_NLP_DISABLE FALSE

should the NLP be always disabled?

Definition at line 273 of file set.c.

◆ SCIP_DEFAULT_MEM_SAVEFAC

#define SCIP_DEFAULT_MEM_SAVEFAC 0.8

fraction of maximal mem usage when switching to memory saving mode

Definition at line 278 of file set.c.

◆ SCIP_DEFAULT_MEM_TREEGROWFAC

#define SCIP_DEFAULT_MEM_TREEGROWFAC 2.0

memory growing factor for tree array

Definition at line 279 of file set.c.

◆ SCIP_DEFAULT_MEM_PATHGROWFAC

#define SCIP_DEFAULT_MEM_PATHGROWFAC 2.0

memory growing factor for path array

Definition at line 280 of file set.c.

◆ SCIP_DEFAULT_MEM_TREEGROWINIT

#define SCIP_DEFAULT_MEM_TREEGROWINIT 65536

initial size of tree array

Definition at line 281 of file set.c.

◆ SCIP_DEFAULT_MEM_PATHGROWINIT

#define SCIP_DEFAULT_MEM_PATHGROWINIT 256

initial size of path array

Definition at line 282 of file set.c.

◆ SCIP_DEFAULT_MISC_CATCHCTRLC

#define SCIP_DEFAULT_MISC_CATCHCTRLC TRUE

should the CTRL-C interrupt be caught by SCIP?

Definition at line 287 of file set.c.

◆ SCIP_DEFAULT_MISC_USEVARTABLE

#define SCIP_DEFAULT_MISC_USEVARTABLE TRUE

should a hashtable be used to map from variable names to variables?

Definition at line 288 of file set.c.

◆ SCIP_DEFAULT_MISC_USECONSTABLE

#define SCIP_DEFAULT_MISC_USECONSTABLE TRUE

should a hashtable be used to map from constraint names to constraints?

Definition at line 289 of file set.c.

◆ SCIP_DEFAULT_MISC_USESMALLTABLES

#define SCIP_DEFAULT_MISC_USESMALLTABLES FALSE

should smaller hashtables be used? yields better performance for small problems with about 100 variables

Definition at line 290 of file set.c.

◆ SCIP_DEFAULT_MISC_EXACTSOLVE

#define SCIP_DEFAULT_MISC_EXACTSOLVE FALSE

should the problem be solved exactly (with proven dual bounds)?

Definition at line 291 of file set.c.

◆ SCIP_DEFAULT_MISC_RESETSTAT

#define SCIP_DEFAULT_MISC_RESETSTAT TRUE

should the statistics be reset if the transformed problem is freed otherwise the statistics get reset after original problem is freed (in case of Benders' decomposition this parameter should be set to FALSE and therefore can be used to collect statistics over all runs)

Definition at line 296 of file set.c.

◆ SCIP_DEFAULT_MISC_IMPROVINGSOLS

#define SCIP_DEFAULT_MISC_IMPROVINGSOLS FALSE

should only solutions be checked which improve the primal bound

Definition at line 297 of file set.c.

◆ SCIP_DEFAULT_MISC_PRINTREASON

#define SCIP_DEFAULT_MISC_PRINTREASON TRUE

should the reason be printed if a given start solution is infeasible?

Definition at line 298 of file set.c.

◆ SCIP_DEFAULT_MISC_ESTIMEXTERNMEM

#define SCIP_DEFAULT_MISC_ESTIMEXTERNMEM TRUE

should the usage of external memory be estimated?

Definition at line 299 of file set.c.

◆ SCIP_DEFAULT_MISC_AVOIDMEMOUT

#define SCIP_DEFAULT_MISC_AVOIDMEMOUT TRUE

try to avoid running into memory limit by restricting plugins like heuristics?

Definition at line 300 of file set.c.

◆ SCIP_DEFAULT_MISC_TRANSORIGSOLS

#define SCIP_DEFAULT_MISC_TRANSORIGSOLS TRUE

should SCIP try to transfer original solutions to the transformed space (after presolving)?

Definition at line 301 of file set.c.

◆ SCIP_DEFAULT_MISC_TRANSSOLSORIG

#define SCIP_DEFAULT_MISC_TRANSSOLSORIG TRUE

should SCIP try to transfer transformed solutions to the original space (after solving)?

Definition at line 302 of file set.c.

◆ SCIP_DEFAULT_MISC_CALCINTEGRAL

#define SCIP_DEFAULT_MISC_CALCINTEGRAL TRUE

should SCIP calculate the primal dual integral?

Definition at line 303 of file set.c.

◆ SCIP_DEFAULT_MISC_FINITESOLSTORE

#define SCIP_DEFAULT_MISC_FINITESOLSTORE FALSE

should SCIP try to remove infinite fixings from solutions copied to the solution store?

Definition at line 304 of file set.c.

◆ SCIP_DEFAULT_MISC_OUTPUTORIGSOL

#define SCIP_DEFAULT_MISC_OUTPUTORIGSOL TRUE

should the best solution be transformed to the orignal space and be output in command line run?

Definition at line 305 of file set.c.

◆ SCIP_DEFAULT_MISC_ALLOWSTRONGDUALREDS

#define SCIP_DEFAULT_MISC_ALLOWSTRONGDUALREDS TRUE

should strong dual reductions be allowed in propagation and presolving?

Definition at line 306 of file set.c.

◆ SCIP_DEFAULT_MISC_ALLOWWEAKDUALREDS

#define SCIP_DEFAULT_MISC_ALLOWWEAKDUALREDS TRUE

should weak dual reductions be allowed in propagation and presolving?

Definition at line 307 of file set.c.

◆ SCIP_DEFAULT_MISC_REFERENCEVALUE

#define SCIP_DEFAULT_MISC_REFERENCEVALUE 1e99

objective value for reference purposes

Definition at line 308 of file set.c.

◆ SCIP_DEFAULT_MISC_USESYMMETRY

#define SCIP_DEFAULT_MISC_USESYMMETRY 7

bitset describing used symmetry handling technique (0: off; 1: polyhedral (orbitopes and/or symresacks) 2: orbital fixing; 3: orbitopes and orbital fixing; 4: Schreier Sims cuts; 5: Schreier Sims cuts and orbitopes); 6: Schreier Sims cuts and orbital fixing; 7: Schreier Sims cuts, orbitopes, and orbital fixing, see type_symmetry.h

Definition at line 312 of file set.c.

◆ SCIP_DEFAULT_MISC_SCALEOBJ

#define SCIP_DEFAULT_MISC_SCALEOBJ TRUE

should the objective function be scaled?

Definition at line 313 of file set.c.

◆ SCIP_DEFAULT_MISC_SHOWDIVINGSTATS

#define SCIP_DEFAULT_MISC_SHOWDIVINGSTATS FALSE

should detailed statistics for diving heuristics be shown?

Definition at line 314 of file set.c.

◆ SCIP_DEFAULT_RANDOM_RANDSEEDSHIFT

#define SCIP_DEFAULT_RANDOM_RANDSEEDSHIFT 0

global shift of all random seeds in the plugins, this will have no impact on the permutation and LP seeds

Definition at line 321 of file set.c.

◆ SCIP_DEFAULT_RANDOM_PERMUTATIONSEED

#define SCIP_DEFAULT_RANDOM_PERMUTATIONSEED 0

seed value for permuting the problem after reading/transformation (0: no permutation)

Definition at line 322 of file set.c.

◆ SCIP_DEFAULT_RANDOM_LPSEED

#define SCIP_DEFAULT_RANDOM_LPSEED 0

random seed for LP solver, e.g. for perturbations in the simplex (0: LP default)

Definition at line 323 of file set.c.

◆ SCIP_DEFAULT_RANDOM_PERMUTECONSS

#define SCIP_DEFAULT_RANDOM_PERMUTECONSS TRUE

should order of constraints be permuted (depends on permutationseed)?

Definition at line 324 of file set.c.

◆ SCIP_DEFAULT_RANDOM_PERMUTEVARS

#define SCIP_DEFAULT_RANDOM_PERMUTEVARS FALSE

should order of variables be permuted (depends on permutationseed)?

Definition at line 325 of file set.c.

◆ SCIP_DEFAULT_NODESEL_CHILDSEL

#define SCIP_DEFAULT_NODESEL_CHILDSEL 'h'

child selection rule ('d'own, 'u'p, 'p'seudo costs, 'i'nference, 'l'p value, 'r'oot LP value difference, 'h'brid inference/root LP value difference)

Definition at line 331 of file set.c.

◆ SCIP_DEFAULT_PRESOL_ABORTFAC

#define SCIP_DEFAULT_PRESOL_ABORTFAC 8e-04

abort presolve, if at most this fraction of the problem was changed in last presolve round

Definition at line 337 of file set.c.

◆ SCIP_DEFAULT_PRESOL_MAXROUNDS

#define SCIP_DEFAULT_PRESOL_MAXROUNDS -1

maximal number of presolving rounds (-1: unlimited, 0: off)

Definition at line 338 of file set.c.

◆ SCIP_DEFAULT_PRESOL_MAXRESTARTS

#define SCIP_DEFAULT_PRESOL_MAXRESTARTS -1

maximal number of restarts (-1: unlimited)

Definition at line 339 of file set.c.

◆ SCIP_DEFAULT_PRESOL_CLQTABLEFAC

#define SCIP_DEFAULT_PRESOL_CLQTABLEFAC 2.0

limit on number of entries in clique table relative to number of problem nonzeros

Definition at line 340 of file set.c.

◆ SCIP_DEFAULT_PRESOL_RESTARTFAC

#define SCIP_DEFAULT_PRESOL_RESTARTFAC 0.025

fraction of integer variables that were fixed in the root node triggering a restart with preprocessing after root node evaluation

Definition at line 342 of file set.c.

◆ SCIP_DEFAULT_PRESOL_IMMRESTARTFAC

#define SCIP_DEFAULT_PRESOL_IMMRESTARTFAC 0.10

fraction of integer variables that were fixed in the root node triggering an immediate restart with preprocessing

Definition at line 344 of file set.c.

◆ SCIP_DEFAULT_PRESOL_SUBRESTARTFAC

#define SCIP_DEFAULT_PRESOL_SUBRESTARTFAC 1.00

fraction of integer variables that were globally fixed during the solving process triggering a restart with preprocessing

Definition at line 346 of file set.c.

◆ SCIP_DEFAULT_PRESOL_RESTARTMINRED

#define SCIP_DEFAULT_PRESOL_RESTARTMINRED 0.10

minimal fraction of integer variables removed after restart to allow for an additional restart

Definition at line 348 of file set.c.

◆ SCIP_DEFAULT_PRESOL_DONOTMULTAGGR

#define SCIP_DEFAULT_PRESOL_DONOTMULTAGGR FALSE

should multi-aggregation of variables be forbidden?

Definition at line 349 of file set.c.

◆ SCIP_DEFAULT_PRESOL_DONOTAGGR

#define SCIP_DEFAULT_PRESOL_DONOTAGGR FALSE

should aggregation of variables be forbidden?

Definition at line 350 of file set.c.

◆ SCIP_DEFAULT_PRICE_ABORTFAC

#define SCIP_DEFAULT_PRICE_ABORTFAC 2.0

pricing is aborted, if fac * price_maxvars pricing candidates were found

Definition at line 356 of file set.c.

◆ SCIP_DEFAULT_PRICE_MAXVARS

#define SCIP_DEFAULT_PRICE_MAXVARS 100

maximal number of variables priced in per pricing round

Definition at line 357 of file set.c.

◆ SCIP_DEFAULT_PRICE_MAXVARSROOT

#define SCIP_DEFAULT_PRICE_MAXVARSROOT 2000

maximal number of priced variables at the root node

Definition at line 358 of file set.c.

◆ SCIP_DEFAULT_PRICE_DELVARS

#define SCIP_DEFAULT_PRICE_DELVARS FALSE

should variables created at the current node be deleted when the node is solved in case they are not present in the LP anymore?

Definition at line 360 of file set.c.

◆ SCIP_DEFAULT_PRICE_DELVARSROOT

#define SCIP_DEFAULT_PRICE_DELVARSROOT FALSE

should variables created at the root node be deleted when the root is solved in case they are not present in the LP anymore?

Definition at line 362 of file set.c.

◆ SCIP_DEFAULT_DECOMP_BENDERSLABELS

#define SCIP_DEFAULT_DECOMP_BENDERSLABELS FALSE

should the variables be labelled for the application of Benders' decomposition

Definition at line 365 of file set.c.

◆ SCIP_DEFAULT_DECOMP_APPLYBENDERS

#define SCIP_DEFAULT_DECOMP_APPLYBENDERS FALSE

if a decomposition exists, should Benders' decomposition be applied?

Definition at line 366 of file set.c.

◆ SCIP_DEFAULT_DECOMP_MAXGRAPHEDGE

#define SCIP_DEFAULT_DECOMP_MAXGRAPHEDGE 10000

maximum number of edges in block graph computation (-1: no limit, 0: disable block graph computation)

Definition at line 367 of file set.c.

◆ SCIP_DEFAULT_DECOMP_DISABLEMEASURES

#define SCIP_DEFAULT_DECOMP_DISABLEMEASURES FALSE

disable expensive measures

Definition at line 368 of file set.c.

◆ SCIP_DEFAULT_BENDERS_SOLTOL

#define SCIP_DEFAULT_BENDERS_SOLTOL 1e-6

the tolerance used to determine optimality in Benders' decomposition

Definition at line 371 of file set.c.

◆ SCIP_DEFAULT_BENDERS_CUTLPSOL

#define SCIP_DEFAULT_BENDERS_CUTLPSOL TRUE

should Benders' cuts be generated from the LP solution?

Definition at line 372 of file set.c.

◆ SCIP_DEFAULT_BENDERS_COPYBENDERS

#define SCIP_DEFAULT_BENDERS_COPYBENDERS TRUE

should Benders' decomposition be copied for sub-SCIPs?

Definition at line 373 of file set.c.

◆ SCIP_DEFAULT_REOPT_OBJSIMSOL

#define SCIP_DEFAULT_REOPT_OBJSIMSOL -1.0

re-use stored solutions only if the similarity of the new and the old objective function is greater or equal than this value

Definition at line 378 of file set.c.

◆ SCIP_DEFAULT_REOPT_OBJSIMROOTLP

#define SCIP_DEFAULT_REOPT_OBJSIMROOTLP 0.8

similarity of two sequential objective function to disable solving the root LP.

Definition at line 379 of file set.c.

◆ SCIP_DEFAULT_REOPT_OBJSIMDELAY

#define SCIP_DEFAULT_REOPT_OBJSIMDELAY -1.0

start reoptimizing the search if the new objective function has similarity of at least SCIP_DEFAULT_REOPT_DELAY w.r.t. the previous objective function.

Definition at line 381 of file set.c.

◆ SCIP_DEFAULT_REOPT_VARORDERINTERDICTION

#define SCIP_DEFAULT_REOPT_VARORDERINTERDICTION

Value:

                                                     'd' /** use 'd'efault, 'r'andom or 'i'nference score for variable
                                                     *  ordering when performing interdiction branching during
                                                     *  reoptimization of nodes
                                                     */

Definition at line 382 of file set.c.

◆ SCIP_DEFAULT_REOPT_MAXSAVEDNODES

#define SCIP_DEFAULT_REOPT_MAXSAVEDNODES INT_MAX

maximum number of saved nodes

Definition at line 383 of file set.c.

◆ SCIP_DEFAULT_REOPT_MAXDIFFOFNODES

#define SCIP_DEFAULT_REOPT_MAXDIFFOFNODES INT_MAX

maximum number of bound changes of two ancestor nodes such that the path get not shrunk

Definition at line 385 of file set.c.

◆ SCIP_DEFAULT_REOPT_FORCEHEURRESTART

#define SCIP_DEFAULT_REOPT_FORCEHEURRESTART 3

force a restart if the last n optimal solutions are found by reoptsols heuristic

Definition at line 388 of file set.c.

◆ SCIP_DEFAULT_REOPT_SAVESOLS

#define SCIP_DEFAULT_REOPT_SAVESOLS INT_MAX

save n best solutions found so far.

Definition at line 389 of file set.c.

◆ SCIP_DEFAULT_REOPT_SOLVELP

#define SCIP_DEFAULT_REOPT_SOLVELP 1

strategy for solving the LP at nodes from reoptimization

Definition at line 390 of file set.c.

◆ SCIP_DEFAULT_REOPT_SOLVELPDIFF

#define SCIP_DEFAULT_REOPT_SOLVELPDIFF 1

difference of path length between two ancestor nodes to solve the LP

Definition at line 391 of file set.c.

◆ SCIP_DEFAULT_REOPT_ENABLE

#define SCIP_DEFAULT_REOPT_ENABLE FALSE

enable reoptimization

Definition at line 392 of file set.c.

◆ SCIP_DEFAULT_REOPT_SEPAGLBINFSUBTREES

#define SCIP_DEFAULT_REOPT_SEPAGLBINFSUBTREES TRUE

save global constraints to separate infeasible subtrees

Definition at line 393 of file set.c.

◆ SCIP_DEFAULT_REOPT_SEPABESTSOL

#define SCIP_DEFAULT_REOPT_SEPABESTSOL FALSE

separate the optimal solution, e.g., for solving constraint shortest path problems

Definition at line 396 of file set.c.

◆ SCIP_DEFAULT_REOPT_STOREVARHISTOTY

#define SCIP_DEFAULT_REOPT_STOREVARHISTOTY FALSE

use the variable history of the previous solve if the objective function has changed only slightly

Definition at line 399 of file set.c.

◆ SCIP_DEFAULT_REOPT_USEPSCOST

#define SCIP_DEFAULT_REOPT_USEPSCOST FALSE

re-use pseudo costs of the objective function changed only slightly

Definition at line 400 of file set.c.

◆ SCIP_DEFAULT_REOPT_COMMONTIMELIMIT

#define SCIP_DEFAULT_REOPT_COMMONTIMELIMIT FALSE

is the given time limit for all reoptimization round?

Definition at line 401 of file set.c.

◆ SCIP_DEFAULT_REOPT_SHRINKINNER

#define SCIP_DEFAULT_REOPT_SHRINKINNER TRUE

replace branched transit nodes by their child nodes, if the number of bound changes is not to large

Definition at line 404 of file set.c.

◆ SCIP_DEFAULT_REOPT_STRONGBRANCHINIT

#define SCIP_DEFAULT_REOPT_STRONGBRANCHINIT TRUE

try to fix variables before reoptimizing by probing like strong branching

Definition at line 407 of file set.c.

◆ SCIP_DEFAULT_REOPT_REDUCETOFRONTIER

#define SCIP_DEFAULT_REOPT_REDUCETOFRONTIER TRUE

delete stored nodes which were not reoptimized

Definition at line 408 of file set.c.

◆ SCIP_DEFAULT_REOPT_SAVECONSPROP

#define SCIP_DEFAULT_REOPT_SAVECONSPROP FALSE

save constraint propagation

Definition at line 409 of file set.c.

◆ SCIP_DEFAULT_REOPT_USESPLITCONS

#define SCIP_DEFAULT_REOPT_USESPLITCONS TRUE

use constraints to reconstruct the subtree pruned be dual reduction when reactivating the node

Definition at line 412 of file set.c.

◆ SCIP_DEFAULT_REOPT_USECUTS

#define SCIP_DEFAULT_REOPT_USECUTS FALSE

reoptimize cuts found at the root node

Definition at line 413 of file set.c.

◆ SCIP_DEFAULT_REOPT_MAXCUTAGE

#define SCIP_DEFAULT_REOPT_MAXCUTAGE 0

maximal age of a cut to be use for reoptimization

Definition at line 414 of file set.c.

◆ SCIP_DEFAULT_PROP_MAXROUNDS

#define SCIP_DEFAULT_PROP_MAXROUNDS 100

maximal number of propagation rounds per node (-1: unlimited)

Definition at line 418 of file set.c.

◆ SCIP_DEFAULT_PROP_MAXROUNDSROOT

#define SCIP_DEFAULT_PROP_MAXROUNDSROOT 1000

maximal number of propagation rounds in root node (-1: unlimited)

Definition at line 419 of file set.c.

◆ SCIP_DEFAULT_PROP_ABORTONCUTOFF

#define SCIP_DEFAULT_PROP_ABORTONCUTOFF TRUE

should propagation be aborted immediately? setting this to FALSE could help conflict analysis to produce more conflict constraints

Definition at line 421 of file set.c.

◆ SCIP_DEFAULT_SEPA_MAXBOUNDDIST

#define SCIP_DEFAULT_SEPA_MAXBOUNDDIST 1.0

maximal relative distance from current node's dual bound to primal bound compared to best node's dual bound for applying separation (0.0: only on current best node, 1.0: on all nodes)

Definition at line 428 of file set.c.

◆ SCIP_DEFAULT_SEPA_MAXLOCALBOUNDDIST

#define SCIP_DEFAULT_SEPA_MAXLOCALBOUNDDIST 0.0

maximal relative distance from current node's dual bound to primal bound compared to best node's dual bound for applying local separation (0.0: only on current best node, 1.0: on all nodes)

Definition at line 431 of file set.c.

◆ SCIP_DEFAULT_SEPA_MAXCOEFRATIO

#define SCIP_DEFAULT_SEPA_MAXCOEFRATIO 1e+4

maximal ratio between coefficients in strongcg, cmir, and flowcover cuts

Definition at line 432 of file set.c.

◆ SCIP_DEFAULT_SEPA_MAXCOEFRATIOFACROWPREP

#define SCIP_DEFAULT_SEPA_MAXCOEFRATIOFACROWPREP 10.0

maximal ratio between coefficients (as factor of 1/feastol) to ensure in rowprep cleanup

Definition at line 433 of file set.c.

◆ SCIP_DEFAULT_SEPA_MINEFFICACY

#define SCIP_DEFAULT_SEPA_MINEFFICACY 1e-4

minimal efficacy for a cut to enter the LP

Definition at line 434 of file set.c.

◆ SCIP_DEFAULT_SEPA_MINEFFICACYROOT

#define SCIP_DEFAULT_SEPA_MINEFFICACYROOT 1e-4

minimal efficacy for a cut to enter the LP in the root node

Definition at line 435 of file set.c.

◆ SCIP_DEFAULT_SEPA_ORTHOFUNC

#define SCIP_DEFAULT_SEPA_ORTHOFUNC 'e'

function used for calc. scalar prod. in orthogonality test ('e'uclidean, 'd'iscrete)

Definition at line 436 of file set.c.

◆ SCIP_DEFAULT_SEPA_EFFICACYNORM

#define SCIP_DEFAULT_SEPA_EFFICACYNORM 'e'

row norm to use for efficacy calculation ('e'uclidean, 'm'aximum, 's'um, 'd'iscrete)

Definition at line 438 of file set.c.

◆ SCIP_DEFAULT_SEPA_CUTSELRESTART

#define SCIP_DEFAULT_SEPA_CUTSELRESTART 'a'

cut selection during restart ('a'ge, activity 'q'uotient)

Definition at line 439 of file set.c.

