Detailed Description

commonly used methods for strings

Functions
int	SCIPmemccpy (char dest, const char src, char stop, unsigned int cnt)

void	SCIPprintSysError (const char *message)

char *	SCIPstrtok (char s, const char delim, char **ptrptr)

void	SCIPescapeString (char t, int bufsize, const char s)

int	SCIPsnprintf (char t, int len, const char s,...)

int	SCIPstrncpy (char t, const char s, int size)

SCIP_Bool	SCIPstrToIntValue (const char str, int value, char **endptr)

SCIP_Bool	SCIPstrToRealValue (const char str, SCIP_Real value, char **endptr)

void	SCIPstrCopySection (const char str, char startchar, char endchar, char token, int size, char **endptr)

Function Documentation

◆ SCIPmemccpy()

int SCIPmemccpy	(	char *	dest,
		const char *	src,
		char	stop,
		unsigned int	cnt
	)

copies characters from 'src' to 'dest', copying is stopped when either the 'stop' character is reached or after 'cnt' characters have been copied, whichever comes first.

Note: undefined behaviuor on overlapping arrays

copies characters from 'src' to 'dest', copying is stopped when either the 'stop' character is reached or after 'cnt' characters have been copied, whichever comes first.

Note: undefined behavior on overlapping arrays

Parameters

dest	destination pointer to copy to
src	source pointer to copy from
stop	character when found stop copying
cnt	maximal number of characters to copy

Definition at line 10137 of file misc.c.

References NULL.

Referenced by generateSecantCutNoCheck(), mpsinputSetObjname(), mpsinputSetProbname(), readBounds(), readCoefficients(), readCols(), readColsMop(), readRanges(), readRhs(), readSOS(), readSos(), stoinputSetProbname(), stoinputSetStochtype(), and timinputSetProbname().

◆ SCIPprintSysError()

void SCIPprintSysError ( const char * message )

prints an error message containing of the given string followed by a string describing the current system error; prefers to use the strerror_r method, which is threadsafe; on systems where this method does not exist, NO_STRERROR_R should be defined (see INSTALL), in this case, srerror is used which is not guaranteed to be threadsafe (on SUN-systems, it actually is)

prints an error message containing of the given string followed by a string describing the current system error

Prefers to use the strerror_r method, which is threadsafe. On systems where this method does not exist, NO_STRERROR_R should be defined (see INSTALL). In this case, strerror is used which is not guaranteed to be threadsafe (on SUN-systems, it actually is).

Parameters

message first part of the error message, e.g. the filename

Definition at line 10162 of file misc.c.

References NULL, SCIP_MAXSTRLEN, and SCIPmessagePrintError().

Referenced by LOPreadFile(), processArguments(), readBounds(), readDiffFile(), readFZNFile(), readLIBSVM(), readLPFile(), readMOP(), readMps(), readOPBFile(), readPIPFile(), readSol(), readSolFile(), readSto(), readTim(), SCIP_DECL_DIALOGEXEC(), SCIP_DECL_EVENTEXEC(), SCIP_DECL_READERREAD(), SCIPlpWriteMip(), SCIPparamsetRead(), SCIPparamsetWrite(), SCIPparamWrite(), SCIPprobdataCreate(), SCIPprocessShellArguments(), SCIPvisualInit(), SCIPvisualizeConsCumulative(), and writeProblem().

◆ SCIPstrtok()

char* SCIPstrtok	(	char *	s,
		const char *	delim,
		char **	ptrptr
	)

extracts tokens from strings - wrapper method for strtok_r()

Parameters

s	string to parse
delim	delimiters for parsing
ptrptr	pointer to working char pointer - must stay the same while parsing

Definition at line 10211 of file misc.c.

Referenced by findBestObjectiveValue(), getNJobs(), getNResources(), getResourcesNames(), mpsinputReadLine(), parseConstraint(), readCnf(), SCIP_DECL_CONSPARSE(), smpsinputReadLine(), stoinputReadLine(), and timinputReadLine().

◆ SCIPescapeString()

void SCIPescapeString	(	char *	t,
		int	bufsize,
		const char *	s
	)

translates the given string into a string where symbols ", ', and spaces are escaped with a \ prefix

Parameters

t	target buffer to store escaped string
bufsize	size of buffer t
s	string to transform into escaped string

Definition at line 10225 of file misc.c.

References NULL.

Referenced by SCIP_DECL_DIALOGEXEC(), and SCIPdialoghdlrAddHistory().

◆ SCIPsnprintf()

int SCIPsnprintf	(	char *	t,
		int	len,
		const char *	s,
			...
	)

safe version of snprintf

Parameters

t	target string
len	length of the string to copy
s	source string

Definition at line 10253 of file misc.c.