◆ SCIP_DEFAULT_SEPA_CUTSELSUBSCIP

#define SCIP_DEFAULT_SEPA_CUTSELSUBSCIP 'a'

cut selection for sub SCIPs ('a'ge, activity 'q'uotient)

Definition at line 440 of file set.c.

◆ SCIP_DEFAULT_SEPA_FILTERCUTPOOLREL

#define SCIP_DEFAULT_SEPA_FILTERCUTPOOLREL FALSE

should cutpool separate only cuts with high relative efficacy?

Definition at line 441 of file set.c.

◆ SCIP_DEFAULT_SEPA_MAXRUNS

#define SCIP_DEFAULT_SEPA_MAXRUNS -1

maximal number of runs for which separation is enabled (-1: unlimited)

Definition at line 442 of file set.c.

◆ SCIP_DEFAULT_SEPA_MAXROUNDS

#define SCIP_DEFAULT_SEPA_MAXROUNDS -1

maximal number of separation rounds per node (-1: unlimited)

Definition at line 443 of file set.c.

◆ SCIP_DEFAULT_SEPA_MAXROUNDSROOT

#define SCIP_DEFAULT_SEPA_MAXROUNDSROOT -1

maximal number of separation rounds in the root node (-1: unlimited)

Definition at line 444 of file set.c.

◆ SCIP_DEFAULT_SEPA_MAXROUNDSROOTSUBRUN

#define SCIP_DEFAULT_SEPA_MAXROUNDSROOTSUBRUN -1

maximal number of separation rounds in the root node of a subsequent run (-1: unlimited)

Definition at line 445 of file set.c.

◆ SCIP_DEFAULT_SEPA_MAXADDROUNDS

#define SCIP_DEFAULT_SEPA_MAXADDROUNDS 1

maximal additional number of separation rounds in subsequent price-and-cut loops (-1: no additional restriction)

Definition at line 447 of file set.c.

◆ SCIP_DEFAULT_SEPA_MAXSTALLROUNDSROOT

#define SCIP_DEFAULT_SEPA_MAXSTALLROUNDSROOT 10

maximal number of consecutive separation rounds without objective or integrality improvement in the root node (-1: no additional restriction)

Definition at line 449 of file set.c.

◆ SCIP_DEFAULT_SEPA_MAXSTALLROUNDS

#define SCIP_DEFAULT_SEPA_MAXSTALLROUNDS 1

maximal number of consecutive separation rounds without objective or integrality improvement in local nodes (-1: no additional restriction)

Definition at line 451 of file set.c.

◆ SCIP_DEFAULT_SEPA_MAXCUTSGENFACTOR

#define SCIP_DEFAULT_SEPA_MAXCUTSGENFACTOR 2.0

factor w.r.t. maxcuts for maximal number of cuts generated per separation round

Definition at line 452 of file set.c.

◆ SCIP_DEFAULT_SEPA_MAXCUTSROOTGENFACTOR

#define SCIP_DEFAULT_SEPA_MAXCUTSROOTGENFACTOR 2.0

factor w.r.t. maxcutsroot for maximal generated cuts at the root node

Definition at line 453 of file set.c.

◆ SCIP_DEFAULT_SEPA_MAXCUTS

#define SCIP_DEFAULT_SEPA_MAXCUTS 100

maximal number of cuts separated per separation round

Definition at line 454 of file set.c.

◆ SCIP_DEFAULT_SEPA_MAXCUTSROOT

#define SCIP_DEFAULT_SEPA_MAXCUTSROOT 2000

maximal separated cuts per separation round at the root node

Definition at line 455 of file set.c.

◆ SCIP_DEFAULT_SEPA_CUTAGELIMIT

#define SCIP_DEFAULT_SEPA_CUTAGELIMIT 80

maximum age a cut can reach before it is deleted from global cut pool (-1: cuts are never deleted from the global cut pool)

Definition at line 457 of file set.c.

◆ SCIP_DEFAULT_SEPA_POOLFREQ

#define SCIP_DEFAULT_SEPA_POOLFREQ 10

separation frequency for the global cut pool

Definition at line 458 of file set.c.

◆ SCIP_DEFAULT_SEPA_MINACTIVITYQUOT

#define SCIP_DEFAULT_SEPA_MINACTIVITYQUOT 0.8

minimum cut activity quotient to convert cuts into constraints during a restart (0.0: all cuts are converted)

Definition at line 460 of file set.c.

◆ SCIP_DEFAULT_PARALLEL_MODE

#define SCIP_DEFAULT_PARALLEL_MODE 1

the mode for the parallel implementation. Either 0: opportunistic or 1: deterministic

Definition at line 464 of file set.c.

◆ SCIP_DEFAULT_PARALLEL_MINNTHREADS

#define SCIP_DEFAULT_PARALLEL_MINNTHREADS 1

the minimum number of threads used in parallel code

Definition at line 465 of file set.c.

◆ SCIP_DEFAULT_PARALLEL_MAXNTHREADS

#define SCIP_DEFAULT_PARALLEL_MAXNTHREADS 8

the maximum number of threads used in parallel code

Definition at line 466 of file set.c.

◆ SCIP_DEFAULT_CONCURRENT_CHANGESEEDS

#define SCIP_DEFAULT_CONCURRENT_CHANGESEEDS TRUE

should the concurrent solvers use different random seeds?

Definition at line 469 of file set.c.

◆ SCIP_DEFAULT_CONCURRENT_CHANGECHILDSEL

#define SCIP_DEFAULT_CONCURRENT_CHANGECHILDSEL TRUE

should the concurrent solvers use different child selection rules?

Definition at line 470 of file set.c.

◆ SCIP_DEFAULT_CONCURRENT_COMMVARBNDS

#define SCIP_DEFAULT_CONCURRENT_COMMVARBNDS TRUE

should the concurrent solvers communicate variable bounds?

Definition at line 471 of file set.c.

◆ SCIP_DEFAULT_CONCURRENT_PRESOLVEBEFORE

#define SCIP_DEFAULT_CONCURRENT_PRESOLVEBEFORE TRUE

should the problem be presolved before it is copied to the concurrent solvers?

Definition at line 472 of file set.c.

◆ SCIP_DEFAULT_CONCURRENT_INITSEED

#define SCIP_DEFAULT_CONCURRENT_INITSEED 5131912

the seed used to initialize the random seeds for the concurrent solvers

Definition at line 473 of file set.c.

◆ SCIP_DEFAULT_CONCURRENT_FREQINIT

#define SCIP_DEFAULT_CONCURRENT_FREQINIT 10.0

initial frequency of synchronization with other threads (fraction of time required for solving the root LP)

Definition at line 475 of file set.c.

◆ SCIP_DEFAULT_CONCURRENT_FREQMAX

#define SCIP_DEFAULT_CONCURRENT_FREQMAX 10.0

maximal frequency of synchronization with other threads (fraction of time required for solving the root LP)

Definition at line 477 of file set.c.

◆ SCIP_DEFAULT_CONCURRENT_FREQFACTOR

#define SCIP_DEFAULT_CONCURRENT_FREQFACTOR 1.5

factor by which the frequency of synchronization is changed

Definition at line 478 of file set.c.

◆ SCIP_DEFAULT_CONCURRENT_TARGETPROGRESS

#define SCIP_DEFAULT_CONCURRENT_TARGETPROGRESS 0.001

when adapting the synchronization frequency this value is the targeted relative difference by which the absolute gap decreases per synchronization

Definition at line 480 of file set.c.

◆ SCIP_DEFAULT_CONCURRENT_MAXNSOLS

#define SCIP_DEFAULT_CONCURRENT_MAXNSOLS 3

maximum number of solutions that will be shared in a single synchronization

Definition at line 481 of file set.c.

◆ SCIP_DEFAULT_CONCURRENT_MAXNSYNCDELAY

#define SCIP_DEFAULT_CONCURRENT_MAXNSYNCDELAY 7

maximum number of synchronizations before reading is enforced regardless of delay

Definition at line 482 of file set.c.

◆ SCIP_DEFAULT_CONCURRENT_MINSYNCDELAY

#define SCIP_DEFAULT_CONCURRENT_MINSYNCDELAY 10.0

minimum delay before synchronization data is read

Definition at line 483 of file set.c.

◆ SCIP_DEFAULT_CONCURRENT_NBESTSOLS

#define SCIP_DEFAULT_CONCURRENT_NBESTSOLS 10

how many of the N best solutions should be considered for synchronization

Definition at line 484 of file set.c.

◆ SCIP_DEFAULT_CONCURRENT_PARAMSETPREFIX

#define SCIP_DEFAULT_CONCURRENT_PARAMSETPREFIX ""

path prefix for parameter setting files of concurrent solvers

Definition at line 485 of file set.c.

◆ SCIP_DEFAULT_TIME_CLOCKTYPE

#define SCIP_DEFAULT_TIME_CLOCKTYPE SCIP_CLOCKTYPE_WALL

default clock type for timing

Definition at line 490 of file set.c.

◆ SCIP_DEFAULT_TIME_ENABLED

#define SCIP_DEFAULT_TIME_ENABLED TRUE

is timing enabled?

Definition at line 491 of file set.c.

◆ SCIP_DEFAULT_TIME_READING

#define SCIP_DEFAULT_TIME_READING FALSE

belongs reading time to solving time?

Definition at line 492 of file set.c.

◆ SCIP_DEFAULT_TIME_RARECLOCKCHECK

#define SCIP_DEFAULT_TIME_RARECLOCKCHECK FALSE

should clock checks of solving time be performed less frequently (might exceed time limit slightly)

Definition at line 493 of file set.c.

◆ SCIP_DEFAULT_TIME_STATISTICTIMING

#define SCIP_DEFAULT_TIME_STATISTICTIMING TRUE

should timing for statistic output be enabled?

Definition at line 494 of file set.c.

◆ SCIP_DEFAULT_TIME_NLPIEVAL

#define SCIP_DEFAULT_TIME_NLPIEVAL FALSE

should time for evaluation in NLP solves be measured?

Definition at line 495 of file set.c.

◆ SCIP_DEFAULT_VISUAL_VBCFILENAME

#define SCIP_DEFAULT_VISUAL_VBCFILENAME "-"

name of the VBC tool output file, or "-" if no VBC tool output should be created

Definition at line 500 of file set.c.

◆ SCIP_DEFAULT_VISUAL_BAKFILENAME

#define SCIP_DEFAULT_VISUAL_BAKFILENAME "-"

name of the BAK tool output file, or "-" if no BAK tool output should be created

Definition at line 501 of file set.c.

◆ SCIP_DEFAULT_VISUAL_REALTIME

#define SCIP_DEFAULT_VISUAL_REALTIME TRUE

should the real solving time be used instead of a time step counter in visualization?

Definition at line 502 of file set.c.

◆ SCIP_DEFAULT_VISUAL_DISPSOLS

#define SCIP_DEFAULT_VISUAL_DISPSOLS FALSE

should the node where solutions are found be visualized?

Definition at line 503 of file set.c.

◆ SCIP_DEFAULT_VISUAL_DISPLB

#define SCIP_DEFAULT_VISUAL_DISPLB FALSE

should lower bound information be visualized?

Definition at line 504 of file set.c.

◆ SCIP_DEFAULT_VISUAL_OBJEXTERN

#define SCIP_DEFAULT_VISUAL_OBJEXTERN TRUE

should be output the external value of the objective?

Definition at line 505 of file set.c.

◆ SCIP_DEFAULT_READ_INITIALCONSS

#define SCIP_DEFAULT_READ_INITIALCONSS TRUE

should model constraints be marked as initial?

Definition at line 510 of file set.c.

◆ SCIP_DEFAULT_READ_DYNAMICCONSS

#define SCIP_DEFAULT_READ_DYNAMICCONSS TRUE

should model constraints be subject to aging?

Definition at line 511 of file set.c.

◆ SCIP_DEFAULT_READ_DYNAMICCOLS

#define SCIP_DEFAULT_READ_DYNAMICCOLS FALSE

should columns be added and removed dynamically to the LP?

Definition at line 512 of file set.c.

◆ SCIP_DEFAULT_READ_DYNAMICROWS

#define SCIP_DEFAULT_READ_DYNAMICROWS FALSE

should rows be added and removed dynamically to the LP?

Definition at line 513 of file set.c.

◆ SCIP_DEFAULT_WRITE_GENNAMES_OFFSET

#define SCIP_DEFAULT_WRITE_GENNAMES_OFFSET 0

when writing the problem with generic names, we start with index 0; using this parameter we can change the starting index to be different

Definition at line 516 of file set.c.

◆ SCIP_DEFAULT_WRITE_ALLCONSS

#define SCIP_DEFAULT_WRITE_ALLCONSS FALSE

should all constraints be written (including the redundant constraints)?

Definition at line 521 of file set.c.

◆ SCIP_DEFAULT_PRINTZEROS

#define SCIP_DEFAULT_PRINTZEROS FALSE

should variables set to zero be printed?

Definition at line 522 of file set.c.

Function Documentation

◆ calcGrowSize()

static int calcGrowSize	(	int	initsize,
		SCIP_Real	growfac,
		int	num
	)

static

calculate memory size for dynamically allocated arrays

Parameters

initsize	initial size of array
growfac	growing factor of array
num	minimum number of entries to store

Definition at line 528 of file set.c.

References MAX.

◆ SCIP_DECL_PARAMCHGD() [1/12]

static SCIP_DECL_PARAMCHGD ( paramChgdFeastol )

static

information method for a parameter change of feastol

Definition at line 572 of file set.c.

References SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIPchgFeastol(), and SCIPparamGetReal().

◆ SCIP_DECL_PARAMCHGD() [2/12]

static SCIP_DECL_PARAMCHGD ( paramChgdLPFeastolFactor )

static

information method for a parameter change of lpfeastolfactor

Definition at line 586 of file set.c.

References SCIP_OKAY, SCIP_Real, SCIP_STAGE_SOLVING, SCIPfeastol(), SCIPgetLPFeastol(), SCIPgetStage(), SCIPparamGetReal(), and SCIPresetLPFeastol().

◆ SCIP_DECL_PARAMCHGD() [3/12]

static SCIP_DECL_PARAMCHGD ( paramChgdDualfeastol )

static

information method for a parameter change of dualfeastol

Definition at line 605 of file set.c.

References SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIPchgDualfeastol(), and SCIPparamGetReal().

◆ SCIP_DECL_PARAMCHGD() [4/12]

static SCIP_DECL_PARAMCHGD ( paramChgdBarrierconvtol )

static

information method for a parameter change of barrierconvtol

Definition at line 619 of file set.c.

References SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIPchgBarrierconvtol(), and SCIPparamGetReal().

◆ SCIP_DECL_PARAMCHGD() [5/12]

static SCIP_DECL_PARAMCHGD ( paramChgdInfinity )

static

information method for a parameter change of infinity value

Definition at line 633 of file set.c.

References infinity, NULL, SCIP_OKAY, SCIP_PARAMETERWRONGVAL, SCIP_Real, SCIPerrorMessage, SCIPlpiInfinity(), and SCIPparamGetReal().

◆ SCIP_DECL_PARAMCHGD() [6/12]

static SCIP_DECL_PARAMCHGD ( SCIPparamChgdDispWidth )

static

parameter change information method to autoselect display columns again

Definition at line 652 of file set.c.

References SCIP_CALL, SCIP_OKAY, and SCIPautoselectDisps().

◆ SCIP_DECL_PARAMCHGD() [7/12]

static SCIP_DECL_PARAMCHGD ( SCIPparamChgdLimit )

static

parameter change information method that some limit was changed

Definition at line 662 of file set.c.

References SCIP_OKAY, and SCIPmarkLimitChanged().

◆ SCIP_DECL_PARAMCHGD() [8/12]

static SCIP_DECL_PARAMCHGD ( paramChgdArraygrowfac )

static

information method for a parameter change of mem_arraygrowfac

Definition at line 670 of file set.c.

References BMSsetBufferMemoryArraygrowfac(), SCIP_OKAY, SCIP_Real, SCIPbuffer(), SCIPcleanbuffer(), and SCIPparamGetReal().

◆ SCIP_DECL_PARAMCHGD() [9/12]

static SCIP_DECL_PARAMCHGD ( paramChgdArraygrowinit )

static

information method for a parameter change of mem_arraygrowinit

Definition at line 685 of file set.c.

References BMSsetBufferMemoryArraygrowinit(), SCIP_OKAY, SCIPbuffer(), SCIPcleanbuffer(), and SCIPparamGetInt().

◆ SCIP_DECL_PARAMCHGD() [10/12]

static SCIP_DECL_PARAMCHGD ( paramChgdEnableReopt )

static

information method for a parameter change of reopt_enable

Definition at line 700 of file set.c.

References NULL, SCIP_INVALIDCALL, SCIP_OKAY, SCIP_PARAMETERWRONGVAL, SCIPenableReoptimization(), and SCIPparamGetBool().

◆ SCIP_DECL_PARAMCHGD() [11/12]

static SCIP_DECL_PARAMCHGD ( paramChgdUsesymmetry )

static

information method for a parameter change of usesymmetry

Definition at line 719 of file set.c.

References NULL, SCIP_OKAY, SCIP_PARAMETERWRONGVAL, SCIP_STAGE_INITPRESOLVE, SCIP_STAGE_SOLVED, SCIPerrorMessage, SCIPgetStage(), and SCIPparamGetInt().

◆ SCIPsetSetReoptimizationParams()

SCIP_RETCODE SCIPsetSetReoptimizationParams	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr
	)

set parameters for reoptimization

Parameters

set	SCIP data structure
messagehdlr	message handler

Definition at line 737 of file set.c.

Referenced by SCIPenableReoptimization(), and SCIPparamsetCopyParams().

◆ SCIPsetEnableOrDisablePluginClocks()

void SCIPsetEnableOrDisablePluginClocks	(	SCIP_SET *	set,
		SCIP_Bool	enabled
	)

enable or disable all plugin timers depending on the value of the flag enabled

Parameters

set	SCIP settings
enabled	should plugin clocks be enabled?

Definition at line 795 of file set.c.

Referenced by SCIPenableOrDisableStatisticTiming().

◆ SCIP_DECL_PARAMCHGD() [12/12]

static SCIP_DECL_PARAMCHGD ( paramChgdStatistictiming )

static

Definition at line 847 of file set.c.

References SCIP_CALL, SCIP_OKAY, and SCIPenableOrDisableStatisticTiming().

◆ SCIPsetCopyPlugins()

SCIP_RETCODE SCIPsetCopyPlugins	(	SCIP_SET *	sourceset,
		SCIP_SET *	targetset,
		SCIP_Bool	copyreaders,
		SCIP_Bool	copypricers,
		SCIP_Bool	copyconshdlrs,
		SCIP_Bool	copyconflicthdlrs,
		SCIP_Bool	copypresolvers,
		SCIP_Bool	copyrelaxators,
		SCIP_Bool	copyseparators,
		SCIP_Bool	copycutselectors,
		SCIP_Bool	copypropagators,
		SCIP_Bool	copyheuristics,
		SCIP_Bool	copyeventhdlrs,
		SCIP_Bool	copynodeselectors,
		SCIP_Bool	copybranchrules,
		SCIP_Bool	copydisplays,
		SCIP_Bool	copydialogs,
		SCIP_Bool	copytables,
		SCIP_Bool	copyexprhdlrs,
		SCIP_Bool	copynlpis,
		SCIP_Bool *	allvalid
	)

copies plugins from sourcescip to targetscip; in case that a constraint handler which does not need constraints cannot be copied, valid will return FALSE. All plugins can declare that, if their copy process failed, the copied SCIP instance might not represent the same problem semantics as the original. Note that in this case dual reductions might be invalid.

Parameters

sourceset	source SCIP_SET data structure
targetset	target SCIP_SET data structure
copyreaders	should the file readers be copied
copypricers	should the variable pricers be copied
copyconshdlrs	should the constraint handlers be copied
copyconflicthdlrs	should the conflict handlers be copied
copypresolvers	should the presolvers be copied
copyrelaxators	should the relaxators be copied
copyseparators	should the separators be copied
copycutselectors	should the cut selectors be copied
copypropagators	should the propagators be copied
copyheuristics	should the heuristics be copied
copyeventhdlrs	should the event handlers be copied
copynodeselectors	should the node selectors be copied
copybranchrules	should the branchrules be copied
copydisplays	should the display columns be copied
copydialogs	should the dialogs be copied
copytables	should the statistics tables be copied
copyexprhdlrs	should the expression handlers be copied
copynlpis	should the NLP interfaces be copied
allvalid	pointer to store whether all plugins were validly copied

Definition at line 858 of file set.c.

References SCIP_Set::branchrules, SCIP_Set::conflicthdlrs, SCIP_Set::conshdlrs_include, SCIP_Set::cutsels, SCIP_Set::dialogs, SCIP_Set::disps, SCIP_Set::eventhdlrs, SCIP_Set::exprhdlrs, FALSE, SCIP_Set::heurs, SCIP_Set::nbranchrules, SCIP_Set::nconflicthdlrs, SCIP_Set::nconshdlrs, SCIP_Set::ncutsels, SCIP_Set::ndialogs, SCIP_Set::ndisps, SCIP_Set::neventhdlrs, SCIP_Set::nexprhdlrs, SCIP_Set::nheurs, SCIP_Set::nlpis, SCIP_Set::nnlpis, SCIP_Set::nnodesels, SCIP_Set::nodesels, SCIP_Set::npresols, SCIP_Set::npricers, SCIP_Set::nprops, SCIP_Set::nreaders, SCIP_Set::nrelaxs, SCIP_Set::nsepas, SCIP_Set::ntables, NULL, SCIP_Set::presols, SCIP_Set::pricers, SCIP_Set::props, SCIP_Set::readers, SCIP_Set::relaxs, SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIPbranchruleCopyInclude(), SCIPconflicthdlrCopyInclude(), SCIPconshdlrCopyInclude(), SCIPconshdlrGetName(), SCIPconshdlrIsClonable(), SCIPconshdlrNeedsCons(), SCIPcutselCopyInclude(), SCIPdialogCopyInclude(), SCIPdispCopyInclude(), SCIPeventhdlrCopyInclude(), SCIPexprhdlrCopyInclude(), SCIPheurCopyInclude(), SCIPnlpiCopyInclude(), SCIPnodeselCopyInclude(), SCIPpresolCopyInclude(), SCIPpricerActivate(), SCIPpricerCopyInclude(), SCIPpricerIsActive(), SCIPpropCopyInclude(), SCIPreaderCopyInclude(), SCIPrelaxCopyInclude(), SCIPsepaCopyInclude(), SCIPsetDebugMsg, SCIPtableCopyInclude(), SCIP_Set::sepas, SCIP_Set::tables, and TRUE.

Referenced by SCIPcopyPlugins().

◆ SCIPsetCopyParams()

SCIP_RETCODE SCIPsetCopyParams	(	SCIP_SET *	sourceset,
		SCIP_SET *	targetset,
		SCIP_MESSAGEHDLR *	messagehdlr
	)

copies parameters from sourcescip to targetscip

Parameters

sourceset	source SCIP_SET data structure
targetset	target SCIP_SET data structure
messagehdlr	message handler of target SCIP

Definition at line 1084 of file set.c.

References NULL, SCIP_Set::paramset, SCIP_Set::scip, SCIP_CALL, SCIP_OKAY, and SCIPparamsetCopyParams().

Referenced by SCIPcopyParamSettings().

◆ SCIPsetCreate()

SCIP_RETCODE SCIPsetCreate	(	SCIP_SET **	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		BMS_BLKMEM *	blkmem,
		SCIP *	scip
	)

creates global SCIP settings

Parameters

set	pointer to SCIP settings
messagehdlr	message handler
blkmem	block memory
scip	SCIP data structure

Definition at line 1101 of file set.c.

Referenced by doScipCreate().

◆ SCIPsetFree()

SCIP_RETCODE SCIPsetFree	(	SCIP_SET **	set,
		BMS_BLKMEM *	blkmem
	)

frees global SCIP settings

Parameters

set	pointer to SCIP settings
blkmem	block memory

Definition at line 2757 of file set.c.

Referenced by SCIPfree().

◆ SCIPsetGetStage()

SCIP_STAGE SCIPsetGetStage ( SCIP_SET * set )

returns current stage of SCIP

Parameters

set	global SCIP settings

Definition at line 2952 of file set.c.

Referenced by applyImplic(), generateBendersCuts(), primalAddSol(), SCIPcliquetableCleanup(), SCIPconflictstoreAddConflict(), SCIPconflictstoreTransform(), SCIPconsSetEnforced(), SCIPconsSetPropagated(), SCIPconsSetSeparated(), SCIPprimalAddOrigObjoffset(), SCIPprimalUpdateObjoffset(), SCIPprobAddVar(), SCIPprobPerformVarDeletions(), SCIPvarAddVlb(), SCIPvarAddVub(), SCIPvarChgLbGlobal(), SCIPvarChgLbLocal(), SCIPvarChgLbOriginal(), SCIPvarChgType(), SCIPvarChgUbGlobal(), SCIPvarChgUbLocal(), SCIPvarChgUbOriginal(), SCIPvarFixBinary(), SCIPvarTryAggregateVars(), tryAggregateIntVars(), varAddImplic(), varProcessChgLbGlobal(), varProcessChgLbLocal(), varProcessChgUbGlobal(), and varProcessChgUbLocal().

◆ SCIPsetAddBoolParam()

SCIP_RETCODE SCIPsetAddBoolParam	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		BMS_BLKMEM *	blkmem,
		const char *	name,
		const char *	desc,
		SCIP_Bool *	valueptr,
		SCIP_Bool	isadvanced,
		SCIP_Bool	defaultvalue,
		SCIP_DECL_PARAMCHGD((*paramchgd))	,
		SCIP_PARAMDATA *	paramdata
	)

creates a SCIP_Bool parameter, sets it to its default value, and adds it to the parameter set

Parameters

set	global SCIP settings
messagehdlr	message handler
blkmem	block memory
name	name of the parameter
desc	description of the parameter
valueptr	pointer to store the current parameter value, or NULL
isadvanced	is this parameter an advanced parameter?
defaultvalue	default value of the parameter
paramdata	locally defined parameter specific data

Definition at line 2962 of file set.c.

Referenced by doBendersCreate(), doBenderscutCreate(), doConshdlrCreate(), doPropCreate(), doSepaCreate(), doTableCreate(), SCIPaddBoolParam(), and SCIPdivesetCreate().

◆ SCIPsetAddIntParam()

SCIP_RETCODE SCIPsetAddIntParam	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		BMS_BLKMEM *	blkmem,
		const char *	name,
		const char *	desc,
		int *	valueptr,
		SCIP_Bool	isadvanced,
		int	defaultvalue,
		int	minvalue,
		int	maxvalue,
		SCIP_DECL_PARAMCHGD((*paramchgd))	,
		SCIP_PARAMDATA *	paramdata
	)

creates an int parameter, sets it to its default value, and adds it to the parameter set

Parameters

set	global SCIP settings
messagehdlr	message handler
blkmem	block memory
name	name of the parameter
desc	description of the parameter
valueptr	pointer to store the current parameter value, or NULL
isadvanced	is this parameter an advanced parameter?
defaultvalue	default value of the parameter
minvalue	minimum value for parameter
maxvalue	maximum value for parameter
paramdata	locally defined parameter specific data

Definition at line 2984 of file set.c.

Referenced by doBendersCreate(), doBenderscutCreate(), doBranchruleCreate(), doComprCreate(), doConflicthdlrCreate(), doConshdlrCreate(), doCutselCreate(), doDispCreate(), doHeurCreate(), doNodeselCreate(), doPresolCreate(), doPricerCreate(), doPropCreate(), doRelaxCreate(), doSepaCreate(), SCIPaddIntParam(), and SCIPdivesetCreate().

◆ SCIPsetAddLongintParam()

SCIP_RETCODE SCIPsetAddLongintParam	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		BMS_BLKMEM *	blkmem,
		const char *	name,
		const char *	desc,
		SCIP_Longint *	valueptr,
		SCIP_Bool	isadvanced,
		SCIP_Longint	defaultvalue,
		SCIP_Longint	minvalue,
		SCIP_Longint	maxvalue,
		SCIP_DECL_PARAMCHGD((*paramchgd))	,
		SCIP_PARAMDATA *	paramdata
	)

creates a SCIP_Longint parameter, sets it to its default value, and adds it to the parameter set

Parameters

set	global SCIP settings
messagehdlr	message handler
blkmem	block memory
name	name of the parameter
desc	description of the parameter
valueptr	pointer to store the current parameter value, or NULL
isadvanced	is this parameter an advanced parameter?
defaultvalue	default value of the parameter
minvalue	minimum value for parameter
maxvalue	maximum value for parameter
paramdata	locally defined parameter specific data

Definition at line 3008 of file set.c.

Referenced by SCIPaddLongintParam().

◆ SCIPsetAddRealParam()

SCIP_RETCODE SCIPsetAddRealParam	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		BMS_BLKMEM *	blkmem,
		const char *	name,
		const char *	desc,
		SCIP_Real *	valueptr,
		SCIP_Bool	isadvanced,
		SCIP_Real	defaultvalue,
		SCIP_Real	minvalue,
		SCIP_Real	maxvalue,
		SCIP_DECL_PARAMCHGD((*paramchgd))	,
		SCIP_PARAMDATA *	paramdata
	)

creates a SCIP_Real parameter, sets it to its default value, and adds it to the parameter set

Parameters

set	global SCIP settings
messagehdlr	message handler
blkmem	block memory
name	name of the parameter
desc	description of the parameter
valueptr	pointer to store the current parameter value, or NULL
isadvanced	is this parameter an advanced parameter?
defaultvalue	default value of the parameter
minvalue	minimum value for parameter
maxvalue	maximum value for parameter
paramdata	locally defined parameter specific data

Definition at line 3032 of file set.c.

Referenced by doBendersCreate(), doBranchruleCreate(), doConcsolverTypeCreate(), doSepaCreate(), SCIPaddRealParam(), and SCIPdivesetCreate().

◆ SCIPsetAddCharParam()

SCIP_RETCODE SCIPsetAddCharParam	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		BMS_BLKMEM *	blkmem,
		const char *	name,
		const char *	desc,
		char *	valueptr,
		SCIP_Bool	isadvanced,
		char	defaultvalue,
		const char *	allowedvalues,
		SCIP_DECL_PARAMCHGD((*paramchgd))	,
		SCIP_PARAMDATA *	paramdata
	)

creates a char parameter, sets it to its default value, and adds it to the parameter set

Parameters

set	global SCIP settings
messagehdlr	message handler
blkmem	block memory
name	name of the parameter
desc	description of the parameter
valueptr	pointer to store the current parameter value, or NULL
isadvanced	is this parameter an advanced parameter?
defaultvalue	default value of the parameter
allowedvalues	array with possible parameter values, or NULL if not restricted
paramdata	locally defined parameter specific data

Definition at line 3056 of file set.c.

Referenced by doBendersCreate(), and SCIPaddCharParam().

◆ SCIPsetAddStringParam()

SCIP_RETCODE SCIPsetAddStringParam	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		BMS_BLKMEM *	blkmem,
		const char *	name,
		const char *	desc,
		char **	valueptr,
		SCIP_Bool	isadvanced,
		const char *	defaultvalue,
		SCIP_DECL_PARAMCHGD((*paramchgd))	,
		SCIP_PARAMDATA *	paramdata
	)

creates a string parameter, sets it to its default value, and adds it to the parameter set

Parameters

set	global SCIP settings
messagehdlr	message handler
blkmem	block memory
name	name of the parameter
desc	description of the parameter
valueptr	pointer to store the current parameter value, or NULL
isadvanced	is this parameter an advanced parameter?
defaultvalue	default value of the parameter
paramdata	locally defined parameter specific data

Definition at line 3079 of file set.c.

Referenced by SCIPaddStringParam().

◆ SCIPsetIsParamFixed()

SCIP_Bool SCIPsetIsParamFixed	(	SCIP_SET *	set,
		const char *	name
	)

gets the fixing status value of an existing parameter

Parameters

set	global SCIP settings
name	name of the parameter

Definition at line 3101 of file set.c.

Referenced by SCIPisParamFixed(), and SCIPparamsetCopyParams().

◆ SCIPsetGetParam()

SCIP_PARAM * SCIPsetGetParam	(	SCIP_SET *	set,
		const char *	name
	)

returns the pointer to the SCIP parameter with the given name

Parameters

set	global SCIP settings
name	name of the parameter

Definition at line 3112 of file set.c.

Referenced by SCIPgetParam().

◆ SCIPsetGetBoolParam()

SCIP_RETCODE SCIPsetGetBoolParam	(	SCIP_SET *	set,
		const char *	name,
		SCIP_Bool *	value
	)

gets the value of an existing SCIP_Bool parameter

Parameters

set	global SCIP settings
name	name of the parameter
value	pointer to store the parameter

Definition at line 3123 of file set.c.

Referenced by SCIPgetBoolParam().

◆ SCIPsetGetIntParam()

SCIP_RETCODE SCIPsetGetIntParam	(	SCIP_SET *	set,
		const char *	name,
		int *	value
	)

gets the value of an existing Int parameter

Parameters

set	global SCIP settings
name	name of the parameter
value	pointer to store the value of the parameter

Definition at line 3137 of file set.c.

Referenced by initConflictstore(), SCIPgetIntParam(), SCIPreoptAddDualBndchg(), and solveBendersSubproblems().

◆ SCIPsetGetLongintParam()

SCIP_RETCODE SCIPsetGetLongintParam	(	SCIP_SET *	set,
		const char *	name,
		SCIP_Longint *	value
	)

gets the value of an existing SCIP_Longint parameter

Parameters

set	global SCIP settings
name	name of the parameter
value	pointer to store the value of the parameter

Definition at line 3151 of file set.c.

Referenced by SCIPgetLongintParam().

◆ SCIPsetGetRealParam()

SCIP_RETCODE SCIPsetGetRealParam	(	SCIP_SET *	set,
		const char *	name,
		SCIP_Real *	value
	)

gets the value of an existing SCIP_Real parameter

Parameters

set	global SCIP settings
name	name of the parameter
value	pointer to store the value of the parameter

Definition at line 3165 of file set.c.

Referenced by SCIPbendersInit(), and SCIPgetRealParam().

◆ SCIPsetGetCharParam()

SCIP_RETCODE SCIPsetGetCharParam	(	SCIP_SET *	set,
		const char *	name,
		char *	value
	)

gets the value of an existing Char parameter

Parameters

set	global SCIP settings
name	name of the parameter
value	pointer to store the value of the parameter

Definition at line 3179 of file set.c.

Referenced by SCIPgetCharParam(), and SCIPlpSolveAndEval().

◆ SCIPsetGetStringParam()

SCIP_RETCODE SCIPsetGetStringParam	(	SCIP_SET *	set,
		const char *	name,
		char **	value
	)

gets the value of an existing String parameter

Parameters

set	global SCIP settings
name	name of the parameter
value	pointer to store the value of the parameter

Definition at line 3193 of file set.c.

Referenced by SCIPgetStringParam().

◆ SCIPsetChgParamFixed()

SCIP_RETCODE SCIPsetChgParamFixed	(	SCIP_SET *	set,
		const char *	name,
		SCIP_Bool	fixed
	)

changes the fixing status of an existing parameter

Parameters

set	global SCIP settings
name	name of the parameter
fixed	new fixing status of the parameter

Definition at line 3207 of file set.c.

Referenced by SCIPfixParam(), SCIPparamsetCopyParams(), and SCIPunfixParam().

◆ SCIPsetChgBoolParam()

SCIP_RETCODE SCIPsetChgBoolParam	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		SCIP_PARAM *	param,
		SCIP_Bool	value
	)

changes the value of an existing SCIP_Bool parameter

Parameters

set	global SCIP settings
messagehdlr	message handler
param	parameter
value	new value of the parameter

Definition at line 3221 of file set.c.

Referenced by SCIPchgBoolParam().

◆ SCIPsetSetBoolParam()

SCIP_RETCODE SCIPsetSetBoolParam	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		const char *	name,
		SCIP_Bool	value
	)

changes the value of an existing SCIP_Bool parameter

Parameters

set	global SCIP settings
messagehdlr	message handler
name	name of the parameter
value	new value of the parameter

Definition at line 3243 of file set.c.

Referenced by SCIPsetBoolParam().

◆ SCIPsetSetDefaultBoolParam()

SCIP_RETCODE SCIPsetSetDefaultBoolParam	(	SCIP_SET *	set,
		const char *	name,
		SCIP_Bool	defaultvalue
	)

sets the default value of an existing SCIP_Bool parameter

Parameters

set	global SCIP settings
name	name of the parameter
defaultvalue	new default value of the parameter

Definition at line 3258 of file set.c.

Referenced by SCIPsetConshdlrProp(), and SCIPsetConshdlrSepa().

◆ SCIPsetChgIntParam()

SCIP_RETCODE SCIPsetChgIntParam	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		SCIP_PARAM *	param,
		int	value
	)

changes the value of an existing Int parameter

Parameters

set	global SCIP settings
messagehdlr	message handler
param	parameter
value	new value of the parameter

Definition at line 3273 of file set.c.

References FALSE, NULL, SCIP_CALL, SCIP_PARAMETERWRONGVAL, SCIPparamSetInt(), and TRUE.

Referenced by SCIPchgIntParam().

◆ SCIPsetSetIntParam()

SCIP_RETCODE SCIPsetSetIntParam	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		const char *	name,
		int	value
	)

changes the value of an existing Int parameter

Parameters

set	global SCIP settings
messagehdlr	message handler
name	name of the parameter
value	new value of the parameter

Definition at line 3296 of file set.c.

Referenced by SCIPsetIntParam().

◆ SCIPsetSetDefaultIntParam()

SCIP_RETCODE SCIPsetSetDefaultIntParam	(	SCIP_SET *	set,
		const char *	name,
		int	defaultvalue
	)

changes the default value of an existing Int parameter

Parameters

set	global SCIP settings
name	name of the parameter
defaultvalue	new default value of the parameter

Definition at line 3311 of file set.c.

Referenced by SCIPsetConshdlrPresol(), SCIPsetConshdlrProp(), SCIPsetConshdlrSepa(), and SCIPsetPropPresol().

◆ SCIPsetChgLongintParam()

SCIP_RETCODE SCIPsetChgLongintParam	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		SCIP_PARAM *	param,
		SCIP_Longint	value
	)

changes the value of an existing SCIP_Longint parameter

Parameters

set	global SCIP settings
messagehdlr	message handler
param	parameter
value	new value of the parameter

Definition at line 3325 of file set.c.

Referenced by SCIPchgLongintParam().

◆ SCIPsetSetLongintParam()

SCIP_RETCODE SCIPsetSetLongintParam	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		const char *	name,
		SCIP_Longint	value
	)

changes the value of an existing SCIP_Longint parameter

Parameters

set	global SCIP settings
messagehdlr	message handler
name	name of the parameter
value	new value of the parameter

Definition at line 3348 of file set.c.

Referenced by SCIPsetLongintParam().

◆ SCIPsetChgRealParam()

SCIP_RETCODE SCIPsetChgRealParam	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		SCIP_PARAM *	param,
		SCIP_Real	value
	)

changes the value of an existing SCIP_Real parameter

Parameters

set	global SCIP settings
messagehdlr	message handler
param	parameter
value	new value of the parameter

Definition at line 3363 of file set.c.

Referenced by SCIPchgRealParam().

◆ SCIPsetSetRealParam()

SCIP_RETCODE SCIPsetSetRealParam	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		const char *	name,
		SCIP_Real	value
	)

changes the value of an existing SCIP_Real parameter

Parameters

set	global SCIP settings
messagehdlr	message handler
name	name of the parameter
value	new value of the parameter

Definition at line 3386 of file set.c.

Referenced by SCIPsetRealParam().

◆ SCIPsetChgCharParam()

SCIP_RETCODE SCIPsetChgCharParam	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		SCIP_PARAM *	param,
		char	value
	)

changes the value of an existing Char parameter

Parameters

set	global SCIP settings
messagehdlr	message handler
param	parameter
value	new value of the parameter

Definition at line 3401 of file set.c.

Referenced by SCIPchgCharParam().

◆ SCIPsetSetCharParam()

SCIP_RETCODE SCIPsetSetCharParam	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		const char *	name,
		char	value
	)

changes the value of an existing Char parameter

Parameters

set	global SCIP settings
messagehdlr	message handler
name	name of the parameter
value	new value of the parameter

Definition at line 3424 of file set.c.

Referenced by SCIPlpSolveAndEval(), and SCIPsetCharParam().

◆ SCIPsetChgStringParam()

SCIP_RETCODE SCIPsetChgStringParam	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		SCIP_PARAM *	param,
		const char *	value
	)

changes the value of an existing String parameter

Parameters

set	global SCIP settings
messagehdlr	message handler
param	parameter
value	new value of the parameter

Definition at line 3439 of file set.c.

Referenced by SCIPchgStringParam().

◆ SCIPsetSetStringParam()

SCIP_RETCODE SCIPsetSetStringParam	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		const char *	name,
		const char *	value
	)

changes the value of an existing String parameter

Parameters

set	global SCIP settings
messagehdlr	message handler
name	name of the parameter
value	new value of the parameter

Definition at line 3462 of file set.c.

Referenced by SCIPsetStringParam().

◆ SCIPsetSetParam()

SCIP_RETCODE SCIPsetSetParam	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		const char *	name,
		const char *	value
	)

changes the value of an existing parameter

Parameters

set	global SCIP settings
messagehdlr	message handler
name	name of the parameter
value	new value of the parameter as string

Definition at line 3477 of file set.c.

Referenced by SCIPsetParam().

◆ SCIPsetReadParams()

SCIP_RETCODE SCIPsetReadParams	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		const char *	filename
	)

reads parameters from a file

Parameters

set	global SCIP settings
messagehdlr	message handler
filename	file name

Definition at line 3492 of file set.c.

Referenced by SCIPreadParams().

◆ SCIPsetWriteParams()

SCIP_RETCODE SCIPsetWriteParams	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		const char *	filename,
		SCIP_Bool	comments,
		SCIP_Bool	onlychanged
	)

writes all parameters in the parameter set to a file

Parameters

set	global SCIP settings
messagehdlr	message handler
filename	file name, or NULL for stdout
comments	should parameter descriptions be written as comments?
onlychanged	should only the parameters been written, that are changed from default?

Definition at line 3506 of file set.c.

Referenced by SCIPwriteParams().

◆ SCIPsetResetParam()

SCIP_RETCODE SCIPsetResetParam	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		const char *	name
	)

resets a single parameters to its default value

Parameters

set	global SCIP settings
messagehdlr	message handler
name	name of the parameter

Definition at line 3522 of file set.c.

Referenced by SCIPresetParam().

◆ SCIPsetResetParams()

SCIP_RETCODE SCIPsetResetParams	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr
	)

resets all parameters to their default values

Parameters

set	global SCIP settings
messagehdlr	message handler

Definition at line 3534 of file set.c.

Referenced by SCIPresetParams().

◆ SCIPsetSetEmphasis()

SCIP_RETCODE SCIPsetSetEmphasis	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		SCIP_PARAMEMPHASIS	paramemphasis,
		SCIP_Bool	quiet
	)

sets parameters to

SCIP_PARAMEMPHASIS_DEFAULT to use default values (see also SCIPsetResetParams())
SCIP_PARAMEMPHASIS_COUNTER to get feasible and "fast" counting process
SCIP_PARAMEMPHASIS_CPSOLVER to get CP like search (e.g. no LP relaxation)
SCIP_PARAMEMPHASIS_EASYCIP to solve easy problems fast
SCIP_PARAMEMPHASIS_FEASIBILITY to detect feasibility fast
SCIP_PARAMEMPHASIS_HARDLP to be capable to handle hard LPs
SCIP_PARAMEMPHASIS_OPTIMALITY to prove optimality fast
SCIP_PARAMEMPHASIS_PHASEFEAS to find feasible solutions during a 3 phase solution process
SCIP_PARAMEMPHASIS_PHASEIMPROVE to find improved solutions during a 3 phase solution process
SCIP_PARAMEMPHASIS_PHASEPROOF to proof optimality during a 3 phase solution process

Parameters

set	global SCIP settings
messagehdlr	message handler
paramemphasis	parameter settings
quiet	should the parameter be set quiet (no output)

Definition at line 3557 of file set.c.

References SCIP_CALL, SCIP_OKAY, and SCIPparamsetSetEmphasis().

Referenced by SCIPsetEmphasis().

◆ SCIPsetSetSubscipsOff()

SCIP_RETCODE SCIPsetSetSubscipsOff	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		SCIP_Bool	quiet
	)

sets parameters to deactivate separators and heuristics that use auxiliary SCIP instances; should be called for auxiliary SCIP instances to avoid recursion

Parameters

set	global SCIP settings
messagehdlr	message handler
quiet	should the parameter be set quiet (no output)

Definition at line 3572 of file set.c.

References SCIP_CALL, SCIP_OKAY, and SCIPparamsetSetToSubscipsOff().

Referenced by SCIPsetSubscipsOff().

◆ SCIPsetSetHeuristics()

SCIP_RETCODE SCIPsetSetHeuristics	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		SCIP_PARAMSETTING	paramsetting,
		SCIP_Bool	quiet
	)

sets heuristic parameters values to

SCIP_PARAMSETTING_DEFAULT which are the default values of all heuristic parameters
SCIP_PARAMSETTING_FAST such that the time spent on heuristics is decreased
SCIP_PARAMSETTING_AGGRESSIVE such that the heuristics are called more aggressively
SCIP_PARAMSETTING_OFF which turn off all heuristics

Parameters

set	global SCIP settings
messagehdlr	message handler
paramsetting	parameter settings
quiet	should the parameter be set quiet (no output)

Definition at line 3589 of file set.c.

References SCIP_CALL, SCIP_OKAY, and SCIPparamsetSetHeuristics().