References NULL, and SCIPerrorMessage.

Referenced by ObjPricerVRP::add_tour_variable(), addAuxiliaryVariablesToMaster(), addBranchingComplementaritiesSOS1(), addCliques(), addCut(), addExtendedAsymmetricFormulation(), addExtendedFlowFormulation(), addExtraCliques(), addFixParamDialog(), addLocalBranchingConstraint(), addLocalConss(), addPathCuts(), addRelaxation(), addScenarioVarsAndConsToProb(), addSetParamDialog(), addSplitcons(), addSubtourCuts(), addSymresackConss(), addSymresackInequality(), addTourCuts(), addVarbound(), addVarCardinality(), addVariable(), adjustOversizedJobBounds(), alnsIncludeNeighborhood(), appendVarCardinality(), applyCliqueFixings(), applyFixings(), applyRepair(), assignAuxiliaryVariables(), BENDERS_CUTORACLE(), branchBalancedCardinality(), branchOnVertex(), btPrintSubtree(), buildScenariosFromBlocks(), checkConsnames(), checkVarnames(), cliquePresolve(), componentCreateSubscip(), computeCut(), computeEffectiveHorizon(), computeInteriorPoint(), computeMinDistance(), consdataCollectLinkingCons(), consdataCreateBinvars(), copyCuts(), createAndAddAndCons(), createAndAddLinearCons(), createAndAddProofcons(), createAndAddTransferredCut(), createCapacityRestriction(), createCapacityRestrictionIntvars(), createCGCutCMIR(), createCGCutDirect(), createCGCutStrongCG(), createCipFormulation(), createConflict(), createConstraints(), createCoverCutsTimepoint(), createCoveringProblem(), createDegreeConstraints(), createIndicatorConstraint(), createInitialColumns(), createIntervalRelaxation(), createKKTComplementarityBinary(), createKKTComplementarityBounds(), createKKTComplementarityLinear(), createKKTDualCons(), createMasterproblem(), createMIP(), createMipCpFormulation(), createMipFormulation(), createOriginalproblem(), createPartitionCut(), createPatternVars(), createPrizeConstraints(), createProbOnlyEdge(), createProbQP(), createProbSimplified(), createProbSimplifiedTest(), createRelaxation(), createRows(), createScenariosFromBlocks(), createSubproblem(), createSubproblems(), createSubSCIP(), createSubscip(), createVariableMappings(), createVariables(), createVarUbs(), deleteRedundantVars(), detectRedundantVars(), disaggregate(), displayRelevantStats(), doBendersCreate(), doBenderscutCreate(), doBranchruleCreate(), doComprCreate(), doConcsolverTypeCreate(), doConflicthdlrCreate(), doConshdlrCreate(), doCopy(), doDispCreate(), doHeurCreate(), doNodeselCreate(), doPresolCreate(), doPricerCreate(), doPropCreate(), doRelaxCreate(), doSepaCreate(), doTableCreate(), dualPresolve(), execmain(), extendToCover(), extensionOperatorSOS1(), extractGates(), findAggregation(), findBestObjectiveValue(), findCumulativeConss(), findScenarioVar(), fixDeleteOrUpgradeCons(), flattenAssignment(), flattenFloat(), forbidCover(), forbidFixation(), generateAndApplyBendersCuts(), generateAndApplyBendersIntegerCuts(), generateAndApplyBendersNogoodCut(), generateBoundInequalityFromSOS1Nodes(), generateConvexConcaveEstimator(), generateCut(), generateCutConvex(), generateCutFactorableDo(), generateCutLTI(), generateCutNonConvex(), generateCutPoint(), generateCutProjectedPoint(), generateCutSol(), generateDisjCutSOS1(), generateLinearizationCut(), generateOddCycleCut(), generateRowCardinality(), generateRowSOS2(), generateSecantCut(), generateZerohalfCut(), get_scale_order(), getFixedVariable(), getJobs(), getScenarioDecompVar(), getScenarioEntityName(), includeConshdlrCountsols(), initLP(), initProblem(), LOPseparate(), lpBarrier(), lpDualSimplex(), lpPrimalSimplex(), newsolCliqueAddRow(), nodepartitionIsConnected(), paramsetSetHeuristicsAggressive(), paramsetSetHeuristicsDefault(), paramsetSetHeuristicsOff(), paramsetSetPresolvingAggressive(), paramsetSetPresolvingDefault(), paramsetSetPresolvingFast(), paramsetSetPresolvingOff(), paramsetSetSeparatingAggressive(), paramsetSetSeparatingDefault(), paramsetSetSeparatingOff(), parseConstantArray(), parseConstraint(), parseName(), parseVariableArray(), performImplicationGraphAnalysis(), preprocessConstraintPairs(), presolveAddKKTLinearCons(), presolveCreateBenTalNemirovskiApproxDim3(), presolveCreateGlineurApproxDim3(), presolveCreateOuterApprox(), presolveDisaggregate(), presolveFindDuplicates(), presolveTryAddAND(), presolveTryAddLinearReform(), pricing(), printActiveVariables(), printAggregatedCons(), printAndCons(), printBoundSection(), printConformName(), printEntry(), printExpr(), printIndicatorCons(), printLinearCons(), printLinearRow(), printName(), printNLRow(), printNonlinearRow(), printPBRow(), printQuadraticRow(), printRecord(), printRow(), printRowNl(), printRowType(), printSignpowerRow(), printSOCCons(), printSOSCons(), printSosCons(), printStart(), probdataPrintGraph(), processArguments(), processNlRow(), propIndicator(), readArguments(), readBlocks(), readBounds(), readCnf(), readCnfLine(), readConstraints(), readIndep(), readIndicators(), readLIBSVM(), readScenarios(), readSemicontinuous(), readSol(), readSOS(), readSos(), readSOScons(), readVariables(), reformMonomial(), reformNode2Var(), reformulate(), resolvePropagation(), SCIP_DECL_CONCSOLVERCREATEINST(), SCIP_DECL_CONFLICTEXEC(), SCIP_DECL_CONSENFOLP(), SCIP_DECL_CONSINITLP(), SCIP_DECL_CONSINITPRE(), SCIP_DECL_CONSPARSE(), SCIP_DECL_CONSPRESOL(), SCIP_DECL_CONSTRANS(), SCIP_DECL_DIALOGDESC(), SCIP_DECL_DIALOGEXEC(), SCIP_DECL_EXPRGRAPHNODEREFORM(), SCIP_DECL_LINCONSUPGD(), SCIP_DECL_NONLINCONSUPGD(), SCIP_DECL_PARAMCHGD(), SCIP_DECL_PRESOLEXEC(), SCIP_DECL_PRICERREDCOST(), SCIP_DECL_QUADCONSUPGD(), SCIP_DECL_READERCOPY(), SCIP_DECL_READERREAD(), SCIP_DECL_SEPAEXECLP(), SCIP_DECL_SOLVECUMULATIVE(), SCIPbendersMergeSubproblemIntoMaster(), SCIPconcsolverCreateInstance(), SCIPcopyLargeNeighborhoodSearch(), SCIPcreateConsCardinality(), SCIPcreateConsIndicator(), SCIPcreateNlpSolverWorhp(), SCIPcreateSchedulingProblem(), SCIPdialogDisplayMenuEntry(), SCIPdialogGetPath(), SCIPdialoghdlrAddHistory(), SCIPdialoghdlrCreate(), SCIPdialoghdlrGetLine(), SCIPdialoghdlrGetWord(), SCIPdigraphPrintGml(), SCIPdispLongint(), SCIPdispTime(), SCIPdivesetCreate(), SCIPException::SCIPException(), SCIPexprPrint(), SCIPgetErrorString(), SCIPgetVarCopy(), SCIPincludeBenderscutInt(), SCIPincludeBenderscutNogood(), SCIPincludeBenderscutOpt(), SCIPincludeNlpi(), SCIPincludeNonlinconsUpgrade(), SCIPincludeQuadconsUpgrade(), SCIPincludeReaderZpl(), SCIPlpWriteMip(), SCIPnlpiOraclePrintProblemGams(), SCIPnodePrintAncestorBranchings(), SCIPparamsetSetEmphasis(), SCIPparamsetSetToSubscipsOff(), SCIPprintConflictStatistics(), SCIPprintReal(), SCIPprintSolutionStatistics(), SCIPprobdataAddNewSol(), SCIPprobdataCreate(), SCIPprobdataPrintGraph2(), SCIPprobTransform(), SCIPreaderWrite(), SCIPreoptApplyCuts(), SCIPreoptApplyGlbConss(), SCIPsetConshdlrPresol(), SCIPsetConshdlrProp(), SCIPsetConshdlrSepa(), SCIPsetPropPresol(), SCIPStpIncludeHeurTM(), SCIPtransformMinUC(), SCIPvarNegate(), SCIPvarTransform(), SCIPverifyCircularPatternNLP(), SCIPvisualizeConsCumulative(), SCIPwriteCliqueGraph(), SCIPwriteGms(), SCIPwriteLp(), SCIPwriteMps(), SCIPwritePip(), separateCons(), separateCuts(), separateGLS(), separateIndicators(), separatePerspective(), separateSCIs(), separateSequLiftedExtendedWeightInequality(), separateSequLiftedMinimalCoverInequality(), separateSupLiftedMinimalCoverInequality(), setObjective(), setupAndSolveCumulativeSubscip(), setupAndSolveFiniteSolSubscip(), setupProblem(), setupSubscipLpface(), solveClassification(), solveMinIISC(), solvePricingMINLP(), strengthenVarbounds(), syntaxError(), tightenCoefs(), tightenSingleVar(), tightenWeights(), toString(), tryAggregateIntVars(), tryUpgradingLogicor(), tryUpgradingSetppc(), tryUpgradingXor(), updateSolNodeArray(), upgradeCons(), upgradeIndicatorSuperindicator(), upgradeLinearSuperindicator(), varSetName(), visualizeSolutionAscii(), writeFzn(), writeOpb(), writeOpbFixedVars(), writeOpbObjective(), and writeOpbRelevantAnds().