Referenced by emphasisParse(), and SCIPsetHeuristics().

◆ SCIPsetSetPresolving()

SCIP_RETCODE SCIPsetSetPresolving	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		SCIP_PARAMSETTING	paramsetting,
		SCIP_Bool	quiet
	)

sets presolving parameters to

SCIP_PARAMSETTING_DEFAULT which are the default values of all presolving parameters
SCIP_PARAMSETTING_FAST such that the time spent on presolving is decreased
SCIP_PARAMSETTING_AGGRESSIVE such that the presolving is more aggressive
SCIP_PARAMSETTING_OFF which turn off all presolving

Parameters

set	global SCIP settings
messagehdlr	message handler
paramsetting	parameter settings
quiet	should the parameter be set quiet (no output)

Definition at line 3607 of file set.c.

References SCIP_CALL, SCIP_OKAY, and SCIPparamsetSetPresolving().

Referenced by emphasisParse(), and SCIPsetPresolving().

◆ SCIPsetSetSeparating()

SCIP_RETCODE SCIPsetSetSeparating	(	SCIP_SET *	set,
		SCIP_MESSAGEHDLR *	messagehdlr,
		SCIP_PARAMSETTING	paramsetting,
		SCIP_Bool	quiet
	)

sets separating parameters to

SCIP_PARAMSETTING_DEFAULT which are the default values of all separating parameters
SCIP_PARAMSETTING_FAST such that the time spent on separating is decreased
SCIP_PARAMSETTING_AGGRESSIVE such that separating is more aggressive
SCIP_PARAMSETTING_OFF which turn off all separating

Parameters

set	global SCIP settings
messagehdlr	message handler
paramsetting	parameter settings
quiet	should the parameter be set quiet (no output)

Definition at line 3625 of file set.c.

References SCIP_CALL, SCIP_OKAY, and SCIPparamsetSetSeparating().

Referenced by emphasisParse(), and SCIPsetSeparating().

◆ SCIPsetGetParams()

SCIP_PARAM ** SCIPsetGetParams ( SCIP_SET * set )

returns the array of all available SCIP parameters

Parameters

set	global SCIP settings

Definition at line 3638 of file set.c.

Referenced by SCIPgetParams().

◆ SCIPsetGetNParams()

int SCIPsetGetNParams ( SCIP_SET * set )

returns the total number of all available SCIP parameters

Parameters

set	global SCIP settings

Definition at line 3648 of file set.c.

Referenced by SCIPgetNParams().

◆ SCIPsetIncludeReader()

SCIP_RETCODE SCIPsetIncludeReader	(	SCIP_SET *	set,
		SCIP_READER *	reader
	)

inserts file reader in file reader list

Parameters

set	global SCIP settings
reader	file reader

Definition at line 3658 of file set.c.

Referenced by SCIPincludeReader(), and SCIPincludeReaderBasic().

◆ SCIPsetFindReader()

SCIP_READER * SCIPsetFindReader	(	SCIP_SET *	set,
		const char *	name
	)

returns the file reader of the given name, or NULL if not existing

Parameters

set	global SCIP settings
name	name of file reader

Definition at line 3680 of file set.c.

Referenced by SCIPfindReader().

◆ SCIPsetIncludePricer()

SCIP_RETCODE SCIPsetIncludePricer	(	SCIP_SET *	set,
		SCIP_PRICER *	pricer
	)

inserts variable pricer in variable pricer list

Parameters

set	global SCIP settings
pricer	variable pricer

Definition at line 3700 of file set.c.

Referenced by SCIPincludePricer(), and SCIPincludePricerBasic().

◆ SCIPsetFindPricer()

SCIP_PRICER * SCIPsetFindPricer	(	SCIP_SET *	set,
		const char *	name
	)

returns the variable pricer of the given name, or NULL if not existing

Parameters

set	global SCIP settings
name	name of variable pricer

Definition at line 3723 of file set.c.

Referenced by SCIPfindPricer().

◆ SCIPsetSortPricers()

void SCIPsetSortPricers ( SCIP_SET * set )

sorts pricers by priorities

Parameters

set	global SCIP settings

Definition at line 3743 of file set.c.

Referenced by SCIPgetPricers(), and SCIPpriceLoop().

◆ SCIPsetSortPricersName()

void SCIPsetSortPricersName ( SCIP_SET * set )

sorts pricers by name

Parameters

set	global SCIP settings

Definition at line 3758 of file set.c.

Referenced by SCIPprintPricerStatistics().

◆ SCIPsetIncludeBenders()

SCIP_RETCODE SCIPsetIncludeBenders	(	SCIP_SET *	set,
		SCIP_BENDERS *	benders
	)

inserts Benders' decomposition in the Benders' decomposition list

Parameters

set	global SCIP settings
benders	Benders' decomposition structure

Definition at line 3773 of file set.c.

Referenced by SCIPincludeBenders(), and SCIPincludeBendersBasic().

◆ SCIPsetFindBenders()

SCIP_BENDERS * SCIPsetFindBenders	(	SCIP_SET *	set,
		const char *	name
	)

returns the Benders' decomposition of the given name, or NULL if not existing

Parameters

set	global SCIP settings
name	name of the Benders' decomposition

Definition at line 3796 of file set.c.

Referenced by SCIPbendersCopyInclude(), and SCIPfindBenders().

◆ SCIPsetSortBenders()

void SCIPsetSortBenders ( SCIP_SET * set )

sorts Benders' decomposition by priorities

Parameters

set	global SCIP settings

Definition at line 3816 of file set.c.

Referenced by SCIPgetBenders().

◆ SCIPsetSortBendersName()

void SCIPsetSortBendersName ( SCIP_SET * set )

sorts Benders' decomposition by name

Parameters

set	global SCIP settings

Definition at line 3831 of file set.c.

◆ SCIPsetIncludeConshdlr()

SCIP_RETCODE SCIPsetIncludeConshdlr	(	SCIP_SET *	set,
		SCIP_CONSHDLR *	conshdlr
	)

inserts constraint handler in constraint handler list

Parameters

set	global SCIP settings
conshdlr	constraint handler

Definition at line 3846 of file set.c.

Referenced by SCIPincludeConshdlr(), and SCIPincludeConshdlrBasic().

◆ SCIPsetReinsertConshdlrSepaPrio()

void SCIPsetReinsertConshdlrSepaPrio	(	SCIP_SET *	set,
		SCIP_CONSHDLR *	conshdlr,
		int	oldpriority
	)

reinserts a constraint handler with modified sepa priority into the sepa priority sorted array

Parameters

set	global SCIP settings
conshdlr	constraint handler to be reinserted
oldpriority	the old separation priority of constraint handler

Definition at line 3902 of file set.c.

Referenced by SCIPsetConshdlrSepa().

◆ SCIPsetFindConshdlr()

SCIP_CONSHDLR * SCIPsetFindConshdlr	(	SCIP_SET *	set,
		const char *	name
	)

returns the constraint handler of the given name, or NULL if not existing

Parameters

set	global SCIP settings
name	name of constraint handler

Definition at line 3985 of file set.c.

Referenced by paramsetSetPresolvingAggressive(), paramsetSetPresolvingFast(), paramsetSetSeparatingAggressive(), paramsetSetSeparatingFast(), SCIPconsParse(), SCIPfindConshdlr(), SCIPparamsetSetEmphasis(), and SCIPparamsetSetToSubscipsOff().

◆ SCIPsetIncludeConflicthdlr()

SCIP_RETCODE SCIPsetIncludeConflicthdlr	(	SCIP_SET *	set,
		SCIP_CONFLICTHDLR *	conflicthdlr
	)

inserts conflict handler in conflict handler list

Parameters

set	global SCIP settings
conflicthdlr	conflict handler

Definition at line 4005 of file set.c.

Referenced by SCIPincludeConflicthdlr(), and SCIPincludeConflicthdlrBasic().

◆ SCIPsetFindConflicthdlr()

SCIP_CONFLICTHDLR * SCIPsetFindConflicthdlr	(	SCIP_SET *	set,
		const char *	name
	)

returns the conflict handler of the given name, or NULL if not existing

Parameters

set	global SCIP settings
name	name of conflict handler

Definition at line 4029 of file set.c.

Referenced by SCIPfindConflicthdlr().

◆ SCIPsetSortConflicthdlrs()

void SCIPsetSortConflicthdlrs ( SCIP_SET * set )

sorts conflict handlers by priorities

Parameters

set	global SCIP settings

Definition at line 4049 of file set.c.

Referenced by conflictAddConflictCons(), and SCIPgetConflicthdlrs().

◆ SCIPsetSortConflicthdlrsName()

void SCIPsetSortConflicthdlrsName ( SCIP_SET * set )

sorts conflict handlers by name

Parameters

set	global SCIP settings

Definition at line 4064 of file set.c.

◆ SCIPsetIncludePresol()

SCIP_RETCODE SCIPsetIncludePresol	(	SCIP_SET *	set,
		SCIP_PRESOL *	presol
	)

inserts presolver in presolver list

Parameters

set	global SCIP settings
presol	presolver

Definition at line 4079 of file set.c.

Referenced by SCIPincludePresol(), and SCIPincludePresolBasic().

◆ SCIPsetFindPresol()

SCIP_PRESOL * SCIPsetFindPresol	(	SCIP_SET *	set,
		const char *	name
	)

returns the presolver of the given name, or NULL if not existing

Parameters

set	global SCIP settings
name	name of presolver

Definition at line 4102 of file set.c.

Referenced by paramsetSetPresolvingFast(), and SCIPfindPresol().

◆ SCIPsetSortPresols()

void SCIPsetSortPresols ( SCIP_SET * set )

sorts presolvers by priorities

Parameters

set	global SCIP settings

Definition at line 4122 of file set.c.

Referenced by presolve(), and SCIPgetPresols().

◆ SCIPsetSortPresolsName()

void SCIPsetSortPresolsName ( SCIP_SET * set )

sorts presolvers by name

Parameters

set	global SCIP settings

Definition at line 4137 of file set.c.

Referenced by SCIPprintPresolverStatistics().

◆ SCIPsetIncludeRelax()

SCIP_RETCODE SCIPsetIncludeRelax	(	SCIP_SET *	set,
		SCIP_RELAX *	relax
	)

inserts relaxator in relaxator list

Parameters

set	global SCIP settings
relax	relaxator

Definition at line 4152 of file set.c.

Referenced by SCIPincludeRelax(), and SCIPincludeRelaxBasic().

◆ SCIPsetFindRelax()

SCIP_RELAX * SCIPsetFindRelax	(	SCIP_SET *	set,
		const char *	name
	)

returns the relaxator of the given name, or NULL if not existing

Parameters

set	global SCIP settings
name	name of relaxator

Definition at line 4176 of file set.c.

Referenced by SCIPfindRelax().

◆ SCIPsetSortRelaxs()

void SCIPsetSortRelaxs ( SCIP_SET * set )

sorts relaxators by priorities

Parameters

set	global SCIP settings

Definition at line 4196 of file set.c.

Referenced by SCIPgetRelaxs(), SCIPsolveProbingRelax(), and solveNodeRelax().

◆ SCIPsetSortRelaxsName()

void SCIPsetSortRelaxsName ( SCIP_SET * set )

sorts relaxators by priorities

Parameters

set	global SCIP settings

Definition at line 4211 of file set.c.

Referenced by SCIPprintRelaxatorStatistics().

◆ SCIPsetIncludeSepa()

SCIP_RETCODE SCIPsetIncludeSepa	(	SCIP_SET *	set,
		SCIP_SEPA *	sepa
	)

inserts separator in separator list

Parameters

set	global SCIP settings
sepa	separator

Definition at line 4226 of file set.c.

Referenced by SCIPincludeSepa(), and SCIPincludeSepaBasic().

◆ SCIPsetFindSepa()

SCIP_SEPA * SCIPsetFindSepa	(	SCIP_SET *	set,
		const char *	name
	)

returns the separator of the given name, or NULL if not existing

Parameters

set	global SCIP settings
name	name of separator

Definition at line 4250 of file set.c.

Referenced by paramsetSetSeparatingAggressive(), paramsetSetSeparatingFast(), and SCIPfindSepa().

◆ SCIPsetSortSepas()

void SCIPsetSortSepas ( SCIP_SET * set )

sorts separators by priorities

Parameters

set	global SCIP settings

Definition at line 4270 of file set.c.

Referenced by SCIPgetSepas(), separationRoundLP(), and separationRoundSol().

◆ SCIPsetSortSepasName()

void SCIPsetSortSepasName ( SCIP_SET * set )

sorts separators by name

Parameters

set	global SCIP settings

Definition at line 4285 of file set.c.

Referenced by SCIPprintSeparatorStatistics().

◆ SCIPsetIncludeCutsel()

SCIP_RETCODE SCIPsetIncludeCutsel	(	SCIP_SET *	set,
		SCIP_CUTSEL *	cutsel
	)

inserts cut selector in cut selector list

Parameters

set	global SCIP settings
cutsel	cut selector

Definition at line 4300 of file set.c.

Referenced by SCIPincludeCutsel(), and SCIPincludeCutselBasic().

◆ SCIPsetFindCutsel()

SCIP_CUTSEL * SCIPsetFindCutsel	(	SCIP_SET *	set,
		const char *	name
	)

returns the cut selector of the given name, or NULL if not existing

Parameters

set	global SCIP settings
name	name of separator

Definition at line 4324 of file set.c.

Referenced by SCIPfindCutsel().

◆ SCIPsetSortCutsels()

void SCIPsetSortCutsels ( SCIP_SET * set )

sorts cut selectors by priorities

Parameters

set	global SCIP settings

Definition at line 4344 of file set.c.

Referenced by SCIPcutselsSelect(), SCIPgetCutsels(), and SCIPprintCutselectorStatistics().

◆ SCIPsetIncludeProp()

SCIP_RETCODE SCIPsetIncludeProp	(	SCIP_SET *	set,
		SCIP_PROP *	prop
	)

inserts propagator in propagator list

Parameters

set	global SCIP settings
prop	propagator

Definition at line 4358 of file set.c.

Referenced by SCIPincludeProp(), and SCIPincludePropBasic().

◆ SCIPsetFindProp()

SCIP_PROP * SCIPsetFindProp	(	SCIP_SET *	set,
		const char *	name
	)

returns the propagator of the given name, or NULL if not existing

Parameters

set	global SCIP settings
name	name of propagator

Definition at line 4385 of file set.c.

Referenced by paramsetSetPresolvingFast(), and SCIPfindProp().

◆ SCIPsetSortProps()

void SCIPsetSortProps ( SCIP_SET * set )

sorts propagators by priorities

Parameters

set	global SCIP settings

Definition at line 4405 of file set.c.

Referenced by propagationRound(), and SCIPgetProps().

◆ SCIPsetSortPropsPresol()

void SCIPsetSortPropsPresol ( SCIP_SET * set )

sorts propagators by priorities for presolving

Parameters

set	global SCIP settings

Definition at line 4420 of file set.c.

Referenced by presolve().

◆ SCIPsetSortPropsName()

void SCIPsetSortPropsName ( SCIP_SET * set )

sorts propagators w.r.t. names

Parameters

set	global SCIP settings

Definition at line 4435 of file set.c.

Referenced by SCIPprintPresolverStatistics(), and SCIPprintPropagatorStatistics().

◆ SCIPsetIncludeBanditvtable()

SCIP_RETCODE SCIPsetIncludeBanditvtable	(	SCIP_SET *	set,
		SCIP_BANDITVTABLE *	banditvtable
	)

inserts bandit virtual function table into set

Parameters

set	global SCIP settings
banditvtable	bandit algorithm virtual function table

Definition at line 4450 of file set.c.

Referenced by SCIPincludeBanditvtable().

◆ SCIPsetFindBanditvtable()

SCIP_BANDITVTABLE * SCIPsetFindBanditvtable	(	SCIP_SET *	set,
		const char *	name
	)

returns the bandit virtual function table of the given name, or NULL if not existing

Parameters

set	global SCIP settings
name	name of bandit algorithm virtual function table

Definition at line 4472 of file set.c.

Referenced by SCIPfindBanditvtable().

◆ SCIPsetIncludeConcsolverType()

SCIP_RETCODE SCIPsetIncludeConcsolverType	(	SCIP_SET *	set,
		SCIP_CONCSOLVERTYPE *	concsolvertype
	)

inserts concurrent solver type into the concurrent solver type list

Parameters

set	global SCIP settings
concsolvertype	concurrent solver type

Definition at line 4493 of file set.c.

Referenced by SCIPincludeConcsolverType().

◆ SCIPsetFindConcsolverType()

SCIP_CONCSOLVERTYPE * SCIPsetFindConcsolverType	(	SCIP_SET *	set,
		const char *	name
	)

returns the concurrent solver type with the given name, or NULL if not existing

Parameters

set	global SCIP settings
name	name of concurrent solver type

Definition at line 4515 of file set.c.

Referenced by SCIPfindConcsolverType().

◆ SCIPsetIncludeConcsolver()

SCIP_RETCODE SCIPsetIncludeConcsolver	(	SCIP_SET *	set,
		SCIP_CONCSOLVER *	concsolver
	)

inserts concurrent solver into the concurrent solver list

Parameters

set	global SCIP settings
concsolver	concurrent solver

Definition at line 4535 of file set.c.

Referenced by SCIPaddConcurrentSolver().

◆ SCIPsetFreeConcsolvers()

SCIP_RETCODE SCIPsetFreeConcsolvers ( SCIP_SET * set )

frees all concurrent solvers in the concurrent solver list

Parameters

set	global SCIP settings

Definition at line 4559 of file set.c.

Referenced by SCIPfreeProb().

◆ SCIPsetIncludeHeur()

SCIP_RETCODE SCIPsetIncludeHeur	(	SCIP_SET *	set,
		SCIP_HEUR *	heur
	)

inserts primal heuristic in primal heuristic list

Parameters

set	global SCIP settings
heur	primal heuristic

Definition at line 4581 of file set.c.

Referenced by SCIPincludeHeur(), and SCIPincludeHeurBasic().

◆ SCIPsetFindHeur()

SCIP_HEUR * SCIPsetFindHeur	(	SCIP_SET *	set,
		const char *	name
	)

returns the primal heuristic of the given name, or NULL if not existing

Parameters

set	global SCIP settings
name	name of primal heuristic

Definition at line 4605 of file set.c.

Referenced by paramsetSetHeuristicsAggressive(), and SCIPfindHeur().

◆ SCIPsetSortHeurs()

void SCIPsetSortHeurs ( SCIP_SET * set )

sorts heuristics by their delay positions and priorities

Parameters

set	global SCIP settings

Definition at line 4625 of file set.c.

Referenced by SCIPprimalHeuristics().

◆ SCIPsetSortHeursName()

void SCIPsetSortHeursName ( SCIP_SET * set )

sorts heuristics by names

Parameters

set	global SCIP settings

Definition at line 4640 of file set.c.

Referenced by SCIPprintHeuristicStatistics().

◆ SCIPsetIncludeCompr()

SCIP_RETCODE SCIPsetIncludeCompr	(	SCIP_SET *	set,
		SCIP_COMPR *	compr
	)

inserts tree compression in tree compression list

Parameters

set	global SCIP settings
compr	tree compression

Definition at line 4655 of file set.c.

Referenced by SCIPincludeCompr(), and SCIPincludeComprBasic().

◆ SCIPsetFindCompr()

SCIP_COMPR * SCIPsetFindCompr	(	SCIP_SET *	set,
		const char *	name
	)

returns the tree compression of the given name, or NULL if not existing

Parameters

set	global SCIP settings
name	name of tree compression

Definition at line 4679 of file set.c.

Referenced by SCIPfindCompr().

◆ SCIPsetSortComprs()

void SCIPsetSortComprs ( SCIP_SET * set )

sorts compressions by priorities

Parameters

set	global SCIP settings

Definition at line 4699 of file set.c.

Referenced by compressReoptTree(), and SCIPgetComprs().

◆ SCIPsetSortComprsName()

void SCIPsetSortComprsName ( SCIP_SET * set )

sorts heuristics by names

Parameters

set	global SCIP settings

Definition at line 4714 of file set.c.

Referenced by SCIPprintCompressionStatistics().

◆ SCIPsetIncludeEventhdlr()

SCIP_RETCODE SCIPsetIncludeEventhdlr	(	SCIP_SET *	set,
		SCIP_EVENTHDLR *	eventhdlr
	)

inserts event handler in event handler list

Parameters

set	global SCIP settings
eventhdlr	event handler

Definition at line 4729 of file set.c.

Referenced by SCIPconflictstoreCreate(), SCIPincludeEventhdlr(), SCIPincludeEventhdlrBasic(), SCIPnlpInclude(), and SCIPreoptCreate().

◆ SCIPsetFindEventhdlr()

SCIP_EVENTHDLR * SCIPsetFindEventhdlr	(	SCIP_SET *	set,
		const char *	name
	)

returns the event handler of the given name, or NULL if not existing

Parameters

set	global SCIP settings
name	name of event handler

Definition at line 4752 of file set.c.

Referenced by SCIPconflictstoreCreate(), SCIPfindEventhdlr(), SCIPnlpCreate(), and SCIPnlpInclude().

◆ SCIPsetIncludeNodesel()

SCIP_RETCODE SCIPsetIncludeNodesel	(	SCIP_SET *	set,
		SCIP_NODESEL *	nodesel
	)

inserts node selector in node selector list

Parameters

set	global SCIP settings
nodesel	node selector

Definition at line 4772 of file set.c.

Referenced by SCIPincludeNodesel(), and SCIPincludeNodeselBasic().

◆ SCIPsetFindNodesel()

SCIP_NODESEL * SCIPsetFindNodesel	(	SCIP_SET *	set,
		const char *	name
	)

returns the node selector of the given name, or NULL if not existing

Parameters

set	global SCIP settings
name	name of event handler

Definition at line 4803 of file set.c.

Referenced by SCIPfindNodesel().

◆ SCIPsetGetNodesel()

SCIP_NODESEL * SCIPsetGetNodesel	(	SCIP_SET *	set,
		SCIP_STAT *	stat
	)

returns node selector with highest priority in the current mode

Parameters

set	global SCIP settings
stat	dynamic problem statistics

Definition at line 4823 of file set.c.

Referenced by SCIPgetNodesel(), SCIPsolve(), SCIPsolveCIP(), and SCIPtransformProb().

◆ SCIPsetIncludeBranchrule()

SCIP_RETCODE SCIPsetIncludeBranchrule	(	SCIP_SET *	set,
		SCIP_BRANCHRULE *	branchrule
	)

inserts branching rule in branching rule list

Parameters

set	global SCIP settings
branchrule	branching rule

Definition at line 4861 of file set.c.

Referenced by SCIPincludeBranchrule(), and SCIPincludeBranchruleBasic().

◆ SCIPsetFindBranchrule()

SCIP_BRANCHRULE * SCIPsetFindBranchrule	(	SCIP_SET *	set,
		const char *	name
	)

returns the branching rule of the given name, or NULL if not existing

Parameters

set	global SCIP settings
name	name of event handler

Definition at line 4885 of file set.c.

Referenced by SCIPfindBranchrule(), and SCIPreoptAddDualBndchg().

◆ SCIPsetSortBranchrules()

void SCIPsetSortBranchrules ( SCIP_SET * set )

sorts branching rules by priorities

Parameters

set	global SCIP settings

Definition at line 4905 of file set.c.

Referenced by SCIPbranchExecExtern(), SCIPbranchExecLP(), SCIPbranchExecPseudo(), and SCIPfindBranchrule().

◆ SCIPsetSortBranchrulesName()

void SCIPsetSortBranchrulesName ( SCIP_SET * set )

sorts branching rules by priorities

Parameters

set	global SCIP settings

Definition at line 4920 of file set.c.

Referenced by SCIPprintBranchruleStatistics().

◆ SCIPsetIncludeDisp()

SCIP_RETCODE SCIPsetIncludeDisp	(	SCIP_SET *	set,
		SCIP_DISP *	disp
	)

inserts display column in display column list

Parameters

set	global SCIP settings
disp	display column

Definition at line 4935 of file set.c.

Referenced by SCIPincludeDisp().

◆ SCIPsetFindDisp()

SCIP_DISP * SCIPsetFindDisp	(	SCIP_SET *	set,
		const char *	name
	)

returns the display column of the given name, or NULL if not existing

Parameters

set	global SCIP settings
name	name of display

Definition at line 4967 of file set.c.

Referenced by SCIPfindDisp().

◆ SCIPsetIncludeTable()

SCIP_RETCODE SCIPsetIncludeTable	(	SCIP_SET *	set,
		SCIP_TABLE *	table
	)

inserts statistics table in statistics table list

Parameters

set	global SCIP settings
table	statistics table

Definition at line 4987 of file set.c.

Referenced by SCIPincludeTable().

◆ SCIPsetFindTable()

SCIP_TABLE * SCIPsetFindTable	(	SCIP_SET *	set,
		const char *	name
	)

returns the statistics table of the given name, or NULL if not existing

Parameters

set	global SCIP settings
name	name of statistics table

Definition at line 5012 of file set.c.

Referenced by SCIPfindTable().

◆ SCIPsetIncludeDialog()

SCIP_RETCODE SCIPsetIncludeDialog	(	SCIP_SET *	set,
		SCIP_DIALOG *	dialog
	)

inserts dialog in dialog list

Parameters

set	global SCIP settings
dialog	dialog

Definition at line 5032 of file set.c.

Referenced by SCIPincludeDialog().

◆ SCIPsetExistsDialog()

SCIP_Bool SCIPsetExistsDialog	(	SCIP_SET *	set,
		SCIP_DIALOG *	dialog
	)

returns if the dialog already exists

Parameters

set	global SCIP settings
dialog	dialog

Definition at line 5054 of file set.c.

Referenced by SCIPexistsDialog().

◆ SCIPsetIncludeExprhdlr()

SCIP_RETCODE SCIPsetIncludeExprhdlr	(	SCIP_SET *	set,
		SCIP_EXPRHDLR *	exprhdlr
	)

inserts expression handler in expression handler list

Parameters

set	global SCIP settings
exprhdlr	expression handler

Definition at line 5076 of file set.c.

Referenced by SCIPincludeExprhdlr().

◆ SCIPsetFindExprhdlr()

SCIP_EXPRHDLR * SCIPsetFindExprhdlr	(	SCIP_SET *	set,
		const char *	name
	)

returns the expression handler of the given name, or NULL if not existing

Parameters

set	global SCIP settings
name	name of expression handler

Definition at line 5110 of file set.c.

Referenced by SCIPexprCopy(), and SCIPfindExprhdlr().

◆ SCIPsetSortExprhdlrs()

void SCIPsetSortExprhdlrs ( SCIP_SET * set )

sorts expression handlers by name

Parameters

set	global SCIP settings

Definition at line 5128 of file set.c.

◆ SCIPsetIncludeNlpi()

SCIP_RETCODE SCIPsetIncludeNlpi	(	SCIP_SET *	set,
		SCIP_NLPI *	nlpi
	)

inserts NLPI in NLPI list

Parameters

set	global SCIP settings
nlpi	NLPI

Definition at line 5142 of file set.c.

Referenced by SCIPincludeNlpi().

◆ SCIPsetFindNlpi()

SCIP_NLPI * SCIPsetFindNlpi	(	SCIP_SET *	set,
		const char *	name
	)

returns the NLPI of the given name, or NULL if not existing

Parameters

set	global SCIP settings
name	name of NLPI

Definition at line 5165 of file set.c.

Referenced by SCIPfindNlpi(), SCIPmergeNLPIStatistics(), and SCIPnlpCreate().

◆ SCIPsetSortNlpis()

void SCIPsetSortNlpis ( SCIP_SET * set )

sorts NLPIs by priorities

Parameters

set	global SCIP settings

Definition at line 5185 of file set.c.

Referenced by SCIPgetNlpis(), and SCIPnlpCreate().

◆ SCIPsetSetPriorityNlpi()

void SCIPsetSetPriorityNlpi	(	SCIP_SET *	set,
		SCIP_NLPI *	nlpi,
		int	priority
	)

set priority of an NLPI

Parameters

set	global SCIP settings
nlpi	NLPI
priority	new priority of NLPI

Definition at line 5199 of file set.c.

Referenced by SCIPsetNlpiPriority().

◆ SCIPsetIncludeExternalCode()

SCIP_RETCODE SCIPsetIncludeExternalCode	(	SCIP_SET *	set,
		const char *	name,
		const char *	description
	)

inserts information about an external code in external codes list

Parameters

set	global SCIP settings
name	name of external code
description	description of external code, can be NULL

Definition at line 5213 of file set.c.

Referenced by doScipCreate(), SCIPdialoghdlrCreate(), and SCIPincludeExternalCodeInformation().

◆ SCIPsetInitPlugins()

SCIP_RETCODE SCIPsetInitPlugins	(	SCIP_SET *	set,
		BMS_BLKMEM *	blkmem,
		SCIP_STAT *	stat
	)

calls init methods of all plugins

Parameters

set	global SCIP settings
blkmem	block memory
stat	dynamic problem statistics

Definition at line 5245 of file set.c.

Referenced by prepareReoptimization(), and SCIPtransformProb().

◆ SCIPsetExitPlugins()

SCIP_RETCODE SCIPsetExitPlugins	(	SCIP_SET *	set,
		BMS_BLKMEM *	blkmem,
		SCIP_STAT *	stat
	)

calls exit methods of all plugins

Parameters

set	global SCIP settings
blkmem	block memory
stat	dynamic problem statistics

Definition at line 5366 of file set.c.

Referenced by freeReoptSolve(), and freeTransform().

◆ SCIPsetInitprePlugins()

SCIP_RETCODE SCIPsetInitprePlugins	(	SCIP_SET *	set,
		BMS_BLKMEM *	blkmem,
		SCIP_STAT *	stat
	)

calls initpre methods of all plugins

Parameters

set	global SCIP settings
blkmem	block memory
stat	dynamic problem statistics

Definition at line 5478 of file set.c.

Referenced by initPresolve().

◆ SCIPsetExitprePlugins()

SCIP_RETCODE SCIPsetExitprePlugins	(	SCIP_SET *	set,
		BMS_BLKMEM *	blkmem,
		SCIP_STAT *	stat
	)

calls exitpre methods of all plugins

Parameters

set	global SCIP settings
blkmem	block memory
stat	dynamic problem statistics

Definition at line 5516 of file set.c.

Referenced by exitPresolve().

◆ SCIPsetInitsolPlugins()

SCIP_RETCODE SCIPsetInitsolPlugins	(	SCIP_SET *	set,
		BMS_BLKMEM *	blkmem,
		SCIP_STAT *	stat
	)

calls initsol methods of all plugins

Parameters

set	global SCIP settings
blkmem	block memory
stat	dynamic problem statistics

Definition at line 5554 of file set.c.

Referenced by initSolve().

◆ SCIPsetExitsolPlugins()

SCIP_RETCODE SCIPsetExitsolPlugins	(	SCIP_SET *	set,
		BMS_BLKMEM *	blkmem,
		SCIP_STAT *	stat,
		SCIP_Bool	restart
	)

calls exitsol methods of all plugins

Parameters

set	global SCIP settings
blkmem	block memory
stat	dynamic problem statistics
restart	was this exit solve call triggered by a restart?

Definition at line 5663 of file set.c.

Referenced by freeReoptSolve(), and freeSolve().

◆ SCIPsetCalcMemGrowSize()

int SCIPsetCalcMemGrowSize	(	SCIP_SET *	set,
		int	num
	)

calculate memory size for dynamically allocated arrays

Parameters

set	global SCIP settings
num	minimum number of entries to store

Definition at line 5764 of file set.c.

Referenced by checkMemDualCons(), checkMemGlbCons(), cliqueEnsureSize(), cliquelistEnsureSize(), cliquetableEnsureSize(), colEnsureSize(), conflictEnsureConflictsetsMem(), conflictEnsureProofsetsMem(), conflictEnsureTmpbdchginfosMem(), conflictsetEnsureBdchginfosMem(), conflictstoreAddOrigConflict(), conflictstoreEnsureMem(), conshdlrEnsureCheckconssMem(), conshdlrEnsureConssMem(), conshdlrEnsureEnfoconssMem(), conshdlrEnsureInitconssMem(), conshdlrEnsurePropconssMem(), conshdlrEnsureSepaconssMem(), conshdlrEnsureUpdateconssMem(), conssetchgEnsureAddedconssSize(), conssetchgEnsureDisabledconssSize(), cutpoolEnsureCutsMem(), domchgEnsureBoundchgsSize(), domchgEnsureHolechgsSize(), ensureActiveconssSize(), ensureCandsSize(), ensureChgcolsSize(), ensureChgrowsSize(), ensureColsSize(), ensureExistingsolsSize(), ensureExterncandsSize(), ensureLazycolsSize(), ensureLpcandsSize(), ensureLpicolsSize(), ensureLpirowsSize(), ensurePartialsolsSize(), ensurePropagationStorage(), ensurePseudocandsSize(), ensureRowsSize(), ensureRunSize(), ensureSidechgsSize(), ensureSolsSize(), ensureSubdialogMem(), eventfilterEnsureMem(), eventqueueEnsureEventsMem(), hashExpr(), implicsEnsureSize(), nlpCalcFracVars(), nlpEnsureNlRowsSolverSize(), nlpEnsureVarsSolverSize(), pricestoreEnsureBdviolvarsMem(), pricestoreEnsureVarsMem(), probEnsureConssMem(), probEnsureDeletedvarsMem(), probEnsureFixedvarsMem(), probEnsureVarsMem(), reoptnodeCheckMemory(), reoptSaveNewObj(), reopttreeCheckMemory(), saveAfterDualBranchings(), SCIPbendersIncludeBenderscut(), SCIPbendersStoreCut(), SCIPcalcMemGrowSize(), SCIPensureBlockMemoryArray_call(), SCIPexprAppendChild(), SCIPnlpEnsureNlRowsSize(), SCIPnlpEnsureVarsSize(), SCIPnlrowEnsureLinearSize(), SCIPreoptAddCons(), SCIProwEnsureSize(), SCIPvaluehistoryFind(), sepastoreEnsureCutsMem(), treeEnsureChildrenMem(), treeEnsurePendingbdchgsMem(), varEnsureLbchginfosSize(), varEnsureParentvarsSize(), varEnsureUbchginfosSize(), and vboundsEnsureSize().

◆ SCIPsetCalcTreeGrowSize()

int SCIPsetCalcTreeGrowSize	(	SCIP_SET *	set,
		int	num
	)

calculate memory size for tree array

Parameters

set	global SCIP settings
num	minimum number of entries to store

Definition at line 5773 of file set.c.

Referenced by nodepqResize().

◆ SCIPsetCalcPathGrowSize()

int SCIPsetCalcPathGrowSize	(	SCIP_SET *	set,
		int	num
	)

calculate memory size for path array

Parameters

set	global SCIP settings
num	minimum number of entries to store

Definition at line 5782 of file set.c.

Referenced by treeEnsurePathMem().

◆ SCIPsetSetVerbLevel()

SCIP_RETCODE SCIPsetSetVerbLevel	(	SCIP_SET *	set,
		SCIP_VERBLEVEL	verblevel
	)

sets verbosity level for message output

Parameters

set	global SCIP settings
verblevel	verbosity level for message output

Definition at line 5791 of file set.c.

◆ SCIPsetSetFeastol()

SCIP_RETCODE SCIPsetSetFeastol	(	SCIP_SET *	set,
		SCIP_LP *	lp,
		SCIP_Real	feastol
	)

sets feasibility tolerance

Parameters

set	global SCIP settings
lp	LP data, or NULL
feastol	new feasibility tolerance

Definition at line 5810 of file set.c.

Referenced by SCIPchgFeastol().

◆ SCIPsetSetDualfeastol()

SCIP_RETCODE SCIPsetSetDualfeastol	(	SCIP_SET *	set,
		SCIP_Real	dualfeastol
	)

sets feasibility tolerance for reduced costs in LP solution

Parameters

set	global SCIP settings
dualfeastol	new reduced costs feasibility tolerance

Definition at line 5831 of file set.c.

Referenced by SCIPchgDualfeastol().

◆ SCIPsetSetBarrierconvtol()

SCIP_RETCODE SCIPsetSetBarrierconvtol	(	SCIP_SET *	set,
		SCIP_Real	barrierconvtol
	)

sets LP convergence tolerance used in barrier algorithm

Parameters

set	global SCIP settings
barrierconvtol	new convergence tolerance used in barrier algorithm

Definition at line 5844 of file set.c.

Referenced by SCIPchgBarrierconvtol().

◆ SCIPsetSetRelaxfeastol()

SCIP_Real SCIPsetSetRelaxfeastol	(	SCIP_SET *	set,
		SCIP_Real	relaxfeastol
	)

sets primal feasibility tolerance for relaxations (relaxfeastol)

Note: Set to SCIP_INVALID to apply relaxation-specific feasibility tolerance only.

Returns: Previous value of relaxfeastol.

Parameters

set	global SCIP settings
relaxfeastol	new primal feasibility tolerance for relaxations, or SCIP_INVALID

Definition at line 5862 of file set.c.

References NULL, and SCIP_Real.

Referenced by SCIPchgRelaxfeastol().

◆ SCIPsetSetLimitChanged()

void SCIPsetSetLimitChanged ( SCIP_SET * set )

marks that some limit parameter was changed

Parameters

set	global SCIP settings

Definition at line 5879 of file set.c.

Referenced by SCIPmarkLimitChanged().

◆ SCIPsetGetPriceMaxvars()

int SCIPsetGetPriceMaxvars	(	SCIP_SET *	set,
		SCIP_Bool	root
	)

returns the maximal number of variables priced into the LP per round

Parameters

set	global SCIP settings
root	are we at the root node?

Definition at line 5889 of file set.c.

Referenced by SCIPpriceLoop(), SCIPpricestoreAddProbVars(), and SCIPpricestoreAddVar().

◆ SCIPsetGetSepaMaxcutsGenFactor()

SCIP_Real SCIPsetGetSepaMaxcutsGenFactor	(	SCIP_SET *	set,
		SCIP_Bool	root
	)

returns factor for the maximal number of cuts that can be generated per round

Parameters

set	global SCIP settings
root	are we at the root node?

Definition at line 5903 of file set.c.

Referenced by cutpoolSeparate(), priceAndCutLoop(), separationRoundLP(), and separationRoundSol().

◆ SCIPsetGetSepaMaxcuts()

int SCIPsetGetSepaMaxcuts	(	SCIP_SET *	set,
		SCIP_Bool	root
	)

returns the maximal number of cuts separated per round

Parameters

set	global SCIP settings
root	are we at the root node?

Definition at line 5917 of file set.c.

Referenced by cutpoolSeparate(), priceAndCutLoop(), SCIPcutpoolSeparate(), SCIPsepastoreAddCut(), SCIPsepastoreApplyCuts(), separationRoundLP(), and separationRoundSol().

◆ SCIPsetGetSepaMaxCoefRatioRowprep()

SCIP_Real SCIPsetGetSepaMaxCoefRatioRowprep ( SCIP_SET * set )

returns the maximal ratio between coefficients to ensure in rowprep cleanup

Parameters

set	global SCIP settings

Definition at line 5931 of file set.c.

Referenced by SCIPcleanupRowprep(), and SCIPcleanupRowprep2().

◆ SCIPsetGetReferencevalue()

SCIP_Real SCIPsetGetReferencevalue ( SCIP_SET * set )

returns user defined objective value (in original space) for reference purposes

Parameters

set	global SCIP settings

Definition at line 5945 of file set.c.

Referenced by SCIPstatResetCurrentRun().

◆ SCIPsetGetDebugSolData()

SCIP_DEBUGSOLDATA * SCIPsetGetDebugSolData ( SCIP_SET * set )

returns debug solution data

Parameters

set	global SCIP settings

Definition at line 5956 of file set.c.

References NULL.

◆ SCIPsetInfinity()

SCIP_Real SCIPsetInfinity ( SCIP_SET * set )

returns value treated as infinity

Parameters

set	global SCIP settings

Definition at line 6064 of file set.c.

References NULL.

Referenced by addGlobalCut(), adjustedLb(), adjustedUb(), adjustLPobjval(), applyBounding(), collectDualInformation(), computeRelIntPoint(), conflictstoreEnsureMem(), createAndAddProofcons(), createReoptnode(), delPosConflict(), doBendersCreate(), domMerge(), executeUserDefinedSolvesub(), getMaxActivity(), getMinActivity(), initSolve(), lpSolve(), lpUpdateVarColumnProved(), lpUpdateVarLooseProved(), lpUpdateVarProved(), nlrowCalcActivityBounds(), nodeCreate(), parseValue(), priceAndCutLoop(), primalSetCutoffbound(), primalSetUpperbound(), propAndSolve(), provedBound(), reoptnodeReset(), resetSubproblemObjectiveValue(), rowCalcActivityBounds(), rowCalcIdxsAndVals(), rowCalcNorms(), rowScale(), saveConsLinear(), SCIPaggrRowGetMinActivity(), SCIPbendersActivate(), SCIPbendersExecSubproblemSolve(), SCIPbendersMergeSubproblemIntoMaster(), SCIPbranchExecExtern(), SCIPbranchGetBranchingPoint(), SCIPbranchGetScoreMultiple(), SCIPchgVarObjDive(), SCIPchgVarObjProbing(), SCIPcolGetFeasibility(), SCIPcolGetStrongbranch(), SCIPcolGetStrongbranches(), SCIPconcsolverSync(), SCIPconflictstoreTransform(), SCIPgetGap(), SCIPgetTransGap(), SCIPinfinity(), SCIPlpCreate(), SCIPlpGetGlobalPseudoObjval(), SCIPlpGetLooseObjval(), SCIPlpGetModifiedProvedPseudoObjval(), SCIPlpGetModifiedPseudoObjval(), SCIPlpGetObjval(), SCIPlpGetPseudoObjval(), SCIPlpGetUnboundedSol(), SCIPlpSolveAndEval(), SCIPlpSumRows(), SCIPnlpChgVarObjDive(), SCIPnlrowGetSolActivity(), SCIPnodeCutoff(), SCIPnodeFocus(), SCIPnodepqGetLowerbound(), SCIPnodeUpdateLowerbound(), SCIPpricerExec(), SCIPprimalHeuristics(), SCIPprimalSetCutoffbound(), SCIPprimalSetUpperbound(), SCIPprimalUpdateObjlimit(), SCIPprimalUpdateObjoffset(), SCIPprobExternObjval(), SCIPprobGetAbsMaxObjCoef(), SCIPprobGetAbsMinObjCoef(), SCIPprobGetObjlim(), SCIPprobInternObjval(), SCIPrelaxExec(), SCIPreoptApply(), SCIPreoptnodeInit(), SCIProwCreate(), SCIProwGetLPActivity(), SCIProwGetNLPFeasibility(), SCIProwGetPseudoActivity(), SCIProwGetRelaxFeasibility(), SCIProwGetSolActivity(), SCIPsolGetVal(), SCIPsolRecomputeObj(), SCIPsolRetransform(), SCIPsolSetVal(), SCIPsolveCIP(), SCIPstatGetDualReferenceIntegral(), SCIPstatGetPrimalDualIntegral(), SCIPstatGetPrimalReferenceIntegral(), SCIPstatResetCurrentRun(), SCIPstatResetPrimalDualIntegrals(), SCIPstoreSolutionGap(), SCIPtreeCalcNodeselPriority(), SCIPtreeCreateRoot(), SCIPtreeGetLowerboundNode(), SCIPvarAddVlb(), SCIPvarAddVub(), SCIPvarGetActiveRepresentatives(), SCIPvarGetLbLP(), SCIPvarGetMultaggrLbGlobal(), SCIPvarGetMultaggrLbLocal(), SCIPvarGetMultaggrUbGlobal(), SCIPvarGetMultaggrUbLocal(), SCIPvarGetProbvarSum(), SCIPvarGetRelaxSol(), SCIPvarGetUbLP(), SCIPvisualInit(), separateAlternativeProofs(), solveBendersSubproblems(), solveNode(), solveNodeLP(), solveNodeRelax(), tightenCoefficients(), tightenSingleVar(), transformDualredsToLinear(), tryAggregateIntVars(), varCreate(), varParse(), and varUpdateAggregationBounds().

◆ SCIPsetGetHugeValue()

SCIP_Real SCIPsetGetHugeValue ( SCIP_SET * set )

returns the minimum value that is regarded as huge and should be handled separately (e.g., in activity computation)

Parameters

set	global SCIP settings

Definition at line 6076 of file set.c.

References NULL.

Referenced by SCIPgetHugeValue(), SCIPvarTryAggregateVars(), and tryAggregateIntVars().

◆ SCIPsetEpsilon()

SCIP_Real SCIPsetEpsilon ( SCIP_SET * set )

returns value treated as zero

Parameters

set	global SCIP settings

Definition at line 6086 of file set.c.

Referenced by adjustedLb(), adjustedUb(), primalExistsSol(), SCIPbranchExecExtern(), SCIPbranchGetBranchingPoint(), SCIPepsilon(), SCIPgetGap(), SCIPgetTransGap(), SCIPprobScaleObj(), SCIPstoreSolutionGap(), SCIPtreeBranchVar(), SCIPtreeBranchVarNary(), SCIPtreeCalcNodeselPriority(), tryAggregateIntVars(), varEventObjChanged(), and varProcessChgBranchFactor().

◆ SCIPsetSumepsilon()

SCIP_Real SCIPsetSumepsilon ( SCIP_SET * set )

returns value treated as zero for sums of floating point values

Parameters

set	global SCIP settings

Definition at line 6096 of file set.c.

Referenced by rowCalcActivityBounds(), SCIPbranchGetScore(), SCIProwGetLPEfficacy(), SCIProwGetNLPEfficacy(), SCIProwGetRelaxEfficacy(), SCIProwGetSolEfficacy(), and SCIPsumepsilon().