◆ SCIPstrncpy()

int SCIPstrncpy	(	char *	t,
		const char *	s,
		int	size
	)

safe version of strncpy

Copies string in s to t using at most size-1 nonzero characters (strncpy copies size characters). It always adds a terminating zero char. Does not pad the remaining string with zero characters (unlike strncpy). Returns the number of copied nonzero characters, if the length of s is at most size - 1, and returns size otherwise. Thus, the original string was truncated if the return value is size.

Parameters

t	target string
s	source string
size	maximal size of t

Definition at line 10296 of file misc.c.

Referenced by appendBuffer(), exprparseReadVariable(), readInputLine(), readPolynomial(), SCIP_DECL_DIALOGEXEC(), SCIP_DECL_READERREAD(), SCIPdialogGetPath(), SCIPdialoghdlrAddHistory(), and xmlProcess().

◆ SCIPstrToIntValue()

SCIP_Bool SCIPstrToIntValue	(	const char *	str,
		int *	value,
		char **	endptr
	)

extract the next token as a integer value if it is one; in case no value is parsed the endptr is set to str

Returns: Returns TRUE if a value could be extracted, otherwise FALSE

Parameters

str	string to search
value	pointer to store the parsed value
endptr	pointer to store the final string position if successfully parsed, otherwise `str`

Definition at line 10323 of file misc.c.

References FALSE, NULL, SCIPdebugMessage, and TRUE.

Referenced by exprParse(), getJobId(), getJobs(), getPrecedence(), parseDetails(), readFile(), and SCIP_DECL_DIALOGEXEC().

◆ SCIPstrToRealValue()

SCIP_Bool SCIPstrToRealValue	(	const char *	str,
		SCIP_Real *	value,
		char **	endptr
	)

extract the next token as a double value if it is one; in case a value is parsed the endptr is set to str

Returns: Returns TRUE if a value could be extracted, otherwise FALSE

extract the next token as a double value if it is one; in case no value is parsed the endptr is set to str

Returns: Returns TRUE if a value could be extracted, otherwise FALSE

Parameters

str	string to search
value	pointer to store the parsed value
endptr	pointer to store the final string position if successfully parsed, otherwise `str`

Definition at line 10354 of file misc.c.

References FALSE, NULL, SCIPdebugMessage, and TRUE.

Referenced by exprParse(), getFixedVariable(), getNJobs(), getNResources(), getObjective(), getResourcesCapacities(), parseValue(), SCIP_DECL_CONSPARSE(), SCIPparseReal(), SCIPparseVarsPolynomial(), and varParse().

◆ SCIPstrCopySection()

void SCIPstrCopySection	(	const char *	str,
		char	startchar,
		char	endchar,
		char *	token,
		int	size,
		char **	endptr
	)

copies the first size characters between a start and end character of str into token, if no error occured endptr will point to the position after the read part, otherwise it will point to str

Parameters

str	string to search
startchar	character which defines the beginning
endchar	character which defines the ending
token	string to store the copy
size	size of the token char array
endptr	pointer to store the final string position if successfully parsed, otherwise `str`

Definition at line 10384 of file misc.c.

References NULL, SCIP_MAXSTRLEN, and SCIPdebugMessage.

Referenced by parseBounds(), parseDetails(), SCIP_DECL_CONSPARSE(), SCIPconsParse(), SCIPparseVarName(), and varParse().

SCIP

Detailed Description

Functions

Function Documentation

◆ SCIPmemccpy()

◆ SCIPprintSysError()

◆ SCIPstrtok()

◆ SCIPescapeString()

◆ SCIPsnprintf()

◆ SCIPstrncpy()

◆ SCIPstrToIntValue()

◆ SCIPstrToRealValue()

◆ SCIPstrCopySection()