◆ SCIPsetFeastol()

SCIP_Real SCIPsetFeastol ( SCIP_SET * set )

returns feasibility tolerance for constraints

Parameters

set	global SCIP settings

Definition at line 6106 of file set.c.

Referenced by branchcandCalcLPCands(), nlpCalcFracVars(), rowCalcActivityBounds(), SCIPfeastol(), SCIPlpResetFeastol(), SCIPvarTryAggregateVars(), and tryAggregateIntVars().

◆ SCIPsetDualfeastol()

SCIP_Real SCIPsetDualfeastol ( SCIP_SET * set )

returns feasibility tolerance for reduced costs

Parameters

set	global SCIP settings

Definition at line 6116 of file set.c.

Referenced by computeRelIntPoint(), lpSolveStable(), SCIPchgDualfeastol(), SCIPdualfeastol(), and SCIPlpCreate().

◆ SCIPsetLPFeastolFactor()

SCIP_Real SCIPsetLPFeastolFactor ( SCIP_SET * set )

returns factor w.r.t. primal feasibility tolerance that determines default (and maximal) feasibility tolerance

Parameters

set	global SCIP settings

Definition at line 6126 of file set.c.

Referenced by SCIPlpResetFeastol().

◆ SCIPsetBarrierconvtol()

SCIP_Real SCIPsetBarrierconvtol ( SCIP_SET * set )

returns convergence tolerance used in barrier algorithm

Parameters

set	global SCIP settings

Definition at line 6134 of file set.c.

Referenced by lpSolveStable(), SCIPbarrierconvtol(), SCIPchgBarrierconvtol(), and SCIPlpCreate().

◆ SCIPsetPseudocosteps()

SCIP_Real SCIPsetPseudocosteps ( SCIP_SET * set )

returns minimal variable distance value to use for pseudo cost updates

Parameters

set	global SCIP settings

Definition at line 6144 of file set.c.

Referenced by SCIPhistoryUpdatePseudocost().

◆ SCIPsetPseudocostdelta()

SCIP_Real SCIPsetPseudocostdelta ( SCIP_SET * set )

returns minimal minimal objective distance value to use for pseudo cost updates

Parameters

set	global SCIP settings

Definition at line 6154 of file set.c.

Referenced by SCIPhistoryUpdatePseudocost().

◆ SCIPsetCutoffbounddelta()

SCIP_Real SCIPsetCutoffbounddelta ( SCIP_SET * set )

return the delta to use for computing the cutoff bound for integral objectives

Parameters

set	global SCIP settings

Definition at line 6164 of file set.c.

Referenced by initSolve(), primalSetUpperbound(), SCIPconflictAnalyzePseudo(), SCIPconflictstoreAddDualsolcons(), SCIPconflictstoreCleanNewIncumbent(), SCIPcutoffbounddelta(), and SCIPgetDualProof().

◆ SCIPsetRelaxfeastol()

SCIP_Real SCIPsetRelaxfeastol ( SCIP_SET * set )

return the primal feasibility tolerance for relaxations

Parameters

set	global SCIP settings

Definition at line 6178 of file set.c.

Referenced by SCIPlpResetFeastol(), and SCIPrelaxfeastol().

◆ SCIPsetRecompfac()

SCIP_Real SCIPsetRecompfac ( SCIP_SET * set )

returns minimal decrease factor that causes the recomputation of a value (e.g., pseudo objective) instead of an update

Parameters

set	global SCIP settings

Definition at line 6189 of file set.c.

References NULL.

◆ SCIPsetIsInfinity()

SCIP_Bool SCIPsetIsInfinity	(	SCIP_SET *	set,
		SCIP_Real	val
	)

checks, if value is (positive) infinite

Parameters

set	global SCIP settings
val	value to be compared against infinity

Definition at line 6199 of file set.c.

Referenced by addBdchg(), addLocalRows(), addNode(), addRowToAggrRow(), addSideRemoval(), adjustedLb(), adjustedUb(), adjustLPobjval(), applyBounding(), branchcandCalcLPCands(), checkDualFeasibility(), checkLazyBounds(), checkLazyColArray(), computeLPBounds(), computeRelIntPoint(), createAndAddProofcons(), delPosConflict(), displayRelevantStats(), executeUserDefinedSolvesub(), getGap(), getMaxActivity(), getMinActivity(), getObjvalDeltaLb(), getObjvalDeltaObj(), getObjvalDeltaUb(), initSolve(), isPseudocostUpdateValid(), lpFlushAddRows(), lpFlushChgCols(), lpFlushChgRows(), lpLexDualSimplex(), lpSetObjlim(), lpSolve(), lpSolveStable(), lpUpdateVarColumn(), lpUpdateVarColumnProved(), lpUpdateVarLoose(), lpUpdateVarLooseProved(), lpUpdateVarProved(), nlpFlushNlRowAdditions(), nlpSolve(), nlpUpdateVarBounds(), nlrowAddToStat(), nlrowConstantChanged(), nlrowSideChanged(), nodeAssignParent(), nodeToLeaf(), primalAddSol(), primalSetUpperbound(), printBounds(), proofsetCancelVarWithBound(), propagateLongProof(), recomputeGlbPseudoObjectiveValue(), recomputeLooseObjectiveValue(), recomputePseudoObjectiveValue(), rowCalcActivityBounds(), rowScale(), saveConsBounddisjuction(), saveConsLinear(), SCIP_DECL_HASHKEYEQ(), SCIP_DECL_HASHKEYVAL(), SCIPaggrRowGetMinActivity(), SCIPbranchExecExtern(), SCIPbranchGetBranchingPoint(), SCIPbranchruleExecExternSol(), SCIPbranchruleExecLPSol(), SCIPbranchruleExecPseudoSol(), SCIPcliquetableAdd(), SCIPconcsolverSync(), SCIPconflictAnalyzePseudo(), SCIPconflictstoreAddConflict(), SCIPconflictstoreCleanNewIncumbent(), SCIPcutpoolAddRow(), SCIPcutpoolIsCutNew(), SCIPexprEvalActivity(), SCIPgetDualboundRoot(), SCIPgetGap(), SCIPgetLowerboundRoot(), SCIPgetTransGap(), SCIPhistoryUpdatePseudocost(), SCIPisInfinity(), SCIPlpAddCol(), SCIPlpComputeRelIntPoint(), SCIPlpGetDualfarkas(), SCIPlpGetGlobalPseudoObjval(), SCIPlpGetModifiedProvedPseudoObjval(), SCIPlpGetModifiedPseudoObjval(), SCIPlpGetObjval(), SCIPlpGetPrimalRay(), SCIPlpGetPseudoObjval(), SCIPlpGetSol(), SCIPlpGetUnboundedSol(), SCIPlpIsFeasEQ(), SCIPlpIsFeasGE(), SCIPlpIsFeasGT(), SCIPlpIsFeasLE(), SCIPlpIsFeasLT(), SCIPlpMarkFlushed(), SCIPlpRecomputeLocalAndGlobalPseudoObjval(), SCIPlpSetCutoffbound(), SCIPlpSumRows(), SCIPlpWriteMip(), SCIPnlrowCreate(), SCIPnlrowIsRedundant(), SCIPnodeAddBoundinfer(), SCIPnodeFocus(), SCIPnodepqBound(), SCIPprimalTransformSol(), SCIPprintReal(), SCIPprintRootStatistics(), SCIPprintSolutionStatistics(), SCIPprobExternObjval(), SCIPprobInternObjval(), SCIPrelaxExec(), SCIProwAddConstant(), SCIProwCalcIntegralScalar(), SCIProwChgConstant(), SCIProwGetSolActivity(), SCIProwIsRedundant(), SCIPsepastoreAddCut(), SCIPsolAdjustImplicitSolVals(), SCIPsolCheck(), SCIPsolGetRayVal(), SCIPsolGetVal(), SCIPsolIncVal(), SCIPsolLinkLPSol(), SCIPsolPrint(), SCIPsolPrintRay(), SCIPsolRecomputeObj(), SCIPsolRetransform(), SCIPsolsAreEqual(), SCIPsolSetVal(), SCIPsolveCIP(), SCIPstatResetCurrentRun(), SCIPstatUpdatePrimalDualIntegrals(), SCIPtreeBranchVar(), SCIPtreeBranchVarNary(), SCIPtreeCutoff(), SCIPupdateVarPseudocost(), SCIPvarAddToRow(), SCIPvarAddVlb(), SCIPvarAddVub(), SCIPvarChgLbDive(), SCIPvarChgLbGlobal(), SCIPvarChgLbLocal(), SCIPvarChgUbDive(), SCIPvarChgUbGlobal(), SCIPvarChgUbLocal(), SCIPvarFix(), SCIPvarGetActiveRepresentatives(), SCIPvarGetLbLP(), SCIPvarGetMultaggrLbGlobal(), SCIPvarGetMultaggrLbLocal(), SCIPvarGetMultaggrUbGlobal(), SCIPvarGetMultaggrUbLocal(), SCIPvarGetProbvarSum(), SCIPvarGetRelaxSol(), SCIPvarGetUbLP(), SCIPvarNegate(), SCIPvarPrint(), SCIPvisualLowerbound(), sepastoreApplyBdchg(), sepastoreApplyLb(), sepastoreApplyUb(), sepastoreIsBdchgApplicable(), sepastoreIsCutRedundant(), sepastoreIsCutRedundantOrInfeasible(), solIncArrayVal(), solnodeAddChild(), solOfInterest(), solSetArrayVal(), solveBendersSubproblems(), solveNode(), storeCuts(), tightenDualproof(), updateEstimate(), updateLazyBounds(), updatePseudocost(), varParse(), varProcessChgLbGlobal(), varProcessChgLbLocal(), varProcessChgUbGlobal(), varProcessChgUbLocal(), and varUpdateAggregationBounds().

◆ SCIPsetIsHugeValue()

SCIP_Bool SCIPsetIsHugeValue	(	SCIP_SET *	set,
		SCIP_Real	val
	)

checks, if value is huge and should be handled separately (e.g., in activity computation)

Parameters

set	global SCIP settings
val	value to be checked whether it is huge

Definition at line 6210 of file set.c.

Referenced by SCIPisHugeValue().

◆ SCIPsetIsEQ()

SCIP_Bool SCIPsetIsEQ	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if values are in range of epsilon

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 6221 of file set.c.

Referenced by addBdchg(), addGlobalCut(), colChgCoefPos(), computeRelIntPoint(), conflictAnalyzeLP(), detectImpliedBounds(), domMerge(), getGap(), getObjvalDeltaObj(), isPseudocostUpdateValid(), nlpFlushNlRowAdditions(), nlrowChgLinearCoefPos(), primalSearchSolPos(), propagateLongProof(), reoptSaveNewObj(), rowChgCoefPos(), rowScale(), SCIPbranchcandAddExternCand(), SCIPbranchExecExtern(), SCIPbranchExecLP(), SCIPbranchExecPseudo(), SCIPbranchGetBranchingPoint(), SCIPbranchVar(), SCIPbranchVarVal(), SCIPbranchVarValNary(), SCIPcolChgCoef(), SCIPcolChgLb(), SCIPcolChgObj(), SCIPcolChgUb(), SCIPcolDelCoef(), SCIPcolGetFeasibility(), SCIPcolIncCoef(), SCIPdomchgAddBoundchg(), SCIPeventqueueAdd(), SCIPfixVarProbing(), SCIPgetDualSolVal(), SCIPinferBinvarCons(), SCIPinferBinvarProp(), SCIPisEQ(), SCIPlpEndDive(), SCIPlpGetDualDegeneracy(), SCIPlpUpdateVarLb(), SCIPlpUpdateVarLbGlobal(), SCIPlpUpdateVarObj(), SCIPlpUpdateVarUb(), SCIPlpUpdateVarUbGlobal(), SCIPlpWriteMip(), SCIPmergeVariableStatistics(), SCIPnlrowChgConstant(), SCIPnlrowChgLhs(), SCIPnlrowChgRhs(), SCIPnodeAddHoleinfer(), SCIPnodeCutoff(), SCIPnodeUpdateLowerbound(), SCIPprimalTransformSol(), SCIPprimalUpperboundIsSol(), SCIPprobScaleObj(), SCIPreoptAddDualBndchg(), SCIProwChgCoef(), SCIProwChgConstant(), SCIProwChgLhs(), SCIProwChgRhs(), SCIProwDelCoef(), SCIProwIncCoef(), SCIPsolsAreEqual(), SCIPtightenVarLbGlobal(), SCIPtightenVarUbGlobal(), SCIPtreeBranchVar(), SCIPundoBdchgsProof(), SCIPvarAddHoleGlobal(), SCIPvarAddHoleLocal(), SCIPvarAddHoleOriginal(), SCIPvarAddImplic(), SCIPvarAddObj(), SCIPvarAddToRow(), SCIPvarAddVlb(), SCIPvarAddVub(), SCIPvarAggregate(), SCIPvarChgBranchFactor(), SCIPvarChgLbGlobal(), SCIPvarChgLbLocal(), SCIPvarChgLbOriginal(), SCIPvarChgObj(), SCIPvarChgUbGlobal(), SCIPvarChgUbLocal(), SCIPvarChgUbOriginal(), SCIPvarFix(), SCIPvarGetActiveRepresentatives(), SCIPvarMultiaggregate(), SCIPvarSetNLPSol(), SCIPvarSetRelaxSol(), SCIPvarTransform(), solnodeAddChild(), tightenBounds(), tightenDualproof(), transformDualredsToLinear(), treeAddPendingBdchg(), varAddImplic(), varAddLbchginfo(), varAddUbchginfo(), varCreate(), varEventGlbChanged(), varEventGubChanged(), varEventLbChanged(), varEventObjChanged(), varEventUbChanged(), varProcessAddHoleGlobal(), varProcessAddHoleLocal(), varProcessChgBranchFactor(), varProcessChgLbGlobal(), varProcessChgLbLocal(), varProcessChgUbGlobal(), varProcessChgUbLocal(), and varUpdateAggregationBounds().

◆ SCIPsetIsLT()

SCIP_Bool SCIPsetIsLT	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if val1 is (more than epsilon) lower than val2

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 6239 of file set.c.

Referenced by addSplitcons(), changeAncestorBranchings(), conflictAddBound(), conflictAnalyzeLP(), domMerge(), fixBounds(), fixInterdiction(), holelistCreate(), initSolve(), isPseudocostUpdateValid(), lpUpdateObjNorms(), nodeToLeaf(), priceAndCutLoop(), primalExistsOrigSol(), primalExistsSol(), reoptCheckLocalRestart(), rowAddNorms(), rowCalcIdxsAndVals(), SCIPboundchgApply(), SCIPbranchcandGetPseudoCands(), SCIPbranchcandUpdateVar(), SCIPbranchExecExtern(), SCIPconflictAddRelaxedBound(), SCIPfixVarProbing(), SCIPisLT(), SCIPlpSolveAndEval(), SCIPnodeAddBoundinfer(), SCIPnodeAddHoleinfer(), SCIPnodeFocus(), SCIPnodepqBound(), SCIPpriceLoop(), SCIPprobGetAbsMinObjCoef(), SCIPreoptAddDualBndchg(), SCIPsolCheck(), SCIPsolveIsStopped(), SCIPstatUpdateMemsaveMode(), SCIPtreeBranchVar(), SCIPtreeBranchVarHole(), SCIPtreeBranchVarNary(), SCIPtreeGetLowerboundNode(), SCIPundoBdchgsProof(), SCIPvarAddHoleGlobal(), SCIPvarAddHoleLocal(), SCIPvarAddHoleOriginal(), SCIPvarAddVlb(), SCIPvarAddVub(), SCIPvarGetConflictingBdchgDepth(), sepastoreApplyUb(), sepastoreIsBdchgApplicable(), solnodeAddChild(), solveNode(), tightenSingleVar(), treeApplyPendingBdchgs(), updateLazyBounds(), varAddImplic(), varAddLbchginfo(), varEventGholeAdded(), varParse(), varProcessAddHoleGlobal(), varProcessAddHoleLocal(), and varUpdateAggregationBounds().

◆ SCIPsetIsLE()

SCIP_Bool SCIPsetIsLE	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if val1 is not (more than epsilon) greater than val2

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 6257 of file set.c.

Referenced by addLocalRows(), addSplitcons(), checkRedundancy(), computeLPBounds(), conflictAddBound(), conflictAddConflictBound(), conflictQueueBound(), createAndAddProofcons(), detectImpliedBounds(), domMerge(), getGap(), lpSolve(), priceAndCutLoop(), primalExistsOrigSol(), primalExistsSol(), primalSetCutoffbound(), propagateLongProof(), rowAddNorms(), rowCalcIdxsAndVals(), rowDelNorms(), SCIPbendersExec(), SCIPboundchgApply(), SCIPbranchcandGetPseudoCands(), SCIPbranchGetBranchingPoint(), SCIPbranchruleExecExternSol(), SCIPbranchruleExecLPSol(), SCIPbranchruleExecPseudoSol(), SCIPconflictAddRelaxedBound(), SCIPconflictstoreCleanNewIncumbent(), SCIPinferBinvarCons(), SCIPinferBinvarProp(), SCIPinferVarLbCons(), SCIPinferVarLbProp(), SCIPinferVarUbCons(), SCIPinferVarUbProp(), SCIPisLE(), SCIPlpGetDualDegeneracy(), SCIPnodeAddBoundinfer(), SCIPnodeAddHoleinfer(), SCIPpriceLoop(), SCIPprimalAddOrigObjoffset(), SCIPprimalAddSol(), SCIPreoptnodeAddCons(), SCIPsepaExecLP(), SCIPsetIsLbBetter(), SCIPsetIsUbBetter(), SCIPsolCheck(), SCIPsolveIsStopped(), SCIPtightenVarLb(), SCIPtightenVarLbGlobal(), SCIPtightenVarUb(), SCIPtightenVarUbGlobal(), SCIPtreeBranchVarHole(), SCIPtreeGetLowerboundNode(), SCIPvarAddHoleGlobal(), SCIPvarAddHoleLocal(), SCIPvarAddHoleOriginal(), SCIPvarChgLbOriginal(), SCIPvarGetConflictingBdchgDepth(), sepastoreIsCutRedundant(), sepastoreIsCutRedundantOrInfeasible(), tightenSingleVar(), varAddVbound(), varProcessAddHoleGlobal(), varProcessAddHoleLocal(), varProcessChgLbGlobal(), and varProcessChgLbLocal().

◆ SCIPsetIsGT()

SCIP_Bool SCIPsetIsGT	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if val1 is (more than epsilon) greater than val2

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 6275 of file set.c.

Referenced by addCand(), addCurrentSolution(), addLocalRows(), addSplitcons(), changeAncestorBranchings(), conflictAddBound(), conflictAnalyzeLP(), createAndAddProofcons(), domMerge(), enforceConstraints(), fixBounds(), fixInterdiction(), initLP(), isPseudocostUpdateValid(), performInteriorSolCutStrengthening(), primalExistsOrigSol(), primalExistsSol(), rowAddNorms(), rowCalcIdxsAndVals(), SCIPboundchgApply(), SCIPconflictAddRelaxedBound(), SCIPconflictstoreCleanNewIncumbent(), SCIPfixVarProbing(), SCIPisGT(), SCIPnodeAddBoundinfer(), SCIPprobGetAbsMaxObjCoef(), SCIPreoptApply(), SCIPreoptMergeVarHistory(), SCIPsolCheck(), SCIPsolveCIP(), SCIPtreeBranchVar(), SCIPtreeBranchVarHole(), SCIPtreeBranchVarNary(), SCIPundoBdchgsProof(), SCIPvarAddVlb(), SCIPvarAddVub(), SCIPvarGetConflictingBdchgDepth(), SCIPvisualLowerbound(), sepastoreApplyLb(), sepastoreIsBdchgApplicable(), solveNode(), tightenSingleVar(), treeApplyPendingBdchgs(), updateAuxiliaryVarLowerbound(), updateLazyBounds(), varAddImplic(), varAddUbchginfo(), varParse(), and varUpdateAggregationBounds().

◆ SCIPsetIsGE()

SCIP_Bool SCIPsetIsGE	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if val1 is not (more than epsilon) lower than val2

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 6293 of file set.c.

Referenced by addSplitcons(), analyzeStrongbranch(), applyBounding(), branchcandCalcLPCands(), checkRedundancy(), computeLPBounds(), conflictAddBound(), conflictAddConflictBound(), conflictQueueBound(), conflictstoreCleanUpStorage(), detectImpliedBounds(), domMerge(), getGap(), holelistDuplicate(), lpSolve(), lpUpdateObjNorms(), nlpCalcFracVars(), nodeToLeaf(), priceAndCutLoop(), primalExistsOrigSol(), primalExistsSol(), propagateLongProof(), rowAddNorms(), rowCalcIdxsAndVals(), rowDelNorms(), SCIPboundchgApply(), SCIPbranchcandUpdateVar(), SCIPbranchGetBranchingPoint(), SCIPbranchruleExecExternSol(), SCIPbranchruleExecLPSol(), SCIPbranchruleExecPseudoSol(), SCIPconcsolverSync(), SCIPconflictAddRelaxedBound(), SCIPconflictAnalyzeStrongbranch(), SCIPconflictstoreAddDualraycons(), SCIPconflictstoreAddDualsolcons(), SCIPconflictstoreCleanNewIncumbent(), SCIPgetVarStrongbranchFrac(), SCIPgetVarStrongbranchInt(), SCIPinferVarUbCons(), SCIPinferVarUbProp(), SCIPisGE(), SCIPlpGetDualDegeneracy(), SCIPlpGetDualfarkas(), SCIPlpRecalculateObjSqrNorm(), SCIPlpSolveAndEval(), SCIPnodeAddHoleinfer(), SCIPnodeFocus(), SCIPnodepqBound(), SCIPreoptGetSolveLP(), SCIPreoptnodeAddCons(), SCIPsolCheck(), SCIPsolveCIP(), SCIPstatUpdatePrimalDualIntegrals(), SCIPtightenVarUb(), SCIPtreeBranchVarHole(), SCIPtreeCutoff(), SCIPvarAddHoleGlobal(), SCIPvarAddHoleLocal(), SCIPvarAddHoleOriginal(), SCIPvarChgUbOriginal(), SCIPvarGetConflictingBdchgDepth(), tightenSingleVar(), varAddVbound(), varProcessAddHoleGlobal(), varProcessAddHoleLocal(), varProcessChgUbGlobal(), and varProcessChgUbLocal().

◆ SCIPsetIsZero()

SCIP_Bool SCIPsetIsZero	(	SCIP_SET *	set,
		SCIP_Real	val
	)

checks, if value is in range epsilon of 0.0

Parameters

set	global SCIP settings
val	value to process

Definition at line 6311 of file set.c.

Referenced by addBoundViolated(), addCand(), colAddCoef(), colChgCoefPos(), colLink(), computeRelIntPoint(), createAndAddProofcons(), cutpoolSeparate(), detectImpliedBounds(), incVSIDS(), initSolve(), isNewValueUnreliable(), lpCleanupCols(), lpRemoveObsoleteCols(), nlpFlushObjective(), nlpFlushVarAdditions(), nlrowChgLinearCoefPos(), nlrowRemoveFixedLinearCoefPos(), priceAndCutLoop(), propagateLongProof(), reoptSimilarity(), rowAddCoef(), rowAddNorms(), rowCalcIdxsAndVals(), rowCalcNorms(), rowChgCoefPos(), rowDelNorms(), rowLink(), rowMerge(), rowScale(), saveConsBounddisjuction(), saveConsLinear(), SCIPaggregateVars(), SCIPcolChgLb(), SCIPcolChgObj(), SCIPcolChgUb(), SCIPcolCreate(), SCIPcolIncCoef(), SCIPconflictAnalyzePseudo(), SCIPisZero(), SCIPlpAddRow(), SCIPlpGetDualDegeneracy(), SCIPlpGetModifiedProvedPseudoObjval(), SCIPlpGetModifiedPseudoObjval(), SCIPlpGetUnboundedSol(), SCIPlpSumRows(), SCIPnlrowChgLinearCoef(), SCIPprobAddVar(), SCIPprobCheckObjIntegral(), SCIPprobGetAbsMaxObjCoef(), SCIPprobGetAbsMinObjCoef(), SCIPprobGetNObjVars(), SCIPprobPrintPseudoSol(), SCIPprobScaleObj(), SCIPprobUpdateNObjVars(), SCIPreoptMergeVarHistory(), SCIProwAddConstant(), SCIProwCalcIntegralScalar(), SCIProwCreate(), SCIProwIncCoef(), SCIPsolAdjustImplicitSolVals(), SCIPsolIncVal(), SCIPsolPrint(), SCIPsolPrintRay(), SCIPsolSetVal(), SCIPstatUpdatePrimalDualIntegrals(), SCIPtreeBranchVarNary(), SCIPundoBdchgsProof(), SCIPvarAddImplic(), SCIPvarAddObj(), SCIPvarAddToRow(), SCIPvarAddVlb(), SCIPvarAddVub(), SCIPvarAggregate(), SCIPvarChgLbOriginal(), SCIPvarChgObjDive(), SCIPvarChgUbOriginal(), SCIPvarFix(), SCIPvarGetActiveRepresentatives(), SCIPvarIncVSIDS(), SCIPvarMultiaggregate(), SCIPvarPrint(), SCIPvarRemoveCliquesImplicsVbs(), SCIPvarSetNLPSol(), SCIPvarSetRelaxSol(), SCIPvarTryAggregateVars(), SCIPvarUpdatePseudocost(), SCIPvboundsAdd(), separationRoundLP(), separationRoundSol(), sepastoreApplyBdchg(), sepastoreIsBdchgApplicable(), storeCuts(), tightenDualproof(), tryAggregateIntVars(), varAddImplic(), varAddTransitiveImplic(), varProcessChgLbGlobal(), varProcessChgLbLocal(), varProcessChgUbLocal(), and varUpdateAggregationBounds().

◆ SCIPsetIsPositive()

SCIP_Bool SCIPsetIsPositive	(	SCIP_SET *	set,
		SCIP_Real	val
	)

checks, if value is greater than epsilon

Parameters

set	global SCIP settings
val	value to process

Definition at line 6322 of file set.c.

Referenced by addBoundViolated(), createAndAddProofcons(), getObjvalDeltaLb(), getObjvalDeltaObj(), lpUpdateVarColumn(), lpUpdateVarLoose(), recomputeGlbPseudoObjectiveValue(), recomputeLooseObjectiveValue(), recomputePseudoObjectiveValue(), rowScale(), SCIPbranchGetBranchingPoint(), SCIPcolGetFeasibility(), SCIPconflictstoreCleanNewIncumbent(), SCIPexprComputeQuadraticCurvature(), SCIPhistoryUpdatePseudocost(), SCIPisPositive(), SCIPlpGetUnboundedSol(), SCIPlpRecomputeLocalAndGlobalPseudoObjval(), SCIPlpUpdateVarLb(), SCIPlpUpdateVarLbGlobal(), SCIPpricestoreAddBdviolvar(), SCIPpricestoreAddProbVars(), SCIProwCalcIntegralScalar(), SCIProwGetObjParallelism(), SCIPsolAdjustImplicitSolVals(), SCIPsolveIsStopped(), SCIPtreeBranchVarNary(), SCIPundoBdchgsProof(), SCIPvarAddHoleGlobal(), SCIPvarAddHoleLocal(), SCIPvarAddVlb(), SCIPvarAddVub(), SCIPvarChgLbDive(), SCIPvarChgLbGlobal(), SCIPvarChgLbLocal(), SCIPvarChgUbDive(), SCIPvarChgUbGlobal(), SCIPvarChgUbLocal(), separateAlternativeProofs(), varProcessAddHoleGlobal(), varProcessAddHoleLocal(), varProcessChgLbGlobal(), varProcessChgLbLocal(), varProcessChgUbGlobal(), and varProcessChgUbLocal().

◆ SCIPsetIsNegative()

SCIP_Bool SCIPsetIsNegative	(	SCIP_SET *	set,
		SCIP_Real	val
	)

checks, if value is lower than -epsilon

Parameters

set	global SCIP settings
val	value to process

Definition at line 6333 of file set.c.

Referenced by addBoundViolated(), createAndAddProofcons(), cutpoolSeparate(), getObjvalDeltaObj(), getObjvalDeltaUb(), lpUpdateVarColumn(), lpUpdateVarColumnProved(), lpUpdateVarLoose(), lpUpdateVarLooseProved(), recomputeGlbPseudoObjectiveValue(), recomputeLooseObjectiveValue(), recomputePseudoObjectiveValue(), saveConsBounddisjuction(), SCIPbranchGetBranchingPoint(), SCIPcolGetFeasibility(), SCIPconflictstoreCleanNewIncumbent(), SCIPexprComputeQuadraticCurvature(), SCIPhistoryUpdatePseudocost(), SCIPisNegative(), SCIPlpGetUnboundedSol(), SCIPlpRecomputeLocalAndGlobalPseudoObjval(), SCIPlpUpdateVarUb(), SCIPlpUpdateVarUbGlobal(), SCIPpricestoreAddBdviolvar(), SCIPpricestoreAddProbVars(), SCIPsolAdjustImplicitSolVals(), SCIPsolveIsStopped(), SCIPundoBdchgsProof(), SCIPvarAddHoleGlobal(), SCIPvarAddHoleLocal(), SCIPvarAddVlb(), SCIPvarAddVub(), SCIPvarChgLbDive(), SCIPvarChgLbGlobal(), SCIPvarChgLbLocal(), SCIPvarChgUbDive(), SCIPvarChgUbGlobal(), SCIPvarChgUbLocal(), separationRoundLP(), separationRoundSol(), varProcessAddHoleGlobal(), varProcessAddHoleLocal(), varProcessChgLbGlobal(), varProcessChgLbLocal(), varProcessChgUbGlobal(), and varProcessChgUbLocal().

◆ SCIPsetIsIntegral()

SCIP_Bool SCIPsetIsIntegral	(	SCIP_SET *	set,
		SCIP_Real	val
	)

checks, if value is integral within epsilon

Parameters

set	global SCIP settings
val	value to process

Definition at line 6344 of file set.c.

Referenced by addGlobalCut(), checkRedundancy(), colAddCoef(), colChgCoefPos(), conflictAddConflictCons(), conflictCreateReconvergenceConss(), detectImpliedBounds(), lpLexDualSimplex(), rowAddCoef(), rowChgCoefPos(), rowMerge(), rowScale(), SCIPbranchGetBranchingPoint(), SCIPcolGetStrongbranch(), SCIPisIntegral(), SCIPprobAddVar(), SCIPprobCheckObjIntegral(), SCIPprobTransform(), SCIProwCreate(), SCIPsepaExecLP(), SCIPsepaExecSol(), SCIPvarFix(), tightenSingleVar(), varProcessChgLbLocal(), and varProcessChgUbLocal().

◆ SCIPsetIsScalingIntegral()

SCIP_Bool SCIPsetIsScalingIntegral	(	SCIP_SET *	set,
		SCIP_Real	val,
		SCIP_Real	scalar
	)

checks whether the product val * scalar is integral in epsilon scaled by scalar

Parameters

set	global SCIP settings
val	unscaled value to check for scaled integrality
scalar	value to scale val with for checking for integrality

Definition at line 6355 of file set.c.

Referenced by SCIPisScalingIntegral().

◆ SCIPsetIsFracIntegral()

SCIP_Bool SCIPsetIsFracIntegral	(	SCIP_SET *	set,
		SCIP_Real	val
	)

checks, if given fractional part is smaller than epsilon

Parameters

set	global SCIP settings
val	value to process

Definition at line 6373 of file set.c.

Referenced by SCIPisFracIntegral().

◆ SCIPsetFloor()

SCIP_Real SCIPsetFloor	(	SCIP_SET *	set,
		SCIP_Real	val
	)

rounds value + feasibility tolerance down to the next integer in epsilon tolerance

Parameters

set	global SCIP settings
val	value to process

Definition at line 6386 of file set.c.

Referenced by SCIPbranchcandAddExternCand(), SCIPbranchGetBranchingPoint(), SCIPexprEvalActivity(), SCIPfloor(), SCIPsolAdjustImplicitSolVals(), SCIPtreeBranchVarNary(), SCIPvarAddVlb(), SCIPvarCalcPscostConfidenceBound(), and SCIPvarGetMinPseudocostScore().

◆ SCIPsetCeil()

SCIP_Real SCIPsetCeil	(	SCIP_SET *	set,
		SCIP_Real	val
	)

rounds value - feasibility tolerance up to the next integer in epsilon tolerance

Parameters

set	global SCIP settings
val	value to process

Definition at line 6397 of file set.c.

Referenced by cutpoolSeparate(), numSubproblemsToCheck(), paramsetSetHeuristicsAggressive(), SCIPbranchcandAddExternCand(), SCIPceil(), SCIPexprEvalActivity(), SCIPsolAdjustImplicitSolVals(), SCIPtreeBranchVar(), SCIPtreeBranchVarNary(), SCIPvarAddVlb(), SCIPvarGetMinPseudocostScore(), separationRoundLP(), and separationRoundSol().

◆ SCIPsetRound()

SCIP_Real SCIPsetRound	(	SCIP_SET *	set,
		SCIP_Real	val
	)

rounds value to the nearest integer in epsilon tolerance

Parameters

set	global SCIP settings
val	value to process

Definition at line 6408 of file set.c.

Referenced by addGlobalCut(), colAddCoef(), colChgCoefPos(), rowAddCoef(), rowChgCoefPos(), rowMerge(), SCIPbranchGetBranchingPoint(), SCIPround(), SCIProwCreate(), and SCIPvarFix().

◆ SCIPsetFrac()

SCIP_Real SCIPsetFrac	(	SCIP_SET *	set,
		SCIP_Real	val
	)

returns fractional part of value, i.e. x - floor(x) in epsilon tolerance

Parameters

set	global SCIP settings
val	value to return fractional part for

Definition at line 6419 of file set.c.

Referenced by SCIPexprPrintDot(), and SCIPfrac().

◆ SCIPsetIsSumEQ()

SCIP_Bool SCIPsetIsSumEQ	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if values are in range of sumepsilon

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 6430 of file set.c.

Referenced by lpFlushChgRows(), SCIPisSumEQ(), and SCIPlpMarkFlushed().

◆ SCIPsetIsSumLT()

SCIP_Bool SCIPsetIsSumLT	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if val1 is (more than sumepsilon) lower than val2

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 6448 of file set.c.

Referenced by SCIPisSumLT().

◆ SCIPsetIsSumLE()

SCIP_Bool SCIPsetIsSumLE	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if val1 is not (more than sumepsilon) greater than val2

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 6466 of file set.c.

Referenced by SCIPisSumLE(), and SCIProwGetObjParallelism().

◆ SCIPsetIsSumGT()

SCIP_Bool SCIPsetIsSumGT	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if val1 is (more than sumepsilon) greater than val2

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 6484 of file set.c.

Referenced by SCIPisSumGT().

◆ SCIPsetIsSumGE()

SCIP_Bool SCIPsetIsSumGE	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if val1 is not (more than sumepsilon) lower than val2

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 6502 of file set.c.

Referenced by SCIPisSumGE(), and SCIProwGetObjParallelism().

◆ SCIPsetIsSumZero()

SCIP_Bool SCIPsetIsSumZero	(	SCIP_SET *	set,
		SCIP_Real	val
	)

checks, if value is in range sumepsilon of 0.0

Parameters

set	global SCIP settings
val	value to process

Definition at line 6520 of file set.c.

Referenced by SCIPisSumZero(), and SCIProwGetLPSolCutoffDistance().

◆ SCIPsetIsSumPositive()

SCIP_Bool SCIPsetIsSumPositive	(	SCIP_SET *	set,
		SCIP_Real	val
	)

checks, if value is greater than sumepsilon

Parameters

set	global SCIP settings
val	value to process

Definition at line 6531 of file set.c.

Referenced by SCIPisSumPositive().

◆ SCIPsetIsSumNegative()

SCIP_Bool SCIPsetIsSumNegative	(	SCIP_SET *	set,
		SCIP_Real	val
	)

checks, if value is lower than -sumepsilon

Parameters

set	global SCIP settings
val	value to process

Definition at line 6542 of file set.c.

Referenced by SCIPisSumNegative().

◆ SCIPsetSumFloor()

SCIP_Real SCIPsetSumFloor	(	SCIP_SET *	set,
		SCIP_Real	val
	)

rounds value + sumepsilon tolerance down to the next integer

Parameters

set	global SCIP settings
val	value to process

Definition at line 6553 of file set.c.

Referenced by rowScale().

◆ SCIPsetSumCeil()

SCIP_Real SCIPsetSumCeil	(	SCIP_SET *	set,
		SCIP_Real	val
	)

rounds value - sumepsilon tolerance up to the next integer

Parameters

set	global SCIP settings
val	value to process

Definition at line 6564 of file set.c.

Referenced by rowScale().

◆ SCIPsetSumRound()

SCIP_Real SCIPsetSumRound	(	SCIP_SET *	set,
		SCIP_Real	val
	)

rounds value to the nearest integer in sumepsilon tolerance

Parameters

set	global SCIP settings
val	value to process

Definition at line 6575 of file set.c.

◆ SCIPsetSumFrac()

SCIP_Real SCIPsetSumFrac	(	SCIP_SET *	set,
		SCIP_Real	val
	)

returns fractional part of value, i.e. x - floor(x) in sumepsilon tolerance

Parameters

set	global SCIP settings
val	value to process

Definition at line 6586 of file set.c.

◆ SCIPsetIsFeasEQ()

SCIP_Bool SCIPsetIsFeasEQ	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if relative difference of values is in range of feastol

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 6597 of file set.c.

Referenced by addSplitcons(), computeRelIntPoint(), detectImpliedBounds(), dryBranch(), fixBounds(), getImplVarRedcost(), lpFlushChgCols(), lpLexDualSimplex(), SCIP_DECL_HASHKEYEQ(), SCIPboundchgUndo(), SCIPconflictAnalyzePseudo(), SCIPfixVar(), SCIPisFeasEQ(), SCIPlpStartDive(), SCIPprobUpdateBestRootSol(), SCIPreoptApplyGlbConss(), SCIPtreeBranchVar(), SCIPvarChgLbGlobal(), SCIPvarChgLbLocal(), SCIPvarChgUbGlobal(), SCIPvarChgUbLocal(), SCIPvarFix(), SCIPvarGetImplRedcost(), SCIPvarPscostThresholdProbabilityTest(), SCIPvarSignificantPscostDifference(), solveNode(), varAddImplic(), varProcessChgLbGlobal(), varProcessChgLbLocal(), varProcessChgUbGlobal(), and varProcessChgUbLocal().

◆ SCIPsetIsFeasLT()

SCIP_Bool SCIPsetIsFeasLT	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if relative difference of val1 and val2 is lower than feastol

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 6619 of file set.c.

Referenced by applyImplic(), boundchgApplyGlobal(), checkImplic(), computeRelIntPoint(), detectImpliedBounds(), enforceConstraints(), reoptCheckLocalRestart(), reoptSimilarity(), SCIPaddReoptDualBndchg(), SCIPcutpoolAddRow(), SCIPcutpoolIsCutNew(), SCIPfixVar(), SCIPimplicsAdd(), SCIPinferVarUbCons(), SCIPinferVarUbProp(), SCIPisFeasLT(), SCIPnlrowIsRedundant(), SCIPnodePropagateImplics(), SCIPreoptCheckRestart(), SCIProwIsRedundant(), SCIPsolAdjustImplicitSolVals(), SCIPsolCheck(), SCIPsolCheckOrig(), SCIPtightenVarUb(), SCIPtightenVarUbGlobal(), SCIPvarAddVlb(), SCIPvarAddVub(), SCIPvarChgUbGlobal(), SCIPvarChgUbLocal(), SCIPvarFix(), SCIPvarGetImplRedcost(), SCIPvarPscostThresholdProbabilityTest(), SCIPvarRemoveCliquesImplicsVbs(), and sepastoreIsBdchgApplicable().

◆ SCIPsetIsFeasLE()

SCIP_Bool SCIPsetIsFeasLE	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if relative difference of val1 and val2 is not greater than feastol

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 6641 of file set.c.

Referenced by addSplitcons(), boundchgApplyGlobal(), branchcandCalcLPCands(), changeAncestorBranchings(), checkImplic(), checkLazyBounds(), checkRedundancy(), fixBounds(), fixInterdiction(), isBoundchgUseless(), nlpSolve(), nlpUpdateVarBounds(), primalAddOrigSol(), primalAddSol(), primalExistsSol(), SCIPboundchgUndo(), SCIPconflictAnalyzeDualProof(), SCIPgetDualProof(), SCIPgetFarkasProof(), SCIPimplicsAdd(), SCIPisFeasLE(), SCIPlpGetSol(), SCIPnodeAddBoundinfer(), SCIPnodePropagateImplics(), SCIPsolAdjustImplicitSolVals(), SCIPtreeBranchVar(), SCIPtreeBranchVarHole(), SCIPtreeBranchVarNary(), SCIPvarChgLbGlobal(), sepastoreApplyLb(), treeAddPendingBdchg(), varProcessChgLbGlobal(), varProcessChgLbLocal(), varProcessChgUbGlobal(), and varProcessChgUbLocal().

◆ SCIPsetIsFeasGT()

SCIP_Bool SCIPsetIsFeasGT	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if relative difference of val1 and val2 is greater than feastol

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 6663 of file set.c.

Referenced by applyImplic(), boundchgApplyGlobal(), checkImplic(), computeRelIntPoint(), detectImpliedBounds(), primalAddSol(), SCIPaddReoptDualBndchg(), SCIPconflictAnalyzePseudo(), SCIPcutpoolIsCutNew(), SCIPfixVar(), SCIPimplicsAdd(), SCIPinferVarLbCons(), SCIPinferVarLbProp(), SCIPisFeasGT(), SCIPnlrowIsRedundant(), SCIPnodePropagateImplics(), SCIProwIsRedundant(), SCIPsolAdjustImplicitSolVals(), SCIPsolCheck(), SCIPsolCheckOrig(), SCIPtightenVarLb(), SCIPtightenVarLbGlobal(), SCIPundoBdchgsProof(), SCIPvarAddVlb(), SCIPvarAddVub(), SCIPvarChgLbGlobal(), SCIPvarChgLbLocal(), SCIPvarFix(), SCIPvarGetImplRedcost(), SCIPvarRemoveCliquesImplicsVbs(), SCIPvarSignificantPscostDifference(), sepastoreIsBdchgApplicable(), undoBdchgsDualfarkas(), and undoBdchgsDualsol().

◆ SCIPsetIsFeasGE()

SCIP_Bool SCIPsetIsFeasGE	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if relative difference of val1 and val2 is not lower than -feastol

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 6685 of file set.c.

Referenced by addSplitcons(), boundchgApplyGlobal(), branchcandCalcLPCands(), changeAncestorBranchings(), checkImplic(), checkLazyBounds(), checkRedundancy(), computeRelIntPoint(), fixBounds(), fixInterdiction(), isBoundchgUseless(), nlpSolve(), nlpUpdateVarBounds(), primalExistsSol(), SCIPboundchgUndo(), SCIPimplicsAdd(), SCIPisFeasGE(), SCIPlpGetSol(), SCIPnodeAddBoundinfer(), SCIPnodePropagateImplics(), SCIPsolAdjustImplicitSolVals(), SCIPtreeBranchVar(), SCIPtreeBranchVarHole(), SCIPtreeBranchVarNary(), SCIPvarChgLbLazy(), SCIPvarChgUbGlobal(), SCIPvarChgUbLazy(), SCIPvarPscostThresholdProbabilityTest(), sepastoreApplyUb(), treeAddPendingBdchg(), varProcessChgLbLocal(), varProcessChgUbGlobal(), and varProcessChgUbLocal().

◆ SCIPsetIsFeasZero()

SCIP_Bool SCIPsetIsFeasZero	(	SCIP_SET *	set,
		SCIP_Real	val
	)

checks, if value is in range feasibility tolerance of 0.0

Parameters

set	global SCIP settings
val	value to process

Definition at line 6707 of file set.c.

Referenced by computeRelIntPoint(), focusnodeCleanupVars(), lpLexDualSimplex(), SCIPbranchGetBranchingPoint(), SCIPisFeasZero(), SCIPlpGetDualfarkas(), SCIPlpGetUnboundedSol(), sepastoreApplyBdchg(), sepastoreIsBdchgApplicable(), and varAddImplic().

◆ SCIPsetIsFeasPositive()

SCIP_Bool SCIPsetIsFeasPositive	(	SCIP_SET *	set,
		SCIP_Real	val
	)

checks, if value is greater than feasibility tolerance

Parameters

set	global SCIP settings
val	value to process

Definition at line 6718 of file set.c.

Referenced by focusnodeCleanupVars(), lpLexDualSimplex(), provedBound(), SCIPbranchGetBranchingPoint(), SCIPcutpoolSeparate(), SCIPisFeasPositive(), SCIPlpGetUnboundedSol(), SCIPsepastoreApplyCuts(), SCIPsolAdjustImplicitSolVals(), SCIPvarAddVlb(), SCIPvarCalcPscostConfidenceBound(), and sepastoreIsCutRedundantOrInfeasible().

◆ SCIPsetIsFeasNegative()

SCIP_Bool SCIPsetIsFeasNegative	(	SCIP_SET *	set,
		SCIP_Real	val
	)

checks, if value is lower than -feasibility tolerance

Parameters

set	global SCIP settings
val	value to process

Definition at line 6729 of file set.c.

Referenced by focusnodeCleanupVars(), provedBound(), SCIPbranchGetBranchingPoint(), SCIPisFeasNegative(), SCIPlpSolveAndEval(), SCIPsolAdjustImplicitSolVals(), SCIPvarAddVub(), and sepastoreIsCutRedundantOrInfeasible().

◆ SCIPsetIsFeasIntegral()

SCIP_Bool SCIPsetIsFeasIntegral	(	SCIP_SET *	set,
		SCIP_Real	val
	)

checks, if value is integral within the feasibility bounds

Parameters

set	global SCIP settings
val	value to process

Definition at line 6740 of file set.c.

Referenced by SCIPboundchgApply(), SCIPbranchcandGetPseudoCands(), SCIPcolGetStrongbranch(), SCIPcolGetStrongbranches(), SCIPdomchgAddBoundchg(), SCIPdomchgMakeStatic(), SCIPfixVar(), SCIPisFeasIntegral(), SCIPprobScaleObj(), SCIPsolAdjustImplicitSolVals(), SCIPsolRound(), SCIPstatUpdateVarRootLPBestEstimate(), SCIPtreeBranchVar(), SCIPtreeBranchVarHole(), SCIPtreeBranchVarNary(), SCIPvarChgLbGlobal(), SCIPvarChgLbLocal(), SCIPvarChgUbGlobal(), SCIPvarChgUbLocal(), SCIPvarFix(), SCIPvarGetMinPseudocostScore(), SCIPvarTryAggregateVars(), tryAggregateIntVars(), varAddLbchginfo(), varAddUbchginfo(), varProcessChgLbGlobal(), varProcessChgLbLocal(), varProcessChgUbGlobal(), and varProcessChgUbLocal().

◆ SCIPsetIsFeasFracIntegral()

SCIP_Bool SCIPsetIsFeasFracIntegral	(	SCIP_SET *	set,
		SCIP_Real	val
	)

checks, if given fractional part is smaller than feastol

Parameters

set	global SCIP settings
val	value to process

Definition at line 6751 of file set.c.

Referenced by branchcandCalcLPCands(), nlpCalcFracVars(), and SCIPisFeasFracIntegral().

◆ SCIPsetFeasFloor()

SCIP_Real SCIPsetFeasFloor	(	SCIP_SET *	set,
		SCIP_Real	val
	)

rounds value + feasibility tolerance down to the next integer in feasibility tolerance

Parameters

set	global SCIP settings
val	value to process

Definition at line 6764 of file set.c.

Referenced by adjustedUb(), analyzeStrongbranch(), SCIPcalcChildEstimateIncrease(), SCIPconflictAnalyzeStrongbranch(), SCIPfeasFloor(), SCIPgetVarPseudocostScore(), SCIPgetVarPseudocostScoreCurrentRun(), SCIPprobScaleObj(), SCIPsolRound(), SCIPtreeBranchVar(), SCIPtreeBranchVarHole(), SCIPtreeCalcChildEstimate(), selectVarMultAggrBranching(), tightenSingleVar(), and tryAggregateIntVars().

◆ SCIPsetFeasCeil()

SCIP_Real SCIPsetFeasCeil	(	SCIP_SET *	set,
		SCIP_Real	val
	)

rounds value - feasibility tolerance up to the next integer in feasibility tolerance

Parameters

set	global SCIP settings
val	value to process

Definition at line 6775 of file set.c.

Referenced by adjustedLb(), analyzeStrongbranch(), primalSetUpperbound(), SCIPcalcChildEstimateIncrease(), SCIPconflictAnalyzeStrongbranch(), SCIPfeasCeil(), SCIPgetVarPseudocostScore(), SCIPgetVarPseudocostScoreCurrentRun(), SCIPsolRound(), SCIPtreeBranchVar(), SCIPtreeBranchVarHole(), SCIPtreeCalcChildEstimate(), and selectVarMultAggrBranching().

◆ SCIPsetFeasRound()

SCIP_Real SCIPsetFeasRound	(	SCIP_SET *	set,
		SCIP_Real	val
	)

rounds value to the nearest integer in feasibility tolerance

Parameters

set	global SCIP settings
val	value to process

Definition at line 6786 of file set.c.

Referenced by SCIPfeasRound().

◆ SCIPsetFeasFrac()

SCIP_Real SCIPsetFeasFrac	(	SCIP_SET *	set,
		SCIP_Real	val
	)

returns fractional part of value, i.e. x - floor(x) in feasibility tolerance

Parameters

set	global SCIP settings
val	value to process

Definition at line 6797 of file set.c.

Referenced by branchcandCalcLPCands(), nlpCalcFracVars(), and SCIPfeasFrac().

◆ SCIPsetIsDualfeasEQ()

SCIP_Bool SCIPsetIsDualfeasEQ	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if relative difference of values is in range of dual feasibility tolerance

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 6808 of file set.c.

Referenced by SCIPisDualfeasEQ().

◆ SCIPsetIsDualfeasLT()

SCIP_Bool SCIPsetIsDualfeasLT	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if relative difference of val1 and val2 is lower than dual feasibility tolerance

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 6830 of file set.c.

Referenced by SCIPisDualfeasLT(), and SCIPlpGetDualfarkas().

◆ SCIPsetIsDualfeasLE()

SCIP_Bool SCIPsetIsDualfeasLE	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if relative difference of val1 and val2 is not greater than dual feasibility tolerance

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 6852 of file set.c.

Referenced by SCIPisDualfeasLE().

◆ SCIPsetIsDualfeasGT()

SCIP_Bool SCIPsetIsDualfeasGT	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if relative difference of val1 and val2 is greater than dual feasibility tolerance

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 6874 of file set.c.

Referenced by SCIPisDualfeasGT(), and SCIPlpGetDualfarkas().

◆ SCIPsetIsDualfeasGE()

SCIP_Bool SCIPsetIsDualfeasGE	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if relative difference of val1 and val2 is not lower than -dual feasibility tolerance

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 6896 of file set.c.

Referenced by SCIPisDualfeasGE().

◆ SCIPsetIsDualfeasZero()

SCIP_Bool SCIPsetIsDualfeasZero	(	SCIP_SET *	set,
		SCIP_Real	val
	)

checks, if value is in range feasibility tolerance of 0.0

Parameters

set	global SCIP settings
val	value to process

Definition at line 6918 of file set.c.

Referenced by addLocalRows(), checkDualFeasibility(), lpLexDualSimplex(), SCIPgetDualProof(), SCIPgetFarkasProof(), SCIPisDualfeasZero(), and SCIPvarUpdateBestRootSol().

◆ SCIPsetIsDualfeasPositive()

SCIP_Bool SCIPsetIsDualfeasPositive	(	SCIP_SET *	set,
		SCIP_Real	val
	)

checks, if value is greater than dual feasibility tolerance

Parameters

set	global SCIP settings
val	value to process

Definition at line 6929 of file set.c.

Referenced by getImplVarRedcost(), SCIPisDualfeasPositive(), SCIPlpGetDualDegeneracy(), SCIPlpGetSol(), SCIPprobUpdateBestRootSol(), and SCIPvarGetImplRedcost().

◆ SCIPsetIsDualfeasNegative()

SCIP_Bool SCIPsetIsDualfeasNegative	(	SCIP_SET *	set,
		SCIP_Real	val
	)

checks, if value is lower than -dual feasibility tolerance

Parameters

set	global SCIP settings
val	value to process

Definition at line 6940 of file set.c.

Referenced by getImplVarRedcost(), SCIPisDualfeasNegative(), SCIPlpGetDualDegeneracy(), SCIPlpGetSol(), SCIPprobUpdateBestRootSol(), and SCIPvarGetImplRedcost().

◆ SCIPsetIsDualfeasIntegral()

SCIP_Bool SCIPsetIsDualfeasIntegral	(	SCIP_SET *	set,
		SCIP_Real	val
	)

checks, if value is integral within the dual feasibility bounds

Parameters

set	global SCIP settings
val	value to process

Definition at line 6951 of file set.c.

Referenced by SCIPisDualfeasIntegral().

◆ SCIPsetIsDualfeasFracIntegral()

SCIP_Bool SCIPsetIsDualfeasFracIntegral	(	SCIP_SET *	set,
		SCIP_Real	val
	)

checks, if given fractional part is smaller than dual feasibility tolerance

Parameters

set	global SCIP settings
val	value to process

Definition at line 6962 of file set.c.

Referenced by SCIPisDualfeasFracIntegral().

◆ SCIPsetDualfeasFloor()

SCIP_Real SCIPsetDualfeasFloor	(	SCIP_SET *	set,
		SCIP_Real	val
	)

rounds value + dual feasibility tolerance down to the next integer

Parameters

set	global SCIP settings
val	value to process

Definition at line 6975 of file set.c.

Referenced by SCIPdualfeasFloor().

◆ SCIPsetDualfeasCeil()

SCIP_Real SCIPsetDualfeasCeil	(	SCIP_SET *	set,
		SCIP_Real	val
	)

rounds value - dual feasibility tolerance up to the next integer

Parameters

set	global SCIP settings
val	value to process

Definition at line 6986 of file set.c.

Referenced by SCIPdualfeasCeil().

◆ SCIPsetDualfeasRound()

SCIP_Real SCIPsetDualfeasRound	(	SCIP_SET *	set,
		SCIP_Real	val
	)

rounds value to the nearest integer in dual feasibility tolerance

Parameters

set	global SCIP settings
val	value to process

Definition at line 6997 of file set.c.

Referenced by SCIPdualfeasRound().

◆ SCIPsetDualfeasFrac()

SCIP_Real SCIPsetDualfeasFrac	(	SCIP_SET *	set,
		SCIP_Real	val
	)

returns fractional part of value, i.e. x - floor(x) in dual feasibility tolerance

Parameters

set	global SCIP settings
val	value to process

Definition at line 7008 of file set.c.

Referenced by SCIPdualfeasFrac().

◆ SCIPsetIsLbBetter()

SCIP_Bool SCIPsetIsLbBetter	(	SCIP_SET *	set,
		SCIP_Real	newlb,
		SCIP_Real	oldlb,
		SCIP_Real	oldub
	)

checks, if the given new lower bound is at least min(oldub - oldlb, |oldlb|) times the bound strengthening epsilon better than the old one or the change in the lower bound would fix the sign of the variable

Parameters

set	global SCIP settings
newlb	new lower bound
oldlb	old lower bound
oldub	old upper bound

Definition at line 7022 of file set.c.

References EPSGT, MAX, MIN, NULL, REALABS, SCIPsetIsLE(), and TRUE.

Referenced by SCIPinferVarLbCons(), SCIPinferVarLbProp(), SCIPisLbBetter(), SCIPtightenVarLb(), and SCIPtightenVarLbGlobal().

◆ SCIPsetIsUbBetter()

SCIP_Bool SCIPsetIsUbBetter	(	SCIP_SET *	set,
		SCIP_Real	newub,
		SCIP_Real	oldlb,
		SCIP_Real	oldub
	)

checks, if the given new upper bound is at least min(oldub - oldlb, |oldub|) times the bound strengthening epsilon better than the old one or the change in the upper bound would fix the sign of the variable

Parameters

set	global SCIP settings
newub	new upper bound
oldlb	old lower bound
oldub	old upper bound

Definition at line 7043 of file set.c.

References EPSLT, MAX, MIN, NULL, REALABS, SCIPsetIsLE(), and TRUE.

Referenced by SCIPinferVarUbCons(), SCIPinferVarUbProp(), SCIPisUbBetter(), SCIPtightenVarUb(), and SCIPtightenVarUbGlobal().

◆ SCIPsetIsEfficacious()

SCIP_Bool SCIPsetIsEfficacious	(	SCIP_SET *	set,
		SCIP_Bool	root,
		SCIP_Real	efficacy
	)

checks, if the given cut's efficacy is larger than the minimal cut efficacy

Parameters

set	global SCIP settings
root	should the root's minimal cut efficacy be used?
efficacy	efficacy of the cut

Definition at line 7061 of file set.c.

Referenced by SCIPisEfficacious(), SCIProwIsLPEfficacious(), SCIProwIsSolEfficacious(), and SCIPsepastoreRemoveInefficaciousCuts().

◆ SCIPsetIsRelEQ()

SCIP_Bool SCIPsetIsRelEQ	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if relative difference of values is in range of epsilon

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 7076 of file set.c.

Referenced by SCIPisRelEQ(), SCIPtreeBranchVar(), and SCIPtreeBranchVarNary().

◆ SCIPsetIsRelLT()

SCIP_Bool SCIPsetIsRelLT	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if relative difference of val1 and val2 is lower than epsilon

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 7098 of file set.c.

Referenced by SCIPbranchGetBranchingPoint(), SCIPisRelLT(), and SCIPtreeBranchVarNary().

◆ SCIPsetIsRelLE()

SCIP_Bool SCIPsetIsRelLE	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if relative difference of val1 and val2 is not greater than epsilon

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 7120 of file set.c.

Referenced by SCIPisRelLE(), and SCIPnlrowCreate().

◆ SCIPsetIsRelGT()

SCIP_Bool SCIPsetIsRelGT	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if relative difference of val1 and val2 is greater than epsilon

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 7142 of file set.c.

Referenced by SCIPbranchGetBranchingPoint(), SCIPisRelGT(), SCIPrelaxExec(), and SCIPtreeBranchVarNary().

◆ SCIPsetIsRelGE()

SCIP_Bool SCIPsetIsRelGE	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if relative difference of val1 and val2 is not lower than -epsilon

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 7164 of file set.c.

Referenced by lpSolve(), SCIPisRelGE(), and SCIPnodeSetEstimate().

◆ SCIPsetIsSumRelEQ()

SCIP_Bool SCIPsetIsSumRelEQ	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if relative difference of values is in range of sumepsilon

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 7186 of file set.c.

Referenced by SCIPisSumRelEQ().

◆ SCIPsetIsSumRelLT()

SCIP_Bool SCIPsetIsSumRelLT	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if relative difference of val1 and val2 is lower than sumepsilon

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 7208 of file set.c.

Referenced by SCIPisSumRelLT().

◆ SCIPsetIsSumRelLE()

SCIP_Bool SCIPsetIsSumRelLE	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if relative difference of val1 and val2 is not greater than sumepsilon

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 7230 of file set.c.

Referenced by SCIPisSumRelLE().

◆ SCIPsetIsSumRelGT()

SCIP_Bool SCIPsetIsSumRelGT	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if relative difference of val1 and val2 is greater than sumepsilon

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 7252 of file set.c.

Referenced by SCIPisSumRelGT().

◆ SCIPsetIsSumRelGE()

SCIP_Bool SCIPsetIsSumRelGE	(	SCIP_SET *	set,
		SCIP_Real	val1,
		SCIP_Real	val2
	)

checks, if relative difference of val1 and val2 is not lower than -sumepsilon

Parameters

set	global SCIP settings
val1	first value to be compared
val2	second value to be compared

Definition at line 7274 of file set.c.

Referenced by SCIPisSumRelGE().

◆ SCIPsetGetSubscipsOff()

SCIP_Bool SCIPsetGetSubscipsOff ( SCIP_SET * set )

returns the flag indicating whether sub-SCIPs that could cause recursion have been deactivated

Parameters

set	global SCIP settings

Definition at line 7296 of file set.c.

Referenced by executeUserDefinedSolvesub(), generateBendersCuts(), numSubproblemsToCheck(), SCIPbendersExec(), SCIPgetSubscipsOff(), and solveBendersSubproblems().

◆ SCIPsetIsUpdateUnreliable()

SCIP_Bool SCIPsetIsUpdateUnreliable	(	SCIP_SET *	set,
		SCIP_Real	newvalue,
		SCIP_Real	oldvalue
	)

Checks, if an iteratively updated value is reliable or should be recomputed from scratch. This is useful, if the value, e.g., the activity of a linear constraint or the pseudo objective value, gets a high absolute value during the optimization process which is later reduced significantly. In this case, the last digits were canceled out when increasing the value and are random after decreasing it. We dot not consider the cancellations which can occur during increasing the absolute value because they just cannot be expressed using fixed precision floating point arithmetic, anymore. The idea to get more reliable values is to always store the last reliable value, where increasing the absolute of the value is viewed as preserving reliability. Then, after each update, the new absolute value can be compared against the last reliable one with this method, checking whether it was decreased by a factor of at least "lp/recompfac" and should be recomputed.

Parameters

set	global SCIP settings
newvalue	new value after update
oldvalue	old value, i.e., last reliable value

Definition at line 7316 of file set.c.

References ABS, MAX, NULL, and SCIP_Real.

Referenced by lpUpdateObjval(), and SCIPisUpdateUnreliable().

◆ SCIPsetPrintDebugMessage()

void SCIPsetPrintDebugMessage	(	SCIP_SET *	set,
		const char *	sourcefile,
		int	sourceline,
		const char *	formatstr,
			...
	)

prints a debug message

Parameters

set	global SCIP settings
sourcefile	name of the source file that called the function
sourceline	line in the source file where the function was called
formatstr	format string like in printf() function
...	format arguments line in printf() function

Definition at line 7332 of file set.c.

◆ SCIPsetDebugMessagePrint()

void SCIPsetDebugMessagePrint	(	SCIP_SET *	set,
		const char *	formatstr,
			...
	)

prints a debug message without precode

Parameters

set	global SCIP settings
formatstr	format string like in printf() function
...	format arguments line in printf() function

Definition at line 7376 of file set.c.

◆ SCIPsetInitializeRandomSeed()

unsigned int SCIPsetInitializeRandomSeed	(	SCIP_SET *	set,
		unsigned int	initialseedvalue
	)

modifies an initial seed value with the global shift of random seeds

Parameters

set	global SCIP settings
initialseedvalue	initial seed value to be modified

Definition at line 7393 of file set.c.

Referenced by lpSolveStable(), SCIPdivesetReset(), SCIPinitializeRandomSeed(), SCIPreoptCreate(), and SCIPsepastoreCreate().

SCIP

Detailed Description

Macros

Functions

Macro Definition Documentation

◆ SCIP_DEFAULT_BRANCH_SCOREFUNC

◆ SCIP_DEFAULT_BRANCH_SCOREFAC

◆ SCIP_DEFAULT_BRANCH_PREFERBINARY

◆ SCIP_DEFAULT_BRANCH_CLAMP

◆ SCIP_DEFAULT_BRANCH_MIDPULL

◆ SCIP_DEFAULT_BRANCH_MIDPULLRELDOMTRIG

◆ SCIP_DEFAULT_BRANCH_LPGAINNORMALIZE

◆ SCIP_DEFAULT_BRANCH_DELAYPSCOST

◆ SCIP_DEFAULT_BRANCH_DIVINGPSCOST

◆ SCIP_DEFAULT_BRANCH_FORCEALL

◆ SCIP_DEFAULT_BRANCH_FIRSTSBCHILD

◆ SCIP_DEFAULT_BRANCH_CHECKSBSOL

◆ SCIP_DEFAULT_BRANCH_ROUNDSBSOL

◆ SCIP_DEFAULT_BRANCH_SUMADJUSTSCORE

◆ SCIP_DEFAULT_COMPR_ENABLE

◆ SCIP_DEFAULT_CONF_ENABLE

◆ SCIP_DEFAULT_CONF_MAXVARSFAC

◆ SCIP_DEFAULT_CONF_MINMAXVARS

◆ SCIP_DEFAULT_CONF_MAXLPLOOPS

◆ SCIP_DEFAULT_CONF_LPITERATIONS

◆ SCIP_DEFAULT_CONF_USEPROP

◆ SCIP_DEFAULT_CONF_USEINFLP

◆ SCIP_DEFAULT_CONF_USEBOUNDLP

◆ SCIP_DEFAULT_CONF_USESB

◆ SCIP_DEFAULT_CONF_USEPSEUDO

◆ SCIP_DEFAULT_CONF_PREFINFPROOF

◆ SCIP_DEFAULT_CONF_SEPARATE

◆ SCIP_DEFAULT_CONF_DYNAMIC

◆ SCIP_DEFAULT_CONF_MAXSTORESIZE

◆ SCIP_DEFAULT_CONF_RECONVLEVELS

◆ SCIP_DEFAULT_CONF_CLEANBNDDEPEND

◆ SCIP_DEFAULT_CONF_FUIPLEVELS

◆ SCIP_DEFAULT_CONF_INTERCONSS

◆ SCIP_DEFAULT_CONF_MAXCONSS

◆ SCIP_DEFAULT_CONF_PREFERBINARY

◆ SCIP_DEFAULT_CONF_ALLOWLOCAL

◆ SCIP_DEFAULT_CONF_SETTLELOCAL

◆ SCIP_DEFAULT_CONF_REPROPAGATE

◆ SCIP_DEFAULT_CONF_KEEPREPROP

◆ SCIP_DEFAULT_CONF_REMOVEABLE

◆ SCIP_DEFAULT_CONF_DEPTHSCOREFAC

◆ SCIP_DEFAULT_CONF_PROOFSCOREFAC

◆ SCIP_DEFAULT_CONF_UPLOCKSCOREFAC

◆ SCIP_DEFAULT_CONF_DOWNLOCKSCOREFAC

◆ SCIP_DEFAULT_CONF_SCOREFAC

◆ SCIP_DEFAULT_CONF_RESTARTNUM

◆ SCIP_DEFAULT_CONF_RESTARTFAC

◆ SCIP_DEFAULT_CONF_IGNORERELAXEDBD

◆ SCIP_DEFAULT_CONF_MAXVARSDETECTIMPLIEDBOUNDS

◆ SCIP_DEFAULT_CONF_FULLSHORTENCONFLICT

◆ SCIP_DEFAULT_CONF_CONFLITWEIGHT

◆ SCIP_DEFAULT_CONF_CONFLITGRAPHWEIGHT

◆ SCIP_DEFAULT_CONF_WEIGHTSIZE

◆ SCIP_DEFAULT_CONF_WEIGHTREPROPDEPTH

◆ SCIP_DEFAULT_CONF_WEIGHTVALIDDEPTH

◆ SCIP_DEFAULT_CONF_MINIMPROVE

◆ SCIP_DEFAULT_CONF_SEPAALTPROOFS

◆ SCIP_DEFAULT_CONF_USELOCALROWS

◆ SCIP_DEFAULT_CONS_AGELIMIT

◆ SCIP_DEFAULT_CONS_OBSOLETEAGE

◆ SCIP_DEFAULT_CONS_DISABLEENFOPS

◆ SCIP_DEFAULT_DISP_VERBLEVEL

◆ SCIP_DEFAULT_DISP_WIDTH

◆ SCIP_DEFAULT_DISP_FREQ

◆ SCIP_DEFAULT_DISP_HEADERFREQ

◆ SCIP_DEFAULT_DISP_LPINFO

◆ SCIP_DEFAULT_DISP_ALLVIOLS

◆ SCIP_DEFAULT_DISP_RELEVANTSTATS

◆ SCIP_DEFAULT_HEUR_USEUCTSUBSCIP

◆ SCIP_DEFAULT_HISTORY_VALUEBASED

◆ SCIP_DEFAULT_HISTORY_ALLOWMERGE

◆ SCIP_DEFAULT_HISTORY_ALLOWTRANSFER

◆ SCIP_DEFAULT_LIMIT_TIME

◆ SCIP_DEFAULT_LIMIT_MEMORY

◆ SCIP_DEFAULT_LIMIT_GAP